Copolymers of Gelatin-graft-poly(3-hexylthiophene) for Transient Electronics.

As transient electronics continue to advance, the demand for new materials has given rise to the exploration of conducting polymer (CP)-based electronic materials. The big challenge lies in balancing conductivity while introducing controlled degradable properties into CP-based transient materials. In response to this, we present in this work a concept of using conducting polymers attached to an enzymatically biodegradable biopolymer to create transient polymer electronics materials. Specifically, poly(3-hexyl thiophene) (P3HT) is covalently grafted onto biopolymer gelatin, affording graft copolymer gelatin-graft-poly(3-hexyl thiophene) (termed Gel-g-P3HT). The thin films of Gel-g-P3HT that were produced by optimized processing solvent (THF/H2O cosolvent) showed enhanced π-π stacking domains of P3HT, resulting in semiconducting thin films with good electroactivity. Due to the presence of amide bonds in the gelatin backbone, Gel-g-P3HT underwent degradation over a period of 5 days, resulting in the formation of amphiphilic micellar nanoparticles that are biocompatible and nontoxic. The potential of these conductive and degradable graft copolymers was demonstrated in a pressure sensor. This research paves the way for developing biocompatible and enzymatically degradable polymer materials based on P3HT, enabling the next generation of transient polymer electronics for diverse applications, such as skin, implantable, and environmental electronics.

Unraveling the Effects of Cationic Peptides on Vesicle Structures: Insights into Peptide-Membrane Interactions.

Antimicrobial resistance is a pressing global health issue, with millions of lives at risk by 2050, necessitating the development of alternatives with broad-spectrum activity against pathogenic microbes. Antimicrobial peptides provide a promising solution by combating microbes, modulating immunity, and reducing resistance development through membrane and intracellular targeting. PuroA, a synthetic peptide derived from the tryptophan-rich domain of puroindoline A, exhibits potent antimicrobial activity against various pathogens, while the rationally designed P1 peptide demonstrates enhanced antimicrobial activity with its specific composition. This paper investigates the concentration-dependent effects of these cationic peptides on distinct types of vesicles representing strong-negative bacterial cell membranes (S-vesicles), weak-negative bacterial cell membranes (W-vesicles), and mammalian cell membranes (M-vesicles). To investigate the interactions between the peptides and vesicles, small-angle neutron scattering experiments were conducted. The cationic peptides, PuroA and P1, interact with S-vesicles through electrostatic interactions, leading to distinct effects. PuroA accumulates on the vesicle surface, increasing Rcore and Rtotal, aligning with the carpet model. P1 disrupts the vesicle structure at higher concentrations, consistent with the detergent model. Neither peptide significantly affects W-vesicles, emphasizing the role of charge. In uncharged M-vesicles, both peptides decrease Rcore and Rtotal and increase tshell, indicating peptide insertion and altered bilayer properties. These findings provide valuable insights into peptide-membrane interactions and their impact on vesicle structures. Furthermore, the implications of these findings extend to the potential development of innovative antimicrobial agents and drug delivery systems that specifically target bacterial and mammalian membranes. This research contributes to the advancement of understanding peptide-membrane interactions and lays the foundation for the design of approaches for targeting membranes in various biomedical applications.

Competitive effects of salt and surfactant on the structure of nanoparticles in a binary system of nanoparticle and protein.

Small-angle neutron scattering (SANS) and dynamic light scattering (DLS) experiments have been carried out to study the competitive effects of NaCl and sodium dodecyl sulfate (SDS) surfactant on the evolution of the structure and interactions in a silica nanoparticle-Bovine serum albumin (BSA) protein system. The unique advantage of contrast-matching SANS has been utilized to particularly probe the structure of nanoparticles in the multi-component system. Silica nanoparticles and BSA protein both being anionic remain largely individual in the solution without significant adsorption. The non-adsorbing nature of protein is known to cause depletion attraction between nanoparticles at higher protein concentrations. The nanoparticles undergo immediate aggregation in the nanoparticle-BSA system on the addition of a small amount of salt [referred as the critical salt concentration (CSC)], much less than that required to induce aggregation in a pure nanoparticle dispersion. The salt ions screen the electrostatic repulsion between the nanoparticles, whereby the BSA-induced depletion attraction dominates the system and contributes to the nanoparticle aggregation of a mass fractal kind of morphology. Further, the addition of SDS in this system interestingly suppresses nanoparticle aggregation for salt concentrations lower than the CSC. The presence of SDS gives rise to additional electrostatic repulsion in the system by binding with the BSA protein via electrostatic and hydrophobic interactions. For salt concentrations higher than the CSC, the formation of clusters of nanoparticles is inevitable even in the presence of protein-surfactant complexes, but the mass fractal kind of branched aggregates transform to surface fractals. This has been attributed to the BSA-SDS complex induced depletion attraction along with salt-driven screening of electrostatic repulsion. Thus, the interplay of depletion and electrostatic and hydrophobic interactions has been utilized to tune the structures formed in a multicomponent silica nanoparticle-BSA-SDS/NaCl system.

Crowder-directed interactions and conformational dynamics in multistimuli-responsive intrinsically disordered protein.

The consequences of crowding on the dynamic conformational ensembles of intrinsically disordered proteins (IDPs) remain unresolved because of their ultrafast motion. Here, we report crowder-induced interactions and conformational dynamics of a prototypical multistimuli-responsive IDP, Rec1-resilin. The effects of a range of crowders of varying sizes, forms, topologies, and concentrations were examined using spectroscopic, spectrofluorimetric, and contrast-matching small- and ultrasmall-angle neutron scattering investigation. To achieve sufficient neutron contrast against the crowders, deuterium-labeled Rec1-resilin was biosynthesized successfully. Moreover, the ab initio "shape reconstruction" approach was used to obtain three-dimensional models of the conformational assemblies. The IDP revealed crowder-specific systematic extension and compaction with the level of macromolecular crowding. Last, a robust extension-contraction model has been postulated to capture the fundamental phenomena governing the observed behavior of IDPs. The study provides insights and fresh perspectives for understanding the interactions and structural dynamics of IDPs in crowded states.

Structure evolution of nanodiamond aggregates: a SANS and USANS study.

Ultra-small-angle neutron scattering (USANS) and small-angle neutron scattering (SANS) measurements, covering length scales from micrometres to nanometres, were made to investigate the structure of nanodiamonds (NDs) and their suspensions. These nanodiamonds were produced by two different techniques, namely by the detonation method and by the laser ablation of a carbon-hydro-carbon mixture. The (U)SANS results indicated the presence of structures four orders of magnitude larger than the dimensions of a single ND particle, consisting of aggregations of ND particles. This aggregation of the ND particles was studied by employing the contrast variation technique. Two different solvents, namely H2O and dimethyl sulfoxide (and their deuterated counterparts), were used to understand the role of hydrogen in the shape and size of the aggregates. The analysis of experimental data from SANS measurements also reveals the ND particles to have an ellipsoidal structure. Using a defined shape model and the SANS contrast variation technique, it was possible to characterize the non-diamond outer shell of the particles and determine the outer layer thickness. This clarification of the structure of the NDs will allow better preparation of suspensions/samples for various applications. Understanding the structure of NDs at multiple length scales also provides crucial knowledge of particle-particle interaction and its effect on the aggregation structures.

Tuning of silica nanoparticle-lysozyme protein complexes in the presence of the SDS surfactant.

The structures of the complexes of anionic silica nanoparticle (size ∼ 16 nm)-lysozyme (cationic) protein, tuned by the addition of the anionic surfactant sodium dodecyl sulfate (SDS), have been investigated by dynamic light scattering (DLS) and small-angle neutron scattering (SANS). The unique advantage of contrast variation SANS has been used to probe the role of individual components in binary and ternary systems. The cationic lysozyme protein (at pH ∼ 7) adsorbs on the anionic silica nanoparticles and forms mass fractal aggregates due to the strong attractive interaction, whereas similarly charged SDS does not interact physically with silica nanoparticles. The presence of SDS, however, remarkably affects the nanoparticle-protein interactions via binding with the oppositely charged segments of lysozyme. In general, the SDS-lysozyme complexes possess a variety of structures (e.g., insoluble complexes of Ly(DS)8, crystalline structure, or micelle-like structure) depending on the surfactant-to-protein molar ratio (S/P). In the ternary system (HS40-lysozyme-SDS), lysozyme preferentially binds with SDS, instead of directly to nanoparticles. At low S/Ps (0 ≤ S/P ≤ 10), the SDS concentration is not enough to fully neutralize the charge of lysozyme, leading to the formation of cationic SDS-lysozyme complex-mediated nanoparticle aggregation. The morphology of the nanoparticle-(lysozyme-SDS) complexes is also found to be mass fractal kind where the fractal dimension increases with increasing SDS concentration. At S/P > 10, there is sufficient SDS to fully neutralize the lysozyme in the absence of competing charges from the particle but it is at S/P = 50 before all lysozyme desorbs from the particle and binds completely to the overwhelming amount of SDS, creating an oppositely charged lysozyme-SDS complex, which is repelled from the particle.

3D Printable Soy/Silk Hybrid Hydrogels for Tissue Engineering Applications.

The development of protein-based 3D printable hydrogel systems with tunable structure and properties is a critical challenge in contemporary biomedicine. Particularly, 3D printing of modular hydrogels comprising different types of protein tertiary structure, such as globular and fibrous, has not yet been achieved. Here we report the extrusion-based 3D printing of hybrid hydrogels photochemically co-cross-linked between globular soy protein isolate (SPI) and fibrous silk fibroin (SF) for the first time. The hierarchical structure and organization of pristine SPI and SF, and 1:3 (SPI/SF) hybrid inks under various shear stress were investigated using in situ rheology combined with small-/ultra-small-angle neutron scattering (Rheo-SANS/USANS). The hybrid ink exhibited an isotropic mass fractal structure that was stable between tested shear rates of 0.1 and 100 s-1 (near printing shear). The kinetics of sol-gel transition during the photo-cross-linking reaction and the micromechanical properties of fabricated hydrogels were investigated using photorheology and atomic force microscopy, where the hybrid hydrogels exhibited tunable storage and Young's moduli in the range of 13-29 and 214-811 kPa, respectively. The cross-link density and printing accuracy of hybrid hydrogels and inks were observed to increase with the increase in SF content. The 3D printed hybrid hydrogels exhibited a micropore size larger than that of solution casted hydrogels; where the 3D printed 1:3 (SPI/SF) hybrid hydrogel showed a pore size about 7.6 times higher than that of the casted hydrogel. Moreover, the fabricated hybrid hydrogels exhibit good mouse fibroblast cell attachment, viability, and proliferation, demonstrating their potential for tissue engineering applications.

Cellular interactions with polystyrene nanoplastics-The role of particle size and protein corona.

Plastic waste is ubiquitously spread across the world and its smaller analogs-microplastics and nanoplastics-raise particular health concerns. While biological impacts of microplastics and nanoplastics have been actively studied, the chemical and biological bases for the adverse effects are sought after. This work explores contributory factors by combining results from in vitro and model mammalian membrane experimentation to assess the outcome of cell/nanoplastic interactions in molecular detail, inspecting the individual contribution of nanoplastics and different types of protein coronae. The in vitro study showed mild cytotoxicity and cellular uptake of polystyrene (PS) nanoplastics, with no clear trend based on nanoplastic size (20 and 200 nm) or surface charge. In contrast, a nanoplastic size-dependency on bilayer disruption was observed in the model system. This suggests that membrane disruption resulting from direct interaction with PS nanoplastics has little correlation with cytotoxicity. Furthermore, the level of bilayer disruption was found to be limited to the hydrophilic headgroup, indicating that transmembrane diffusion was an unlikely pathway for cellular uptake-endocytosis is the viable mechanism. In rare cases, small PS nanoplastics (20 nm) were found in the vicinity of chromosomes without a nuclear membrane surrounding them; however, this was not observed for larger PS nanoplastics (200 nm). We hypothesize that the nanoplastics can interact with chromosomes prior to nuclear membrane formation. Overall, precoating PS particles with protein coronae reduced the cytotoxicity, irrespective of the corona type. When comparing the two types, the extent of reduction was more apparent with soft than hard corona.

Native disulphide-linked dimers facilitate amyloid fibril formation by bovine milk αS2-casein.

Bovine milk αS2-casein, an intrinsically disordered protein, readily forms amyloid fibrils in vitro and is implicated in the formation of amyloid fibril deposits in mammary tissue. Its two cysteine residues participate in the formation of either intra- or intermolecular disulphide bonds, generating monomer and dimer species. X-ray solution scattering measurements indicated that both forms of the protein adopt large, spherical oligomers at 20 °C. Upon incubation at 37 °C, the disulphide-linked dimer showed a significantly greater propensity to form amyloid fibrils than its monomeric counterpart. Thioflavin T fluorescence, circular dichroism and infrared spectra were consistent with one or both of the dimer isomers (in a parallel or antiparallel arrangement) being predisposed toward an ordered, amyloid-like structure. Limited proteolysis experiments indicated that the region from Ala81 to Lys113 is incorporated into the fibril core, implying that this region, which is predicted by several algorithms to be amyloidogenic, initiates fibril formation of αS2-casein. The partial conservation of the cysteine motif and the frequent occurrence of disulphide-linked dimers in mammalian milks despite the associated risk of mammary amyloidosis, suggest that the dimeric conformation of αS2-casein is a functional, yet amyloidogenic, structure.

Uncovering the superior corrosion resistance of iron made via ancient Indian iron-making practice.

Ancient Indian iron artefacts have always fascinated researchers due to their excellent corrosion resistance, but the scientific explanation of this feature remains to be elucidated. We have investigated corrosion resistance of iron manufactured according to traditional metallurgical processes by the Indian tribes called 'Agaria'. Iron samples were recovered from central India (Aamadandh, Korba district, Chhattisgarh). Iron artefacts are investigated using a range of correlative microscopic, spectroscopic, diffraction and tomographic techniques to postulate the hidden mechanisms of superlative corrosion resistance. The importance of manufacturing steps, ingredients involved in Agaria's iron making process, and post-metal treatment using metal-working operation called hot hammering (forging) is highlighted. This study also hypothesizes the probable protective mechanisms of corrosion resistance of iron. Findings are expected to have a broad impact across multiple disciplines such as archaeology, metallurgy and materials science.

Reviewing nanoplastic toxicology: It's an interface problem.

Multiple international agencies have recently raised environmental and health concerns regarding plastics in nanoforms (nanoplastics), but there is insufficient knowledge of their properties to allow for an accurate risk assessment to be conducted and any risks managed. For this reason, research into the toxicity of nanoplastics has focused strongly on documenting their impacts on biological organisms. One scope of this review is to summarise the recent findings on the adverse effects on biological organisms and strategies which can be adopted to advance our understanding of nanoplastic properties and their toxicity. Specifically, a mechanistic approach has already been employed in nanotoxicology, which focuses on the cause-and-effect relationships to establish a tool that predicts the biological impacts based on nanoparticle characteristics. Identifying the chemical and biological bases behind the observed biological effects (such as in vitro cellular response) is a major challenge, due to the intricate nature of nanoparticle-biological molecule complexes and an unawareness of their interaction with other biological targets, particularly at interfacial level. An exemplary case includes protein corona formation and ecological molecule corona (eco-corona) for nanoplastics. Therefore, the second scope of this review is to discuss recent findings and importance of (for both non-plastic and plastic nanoparticles) coronae formation and structure. Finally, we discuss the opportunities provided by model system approaches (model protein corona and lipid bilayer) to deepen the understanding of the above-mentioned perspectives, and corroborate the findings from in vitro experiments.

Structure of soft and hard protein corona around polystyrene nanoplastics-Particle size and protein types.

A major challenge in understanding nanoplastic toxicity (or nanoparticles in general) lies in establishing the causal relationships between its physical properties and biological impact. This difficulty can be attributed to surface alterations that follow the formation of a biological complex around the nanoplastic, as exemplified by protein coronae. The protein corona is known to be responsible for the biological response elicited, although its own structure and attributes remain unknown. We approach this knowledge gap by independently studying the structure of soft and hard coronae using neutron scattering techniques. We investigated the formation and the structure of corona proteins (human serum albumin and lysozyme) and the resulting protein corona complexes with polystyrene nanoplastics of different sizes (20 and 200 nm) and charges. Soft corona complexes (regardless of protein type) adopted a structure where the nanoplastics were surrounded by a loose protein layer (∼2-3 protein molecules thick). Hard corona complexes formed fractal-like aggregates, and the morphology of which is known to be harmful to cellular membranes. In most cases, hard-corona coated nanoplastics also formed fractal-like aggregates in solution. Nanoplastic size affected the structures of both the protein corona and the intrinsic protein: more significant conformational change was observed in the hard corona proteins around smaller nanoparticles compared to larger ones, as the self-association forces holding the nanoplastic/protein complex together were stronger. This also implies that protein-dependent biochemical processes are more likely to be disrupted by smaller polystyrene nanoplastics, rather than larger ones.

The Aggregation of αB-Crystallin under Crowding Conditions Is Prevented by αA-Crystallin: Implications for α-Crystallin Stability and Lens Transparency.

One of the most crowded biological environments is the eye lens which contains a high concentration of crystallin proteins. The molecular chaperones αB-crystallin (αBc) with its lens partner αA-crystallin (αAc) prevent deleterious crystallin aggregation and cataract formation. However, some forms of cataract are associated with structural alteration and dysfunction of αBc. While many studies have investigated the structure and function of αBc under dilute in vitro conditions, the effect of crowding on these aspects is not well understood despite its in vivo relevance. The structure and chaperone ability of αBc under conditions that mimic the crowded lens environment were investigated using the polysaccharide Ficoll 400 and bovine γ-crystallin as crowding agents and a variety of biophysical methods, principally contrast variation small-angle neutron scattering. Under crowding conditions, αBc unfolds, increases its size/oligomeric state, decreases its thermal stability and chaperone ability, and forms kinetically distinct amorphous and fibrillar aggregates. However, the presence of αAc stabilizes αBc against aggregation. These observations provide a rationale, at the molecular level, for the aggregation of αBc in the crowded lens, a process that exhibits structural and functional similarities to the aggregation of cataract-associated αBc mutants R120G and D109A under dilute conditions. Strategies that maintain or restore αBc stability, as αAc does, may provide therapeutic avenues for the treatment of cataract.

Tuning the Hierarchical Structure and Resilience of Resilin-like Polypeptide Hydrogels Using Graphene Oxide.

Resilin-like polypeptides (RLPs) are an important class of intrinsically disordered multistimuli-responsive bioelastomers. The nanostructure of RLPs in solution has been extensively studied in the past few years, from dilute to molecular crowding conditions, and with the addition of rigid biopolymers. Modification of the hierarchical network structure of RLP hydrogels using graphene oxide (GO) as an additive is a burgeoning prospect for their application in the bioelectronic and biomedical fields. In this work, we systemically study the influence of incorporating GO into RLP (Rec1) hydrogels for tuning their physicochemical properties and understanding the gel-cell interactions. The nature of GO interaction with the Rec1 hydrogel is deduced from the change in structure and properties. Contrast-matching small-angle and ultra-small-angle neutron-scattering techniques were used to investigate the network structure of the Rec1 hydrogel and how this structure is modified in the presence of GO. Incorporation of GO in the Rec1 hydrogel matrix results in an increase in the micromechanical resilience, equilibrium water swelling ratio, micropore size, cross-linked domain size; with a decrease in the cross-link density, mass fractal cluster size, local compressive elastic modulus, and cell inert characteristics. These property combinations achieved with the addition of GO further open up the available structure-property design window for RLP applications.

Solution structure of linear battacin lipopeptides - the effect of lengthening fatty acid chain.

In recent years, lipopeptides have received attention for their enhanced antimicrobial activity, especially against multi-drug resistant (MDR) pathogens. We have previously reported that the bacterial soil extracted, novel cyclic lipopeptide, battacin, and its synthetic analogues have enhanced antimicrobial activity against various Gram negative, Gram positive and fungal pathogens. In particular, the modification of the hydrophobic fatty acid chain and molecular structure has improved its activity. We have used small angle X-ray scattering (SAXS) and circular dichroism (CD) to characterise the low resolution structure of battacin lipopeptides containing covalently bonded fatty acid chains and the one without it. In the absence of fatty acids or with short fatty acid chain, the peptides adopted an extended random coil structure that is best described barbell-like shape, while fatty acids that are sufficiently long induced an aggregation into a ∼4.0 nm diameter core shell sphere. While the kinked structure found within this barbell shape may have a role in antimicrobial activities, the self-assembly of the battacin analogue with the longest fatty acid chain may have a correlation to the declined antibacterial activities.

Soft and Hard Interactions between Polystyrene Nanoplastics and Human Serum Albumin Protein Corona.

Upon contact with biological fluids, the surface of nanoparticles is surrounded by many types of proteins, forming a so-called "protein corona". The physicochemical properties of the nanoparticle/corona complex depend predominantly on the nature of the protein corona. An understanding of the structure of the corona and the resulting complex provides insight into the structure-activity relationship. Here, we structurally evaluate the soft and hard components of the protein corona, formed from polystyrene (PS) nanoplastics and human serum albumin (HSA). Using circular dichroism spectroscopy to elucidate the structure of HSA within the complex, we establish the effect of nanoparticle size and pH on the nature of the protein corona formed- whether hard or soft. Despite the weak interaction between PS and the HSA corona, small angle neutron scattering revealed the formation of a complex structure that enhanced the intermolecular interactions between HSA proteins, PS particles, and the HS/PSA complexes. Fractal formation occurred under conditions where the interaction between PS and HSA was strong, and increasing HSA concentrations suppressed the degree of aggregation. The size of the nanoparticles directly influenced the nature of the protein corona, with larger particles favoring the formation of a soft corona, due to the decreased PS-HSA attraction.

Evolution of the Interfacial Structure of a Catalyst Ink with the Quality of the Dispersing Solvent: A Contrast Variation Small-Angle and Ultrasmall-Angle Neutron Scattering Investigation.

The electrocatalyst layer (ECL) of the proton-exchange membrane fuel cell (PEMFC) is commonly fabricated from colloidal catalyst ink containing carbon-supported catalyst nanoparticles (NPs), ionomer stabilizer, and dispersion medium (DM). The structure, stability, and aggregate size distribution of fuel cell catalyst ink are critically dependent on the quality of DM. However, understanding of the influence of the quality of DM on the hierarchical structure of the ECL is lacking. This work presents a systematic investigation of the effects of reducing alcohol content in isopropyl alcohol/water (IPA/H2O) binary mixtures as DM on the structural evolution of water-rich (green) catalyst ink using contrast-variation small-angle and ultrasmall-angle neutron scattering techniques. Both qualitative and quantitative information are extracted from the data to obtain information about the size, structure, and organization of the catalyst ink using different model functions fit to the experimental data. The catalyst ink prepared using 70% IPA (commonly employed in industry and extensively reported in the literature) is shown to consist of randomly distributed globular carbon aggregates (mean radius of gyration of ∼178.9 nm) stabilized by an ionomer mass fractal shell (thickness of ∼13.0 nm), which is dispersed in the matrix of rodlike (∼1.3 nm radius and ∼35.0 nm length) negatively surface-charged ionomer NPs. These well characterized baseline data are then compared and contrasted with DM formulations of lower IPA content. A sequential reduction in IPA content of DM shows a progressive increase in the ionomer NP radius and electrostatic repulsion, concomitantly with the decrease in the carbon aggregate size and ionomer shell thickness of the catalyst ink. Therefore, the changes in the interfacial structure via adjustments of the DM composition can be used as a controlling parameter to tailor the hierarchical structure of the colloidal fuel cell catalyst ink and to further optimize the performance of the ECL.

Chain shape and thin film behaviour of poly(thiophene)-graft-poly(acrylate urethane).

Electronic graft copolymers with conjugated polymer backbones are emerging as promising materials for various organic electronics. These materials combine the advantages of organic electronic materials, such as molecular tunability of opto-electronic and electrochemical properties, with solution processability and other 'designer' physical and mechanical properties imparted through the addition of grafted polymer side chains. Future development of such materials with complex molecular architecture requires a better understanding of the effect of molecular parameters, such as side chain length, on the structure and, in turn, on the electronic properties. In this study, poly(thiophene)-graft-poly(acrylate urethane) (PTh-g-PAU) was examined as a model system and we investigate the effect of side chain length on the overall shape and size in solution. Furthermore, the changes in the swelling behaviour of the graft copolymer thin films help in understanding their electrochemical redox properties.

Biomineralization of Calcium Phosphate and Calcium Carbonate within Iridescent Chitosan/Iota-Carrageenan Multilayered Films.

This work systematically explores the biomineralization of calcium phosphate (CaP) and carbonate (CaCO3) within chitosan/iota-carrageenan multilayer films. Multilayer films of chitosan and iota-carrageenan (up to 128-coupled layers) were prepared on glass substrates by a layer-by-layer dip-coating technique. Cryo-scanning electron microscopy revealed dense interfaces between the chitosan and iota-carrageenan layers with thicknesses in the range 250 and 350 nm in the hydrated state, accounting for the iridescent nature of multilayer films when wet. Immersion of the multilayered films in simulated body fluid or simulated seawater at 25 °C resulted in the mineralization of CaP and CaCO3, respectively, at the interfaces between the biopolymer layers and modified the iridescence of the films. Lamellar scattering features in small-angle neutron scattering measurements of the mineralized films provided evidence of the localized mineralization. Further evidence of this was found through the lack of change in the dynamic and static correlation lengths of the polymer networks within the bulk phase of the chitosan and iota-carrageenan layers. CaP mineralization occurred to a greater extent than CaCO3 mineralization within the films, evidenced by the higher lamellar density and greater rigidity of the CaP-mineralized films. Results provide valuable new insights into CaP and CaCO3 biomineralization in biopolymer networks.

Morphology-Mediated Photoresponsive and Fluorescence Behaviors of Azobenzene-Containing Block Copolymers.

We investigated the relationship between the self-assembled morphology of poly( tert-butyl acrylate)- block-poly(6-[4-(4'-methoxyphenylazo)phenoxy]hexyl methacrylate) (P tBA- b-PAzoMA) block copolymers and their photoresponsive and fluorescence behaviors. The morphology of P tBA- b-PAzoMA copolymers was manipulated by dissolving them in mixed dimethylformamide (DMF)/hexanol solvents. When P tBA- b-PAzoMA was dissolved in DMF-rich (neutral) solvents, a favorable interaction between the DMF molecules and both blocks resulted in a random-coiled conformation. The unconfined morphology facilitated the formation of both nonassociated and head-to-head organized azobenzene mesogens, which promoted fluorescence emission. When hexanol, a P tBA-selective solvent, was added to DMF, the solvency of P tBA- b-PAzoMA worsened, leading to its assembly into micelles, with PAzoMA in the micelle core. The confinement of azobenzene moieties in the micelle core hindered their trans-to- cis photoisomerization, thereby considerably decreasing the kinetics of photoisomerization and the population of cis isomers. Additionally, a nanoconfined geometry resulted in compactly packed chromophores, causing fluorescence loss. When P tBA- b-PAzoMA was exposed to UV light, the increased number of cis isomers hampered the closely packed mesogens, resulting in a substantial enhancement of fluorescence emission. When the mole fraction of the PAzoMA block was increased, P tBA- b-PAzoMA formed clusters, causing the slow kinetics of photoisomerization and fluorescence quenching.