Development, physicochemical characterization and in-vitro biocompatibility study of dromedary camel dentine derived hydroxyapatite for bone repair.

This study aimed to produce hydroxyapatite from the dentine portion of camel teeth using a defatting and deproteinizing procedure and characterize its physicochemical and biocompatibility properties. Biowaste such as waste camel teeth is a valuable source of hydroxyapatite, the main inorganic constituent of human bone and teeth which is frequently used as bone grafts in the biomedical field. Fourier Transform infrared (FTIR), and micro-Raman spectroscopy confirmed the functional groups as-sociated with hydroxyapatite. X-ray diffraction (XRD) studies showed camel dentine-derived hydroxyapatite (CDHA) corresponded with hydroxyapatite spectra. Scanning electron micros-copy (SEM) demonstrated the presence of dentinal tubules measuring from 1.69-2.91 µm. The inorganic phases of CDHA were primarily constituted of calcium and phosphorus, with trace levels of sodium, magnesium, potassium, and strontium, according to energy dispersive X-ray analysis (EDX) and inductively coupled plasma mass spectrometry (ICP-MS). After 28 days of incubation in simulated body fluid (SBF), the pH of the CDHA scaffold elevated to 9.2. in-vitro biocompatibility studies showed that the CDHA enabled Saos-2 cells to proliferate and express the bone marker osteonectin after 14 days of culture. For applications such as bone augmentation and filling bone gaps, CDHA offers a promising material. However, to evaluate the clinical feasibility of the CDHA, further in-vivo studies are required.

Extraction of Hydroxyapatite from Camel Bone for Bone Tissue Engineering Application.

Waste tissues such as mammalian bone are a valuable source from which to extract hydroxyapatite. Camel bone-based hydroxyapatite (CBHA) was extracted from the femur of camel bones using a defatting and deproteinization procedure. The extracted CBHA was mechanically, chemically, physically, morphologically and structurally characterized. Fourier-Transform Infra-Red (FTIR) spectra, Micro-Raman, and X-ray diffraction analysis confirmed successful extraction of hydroxyapatite. The mechanical properties of the CBHA scaffold were measured using a Universal Instron compression tester. Scanning electron microscopy showed the presence of a characteristic interconnected porous architecture with pore diameter ranging from 50-600 µm and micro-computer tomography (Micro-CT) analysis identified a mean porosity of 73.93. Thermogravimetric analysis showed that the CBHA was stable up to 1000 °C and lost only 1.435% of its weight. Inductively coupled plasma-mass spectrometry (ICP-MS) and Energy-dispersive-X-ray (EDX) analysis demonstrated the presence of significant amounts of calcium and phosphorus and trace ions of sodium, magnesium, zinc, lead and strontium. Following 21 days of incubation in simulated body fluid (SBF), the pH fluctuated between 10-10.45 and a gradual increase in weight loss was observed. In conclusion, the extracted CBHA is a promising material for future use in bone tissue regeneration applications.

Colossal Permittivity Characteristics of (Nb, Si) Co-Doped TiO2 Ceramics.

(Nb5+, Si4+) co-doped TiO2 (NSTO) ceramics with the compositions (Nb0.5Si0.5)xTi1−xO2, x = 0, 0.025, 0.050 and 0.1 were prepared with a solid-state reaction technique. X-ray diffraction (XRD) patterns and Raman spectra confirmed that the tetragonal rutile is the main phase in all the ceramics. Additionally, XRD revealed the presence of a secondary phase of SiO2 in the co-doped ceramics. Impedance spectroscopy analysis showed two contributions, which correspond to the responses of grain and grain-boundary. All the (Nb, Si) co-doped TiO2 showed improved dielectric performance in the high frequency range (>103 Hz). The sample (Nb0.5Si0.5)0.025Ti0.975O2 showed the best dielectric performance in terms of higher relative permittivity (5.5 × 104) and lower dielectric loss (0.18), at 10 kHz and 300 K, compared to pure TiO2 (1.1 × 103, 0.34). The colossal permittivity of NSTO ceramics is attributed to an internal barrier layer capacitance (IBLC) effect, formed by insulating grain-boundaries and semiconductor grains in the ceramics.

Influence of Lime and Volcanic Ash on the Properties of Dune Sand as Sustainable Construction Materials.

This study focused on evaluating dune sand stabilized with lime and volcanic ash as base course materials in engineering construction. Dune sands are found in Saudi Arabia in huge quantities. Due to the high demand for construction materials, this makes them highly suitable for construction. A testing program was designed to investigate the effect of adding different percentages by weight of lime (L: 0, 2, 4, and 6%) and volcanic ash (VA: 0, 1, 3, and 5%) on the engineering properties of the stabilized mixture. Unconfined compressive strength (UCS) and California bearing ratio (CBR) tests were conducted. In addition, Raman spectroscopy and laser-scanning microscopy (LSM) tests were performed to explore the chemical characteristic, packing, and structure of the mixture. The results showed that the UCS, CBR, and the Young's modulus (Es) of the treated dune sand increased with the increase in percentage of both stabilizers. Furthermore, LSM images of mortar blended with intermediate L-to-VA blend ratio ≈0.55 (L: 6% and VA: 5%) exhibit compact packing of sand grains, indicating strong adhesion and higher cementing value. The results of the study are promising and encourage using the treated dune sand in engineering construction even with a low percentage use of lime (2%) and volcanic ash (1-3%) as stabilizers.

Structural and Optical Characteristics of Highly UV-Blue Luminescent ZnNiO Nanoparticles Prepared by Sol-Gel Method.

A simple single pot sol-gel method is used to prepare ZnNiO nanoparticles at assorted Ni doping levels, 1, 3, 7 and 10 wt.%. Structural and optical properties of nanoparticles are studied by X-ray diffraction (XRD), UV-visible diffuse reflection spectroscopy (DRS), photoluminescence (PL) measurements, scanning electron microscopy (SEM), µ-Raman and X-ray photoelectron-spectroscopy (XPS). A single substitutional solid solution phase is detected in the wurtzite ZnNiO nanoparticles at various doping levels. XRD peak splitting and shifting is ascribed to reduced wurtzite character and presence of crystalline strain in nanoparticles at higher level of Ni doping. The Kubelka-Munk function of DRS data reveals the presence of the Burstein-Moss effect in the optical absorption of ZnNiO nanoparticles. Photoluminescence studies show intense UV-blue emission from ZnNiO nanoparticles. The UV PL also exhibits the Burstein-Moss blue shift in the ZnNiO luminescence. Raman analyses also confirms the wurtzite structure of ZnNiO nanoparticles; however, crystal structural defects and bond stiffness increase with Ni doping. The optical and structural studies presented in this work are pointing towards a multivalent Ni substitution in the nanoparticles.

Aqueous Synthesis of Triphenylphosphine-Modified Gold Nanoparticles for Synergistic In Vitro and In Vivo Photothermal Chemotherapy.

Triphenylphosphine (TPP) surface-functionalized and F-108 Pluronic-stabilized gold nanoparticles (F-108@TPP-AuNPs) have been synthesized through a one-step approach, leading to well-defined (9.6±1.6 nm) and water-soluble nanoparticles by microwave heating an aqueous solution of TPP-AuI Cl in the presence of a Pluronic polymer under basic conditions. TPP release was negligible under physiological conditions, but enhanced significantly at an acidic pH (5.4) mimicking that of a cancer cell. Laser irradiation (532 nm) raised the temperature of an aqueous solution of F-108@TPP-AuNPs to 51.7 °C within 5 min, confirming efficient light-to-heat conversion capabilities without significant photodegradation. TEM confirmed intracellular localization of F-108@TPP-AuNPs in the cytosol, endosomes and lysosomes of HeLa cells. F-108@TPP-AuNPs were well tolerated by HeLa cells and zebrafish embryos at ambient temperatures and became toxic upon heat activation, suggesting synergistic interactions between heat and cytotoxic action by TPP.

Cobalt-carbon/silica nanocomposites prepared by pyrolysis of a cobalt 2,2'-bipyridine terephthalate complex for remediation of cationic dyes.

Recently, carbon nanostructures have attracted interest because of their unique properties and interesting applications. Here, CoC@SiO2-850 (3) and CoC@SiO2-600 (4) cobalt-carbon/silica nanocomposites were prepared by solid-state pyrolysis of anthracene with Co(tph)(2,2'-bipy)·4H2O (1) complex in the presence of silica at 850 and 600 °C, respectively, where 2,2'-bipy is 2,2'-bipyridine and tph is the terephthalate dianion. Moreover, Co(µ-tph)(2,2'-bipy) (2) was isolated and its X-ray structure indicated that cobalt(ii) has a distorted trigonal prismatic coordination geometry. 2 is a metal-organic framework consisting of one-dimensional zigzag chains within a porous grid network. 3 and 4 consist of cobalt(0)/cobalt oxide nanoparticles with a graphitic shell and carbon nanotubes embedded in the silica matrix. They were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). XPS revealed that the nanocomposites are functionalized with oxygen-containing groups, such as carboxylic acid groups. In addition, the presence of metallic cobalt nanoparticles embedded in graphitized carbon was verified by XRD and TEM. The efficiency of 3 for adsorption of crystal violet (CV) dye was investigated by batch and column experiments. At 25 °C, the Langmuir adsorption capacity of 3 for CV was 214.2 mg g-1 and the fixed-bed column capacity was 36.3 mg g-1. The adsorption data were well fitted by the Freundlich isotherm and pseudo-second-order kinetic model. The adsorption process was spontaneous and endothermic.

Thioether-Crown-Rich Calix[4]arene Porous Polymer for Highly Efficient Removal of Mercury from Water.

A rational design of adsorbents with high uptake efficiency and fast kinetics for highly toxic pollutants is a key challenge in environmental remediation. Here, we report the design of a well-defined thioether-crown-rich porous calix[4]arene-based mesoporous polymer S-CX4P and its utility in removal of highly relevant toxic mercury (Hg2+) from water. The polymer shows an exceptional, record-high uptake efficiency of 1686 mg g-1 and the fastest initial adsorption rate of 278 mg g-1 min-1. Remarkably, S-CX4P can effectively remove Hg2+ from high concentration (5 ppm) to below the acceptable limit for drinking water (2 ppb) even in the presence of other competitive metals at high concentrations. In addition, the polymer can be easily regenerated at room temperature and reused multiple times with negligible loss in uptake rate and efficiency. The results demonstrate the potential of rationally designed thioether-crown-rich polymers for high performance mercury removal.

Cement-Stabilized Waste Sand as Sustainable Construction Materials for Foundations and Highway Roads.

In this study, cement-treated waste sand as a by-product material produced from Al-Ahsa quarries (Saudi Arabia) was experimentally tested and investigated as a base course material for the foundation of structures and roads. The study aimed to use the waste sand as a construction material by improving its strength, bearing capacity, and stiffness. The waste sand was mixed with different percentages of Portland cement content (0, 2, 4, 6, and 8%) at the maximum dry density and optimum water content of the standard Proctor compaction conditions of a non-treated sample. Unconfined compressive strength and California Bearing Ratio (CBR) tests for different curing times were conducted. X-ray diffraction (XRD), laser-scanning microscopy (LSM), and X-ray spectroscopy (XPS) were used to explore the microstructure and composition of the treated sand. The results showed that the compressive strength, initial tangent modulus, and CBR of the treated sand increase with the increase in cement content and curing time. Furthermore, good correlations were established among the strength, initial tangent modulus, and CBR. Based on the obtained results, cement-stabilized waste sand is a potential material for use in construction. This is expected to save the environment and reduce the cost of road construction.

Palladium-Loaded Cucurbit[7]uril-Modified Iron Oxide Nanoparticles for C-C Cross-Coupling Reactions.

Cucurbit[7]uril modified iron oxide nanoparticles (CB[7]NPs) were loaded with palladium to form nano-catalysts (Pd@CB[7]NPs) that, with microwave heating, catalysed Suzuki-Miyaura, Sonogashira, and Mizoroki-Heck cross-coupling reactions. Reactions were run in environmentally benign 1:1 ethanol/water solvent under convenient aerobic conditions. In a preliminary screening, conversions and yields were uniformly high with turn over frequencies (TOF) ranging from 64 to 7360 h-1 . The nano-catalysts could be recovered with a magnet and reused several times (6 times for Suzuki-Miayura reaction) without loss of activity.

Sequential Delivery of Doxorubicin and Zoledronic Acid to Breast Cancer Cells by CB[7]-Modified Iron Oxide Nanoparticles.

Drug-loaded magnetic nanoparticles were synthesized and used for the sequential delivery of the antiresorptive agent zoledronic acid (Zol) and the cytotoxic drug doxorubicin (Dox) to breast cancer cells (MCF-7). Zol was attached to bare iron oxide nanoparticles (IONPs) via phosphonate coordination to form Z-NPs. The unbound imidazole of Zol was then used to complex the organic macrocycle CB[7] to obtain CZ-NPs. Dox was complexed to the CZ-NPs to form the fully loaded particles (DCZ-NPs), which were stable in solution at 37 °C and physiological pH (7.4). Fluorescence spectroscopy established that Dox is released in solution from DCZ-NPs suddenly (i) when the particles are subjected to magnetically induced heating to 42 °C at low pH (5.0) and (ii) in the presence of glutathione (GSH). Mass spectrometry indicated that Zol is released slowly in solution at low pH after Dox release. Magnetic measurements with a magnetic reader revealed that DCZ-NPs are internalized preferentially by MCF-7 cells versus nonmalignant cells (HEK293). Zol and Dox acted synergistically when delivered by the particles. DCZ-NPs caused a decrease in the viability of MCF-7 cells that was greater than the net decrease caused when the drugs were added to the cells individually at concentrations equivalent to those delivered by the particles. MCF-7 cells were treated with DCZ-NPs and subjected to an alternating magnetic field (AMF) which, with the nanoparticles present, raised the temperature of the cells and triggered the intracellular release of Dox, as indicated by fluorescence activated cell sorting (FACS). The cytotoxic effects of the DCZ-NPs on MCF-7 cells were enhanced 10-fold by AMF-induced heating. DCZ-NPs were also able to completely inhibit MCF-7 cell adhesion and invasion in vitro, indicating the potential of the particles to act as antimetastatic agents. Together these results demonstrate that DCZ-NPs warrant development as a system for combined chemo- and thermo-therapeutic treatment of cancer.

Precursor-route ZnO films from a mixed casting solvent for high performance aqueous electrolyte-gated transistors.

We significantly improved the performance of precursor-route semiconducting zinc oxide (ZnO) films in electrolyte-gated thin film transistors (TFTs). We find that the organic precursor to ZnO, zinc acetate (ZnAc), dissolves more readily in a 1 : 1 mixture of ethanol (EtOH) and acetone than in pure EtOH, pure acetone, or pure isopropanol. XPS and SEM characterisation show improved morphology of ZnO films converted from a mixed solvent cast ZnAc precursor compared to the EtOH cast precursor. When gated with a biocompatible electrolyte, phosphate buffered saline (PBS), ZnO thin film transistors (TFTs) derived from mixed solvent cast ZnAc give 4 times larger field effect current than similar films derived from ZnAc cast from pure EtOH. The sheet resistance at VG = VD = 1 V is 30 kΩ â–¡(-1), lower than for any organic TFT, and lower than for any electrolyte-gated ZnO TFT reported to date.

Universal, geometry-driven hydrophobic behaviour of bare metal nanowire clusters.

A parallel array of isolated metal nanowires is expected to be hydrophilic. We show, however, that a clustering of such nanowires brought about by vacuum drying produces a 'dual-scale roughness' and confers a strongly hydrophobic property to the surface. The mean size of the nanowire clusters as well as the contact angle are both found to be related to the wire length, and the critical wire length above which the surface becomes hydrophobic is ≈10 µm. Surface roughness is generally known to enhance water-repellent properties, but this is the first report of roughness-induced hydrophobicity on a bare (uncoated) metallic surface.