Agreement between the EWGSOP2 and SDOC consensuses for sarcopenia in patients receiving hemodialysis: Findings of a cross sectional analysis from the SARC-HD study.

BACKGROUND: Differences in definitions and operational diagnoses for sarcopenia create difficulties in understanding the epidemiology of the disease. We examined the prevalences of sarcopenia using the revised European Working Group on Sarcopenia in Older People (EWGSOP2) and the Sarcopenia Definitions and Outcomes Consortium (SDOC) consensuses and analyzed their level of agreement in patients receiving hemodialysis. METHODS: Data from the SARCopenia trajectories and associations with clinical outcomes in patients receiving hemodialysis (SARC-HD) multicenter study in Brazil were analyzed. Muscle strength was assessed using handgrip strength, muscle mass by calf circumference, and physical performance by the 4-m gait speed test. Sarcopenia was diagnosed according to both the EWGSOP2 (low muscle strength plus low muscle mass) and the SDOC (low muscle strength plus low physical performance). The Cohen kappa statistic was used to determine the level of agreement between the consensuses. RESULTS: 838 patients (57.8 ± 15.0 years; 61% men) from 19 dialysis units were included. We found similar prevalences of sarcopenia between the consensuses (EWGSOP2, n = 128, 15.3%; SDOC, n = 105, 12.5%) but with weak agreement (50 of 233 patients, 21.5%; κ = 0.34, 95% CI 0.25-0.43). Agreement was also weak within age categories (≥60 years, κ = 0.34; <60 years, κ = 0.15; both P < 0.001). Of the 51 patients diagnosed by the EWGSOP2 criterion as having severe sarcopenia, all but 1 (98.0%) met the SDOC criterion for sarcopenia (κ = 0.61, 95% CI 0.52-0.70). Low muscle strength was more frequently diagnosed using the SDOC than with the EWGSOP2 (52.3% vs 25.9%). CONCLUSION: We found a weak agreement between the EWGSOP2 and SDOC consensuses for the diagnosis of sarcopenia in patients receiving hemodialysis. Although still weak, agreement was marginally better for older patients. These findings highlight the importance of a global and standardized conceptual diagnosis of sarcopenia.

Unveiling Hierarchical Self-Assembly of Triazolylferrocenyl Dendrimers: Producing Non-Traditional Intrinsically Green Fluorescent Vesosomes for Nanotheranostics.

Dendrimers and supramolecular chemistry continue to fascinate researchers due to the endless unrevealed potential of their combination. This study investigates the self-assembly process of a series of hydrophobic triazolylferrocenyl dendrimers in aqueous medium. Deep investigation through NMR spectroscopy, absorption UV-vis spectroscopy along with theoretical simulations demonstrates that the ferrocenyl moieties interact intramolecularly and intermolecularly driving the self-assembly process. Data obtained by DLS, NTA, SEM, TEM, and EF-TEM demonstrate that these dendrimers, in water, spontaneously self-assemble through a hierarchical process. The dendrimers first self-assemble into uniform nanovesicles, which in turn self-assemble into larger vesosomes. The resulting vesosomes emit green non-traditional intrinsic fluorescence, which is a property that emerged from the self-assembled architectures. The vesosomes are efficiently uptaken by cancer cells and induce significant cytotoxic activity against the cancer cell line MCF-7, up to the submicromolar concentration. Positive dendritic effects are identified in the fluorescence intensity and in the cytotoxic activity of the vesosomes, which follow the trend G0-9Fc < G1-27Fc < G2-81Fc. This work showcases the remarkable potential of combining the two dynamic fields of dendrimers and supramolecular chemistry, which resulted in green fluorescent vesosomes capable of performing the dual role of cell imaging and killing, with potential applications in nanotheranostics.

3D printing of strontium-enriched biphasic calcium phosphate scaffolds for bone regeneration.

Calcium phosphate (CaP) scaffolds doping with therapeutic ions are one of the focuses of recent bone tissue engineering research. Among the therapeutic ions, strontium stands out for its role in bone remodeling. This work reports a simple method to produce Sr-doped 3D-printed CaP scaffolds, using Sr-doping to induce partial phase transformation from ß-tricalcium phosphate (ß-TCP) to hydroxyapatite (HA), resulting in a doped biphasic calcium phosphate (BCP) scaffold. Strontium carbonate (SrCO3) was incorporated in the formulation of the 3D-printing ink, studying ß-TCP:SrO mass ratios of 100:0, 95:5, and 90:10 (named as ß-TCP, ß-TCP/5-Sr, and ß-TCP/10-Sr, respectively). Adding SrCO3 in the 3D-printing ink led to a slight increase in viscosity but did not affect its printability, resulting in scaffolds with a high printing fidelity compared to the computational design. Interestingly, Sr was incorporated into the lattice structure of the scaffolds, forming hydroxyapatite (HA). No residual SrO or SrCO3 were observed in the XRD patterns of any composition, and HA was the majority phase of the ß-TCP/10-Sr scaffolds. The addition of Sr increased the compression strength of the scaffolds, with both ß-TCP/5-Sr and ß-TCP/10-Sr performing better than the ß-TCP. Overall, ß-TCP/5-Sr presented higher mineralized nodules and mechanical strength, while ß-TCP scaffolds presented superior cell viability. The incorporation of SrCO3 in the ink formulation is a viable method to obtain Sr-BCP scaffolds. Thus, this approach could be explored with other CaP scaffolds aiming to optimize their performance and the addition of alternative therapeutic ions.

Inflammatory Profile of Chronic Rhinosinusitis With Nasal Polyp Patients in Brazil: Multicenter Study.

OBJECTIVES: To determine the inflammatory profile of CRSwNP in Brazil and characterize the subgroups of CRSwNP patients in this population through cluster analysis. STUDY DESIGN: Multicenter cross-sectional study involving 15 centers representing different regions of Brazil. SUBJECTS AND METHODS: Clinical data of 166 patients and 80 controls, aged 18 to 70 years old, number of surgeries for CRS, history of asthma and aspirin sensitivity, and Lund-Mackay scores on CT scans. During nasal endoscopy, we obtained the Lund-Kennedy scores and collected 2 samples of nasal polyps: one for eosinophil and neutrophil tissue counts and one to quantify different cytokines. RESULTS: 79.6% of our patients had 10 or more eosinophils/HPF. CRSwNP groups exhibited significantly lower concentrations of TNF-alpha and significantly higher concentrations of IFN-gamma, CCL11/Eotaxin, CCL24/Eotaxin-2/MPIF-2, and CCL26/Eotaxin-3 versus the control group (Kruskal-Wallis test). Comparison between CRSwNP groups (≥10 vs <10 eosinophils/HPF) showed no difference in cytokine concentration (Mann-Whitney test). Hierarchical clustering and PCA according to cytokine concentrations revealed 2 main Clusters, with a significantly higher concentration of all cytokines in Cluster 1 (n = 35) than in Cluster 2 (n = 121), except IL-6 and IL-33 (Mann-Whitney test). According to ROC curve analysis the best cut-off to differentiate the 2 clusters was 43 eosinophils/HPF. The group with ≥43 presented a higher prevalence of men and a higher Lund-Mackay score (Mann-Whitney test). CONCLUSIONS: CRSwNP patients in Brazil present mixed inflammation, with 2 distinct groups (high and low inflammatory pattern) that can be distinguished by tissue eosinophilia of ≥43 eosinophils/HPF cut-off in nasal polyps.

Top 100 most-cited scientific articles in regenerative endodontics 2019-2023: A bibliometric analysis.

BACKGROUND: Bibliometric analysis is a critical indicator of the influence and relevance of scientific papers, whilst also highlighting key contributors and gaps in knowledge in a scientific field. OBJECTIVES: To update and analyse the 100 most-cited papers in regenerative endodontics from 2019 to 2023. METHODS: A search of the most-cited recent papers focusing on regenerative endodontics using journals included in the category, 'Dentistry, Oral Surgery & Medicine', in the Clarivate Web of Science database from 2019 to 2023 was performed. Three researchers conducted the study selection and data extraction. Data extraction included publication title and year, authors, number and mean number of citations, institution, country and continent, study design, journal title, keywords and research topic. Citation counts were also collected in Google Scholar and Scopus databases. Graphical bibliometric networks were created using VOSviewer software. RESULTS: The number of citations of the 100 most-cited articles ranged from 6 to 85. Most were published in 2020 (n = 48), principally in the Journal of Endodontics (47%), followed by International Endodontic Journal (13%), Journal of Dental Research (6%) and Dental Materials (6%). Laboratory study was the most common study design amongst the included papers (n = 47), followed by narrative reviews (n = 17) and observational studies (n = 16). The most frequent first author on the top three most-cited papers was Hacer Aksel, whilst Adham A. Azim (n = 6; 89 citations) contributed most to the top 100 articles. The institution from which most articles originated was the University of Hong Kong (China) (n = 5; 81 citations), whereas the corresponding authors were predominantly from the United States of America (USA) (n = 31; 560 citations). The VOSviewer map of co-authorship demonstrated research collaborative clusters. 'Regenerative endodontics' and 'stem-cells' were the most employed keywords (37 and 36 occurrences respectively). DISCUSSION: The current study was designed not only to showcase the most influential papers in regenerative endodontics since 2019 but also to provide a better understanding of global research in this area over the last five years. CONCLUSIONS: This bibliometric analysis highlighted papers, authors, institutions and keywords in regenerative endodontics. The 100 most-cited papers primarily consisted of laboratory studies published in the USA, focusing on evaluating biomaterials and scaffold design strategies in contact with stem cells. Clinical studies and systematic reviews representing higher levels of scientific evidence are currently not the most influential in the regenerative endodontic field.

Functionalization of PCL-Based Fiber Scaffolds with Different Sources of Calcium and Phosphate and Odontogenic Potential on Human Dental Pulp Cells.

This study investigated the incorporation of sources of calcium, phosphate, or both into electrospun scaffolds and evaluated their bioactivity on human dental pulp cells (HDPCs). Additionally, scaffolds incorporated with calcium hydroxide (CH) were characterized for degradation, calcium release, and odontogenic differentiation by HDPCs. Polycaprolactone (PCL) was electrospun with or without 0.5% w/v of calcium hydroxide (PCL + CH), nano-hydroxyapatite (PCL + nHA), or ß-glycerophosphate (PCL + ßGP). SEM/EDS analysis confirmed fibrillar morphology and particle incorporation. HDPCs were cultured on the scaffolds to assess cell viability, adhesion, spreading, and mineralized matrix formation. PCL + CH was also evaluated for gene expression of odontogenic markers (RT-qPCR). Data were submitted to ANOVA and Student's t-test (α = 5%). Added CH increased fiber diameter and interfibrillar spacing, whereas ßGP decreased both. PCL + CH and PCL + nHA improved HDPC viability, adhesion, and proliferation. Mineralization was increased eightfold with PCL + CH. Scaffolds containing CH gradually degraded over six months, with calcium release within the first 140 days. CH incorporation upregulated DSPP and DMP1 expression after 7 and 14 days. In conclusion, CH- and nHA-laden PCL fiber scaffolds were cytocompatible and promoted HDPC adhesion, proliferation, and mineralized matrix deposition. PCL + CH scaffolds exhibit a slow degradation profile, providing sustained calcium release and stimulating HDPCs to upregulate odontogenesis marker genes.

Recent Developments in Lateral Flow Assays for Salmonella Detection in Food Products: A Review.

Salmonellosis is a disease transmitted by contaminated food and is one of the leading causes of infections worldwide, making the early detection of Salmonella of crucial importance for public health. However, current detection methods are laborious and time-consuming, thus impacting the entire food supply chain and leading to production losses and economic sanctions. To mitigate these issues, a number of different biosensors have been developed, including lateral flow assays (LFAs), which have emerged as valuable tools in pathogen detection due to their portability, ease of use, time efficiency, and cost effectiveness. The performance of LFAs has been considerably enhanced by the development of new nanomaterials over the years. In this review, we address the principles and formats of the assay and discuss future prospects and challenges with an emphasis on LFAs developed for the detection of different Salmonella serovars in food.

Low-Load x High-Load Resistance Exercise: Greater Cell Swelling After a Training Session.

Cell swelling caused by resistance training is proposed to provide an anabolic stimulus for muscle growth and it is believed that these effects are heightened with the use of low loads. The purpose of this study was to compare the acute effects of two volume-equated resistance training (RT) protocols, low-load (LL) versus high-load (HL), on elbow flexor muscles thickness, arm circumference, and blood lactate concentration in well-trained individuals. Eight resistance-trained males performed the following two RT protocols involving unilateral elbow flexion of the dominant arm: i) LL, four sets with 50% 1 repetition-maximum [1 RM] and ii) HL, ten sets with 85% 1 RM until failure, and equated volume. Pre- and post-session measurements included muscle thickness of the elbow flexors (biceps brachii and brachialis), upper arm circumference, and blood lactate concentration. Significant pre- to post-session increases were found in both protocols for muscle thickness (F (1, 28) = 11.74, p = 0.0019), and blood lactate (F (1, 28) = 35.55, p < 0.0001); no statistically significant differences were observed between conditions, however, the magnitude of increases favored LL. Significant between-condition differences favoring LL were observed for total repetitions (p = 0.007), time under tension (p = 0.007), and training density (p = 0.007). These results suggest that LL training promotes superior post-session increases in muscle thickness, indicating that RT protocols with longer times under tension and densities are beneficial when the goal is to promote acute cell swelling.

Evaluación prenatal del síndrome de heterotaxia por ecografía fetal / Prenatal assessment of heterotaxy syndrome by fetal ultrasound

Resumen El síndrome de heterotaxia es una entidad de baja prevalencia, que tiene su origen durante el desarrollo embrionario, que afecta a diversos órganos y sistemas. Es por ello que su diagnóstico representa un reto durante la gestación. El pronóstico dependerá principalmente de las malformaciones cardiacas asociadas. Se presenta el caso de un paciente con diagnóstico de síndrome de heterotaxia durante el primer trimestre. Se detallan los patrones ecográficos obtenidos durante el tamizaje del primer trimestre que auxiliaron a integrar el diagnóstico de esta entidad, así como las anomalías cardiacas asociadas. El manejo debe contemplar a un equipo multidisciplinario, el cual brinde un manejo oportuno, que será principalmente quirúrgico, enfocado en las malformaciones cardiacas.

Abstract Heterotaxy syndrome is a low prevalence entity, which originates during embryonic development, affecting diverse organs and systems. That is why its diagnosis represents a challenge during pregnancy. The prognosis depends mainly on the associated cardiac malformations. The case of a patient with a diagnosis of heterotaxy syndrome during the first trimester is presented. The ultrasound patterns obtained during the first trimester screening that helped to integrate the diagnosis of this entity are detailed, as well as the associated cardiac anomalies. Management must contemplate a multidisciplinary team, which provides timely management, which will be mainly surgical, focused on cardiac malformations.

Self-assembling peptide-laden electrospun scaffolds for guided mineralized tissue regeneration.

OBJECTIVES: Electrospun scaffolds are a versatile biomaterial platform to mimic fibrillar structure of native tissues extracellular matrix, and facilitate the incorporation of biomolecules for regenerative therapies. Self-assembling peptide P11-4 has emerged as a promising strategy to induce mineralization; however, P11-4 application has been mostly addressed for early caries lesions repair on dental enamel. Here, to investigate P11-4's efficacy on bone regeneration, polymeric electrospun scaffolds were developed, and then distinct concentrations of P11-4 were physically adsorbed on the scaffolds. METHODS: P11-4-laden and pristine (P11-4-free) electrospun scaffolds were immersed in simulated body fluid and mineral precipitation identified by SEM. Functional groups and crystalline phases were analyzed by FTIR and XRD, respectively. Cytocompatibility, mineralization, and gene expression assays were conducted using stem cells from human exfoliated deciduous teeth. To investigate P11-4-laden scaffolds potential to induce in vivo mineralization, an established rat calvaria critical-size defect model was used. RESULTS: We successfully synthesized nanofibrous (∼ 500 nm fiber diameter) scaffolds and observed that functionalization with P11-4 did not affect the fibers' diameter. SEM images indicated mineral precipitation, while FTIR and XRD confirmed apatite-like formation and crystallization for P11-4-laden scaffolds. In addition, P11-4-laden scaffolds were cytocompatible, highly stimulated cell-mediated mineral deposition, and upregulated the expression of mineralization-related genes compared to pristine scaffolds. P11-4-laden scaffolds led to enhanced in vivo bone regeneration after 8 weeks compared to pristine PCL. SIGNIFICANCE: Electrospun scaffolds functionalized with P11-4 are a promising strategy for inducing mineralized tissues regeneration in the craniomaxillofacial complex.

Synthesis of Carbon Nanodots from Sugarcane Syrup, and Their Incorporation into a Hydrogel-Based Composite to Fabricate Innovative Fluorescent Microstructured Polymer Optical Fibers.

Carbon nanodots (CNDs) are interesting materials due to their intrinsic fluorescence, electron-transfer properties, and low toxicity. Here, we report a sustainable, cheap, and scalable methodology to obtain CNDs from sugarcane syrup using a domestic microwave oven. The CNDs were characterized by infrared spectroscopy, dynamic light scattering, atomic force microscopy, absorption, and emission spectroscopies. The CNDs have 3 nm in diameter with low polydispersity and are fluorescent. A fluorescent hydrogel-CNDs composite was obtained using gelatin polypeptide as the polymeric matrix. The new hydrogel-CNDs composite was incorporated in the cavities of a double-clad optical fiber using an innovative approach that resulted in a microstructured polymer optical fiber with intrinsic fluorescence. This work shows a promising alternative for the fabrication of fluorescent materials since the CNDs synthesis is sustainable and environmentally friendly. These CNDs might substitute the rare-earth and other heavy metals of high cost and toxicity, which are usually incorporated in double-clad fibers for applications on lasers, amplifiers, and spectroscopy.

Photocrosslinkable methacrylated gelatin hydrogel as a cell-friendly injectable delivery system for chlorhexidine in regenerative endodontics.

OBJECTIVES: This work sought to formulate photocrosslinkable chlorhexidine (CHX)-laden methacrylated gelatin (CHX/GelMA) hydrogels with broad spectrum of action against endodontic pathogens as a clinically viable cell-friendly disinfection therapy prior to regenerative endodontics procedures. METHODS: CHX/GelMA hydrogel formulations were successfully synthesized using CHX concentrations between 0.12 % and 5 % w/v. Hydrogel microstructure was evaluated by scanning electron microscopy (SEM). Swelling and enzymatic degradation were assessed to determine microenvironmental effects. Compression test was performed to investigate the influence of CHX incorporation on the hydrogels' biomechanics. The antimicrobial and anti-biofilm potential of the formulated hydrogels were assessed using agar diffusion assays and a microcosms biofilm model, respectively. The cytocompatibility was evaluated by exposing stem cells from human exfoliated deciduous teeth (SHEDs) to hydrogel extracts (i.e., leachable byproducts obtained from overtime hydrogel incubation in phosphate buffer saline). The data were analyzed using One- and Two-way ANOVA and Tukey's test (α = 0.05). RESULTS: CHX/GelMA hydrogels were effectively prepared. NMR spectroscopy confirmed the incorporation of CHX into GelMA. The addition of CHX did not change the micromorphology (pore size) nor the swelling profile (p > 0.05). CHX incorporation reduced the degradation rate of the hydrogels (p < 0.001); whereas, it contributed to increased compressive modulus (p < 0.05). Regarding the antimicrobial properties, the incorporation of CHX showed a statistically significant decrease in the number of bacteria colonies at 0.12 % and 0.5 % concentration (p < 0.001) and completely inhibited the growth of biofilm at concentration levels 1 %, 2 %, and 5 %. Meanwhile, the addition of CHX, regardless of the concentration, did not lead to cell toxicity, as cell viability values were above 70 %. SIGNIFICANCE: The addition of CHX into GelMA showed significant antimicrobial action against the pathogens tested, even at low concentrations, with the potential to be used as a cell-friendly injectable drug delivery system for root canal disinfection prior to regenerative endodontics.

Lateral flow assay applied to pesticides detection: recent trends and progress.

Devices based on lateral flow assay (LFA) have been gaining more and more space in the detection market mainly due to their simplicity, speed, and low cost. These devices have excellent sensing format versatility and make these strips an ideal choice for field applications. The COVID-19 pandemic boosted the democratization of this method as a "point of care testing" (POCT), and the trend is that these devices become protagonists for the monitoring of pesticides in the environment. However, designing LFA devices for detecting and monitoring pesticides in the environment is still a challenge. This is because analytes are small molecules and have only one antigenic determinant, which makes it difficult to apply direct immunoassays. Furthermore, most LFA devices provide only qualitative or semi-quantitative results and have a limited number of applications in multi-residue analysis. Here, we present the state of the art on the use of LFA in the environmental monitoring of pesticides. Based on well-documented results, we review all available LFA formats and strategies for pesticide detection, which may have important implications for the future of monitoring pesticides in the environment. The main advances, challenges, and perspectives of these devices for a direction in this field of study are also presented.

Influence of ethylenediaminetetraacetic acid on regenerative endodontics: A systematic review.

BACKGROUND: The effects of ethylenediaminetetraacetic acid (EDTA) on regenerative endodontic procedures (REPs) are controversial, because, despite releasing growth factors from dentine, some studies show negative effects on cell behaviour. OBJECTIVES: The aim of the study was to investigate the influence of the use of EDTA in REP on the growth factors' release, cell behaviour and tissue regeneration. METHODS: A systematic search was conducted (PubMed/Medline, Scopus, Cochrane Library, Web of Science, Embase, OpenGrey and reference lists) up to February 2021. Only in vivo and in vitro studies evaluating the effects of EDTA on the biological factors of dentine, pulp/periapical tissues and cell behaviour were eligible. Studies without a control group or available full text were excluded. The growth factors' release was the primary outcome. Risk of bias in the in vitro and in vivo studies was performed according to Joanna Briggs Institute's Checklist and SYRCLE's RoB tool, respectively. RESULTS: Of the 1848 articles retrieved, 36 were selected. Amongst these, 32 were in vitro, three animal studies and one with both models. The EDTA concentrations ranged from 3% to 15%, at different times. Regarding growth factors' release (17 studies), 15 studies found significant transforming growth factor (TGF)-ß release after dentine conditioning with EDTA, and most found no influence on vascular endothelial growth factor release. Regarding cell behaviour (26 studies), eight studies showed no influence of EDTA-treated dentine on cell viability, whereas, five, nine and six studies showed higher cell migration, adhesion and differentiation respectively. No influence of EDTA conditioning was observed in animal studies. In vitro studies had a low risk of bias, whereas animal studies had high risk of bias. Meta-analysis was unfeasible. DISCUSSION: This review found that EDTA increased TGF-ß release and improved cell activity. However, well-designed histological analyses using immature teeth models are needed. CONCLUSIONS: High-quality in vitro evidence suggests that EDTA-treated dentine positively influences TGF-ß release, cell migration, attachment and differentiation; further research to evaluate its influence on tissue regeneration is necessary due to low methodological quality of the animal studies.

Isokinetic strength of shoulder rotator muscles in powerlifters: correlation between isometric and concentric muscle actions.

BACKGROUND: Isokinetic strength has been useful to assess muscle function related to sports and prevent injuries. The present study measured the isokinetic isometric and concentric shoulder rotators strength, agonist/antagonist ratio, and examined the relationships between isometric and concentric peak torque, and agonist/antagonist ratio in powerlifters compared to a control group. METHODS: The participants were divided into two groups: powerlifters group (N.=14) and physically active group (N.=9). Participants' were evaluated on isokinetic dynamometer for isometric, and concentric (two velocities, 60°/s and 180°/s) strength of shoulder external (ER) internal rotation (IR). Isometric contractions lasted 10 seconds, and concentric modes were 5 repetitions. RESULTS: Bilateral significant differences, between dominant and non-dominant side, were found in ER peak torque at isometric mode in powerlifters group (P=0.021). Powerlifters showed higher IR peak torque at isometric mode in dominant (P=0.040) and non-dominant side (P=0.014) than physically active group. Pearson correlations between isometric peak torque and concentric velocities ranged between 0.49 and 0.89 for powerlifters group, and between 0.73 and 0.93 for physically active group. For agonist/antagonist ratio, pearson correlation ranged between 0.47 and 0.83 for powerlifters group, and between 0.48 and 0.86 for physically active group. CONCLUSIONS: The bilateral differences in ER movement at isometric mode in powerlifters suggest that exercises for shoulder rotators must be included on training for joint safety and balance between sides despite isometric shoulder rotators strength in powerlifters was higher than physically active individuals. Results presented positive correlation between both muscle actions, isometric and concentric, in peak torque and agonist/antagonist ratio.

Self-Assembly of a Triazolylferrocenyl Dendrimer in Water Yields Nontraditional Intrinsic Green Fluorescent Vesosomes for Nanotheranostic Applications.

The promising field of nanomedicine stimulates a continuous search for multifunctional nanotheranostic systems for imaging and drug delivery. Herein, we demonstrate that application of supramolecular chemistry's concepts in dendritic assemblies can enable the formation of advanced dendrimer-based nanotheranostic devices. A dendrimer bearing 81 triazolylferrocenyl terminal groups adopts a more compact shell-like structure in polar solvents with the ferrocenyl peripheral groups backfolding toward the hydrophobic dendrimer interior, while exposing the more polar triazole moieties as the dendritic shell. Akin to lipids, the compact dendritic structure self-assembles into uniform nanovesicles that in turn self-assemble into larger vesosomes in water. The vesosomes emit green nontraditional intrinsic fluorescence (NTIL), which is an emerging property as there are no classical fluorophores in the dendritic macromolecular structure. This work confirms the hypothesis that the NTIL emission is greatly enhanced by rigidification of the supramolecular assemblies containing heteroatomic subluminophores (HASLs) and by the presence of electron rich functional groups on the periphery of dendrimers. This work is the first one detecting NTIL in ferrocenyl-terminated dendrimers. Moreover, the vesosomes are stable in biological medium, are uptaken by cells, and show cytotoxic activity against cancer cells. Accordingly, the self-organization of these dendrimers into tertiary structures promotes the emergence of new properties enabling the same component, in this case, ferrocenyl group, to function as both antitumoral drug and fluorophore.

Platform technologies for regenerative endodontics from multifunctional biomaterials to tooth-on-a-chip strategies.

OBJECTIVES: The aim of this review is to highlight recent progress in the field of biomaterials-mediated dental pulp tissue engineering. Specifically, we aim to underscore the critical design criteria of biomaterial platforms that are advantageous for pulp tissue engineering, discuss models for preclinical evaluation, and present new and innovative multifunctional strategies that hold promise for clinical translation. MATERIALS AND METHODS: The current article is a comprehensive overview of recent progress over the last 5 years. In detail, we surveyed the literature in regenerative pulp biology, including novel biologic and biomaterials approaches, and those that combined multiple strategies, towards more clinically relevant models. PubMed searches were performed using the keywords: "regenerative dentistry," "dental pulp regeneration," "regenerative endodontics," and "dental pulp therapy." RESULTS: Significant contributions to the field of regenerative dentistry have been made in the last 5 years, as evidenced by a significant body of publications. We chose exemplary studies that we believe are progressive towards clinically translatable solutions. We close this review with an outlook towards the future of pulp regeneration strategies and their clinical translation. CONCLUSIONS: Current clinical treatments lack functional and predictable pulp regeneration and are more focused on the treatment of the consequences of pulp exposure, rather than the restoration of healthy dental pulp. CLINICAL RELEVANCE: Clinically, there is great demand for bioinspired biomaterial strategies that are safe, efficacious, and easy to use, and clinicians are eager for their clinical translation. In particular, we place emphasis on strategies that combine favorable angiogenesis, mineralization, and functional tissue formation, while limiting immune reaction, risk of microbial infection, and pulp necrosis.

Age- and Gender-Related Changes in Physical Function in Community-Dwelling Brazilian Adults Aged 50 to 102 Years.

BACKGROUND AND PURPOSE: Cutoff points for physical function tests are commonly used in clinical practice for the evaluation, monitoring, and treatment of older adults. Previous studies have shown that, while age-related patterns of muscle strength change are similar between ethnic groups, strength values differ significantly independent of age. Whether the same applies to other physical function tests is presently unclear. This study investigated age- and gender-related changes of performance on a battery of physical function tests in Brazilian community dwellers. METHODS: The study followed a cross-sectional design. Participants were community-dwelling adults. Candidates were considered eligible if they were 18 years or older, lived independently, and possessed sufficient physical and cognitive abilities to perform all of the measurements required by the protocol. Physical function tests included isometric handgrip (IHG), 5 times sit-to-stand (5×STS) test, Timed Up and Go, 1-leg stance, and walking speed (WS) at usual and fast pace. RESULTS: Two-thousand eight-hundred and four people were enrolled. Mean age was 68.0 (7.0) years (range 50-102 years), and 2262 (80.7%) were women. Men displayed better IHG and balance, while women showed higher performance on the 5×STS and WS tests. A gender-specific pattern of decline in physical performance was observed. Specifically, women showed a linear age-dependent decline in all tests. In men, only in the IHG, 1-leg stance, and WS test at a fast pace was there a linear decline with age. In both genders, the lowest mean values of physical function tests were higher than the proposed cutoffs for sarcopenia. DISCUSSION AND CONCLUSIONS: Our findings indicate that the performance on different physical function tests decreases with advancing age in Brazilian adults, following a gender-specific pattern. In none of the tests did the lowest mean values reach the cutoffs for sarcopenia. This suggests that region-specific cutoffs might be necessary to identify older people at risk of adverse events.

The role of nanohydroxyapatite on the morphological, physical, and biological properties of chitosan nanofibers.

OBJECTIVES: This study aimed to evaluate the effects of nanohydroxyapatite (nHAp) particles on the morphological, chemical, physical, and biological properties of chitosan electrospun nanofibers. MATERIALS AND METHODS: nHAp particles with a 1.67 Ca/P ratio were synthesized via the aqueous precipitation method, incorporated into chitosan polymer solution (0.5 wt%), and electrospun into nHAp-loaded fibers (ChHa fibers). Neat chitosan fibers (nHAp-free, Ch fibers) were used as the control. The electrospun fiber mats were characterized using morphological, topographical, chemical, thermal, and a range of biological (antibacterial, antibiofilm, cell viability, and alkaline phosphatase [ALP] activity) analyses. Data were analyzed using ANOVA and Tukey's test (α = 0.05). RESULTS: ChHa fibers demonstrated a bead-like morphology, with thinner (331 ± 110 nm) and smoother (Ra = 2.9 ± 0.3 µm) distribution as compared to the control fibers. Despite showing similar cell viability and ALP activity to Ch fibers, the ChHa fibers demonstrated greater antibacterial potential against most tested bacteria (except for P. intermedia), and higher antibiofilm activity against P. gingivalis biofilm. CONCLUSIONS: The incorporation of nHAp particles did not jeopardize the overall morphology, topography, physical, and biological characteristics of the chitosan nanofibers. CLINICAL RELEVANCE: The combination of nHAp particles with chitosan can be used to engineer bioactive, electrospun composite nanofibers with potential applications in regenerative dentistry.

Development and properties of endodontic resin sealers with natural oils.

OBJECTIVES: To synthesize and evaluate the physicochemical, antimicrobial, and cytocompatibility properties of experimental resin-based endodontic sealers containing butia or copaiba natural oils. METHODS: Experimental groups contained butia (Butia capitata) at 0.5 % (B0.5), 1 % (B1), 2 % (B2), and copaiba (Copaifera spp.) at 0.5 % (C0.5), 1 % (C1), and 2 % (C2). The control group contained no added oils (experimental material, EM) and the commercial group was a methacrylate-based resin material (RealSeal™, SybronEndo Corporation, Orange, CA, USA). Degree of conversion, film thickness, setting time, flow, water sorption and solubility, and radiopacity were measured. Meanwhile, antimicrobial (modified direct contact test) and cytotoxicity assays of the experimental groups and controls were performed. One-way ANOVA was used to determine the effect of the independent variable (material) on the degree of conversion, film thickness, radiopacity, flow, setting time, water sorption and solubility, and cytotoxicity. For antimicrobial assays, data were analyzed using two-way ANOVA and Sidák's test. RESULTS: The experimental groups containing natural oils showed higher values of degree of conversion, and lowest water sorption and solubility. EM, B0.5, B1, B2, and RS showed similar film thicknesses. The flow values were statistically similar in all groups. The experimental groups showed adequate cell compatibility. Copaiba oil at 2% increased the antimicrobial effect after 1 and 24 h (p < 0.05). The incorporation of butia or copaiba resulted in a slight modification in some physicochemical properties of the experimental resin sealers. CONCLUSION: Novel resin sealers containing natural oils are a promising alternative for endodontics, because of their good physicochemical properties, antimicrobial effects, and cytocompatibility when compared to a commercially available sealer. CLINICAL SIGNIFICANCE: Endodontic sealers containing butia or copaiba had satisfactory cytocompatibility, antimicrobial effects, and adequate physicochemical properties.