The potential of nanofibrillated cellulose from Hevea brasiliensis to produce films for bio-based packaging.

Cellulose micro/nanofibril (MNFC) films are an interesting alternative to plastic-based films for application in biodegradable packaging. In this study, we aimed to produce and characterize MNFC films obtained from alkaline-pretreated rubberwood (Hevea brasiliensis) waste and Eucalyptus sp. commercial pulp. MNFC and films were evaluated regarding microstructure; crystallinity; stability; and physical, optical, mechanical, and barrier properties. A combined quality index (QI) was also calculated. Eucalyptus MNFC suspensions were more stable than H. brasiliensis. Both films had a hydrophobic surface (>90°) and high grease resistance (oil kit 12). H. brasiliensis films had lower transparency (26.4 %) and high crystallinity (∼89 %), while Eucalyptus films had lower permeability and higher mechanical strength. The QI of MNFC was 51 ± 5 for H. brasiliensis and 55 ± 4 for Eucalyptus, showing that both types of raw material have potential for application in the packaging industry and in the reinforcement of composites, as well as for high value-added applications in products made from special materials.

Cytocompatible and osteoinductive cotton cellulose nanofiber/chitosan nanobiocomposite scaffold for bone tissue engineering.

Natural polymeric nanobiocomposites hold promise in repairing damaged bone tissue in tissue engineering. These materials create an extracellular matrix (ECM)-like microenvironment that induces stem cell differentiation. In this study, we investigated a new cytocompatible nanobiocomposite made from cotton cellulose nanofibers (CNFs) combined with chitosan polymer to induce osteogenic stem cell differentiation. First, we characterized the chemical composition, nanotopography, swelling properties, and mechanical properties of the cotton CNF/chitosan nanobiocomposite scaffold. Then, we examined the biological characteristics of the nanocomposites to evaluate their cytocompatibility and osteogenic differentiation potential using human mesenchymal stem cells derived from exfoliated deciduous teeth. The results showed that the nanobiocomposite exhibited favorable cytocompatibility and promoted osteogenic differentiation of cells without the need for chemical inducers, as demonstrated by the increase in alkaline phosphatase activity and ECM mineralization. Therefore, the cotton CNF/chitosan nanobiocomposite scaffold holds great promise for bone tissue engineering applications.

Mining waste and coconut fibers as an eco-friendly reinforcement for the production of concrete blocks.

Using mineral and agro-industrial wastes associated with the cement matrix can add value and guarantee suitable properties for reinforced composites. This research aimed to evaluate the effect of the incorporation of quartzite and coconut fibers on masonry blocks' physical, mechanical, and thermal properties. Quartzite was evaluated replacing 0%, 25%, 50%, 75%, and 100% of the sand, whereas the coconut fibers were added in a proportion of 2.5% of the volume of gravel. Quartzite residues were analyzed regarding their granulometry, chemical composition, and pozzolanicity. The block initial formulation (control) was: 8.2% cement, 45.9% sand, and 45.9% gravel. The cement was cured at room temperature for 28 days. Subsequently, the blocks were subjected to the characterization of physical, mechanical, and thermal properties. Coconut fibers presented a low percentage of extractives, with a low inhibition index (1.93%), reducing their effect on cement hardening. The increase in the content of quartzite incorporated provided a reduction in bulk density and an increase in porosity (from 11.7 to 16.0%) and water absorption after 24 h (from 7.0 to 8.5%). The compressive strength was reduced from 50% with the insertion of the quartzite. The quartzite and coconut fibers reduced the concrete's thermal conductivity, providing essential reflections for the performance of the blocks in terms of thermal comfort in built environments. Further, incorporating these materials provided the potential to obtain blocks with characteristics of resistance and offering possible thermal comfort, besides contributing as an option for a destination for these mineral and agro-industrial wastes.

Antifungal and physicochemical properties of Ocimum essential oil loaded in poly(lactic acid) nanofibers.

Poly(lactic acid) (PLA) nanofibres containing different proportions of the essential oils from Ocimum basilicum L. and Ocimum gratissimum L. were prepared by solution blow spinning method. The essential oils were extracted by hydrodistillation and characterized by gas chromatography. MEV, contact angle, DSC and FTIR were used to characterize the nanofibres. The effect of bioative nanofibres on the growth of the fungus and on the production of ochratoxin A were evaluated using the fumigation test. Linalool, 1·8-cineole and camphor were the principal components of the essential oil from O. basilicum, and eugenol was the principal constituent in the oil from O. gratissimum. An increase in the average diameter of the nanofibres was observed with the addition of the essential oils. The essential oils acted as a plasticizer, resulting in a reduction in the crystallinity of the PLA. The encapsulation of essential oils in PLA nanofibres was verified by FTIR. An effective antifungal and antimicotoxygenic activity against Aspergillus ochraceus and Aspergillus westerdjikiae was observed for the bioative nanofibres. These results confirm the potential of PLA nanofibres containing the essential oils for the control of toxigenic fungi that cause the deterioration of food and are harmful to human health.

Bio-based films/nanopapers from lignocellulosic wastes for production of added-value micro-/nanomaterials.

The growing demand for products with lower environmental impact and the extensive applicability of cellulose nanofibrils (CNFs) have received attention due to their attractive properties. In this study, bio-based films/nanopapers were produced with CNFs from banana tree pseudostem (BTPT) wastes and Eucalyptus kraft cellulose (EKC) and were evaluated by their properties, such as mechanical strength, biodegradability, and light transmittance. The CNFs were produced by mechanical fibrillation (after 20 and 40 passages) from suspensions of BTPT (alkaline pre-treated) and EKC. Films/nanopapers were produced by casting from both suspensions with concentrations of 2% (based in dry mass of CNF). The BTPT films/nanopapers showed greater mechanical properties, with Young's modulus and tensile strength around 2.42 GPa and 51 MPa (after 40 passages), respectively. On the other hand, the EKC samples showed lower disintegration in water after 24 h and biodegradability. The increase in the number of fibrillation cycles produced more transparent films/nanopapers and caused a significant reduction of water absorption for both raw materials. The permeability was similar for the films/nanopapers from BTPT and EKC. This study indicated that attractive mechanical properties and biodegradability, besides low cost, could be achieved by bio-based nanomaterials, with potential for being applied as emulsifying agents and special membranes, enabling more efficient utilization of agricultural wastes.

Manufacture and performance of peanut skin cellulose nanocrystals

Due to their remarkable characteristics, cellulose nanocrystals are strategic materials that has various industrial applications, and are capable of being produced from vegetable fibers derived from the discards of agricultural practices. Peanut(Arachis hypogaea L.) peel is a residue considered of low commercial value and high polluting potential that needs new applications in order to mitigate these problems. Thus, in this study the feasibility of extracting cellulose nanocrystals was investigated. Two chemical routes were followed for this extraction. In the first, the fibers were bleached before acid hydrolysis whereas mercerization was used in the second. The second route was more efficient, as it enabled the elimination of proteins and phenolic compounds, which could be confirmed through solid-state 13C nuclear magnetic resonance (NMR) that revealed no signs of lignin residues. The cellulose nanocrystals composed of mainly type I cellulose presented a high degree of crystallinity index, 75 %, a thermal stability up to 200 °C, considerable stability in suspension (zeta potential of -48.1 ± 2.1 mV), and an aspect ratio of 125. They represent options that could add value to this residue, which would ease environmental problems.

Genetic diversity associated with natural rubber quality in elite genotypes of the rubber tree.

The objective of this study was to evaluate the genetic variability of natural rubber latex traits among 44 elite genotypes of the rubber tree [Hevea brasiliensis (Willd. ex Adr. de Juss.) Müell. Arg.]. Multivariate analysis and machine learning techniques were used, targeting the selection of parents that demonstrate superior characters. We analyzed traits related to technological or physicochemical properties of natural rubber latex, such as Wallace plasticity (P0), the plasticity retention index [PRI (%)], Mooney viscosity (VR), ash percentage (Ash), acetone extract percentage (AE), and nitrogen percentage (N), to study genetic diversity. Multivariate [unweighted pair group method with arithmetic means (UPGMA) and Tocher)] and machine learning techniques [K-means and Kohonen's self-organizing maps (SOMs)] were employed. The genotypes showed high genetic variability for some of the evaluated traits. The traits PRI, Ash, and PO contributed the most to genetic diversity. The genotypes were classified into six clusters by the UPGMA method, and the results were consistent with the Tocher, K-means and SOM results. PRI can be used to improve the industrial potential of clones. The clones IAC 418 and PB 326 were the most divergent, followed by IAC 404 and IAC 56. These genotypes and others from the IAC 500 and 400 series could be used to start a breeding program. These combinations offer greater heterotic potential than the others, which can be used to improve components of rubber latex quality. Thus, it is important to consider the quality of rubber latex in the early stage of breeding programs.

Study of morphological properties and rheological parameters of cellulose nanofibrils of cocoa shell (Theobroma cacao L.).

Cocoa shell was evaluated as a precursor for cellulose nanofibrils (NFCs) using mechanical defibrillation. Its morphology was analysed using optical microscopy and scanning electron microscopy with field emission. Rheological and mechanical behaviour were evaluated through flow curves with a strain rate ranging from 0 to 300 s-1 at 25 °C and by means of oscillatory frequency sweeps (0.01 Hz-10 Hz) and shear stress (3 Pa). The thermal-mechanical behaviour was determined by a temperature sweep with a heating rate of 3 °C min-1 and a temperature range of 25 °C-100 °C. Micrographs identified the presence of protoxilem with a mean diameter of 23.34 nm. The flow curve showed the characteristic behaviour of a pseudoplastic fluid. The storage module (G') and the loss modulus (G″) were dependent on the frequency applied, indicating that the material exhibits a weak gel characteristic. The viscoelastic characteristics were influenced by temperature. Therefore, cocoa shell is a new alternative in the production of nanocellulose.

Effect of ethanolic extract of Capsicum frutescens L. on adult female of Rhipicephalus microplus (Ixodidae).

This study evaluated the effects of ethanol extract of Capsicum frutescens L. (Solanaceae), colloquially known as malagueta pepper, on egg production and hatching rate of larvae of Rhipicephalus microplus. Plant samples were collected in Montes Claros, Minas Gerais, Brazil. Selected mature fruits were washed, dehydrated in a forced air oven at 40 ± 5 °C to constant weight. The material was incubated in absolute ethanol during 10 days, and the extract was filtered, dried, and stored in amber vials under refrigeration at 4 °C. Engorged adult female ticks were immersed in 10 ml solutions of ethanol extracts at 25, 50, 75, 100, or 150 mg ml(-1) dry matter, solubilized in dimethyl sulfoxide (DMSO) at 1% v/v. These concentrations were compared to distilled water or 1% v/v DMSO in distilled water as negative controls and a commercial product as positive control. The extract resulted in significantly lower oviposition at all tested concentrations when compared to the negative controls. On days 2 and 3 posttreatment, mortality rates of female ticks ≥55% were observed for concentrations ≥75 mg ml(-1). These concentrations resulted in a significantly lower hatchability mean, and the LC90 on hatching inhibition of R. microplus, estimated by probit analysis, was 91.8 mg ml(-1). High acaricidal in vitro effect was verified, and toxicological tests and analyses in vivo are important to determine appropriate dosages and frequency of the application necessary to promote this extract as safe and effective alternative for control of R. microplus.

Characterization of açaí (E. oleracea) fruits and its processing residues

The aim of this work was to study the source of the açaí residue for its possible commercial applications by characterizing the fruit (fresh and dry mass), and performing an anatomic study of the pericarp from which were identified the origin of the anthocyanins, and fatty acids, and fibers; also the vascular system, its fibers constituents and fibrils were characterized. It was concluded that anthocyanins were located on the epiderm and external parenchyma, and that solids retained on the sieve come from the sclerenchyma, and that the fatty acids come from the storage parenchyma. The vascular tissue was formed by the fibers around 20 mm length. The length distribution of the fibrils had a mean length of 580µm.

Isolation of a new L-amino acid oxidase from Crotalus durissus cascavella venom.

A novel l-amino acid oxidase (LAO) (Casca LAO) from Crotalus durissus cascavella venom was purified to a high degree of molecular homogeneity using a combination of molecular exclusion and ion-exchange chromatography system. The purified monomer of LAO presented a molecular mass of 68 kDa and pI estimated in 5.43, which were determined by two-dimensional electrophoresis. The 71st N-terminal amino acid sequence of the LAO from Crotalus durissus cascavella presented a high amino acid sequence similarities with other LAOs from Colloselasma rhosostoma, Crotalus adamanteus, Agkistrodon h. blomhoffi, Agkistrodon h. halys and Trimeresurus stejnegeri. LAO displayed a Michaelis-Menten behavior with a kilometer of 46.7 microM and an optimum pH for enzymatic activity of 6.5. Casca LAO induced a dose-dependent platelet aggregation, which was abolished by catalase and inhibited by indomethacin and aspirin. These results suggest that the production of H2O2 is involved in subsequent activation of inflammatory enzymes, such as thromboxane. Casca LAO also inhibited the bacterial growth of Gram-negative (Xanthomonas axonopodis pv passiflorae) and Gram-positive (S. mutans) strains. Electron microscopy assessments of both bacterial strains suggest that the hydrogen peroxide produced by LAO induce bacterial membrane rupture and consequently loss of cytoplasmatic content. This LAO exhibited a high antileishmanic activity against the promastigote of Leishmania amazonensis in vitro, its activity was dependent on the production of hydrogen peroxide, and the 50% inhibitory concentration was estimated in 2.39 microg/ml.