RESUMEN
Shaping of nanomaterials is a necessary step for their inclusion in electronic devices and batteries. For this purpose, the formulation of a moldable material including these nanomaterials is desirable. Organomineral gels are a very interesting option, since the components of the nanomaterial itself form a gel without the help of a binder. As a consequence, the properties of the nanomaterial are not diluted by the binder. In this article we studied organometallic gels based on a [ZnCy2 ] organometallic precursor and a primary alkyl amine which together forms spontaneously gels after few hours. We identified the main parameters controlling the gel properties monitored by rheology and NMR measurements The experiments demonstrate that the gelation time depends on the length of the alkyl chain of the amine and that the gelation mechanism derived firstly from the rigidification of the aliphatic chains of the amine, which takes precedence over the oligomerization of the inorganic backbone. This result highlights that the control of the rheological properties of organometallic gels remains mainly governed by the choice of the amine.
RESUMEN
Four undescribed secocycloartane monoglycosides (1-4) were isolated from an ethanolic extract of the dry flowers of Cordia lutea Lam. Their structural assignment is based on NMR and MS analysis. Their stereochemistry is confirmed by molecular modelling studies using DFT-NMR calculations done for compound 3. In vitro antibacterial activity of the four compounds was moderate on Helicobacter pylori (MIC = 15.6 µg/mL), and much weaker on Staphylococcus aureus, Pseudomonas aeruginosa or Escherichia coli (MIC >125 µg/mL). Toxicity evaluated against RAW 264.7 cells was weak (IC50 values ranging from 24 to 41 µM i.e. 15 to 24 µg/mL), but in the same range as anti-Helicobacter activity.
Asunto(s)
Cordia , Antibacterianos , Cordia/química , Glicósidos/farmacología , Pruebas de Sensibilidad Microbiana , Estructura Molecular , Extractos Vegetales/químicaRESUMEN
A novel N-hetero-RhI -metallacyclic silanone 2 has been synthesized. The silanone 2, showing an extremely large dimerization energy (ΔG=+86.2â kcal mol-1 ), displays considerable stability and persists in solution up to 60 °C. Above 120 °C, an intramolecular Csp3 -H insertion occurs slowly over a period of two weeks leading to the bicyclic silanol 5. The exceptional stability of 2, related to the unusual electronic and steric effects of RhI -substituent, should allow for a more profound study and understanding of these new species. Furthermore, the metallacyclic silanone 2 presents two reactive centers (Si=O and Rh), which can be involved depending upon the nature of reagents. Of particular interest, the reaction with H2 starts with the hydrogenation of RhI center leading to the corresponding RhIII -dihydride complex 7 and it undergoes a cis/trans-isomerization via a particular mechanism, demonstrating that addition-elimination processes can also happen for silanones just like for their carbon analogues!
RESUMEN
A new class of tritopic ferrocene-based ambiphilic compounds has been prepared by assembling diphosphino- and boryl-substituted cyclopentadienides at iron. The presence of five sterically demanding substituents on the ferrocene platform induces conformational constraints, as is apparent from XRD and NMR data, but does not prevent the chelating coordination to platinum. The Lewis acid moiety is pendant in both the free ligand and the platinum complex.
RESUMEN
A cyclic (amino)metal-substituted dicoordinated silylene derivative has been synthesized and fully characterized. Of particular interest is that the N-hetero-RhI -metallacyclic silylene exhibits a distorted tetrahedral geometry around the rhodium atom and a considerably shortened Si-Rh bond (2.138â Å) compared to classical Si-Rh single bonds (ca.â 2.30-2.35â Å). A theoretical investigation reveals that the geometrical deviation around the rhodium center from the classical square-planar to a tetrahedral geometry increases the π-donating and σ-accepting character of the rhodium atom, thereby efficiently stabilizing the silylene moiety.
RESUMEN
The ability of gold to act as proton acceptor and participate in hydrogen bonding remains an open question. Here, we report the synthesis and characterization of cationic gold(I) complexes featuring ditopic phosphine-ammonium (P,NH+) ligands. In addition to the presence of short AuâââH contacts in the solid state, the presence of AuâââH-N hydrogen bonds was inferred by NMR and IR spectroscopies. The bonding situation was extensively analyzed computationally. All features were consistent with the presence of three-center four-electron attractive interactions combining electrostatic and orbital components. The role of relativistic effects was examined, and the analysis is extended to other recently described gold(I) complexes.
RESUMEN
Intermolecular, stepwise functionalization by BH bonds of a (triphosphine)MoIV -nitrido complex generated by N2 splitting is reported. The imido-hydride and di-hydride-amido MoIV complexes have been isolated and characterized. Addition of PinBH to the [Mo(H)2 (N(BPin)2 )]+ complex at room temperature results in the liberation of borylamines from the metal center.
RESUMEN
Gold(iii) complexes are garnering increasing interest for opto-electronic, therapeutic and catalytic applications. But so far, very little is known about the factors controlling their reactivity and the very influence of the ancillary ligand. This article reports the first comprehensive study on this topic. The reactivity of a cationic (N,C) gold(iii) complex, namely 1A, towards ethylene has been thoroughly studied and compared with that of the related (P,C) complex 1C. A cationic gold(iii) complex 5A resulting from double insertion of ethylene was selectively obtained. Complex 5A was found to be remarkably stable. It was trapped with chloride and fully characterized. In marked contrast to that observed with 1C, no ß-H elimination or linear-to-branched rearrangement of the alkyl chain occurred with 1A. The energy profile for the reactions of 1A with ethylene has been comprehensively investigated computationally, and the influence of the ancillary ligand has been precisely delineated. Because nitrogen is a weaker donor than carbon (and phosphorus), the (N,C) ligand is very electronically dissymmetric, much more than the (P,C) ligand. This makes the two reactive sites at gold quite different, which noticeably influences the competition between migratory insertion and ß-H elimination, and actually changes the outcome of the olefin insertion at gold. This study provides valuable insight into the influence of ancillary ligands on gold(iii) reactivity, something critical to further develop Au(iii) and Au(i)/Au(iii) catalysis.
RESUMEN
A silanone substituted by bulky amino and phosphonium bora-ylide substituents has been isolated in crystalline form. Thanks to the exceptionally strong electron-donating phosphonium bora-ylide substituent, the lifetime at room temperature of the silanone is dramatically extended (t1/2 =4â days) compared to the related (amino)(phosphonium ylide)silanone VI (t1/2 =5â h), allowing easier manipulation and its use as precursor of new valuable silicon compounds. The interaction of silanone with a weak Lewis acid such as MgBr2 increases further its stability (no degradation after 3â weeks at room temperature).
RESUMEN
A series of isoniazid derivatives bearing a phenolic or heteroaromatic coupled frame were obtained by mechanochemical means. Their pH stability and their structural (conformer/isomer) analysis were checked. The activity of prepared derivatives against Mycobacterium tuberculosis cell growth was evaluated. Some compounds such as phenolic hydrazine 1a and almost all heteroaromatic ones, especially 2, 5 and 7, are more active than isoniazid, and their activity against some M. tuberculosis MDR clinical isolates was determined. Compounds 1a and 7 present a selectivity index >1400 evaluated on MRC5 human fibroblast cells. The mechanism of action of selected hydrazones was demonstrated to block mycolic acid synthesis due to InhA inhibition inside the mycobacterial cell.
Asunto(s)
Antituberculosos/farmacología , Isoniazida/síntesis química , Isoniazida/farmacología , Antituberculosos/química , Muerte Celular/efectos de los fármacos , Línea Celular , Cromatografía en Capa Delgada , Humanos , Hidrazonas/síntesis química , Hidrazonas/química , Hidrazonas/farmacología , Concentración de Iones de Hidrógeno , Hidrólisis , Isomerismo , Isoniazida/química , Espectroscopía de Resonancia Magnética , Pruebas de Sensibilidad Microbiana , Modelos Moleculares , Conformación Molecular , Mycobacterium tuberculosis/efectos de los fármacos , Mycobacterium tuberculosis/crecimiento & desarrollo , Teoría Cuántica , Espectrofotometría Ultravioleta , TermodinámicaRESUMEN
Electropositive boron-based substituent (phosphonium bora-ylide) with an exceptionally strong π- and σ-electron donating character dramatically increases the stability of a new type of N-heterocyclic silylene 2 featuring amino- and bora-ylide-substituents. Moreover, the related silylium ion 4 and transition-metal-silylene complexes, with trigonal-planar geometries around the silicon center, are also well stabilized. Therefore, the N,B-heterocyclic silylene 2 can be used as a strongly electron-donating innocent ligand in coordination chemistry similarly to N-heterocyclic carbenes.
RESUMEN
Mass spectrometry (MS) is widely used for isotopic studies of metabolism in which detailed information about biochemical processes is obtained from the analysis of isotope incorporation into metabolites. The biological value of such experiments is dependent on the accuracy of the isotopic measurements. Using MS, isotopologue distributions are measured from the quantitative analysis of isotopic clusters. These measurements are prone to various biases, which can occur during the experimental workflow and/or MS analysis. The lack of relevant standards limits investigations of the quality of the measured isotopologue distributions. To meet that need, we developed a complete theoretical and experimental framework for the biological production of metabolites with fully controlled and predictable labeling patterns. This strategy is valid for different isotopes and different types of metabolisms and organisms, and was applied to two model microorganisms, Pichia augusta and Escherichia coli, cultivated on (13)C-labeled methanol and acetate as sole carbon source, respectively. The isotopic composition of the substrates was designed to obtain samples in which the isotopologue distribution of all the metabolites should give the binomial coefficients found in Pascal's triangle. The strategy was validated on a liquid chromatography-tandem mass spectrometry (LC-MS/MS) platform by quantifying the complete isotopologue distributions of different intracellular metabolites, which were in close agreement with predictions. This strategy can be used to evaluate entire experimental workflows (from sampling to data processing) or different analytical platforms in the context of isotope labeling experiments.
Asunto(s)
Marcaje Isotópico/métodos , Espectrometría de Masas , Metabolismo/fisiología , Algoritmos , Escherichia coli/metabolismo , Pichia/metabolismo , Control de Calidad , Estándares de ReferenciaRESUMEN
The analysis of metabolic intermediates is a rich source of isotopic information for (13)C metabolic flux analysis ((13)C-MFA) and extends the range of its applications. The sampling of labeled metabolic intermediates is particularly important to obtain reliable isotopic information. The assessment of the different sampling procedures commonly used to generate such data, therefore, is crucial. In this work, we thoroughly evaluated several sampling procedures for stationary and non-stationary (13)C-MFA using Escherichia coli. We first analyzed the efficiency of these procedures for quenching metabolism and found that procedures based on cold or boiling solvents are reliable, in contrast to fast filtration, which is not. We also showed that separating the cells from the broth is not necessary in isotopic stationary state conditions. On the other hand, we demonstrated that the presence of metabolic intermediates outside the cells strongly affects the transient isotopic data monitored during non-stationary (13)C-labeling experiments. Meaningful isotopic data can be obtained by recovering intracellular labeled metabolites from pellets of cells centrifuged in cold solvent. We showed that if the intracellular pools are not separated from the extracellular ones, accurate flux maps can be established provided that the contribution of exogenous compounds is taken into account in the metabolic flux model.
Asunto(s)
Escherichia coli K12/metabolismo , Marcaje Isotópico/métodos , Metabolómica/métodos , Modelos Biológicos , Isótopos de Carbono/químicaRESUMEN
BACKGROUND: The detailed characterization of arabinoxylan-active enzymes, such as double-substituted xylan arabinofuranosidase activity, is still a challenging topic. Ad hoc chromogenic substrates are useful tools and can reveal subtle differences in enzymatic behavior. In this study, enzyme selectivity on natural substrates has been compared with enzyme selectivity towards aryl-glycosides. This has proven to be a suitable approach to understand how artificial substrates can be used to characterize arabinoxylan-active α-l-arabinofuranosidases (Abfs). METHODS: Real-time NMR using a range of artificial chromogenic, synthetic pseudo-natural and natural substrates was employed to determine the hydrolytic abilities and specificity of different Abfs. RESULTS: The way in which synthetic di-arabinofuranosylated substrates are hydrolyzed by Abfs mirrors the behavior of enzymes on natural arabinoxylo-oligosaccharide (AXOS). Family GH43 Abfs that are strictly specific for mono-substituted d-xylosyl moieties (AXH-m) do not hydrolyze synthetic di-arabinofuranosylated substrates, while those specific for di-substituted moieties (AXH-d) remove a single l-arabinofuranosyl (l-Araf) group. GH51 Abfs, which are supposedly AXH-m enzymes, can release l-Araf from disubstituted d-xylosyl moieties, when these are non-reducing terminal groups. CONCLUSIONS AND GENERAL SIGNIFICANCE: The present study reveals that although the activity of Abfs on artificial substrates can be quite different from that displayed on natural substrates, enzyme specificity is well conserved. This implies that carefully chosen artificial substrates bearing di-arabinofuranosyl d-xylosyl moieties are convenient tools to probe selectivity in new Abfs. Moreover, this study has further clarified the relative promiscuity of GH51 Abfs, which can apparently hydrolyze terminal disubstitutions in AXOS, albeit less efficiently than mono-substituted motifs.
Asunto(s)
Bacillus/enzimología , Proteínas Bacterianas/química , Glicósido Hidrolasas/química , Oligosacáridos/química , Bacillus/genética , Proteínas Bacterianas/genética , Glicósido Hidrolasas/genética , Resonancia Magnética Nuclear Biomolecular , Oligosacáridos/genética , Especificidad por Sustrato/fisiologíaRESUMEN
The purpose of the study was to investigate the degradation pathway of 5-fluorouracil (FU) in the situation of commercial formulations for clinical use, namely FU dissolved in sodium hydroxide (NaOH) solutions or Tris buffer at pH 8.5-9. Combination of data from (19)F, (1)H and (13)C NMR and in some cases MS led to the identification of 8 and 13 FU degradation products in NaOH and Tris solutions respectively. In FU NaOH solutions, the first stage of FU degradation is a stereoselective hydration of the C5-C6 double bond leading to 5,6-dihydro-5-fluoro-6-hydroxyuracil, the cis stereoisomer being predominant relative to the trans. The second stage involves either a defluorination step with formation of fluoride ion and 5-hydroxyuracil or the cleavage of the N3-C4 bond giving the two diastereoisomeric 2-fluoro-3-hydroxy-3-ureidopropanoic acids. The subsequent N1-C6 bond breakdown of these compounds releases urea and 2-fluoro-3-oxopropanoic acid (FOPA) which in turn losses easily carbon dioxide leading to the formation of fluoroacetaldehyde (Facet). The degradation pathway in FU-Tris solutions is identical, except that Tris reacts with the aldehydes FOPA and Facet to form oxazolidine adducts stable at pH 8.5 but in equilibrium with the aldehyde forms at physiological pH, whereas the high reactivity of free aldehydes leads to numerous unidentified degradation compounds all in very low amounts. The FOPA diastereoisomeric adducts react with Facet to form four diastereoisomeric fused bicyclic five-membered ring compounds. Facet and FOPA are highly cardiotoxic. In Tris formulations, they are trapped as stable oxazolidine adducts which release the free aldehydes at physiological pH thus explaining the higher cardiotoxicity of FU in Tris solutions compared to that of FU in NaOH solutions.
Asunto(s)
Fluorouracilo/química , Soluciones/química , Química Farmacéutica/métodos , Concentración de Iones de Hidrógeno , Hidrólisis , Espectroscopía de Resonancia Magnética/métodos , Hidróxido de Sodio/química , Uracilo/análogos & derivados , Uracilo/químicaRESUMEN
Advances in metabolic engineering are enabling the creation of a large number of cell factories. However, high-throughput platforms do not yet exist for rapidly analyzing the metabolic network of the engineered cells. To fill the gap, we developed an integrated solution for fluxome profiling of large sets of biological systems and conditions. This platform combines a robotic system for (13)C-labelling experiments and sampling of labelled material with NMR-based isotopic fingerprinting and automated data interpretation. As a proof-of-concept, this workflow was applied to discriminate between Escherichia coli mutants with gradual expression of the glucose-6-phosphate dehydrogenase. Metabolic variants were clearly discriminated while pathways that support metabolic flexibility towards modulation of a single enzyme were elucidating. By directly connecting the data flow between cell cultivation and flux quantification, considerable advances in throughput, robustness, release of resources and screening capacity were achieved. This will undoubtedly facilitate the development of efficient cell factories.
Asunto(s)
Técnicas de Cultivo Celular por Lotes/instrumentación , Proteínas de Escherichia coli/fisiología , Escherichia coli/fisiología , Perfilación de la Expresión Génica/instrumentación , Análisis de Flujos Metabólicos/instrumentación , Metaboloma/fisiología , Robótica/instrumentación , Técnicas de Cultivo Celular por Lotes/métodos , Diseño de Equipo , Análisis de Falla de Equipo , Mutación/genética , Mapeo Peptídico/instrumentación , Mapeo Peptídico/métodos , Integración de SistemasRESUMEN
The measurement of site-specific (13)C enrichments in complex mixtures of (13)C-labeled metabolites is a powerful tool for metabolic flux analysis. One of the main methods to measure such enrichments is homonuclear (1)H 2D NMR. However, the major limitation of this technique is the acquisition time, which can amount to a few hours. This drawback was recently overcome by the design of fast COSY experiments for measuring specific (13)C-enrichments, based on single-scan 2D NMR. However, these experiments are still limited by overlaps because of(1)H-(13)C splittings, thus limiting the metabolic information accessible for complex biological mixtures. To circumvent this limitation, we propose to tilt the (1)H-(13)C coupling into a third dimension via fast-hybrid 3D NMR methods combining the speed of ultrafast 2D NMR with the high resolution of conventional methods. Two strategies are described that allow the acquisition of a complete 3D J-resolved-COSY spectrum in 12 min (for concentrations as low as 10 mM). The analytical potentialities of both methods are evaluated on a series of (13)C-enriched glucose samples and on a biomass hydrolyzate obtained from Escherichia coli cells. Once optimized, the two complementary experiments lead to a trueness and a precision of a few percent and an excellent linearity. The advantages and drawbacks of these approaches are discussed and their potentialities are highlighted.
Asunto(s)
Espectroscopía de Resonancia Magnética/métodos , Análisis de Flujos Metabólicos/métodos , Isótopos de Carbono/química , Escherichia coli/citología , Factores de TiempoRESUMEN
Increased sensitivity: A new sample-preparation procedure is described to limit molecular diffusion effects in NMR experiments. It is based on analyte encapsulation in liposomes and is particularly useful for ultrafast multidimensional NMR experiments.
RESUMEN
Selecting wall-nibblers: Three 4-nitrocatechol derivatives were designed to facilitate high-throughput screening of arabinofuranose hydrolases, enzymes that typically digest plant cell walls. The designed compounds can be used in solid and liquid media, and, importantly, one allows the specific detection of AXH-d, a specialized enzyme that only releases L-arabinose from disubstituted D-xylosyl moieties.
Asunto(s)
Arabinosa/análogos & derivados , Catecoles/metabolismo , Pruebas de Enzimas/métodos , Escherichia coli/enzimología , Nitrocompuestos/metabolismo , Arabinosa/química , Arabinosa/metabolismo , Catecoles/química , Colorimetría/métodos , Escherichia coli/metabolismo , Hidrólisis , Nitrocompuestos/químicaRESUMEN
Adaptive metabolic behavior of photoautotrophic microorganisms toward genetic and environmental perturbations can be interpreted in a quantitative depiction of carbon flow through a biochemical reaction network using isotopic non-stationary (13) C-metabolic flux analysis (INST (13) C-MFA). To evaluate (13) C-metabolic flux maps for Chlamydomonas reinhardtii, an original experimental framework was designed allowing rapid, reliable collection of high-quality isotopomer data against time. It involved (i) a short-time (13) C labeling injection device based on mixing control in a torus-shaped photobioreactor with plug-flow hydrodynamics allowing a sudden step-change in the (13) C proportion in the substrate feed and (ii) a rapid sampling procedure using an automatic fast filtration method coupled to a manual rapid liquid nitrogen quenching step. (13) C-substrate labeling enrichment was controlled through the total dissolved inorganic carbon concentration in the pulsed solution. First results were obtained from steady-state continuous culture measurements allowing the characterization of the kinetics of label incorporation into light-limited growing cells cultivated in a photobioreactor operating at the maximal biomass productivity for an incident photon flux density of 200 µmol m(-2) s(-1). (13)C label incorporation was measured for 21 intracellular metabolites using IC-MS/MS in 58 samples collected across a labeling experiment duration of 7 min. The fastest labeling rate was observed for 2/3-phosphoglycerate with an apparent isotopic stationary state reached after 300 s. The labeling rate was consistent with the optimized mixing time of about 4.9 s inside the reactor and the shortest reliable sampling period assessed at 5 s.