MgB2 Superconducting Joint Architecture with the Functionality to Screen External Magnetic Fields for MRI Magnet Applications.

A superconducting joint architecture to join unreacted carbon-doped multifilament magnesium diboride (MgB2) wires with the functionality to screen external magnetic fields for magnetic resonance imaging (MRI) magnet applications is proposed. The intrinsic diamagnetic property of a superconducting MgB2 bulk was exploited to produce a magnetic field screening effect around the current transfer path within the joint. Unprecedentedly, the joint fabricated using this novel architecture was able to screen magnetic fields up to 1.5 T at 20 K and up to 2 T at 15 K and thereby almost nullified the effect of the applied magnetic field by maintaining a constant critical current (Ic). The joint showed an Ic of 30.8 A in 1.5 T at 20 K and an ultralow resistance of about 3.32 × 10-14 Ω at 20 K in a self-field. The magnetic field screening effect shown by the MgB2 joint is expected to be extremely valuable for MRI magnet applications, where the Ic of the joints is lower than the Ic of the connected MgB2 wires in a given magnetic field and temperature.

Superconducting Joining Concept for Internal Magnesium Diffusion-Processed Magnesium Diboride Wires.

A superconducting joint of unreacted monofilament internal magnesium diffusion-processed magnesium diboride (MgB2) wires was fabricated by exploiting the phenomenon of magnesium diffusion into the boron layer inside the superconducting joint. Unprecedentedly, the joint was able to carry an almost identical transport current compared to the bare wire in a 2-7 T magnetic field at 20 K. The joint also exhibited very low joint resistance of 2.01 × 10-13 Ω in self-field at 20 K. Among commercially available superconductors, this work is the first to successfully realize a superconducting joint that is capable of transferring current from one conductor to another without any notable degradation under strong magnetic fields. This work demonstrates great potential to apply MgB2 in a range of practical applications, where superconducting joints are essential.

Niobium-titanium (Nb-Ti) superconducting joints for persistent-mode operation.

Superconducting joints are essential for persistent-mode operation in a superconducting magnet system to produce an ultra-stable magnetic field. Herein, we report rationally designed niobium-titanium (Nb-Ti) superconducting joints and their evaluation results in detail. For practical applications, superconducting joints were fabricated by using a solder matrix replacement method with two types of lead-bismuth (Pb-Bi) solder, including Pb42Bi58 as a new composition. All the joints attained a critical current of >200 A below 1.43 T at 4.2 K. Our optimized superconducting joining method was tested in a closed-loop coil, obtaining a total circuit resistance of 3.25 × 10-14 Ω at 4.2 K in self-field. Finally, persistent-mode operation was demonstrated in an Nb-Ti solenoid coil with a persistent-current switch. This work will pave the way to developing high-performance Nb-Ti superconducting joints for practical applications.

Achievement of practical level critical current densities in Ba1-xKxFe2As2/Ag tapes by conventional cold mechanical deformation.

The recently discovered iron-based superconductors are potential candidates for high-field magnet applications. However, the critical current densities (J(c)) of iron-based superconducting wires remain far below the level needed for practical applications. Here, we show that the transport Jc of Ba1-xKxFe2As2/Ag tapes is significantly enhanced by the combination process of cold flat rolling and uniaxial pressing. At 4.2 K, Jc exceeds the practical level of 10(5) A/cm(2) in magnetic fields up to 6 T. The J(c)-H curve shows extremely small magnetic field dependence and maintains a high value of 8.6 × 10(4) A/cm(2) in 10 T. These are the highest values reported so far for iron-based superconducting wires. Hardness measurements and microstructure investigations reveal that the superior J(c) in our samples is due to the high core density, more textured grains, and a change in the microcrack structure. These results indicate that iron-based superconductors are very promising for high magnetic field applications.

Peptidoglycan recognition protein (PGRP) from eri-silkworm, Samia cynthia ricini; protein purification and induction of the gene expression.

Peptidoglycan recognition protein (PGRP) was isolated from immunized hemolymph of the wild silkworm, Samia cynthia ricini, detecting the biding activity with (125)I-labeled peptidoglycan (PGN). The binding specificity of PGRP was tested by competitive inhibition of the binding to (125)I-labeled-PGN by a large excess amount of non-labeled-PGN or other glucans. The binding to labeled uncross-linked Lys-type PGN from Micrococcus luteus was strongly inhibited by non-labeled-PGN of the same structure and meso-diaminopimelic acid (DAP)-type cross-linked PGN from Bacillus cell wall, but only a little by cross-linked PGN from M. luteus cell wall. The PGRP cDNA encodes a 193 amino acid open reading frame. The deduced amino acid sequence had 62 to 91% identities to known lepidopteran PGRPs, but less than 40% to Drosophila PGRPs. The PGRP gene constitutively expressed at a low level in naive fat body, and strongly induced by an injection of DAP-type cross-linked and Lys-type uncross-linked PGNs, but only weakly by Lys-type cross-linked PGN from M. luteus. The silkworm possibly distinguish between PGNs based on the structure of cross-linking peptide, but has less if any preference for the diamino acid residue of the stem peptide.