RESUMEN
Residential building material stock constitutes a significant part of the built environment, providing crucial shelter and habitat services. The hypothesis concerning stock mass and composition has garnered considerable attention over the past decade. While previous research has mainly focused on the spatial analysis of building masses, it often neglected the component-level stock analysis or where heavy labor cost for onsite survey is required. This paper presents a novel approach for efficient component-level residential building stock accounting in the United Kingdom, utilizing drive-by street view images and building footprint data. We assessed four major construction materials: brick, stone, mortar, and glass. Compared to traditional approaches that utilize surveyed material intensity data, the developed method employs automatically extracted physical dimensions of building components incorporating predicted material types to calculate material mass. This not only improves efficiency but also enhances accuracy in managing the heterogeneity of building structures. The results revealed error rates of 5 and 22% for mortar and glass mass estimations and 8 and 7% for brick and stone mass estimations, with known wall types. These findings represent significant advancements in building material stock characterization and suggest that our approach has considerable potential for further research and practical applications. Especially, our method establishes a basis for evaluating the potential of component-level material reuse, serving the objectives of a circular economy.
RESUMEN
Urban resource models increasingly rely on implicit network formulations. Resource consumption behaviours documented in the existing empirical studies are ultimately by-products of the network abstractions underlying these models. Here, we present an analytical formulation and examination of a generic demand-driven network model that accounts for the effectiveness of resource utilization and its implications for policy levers in addressing resource management in cities. We establish simple limiting boundaries to systems' resource effectiveness. These limits are found not to be a function of system size and to be simply determined by the system's average ability to maintain resource quality through its transformation processes. We also show that resource utilization in itself does not enjoy considerable size efficiencies with larger and more diverse systems only offering increased chances of finding matching demand and supply between existing sectors in the system.
RESUMEN
Traditional real-time air quality monitoring instruments are expensive to install and maintain; therefore, such existing air quality monitoring networks are sparsely deployed and lack the measurement density to develop high-resolution spatiotemporal air pollutant maps. More recently, low-cost sensors have been used to collect high-resolution spatial and temporal air pollution data in real-time. In this paper, for the first time, Envirowatch E-MOTEs are employed for air quality monitoring as a case study in Sheffield. Ten E-MOTEs were deployed for a year (October 2016 to September 2017) monitoring several air pollutants (NO, NO2, CO) and meteorological parameters. Their performance was compared to each other and to a reference instrument installed nearby. E-MOTEs were able to successfully capture the temporal variability such as diurnal, weekly and annual cycles in air pollutant concentrations and demonstrated significant similarity with reference instruments. NO2 concentrations showed very strong positive correlation between various sensors. Mostly, correlation coefficients (r values) were greater than 0.92. CO from different sensors also had r values mostly greater than 0.92; however, NO showed r value less than 0.5. Furthermore, several multiple linear regression models (MLRM) and generalised additive models (GAM) were developed to calibrate the E-MOTE data and reproduce NO and NO2 concentrations measured by the reference instruments. GAMs demonstrated significantly better performance than linear models by capturing the non-linear association between the response and explanatory variables. The best GAM developed for reproducing NO2 concentrations returned values of 0.95, 3.91, 0.81, 0.005 and 0.61 for factor of two (FAC2), root mean square error (RMSE), coefficient of determination (R2), normalised mean biased (NMB) and coefficient of efficiency (COE), respectively. The low-cost sensors offer a more affordable alternative for providing real-time high-resolution spatiotemporal air quality and meteorological parameter data with acceptable performance.
Asunto(s)
Contaminantes Atmosféricos/análisis , Contaminación del Aire/análisis , Monitoreo del Ambiente/instrumentación , Calibración , Monóxido de Carbono/análisis , Ciudades , Monitoreo del Ambiente/métodos , Modelos Lineales , Óxido Nítrico/análisis , Dióxido de Nitrógeno/análisis , Material Particulado/análisis , Factores de Tiempo , Reino UnidoRESUMEN
Vehicular traffic congestion is a significant problem that arises in many cities. This is due to the increasing number of vehicles that are driving on city roads of limited capacity. The vehicular congestion significantly impacts travel distance, travel time, fuel consumption and air pollution. Avoidance of traffic congestion and providing drivers with optimal paths are not trivial tasks. The key contribution of this work consists of the developed approach for dynamic calculation of optimal traffic routes. Two attributes (the average travel speed of the traffic and the roads' length) are utilized by the proposed method to find the optimal paths. The average travel speed values can be obtained from the sensors deployed in smart cities and communicated to vehicles via the Internet of Vehicles and roadside communication units. The performance of the proposed algorithm is compared to three other algorithms: the simulated annealing weighted sum, the simulated annealing technique for order preference by similarity to the ideal solution and the Dijkstra algorithm. The weighted sum and technique for order preference by similarity to the ideal solution methods are used to formulate different attributes in the simulated annealing cost function. According to the Sheffield scenario, simulation results show that the improved simulated annealing technique for order preference by similarity to the ideal solution method improves the traffic performance in the presence of congestion by an overall average of 19.22% in terms of travel time, fuel consumption and CO2 emissions as compared to other algorithms; also, similar performance patterns were achieved for the Birmingham test scenario.