Greywater treatment in a green wall using different filter materials and hydraulic loading rates.

Green walls in urban environments can be both an aesthetic feature and be of practical use in greywater treatment. This study evaluates the effect of different loading rates (4.5 l/d, 9 l/d, and 18 l/d) on the efficiency of treating actual greywater from a city district in a pilot-scale green wall with five different filter materials as substrates (biochar, pumice, hemp fiber, spent coffee grounds (SCG), and composted fiber soil (CFS)). Three cool climate plant species, Carex nigra, Juncus compressus, and Myosotis scorpioides, were chosen for the green wall. The following parameters were evaluated: biological oxygen demand (BOD), fractions of organic carbon, nutrients, indicator bacteria, surfactants, and salt. Three of the five materials investigated - biochar, pumice, and CFS - showed promising treatment efficiencies. The respective overall reduction efficiencies of BOD, total nitrogen (TN) and total phosphorus (TP) were 99%, 75%, and 57% for biochar; 96%, 58%, and 61% for pumice; and 99%, 82% and 85% for CFS. BOD was stable in the biochar filter material with effluent concentrations of 2 mg/l across all investigated loading rates. However, higher loading rates had a significantly negative effect on hemp and pumice for BOD. Interestingly, the highest loading rate (18 l/d) flowing over pumice removed the highest levels of TN (80%) and TP (86%). Biochar was the most effective material in removing indicator bacteria, with a 2.2-4.0 Log10 reduction for E. coli and enterococci. SCG was the least efficient material, giving a higher BOD in the effluent than in the influent. Therefore, this study presents the potential of natural and waste-derived filter materials to treat greywater effectively and the results can contribute to the future development of nature-based greywater treatment and management practices in urban areas.

Plants against pathogens: Effect of significant antimicrobial-producing plants on faecal microbe inactivation throughout the soil profile of stormwater biofilters.

Stormwater biofilters have demonstrated promising yet variable removal of faecal microorganisms. Significant antimicrobial-producing plants have been proposed as an inexpensive, safe and easily adaptable component of biofilter design to enhance faecal pathogen treatment. The aim of the present study was to investigate whether significant antimicrobial-producing plants improved faecal bacterial inactivation throughout the biofilter soil profile, focusing on four key treatment zones. These were specifically the top sediment/surface layer; the rhizosphere (soil directly attached to and influenced by plant roots); bulk soil (soil not directly associated with roots); and the submerged/saturated zone. Biofilters were configured with either: (1) no plant; (2) Carex appressa, the most highly recommended plant species in Australian biofilter adoption guidelines; or (3) one of two significant antimicrobial-producing Australian plant species, Melaleuca linariifolia or Melaleuca fulgens (n = 3 each). Following 16 months' maturation, systems were dosed with semi-synthetic stormwater containing faecal bacteria Escherichia coli and Enterococcus faecalis to monitor their ensuing die-off within all major biofilter treatment zones. Bacterial inactivation was generally more rapid in M. fulgens and M. linariifolia than C. appressa biofilters, with E. faecalis demonstrating an overall enhanced resistance to inactivation. Top sediment tended to exhibit the highest inactivation rates, significantly correlated with sunlight exposure. Conversely, the rhizosphere supported comparatively prolonged faecal bacterial survival. The authors recommend further investigation of melaleucas and similar highly antimicrobial-producing plants for enhanced faecal pathogen treatment within biofilters and related treatment contexts.

Calibration and sensitivity analysis of a novel water flow and pollution model for future city planning: Future Urban Stormwater Simulation (FUSS).

Planning for future urban development and water infrastructure is uncertain due to changing human activities and climate. To quantify these changes, we need adaptable and fast models that can reliably explore scenarios without requiring extensive data and inputs. While such models have been recently considered for urban development, they are lacking for stormwater pollution assessment. This work proposes a novel Future Urban Stormwater Simulation (FUSS) model, utilizing a previously developed urban planning algorithm (UrbanBEATS) to dynamically assess pollution changes in urban catchments. By using minimal input data and adding stochastic point-source pollution to the build-up/wash-off approach, this study highlights calibration and sensitivity analysis of flow and pollution modules, across the range of common stormwater pollutants. The results highlight excellent fit to measured values in a continuous rainfall simulation for the flow model, with one significant calibration parameter. The pollution model was more variable, with TSS, TP and Pb showing high model efficiency, while TN was predicted well only across event-based assessment. The work further explores the framework for the model application in future pollution assessment, and points to the future work aiming to developing land-use dependent model parameter sets, to achieve flexibility for model application across varied urban catchments.

Illicit discharge detection in stormwater drains using an Arduino-based low-cost sensor network.

Illicit discharges in urban stormwater drains are a major environmental concern that deteriorate downstream waterway health. Conventional detection methods such as stormwater drain visual inspection and dye testing have fundamental drawbacks and limitations which can prevent easy location and elimination of illegal discharges in a catchment. We deployed 22 novel low-cost level, temperature and conductivity sensors across an urban catchment in Melbourne for a year to monitor the distributed drainage network, thereby detecting likely illicit discharges ranging from a transitory flow with less than 10 minutes to persistent flows lasting longer than 20 hours. We discuss rapid deployment methods, real-time data collection and online processing. The ensemble analysis of all dry weather flow data across all sites indicates that: (i) large uncertainties are associated with discharge frequency, duration, and variation in water quality within industrial and residential land uses; (ii) most dry weather discharges are intermittent and transient flows which are difficult to detect and not simply due to cross-connections with the sewerage network; (iii) detectable diurnal discharge patterns can support mitigation efforts, including policies and regulatory measures (e.g., enforcement or education) to protect receiving waterways; and, (iv) that it is possible to cost effectively isolate sources of dry weather pollution using a distributed sensor network.

Rise of the killer plants: investigating the antimicrobial activity of Australian plants to enhance biofilter-mediated pathogen removal.

BACKGROUND: Biofilters are soil-plant based passive stormwater treatment systems which demonstrate promising, although inconsistent, removal of faecal microorganisms. Antimicrobial-producing plants represent a safe, inexpensive yet under-researched biofilter design component that may enhance treatment reliability. The mechanisms underlying plant-mediated microbial removal in biofilters have not been fully elucidated, particularly with respect to antimicrobial production. The aim of this study was therefore to inform biofilter vegetation selection guidelines for optimal pathogen treatment by conducting antimicrobial screening of biofilter-suitable plant species. This involved: (1) selecting native plants suitable for biofilters (17 species) in a Victorian context (southeast Australia); and (2) conducting antimicrobial susceptibility testing of selected plant methanolic extracts (≥ 5 biological replicates/species; 86 total) against reference stormwater faecal bacteria (Salmonella enterica subsp. enterica ser. Typhimurium, Enterococcus faecalis and Escherichia coli). RESULTS: The present study represents the first report on the inhibitory activity of polar alcoholic extracts from multiple tested species. Extracts of plants in the Myrtaceae family, reputed for their production of antimicrobial oils, demonstrated significantly lower minimum inhibitory concentrations (MICs) than non-myrtaceous candidates (p < 0.0001). Melaleuca fulgens (median MIC: 8 mg/mL; range: [4-16 mg/mL]), Callistemon viminalis (16 mg/mL, [2-16 mg/mL]) and Leptospermum lanigerum (8 mg/mL, [4-16 mg/mL]) exhibited the strongest inhibitory activity against the selected bacteria (p < 0.05 compared to each tested non-myrtaceous candidate). In contrast, the Australian biofilter gold standard Carex appressa demonstrated eight-fold lower activity than the highest performer M. fulgens (64 mg/mL, [32-64 mg/mL]). CONCLUSION: Our results suggest that myrtaceous plants, particularly M. fulgens, may be more effective than the current vegetation gold standard in mediating antibiosis and thus improving pathogen treatment within biofilters. Further investigation of these plants in biofilter contexts is recommended to refine biofilter vegetation selection guidelines.

New prebiotic chemistry inspired filter media for stormwater/greywater disinfection.

Greywater and stormwater have received significant attention due to increasing water scarcity. Passive filtration such as biofiltration has been a popular treatment method with its low energy input and environmental friendliness. However, pathogen removal capacity needs improvement to achieve safe water quality. In this study, a prebiotic chemistry inspired copolymer based on aminomalononitrile and 3,4,5-trihydroxybenzaldehyde (AMNT30) was introduced to develop antimicrobial media for passive filtration. The AMNT30 polymer provided an adhesive coating on zeolite substrates following a spontaneous polymerisation process at room temperature. AMNT30 coated media were investigated for metal loading capacity, surface morphology, E. coli removal and metal leaching after filtration of different water sources (i.e. stormwater, greywater, and deionised water) at low/high conductivity. The coating enhanced metal ion loading on the surface and demonstrated that >8 log reduction of E. coli can be achieved for silver loaded materials compared to a 1 log reduction for copper loaded materials. The coating also increased the stability of the metals on the media irrespective of inflow characteristics. This study provided the first example using AMNT30 to create antimicrobial water purification media. It is expected that this technology will find applications in the water treatment industry.

Modelling transitions in urban water systems.

Long term planning of urban water infrastructure requires acknowledgement that transitions in the water system are driven by changes in the urban environment, as well as societal dynamics. Inherent to the complexity of these underlying processes is that the dynamics of a system's evolution cannot be explained by linear cause-effect relationships and cannot be predicted under narrow sets of assumptions. Planning therefore needs to consider the functional behaviour and performance of integrated flexible infrastructure systems under a wide range of future conditions. This paper presents the first step towards a new generation of integrated planning tools that take such an exploratory planning approach. The spatially explicit model, denoted DAnCE4Water, integrates urban development patterns, water infrastructure changes and the dynamics of socio-institutional changes. While the individual components of the DAnCE4Water model (i.e. modules for simulation of urban development, societal dynamics and evolution/performance of water infrastructure) have been developed elsewhere, this paper presents their integration into a single model. We explain the modelling framework of DAnCE4Water, its potential utility and its software implementation. The integrated model is validated for the case study of an urban catchment located in Melbourne, Australia.

Source tracking using microbial community fingerprints: Method comparison with hydrodynamic modelling.

Urban estuaries around the world are experiencing contamination from diffuse and point sources, which increases risks to public health. To mitigate and manage risks posed by elevated levels of contamination in urban waterways, it is critical to identify the primary water sources of contamination within catchments. Source tracking using microbial community fingerprints is one tool that can be used to identify sources. However, results derived from this approach have not yet been evaluated using independent datasets. As such, the key objectives of this investigation were: (1) to identify the major sources of water responsible for bacterial loadings within an urban estuary using microbial source tracking (MST) using microbial communities; and (2) to evaluate this method using a 3-dimensional hydrodynamic model. The Yarra River estuary, which flows through the city of Melbourne in South-East Australia was the focus of this study. We found that the water sources contributing to the bacterial community in the Yarra River estuary varied temporally depending on the estuary's hydrodynamic conditions. The water source apportionment determined using microbial community MST correlated to those determined using a 3-dimensional hydrodynamic model of the transport and mixing of a tracer in the estuary. While there were some discrepancies between the two methods, this investigation demonstrated that MST using bacterial community fingerprints can identify the primary water sources of microorganisms in an estuarine environment. As such, with further optimization and improvements, microbial community MST has the potential to become a powerful tool that could be practically applied in the mitigation of contaminated aquatic systems.

Temperature dynamics of stormwater runoff in Australia and the USA.

Thermal pollution of surface waters by urban stormwater runoff is an often overlooked by-product of urbanization. Elevated stream temperatures due to an influx of stormwater runoff can be detrimental to stream biota, in particular for cold water systems. However, few studies have examined temperature trends throughout storm events to determine how these thermal inputs are temporally distributed. In this study, six diverse catchments in two continents are evaluated for thermal dynamics. Summary statistics from the data showed larger catchments have lower maximum runoff temperatures, minimum runoff temperatures, and temperature variability. This reinforces the understanding that subsurface drainage infrastructure in urban catchments acts to moderate runoff temperatures. The catchments were also evaluated for the presence of a thermal first flush using two methodologies. Results showed the lack of a first flush under traditional assessment methodologies across all six catchments, supporting the results from a limited number of studies in literature. However, the time to peak temperature was not always coincident with the time to peak flow, highlighting the variability of thermal load over time. When a new first flush methodology was applied, significant differences in temperature were noted with increasing runoff depth for five of the six sites. This study is the first to identify a runoff temperature first flush, and highlights the need to carefully consider the appropriate methodology for such analyses.

Residual indicator bacteria in autosampler tubing: a field and laboratory assessment.

Microbial contamination in surface waters has become a worldwide cause for concern. As efforts are made to reduce this contamination, monitoring is integral to documenting and evaluating water quality improvements. Autosamplers are beneficial in such monitoring efforts, as large data sets can be generated with minimized effort. The extent to which autosamplers can be utilized for microbial monitoring is largely unknown due to concerns over contamination. Strict sterilization regimes for components contacting the water being sampled are difficult, and sometimes logistically implausible, when utilizing autosamplers. Field experimentation showed contamination of fecal coliform in autosamplers to be more of a concern than that of Escherichia coli. Further study in a controlled laboratory environment suggested that tubing configuration has a significant effect on residual E. coli concentrations in sampler tubing. The amount of time that passed since the last sample was collected from a given sampler (antecedent dry weather period - DWP) tubing was also a significant factor. At a DWP of 7 days, little to no contamination was found. Thus, simple protocols such as providing positive drainage of tubing between sample events and programming samplers to include rinses will reduce concerns of contamination in autosamplers.

Survival of Escherichia coli in stormwater biofilters.

Biofilters are widely adopted in Australia for stormwater treatment, but the reported removal of common faecal indicators (such as Escherichia coli (E. coli)) varies from net removal to net leaching. Currently, the underlying mechanisms that govern the faecal microbial removal in the biofilters are poorly understood. Therefore, it is important to study retention and subsequent survival of faecal microorganisms in the biofilters under different biofilter designs and operational characteristics. The current study investigates how E. coli survival is influenced by temperature, moisture content, sunlight exposure and presence of other microorganisms in filter media and top surface sediment. Soil samples were taken from two different biofilters to investigate E. coli survival under controlled laboratory conditions. Results revealed that the presence of other microorganisms and temperature are vital stressors which govern the survival of E. coli captured either in the top surface sediment or filter media, while sunlight exposure and moisture content are important for the survival of E. coli captured in the top surface sediment compared to that of the filter media. Moreover, increased survival was found in the filter media compared to the top sediment, and sand filter media was found be more hostile than loamy sand filter media towards E. coli survival. Results also suggest that the contribution from the tested environmental stressors on E. coli survival in biofilters will be greatly affected by the seasonality and may vary from one site to another.

Uncertainty analysis in urban drainage modelling: should we break our back for normally distributed residuals?

This study presents results on the assessment of the application of a Bayesian approach to evaluate the sensitivity and uncertainty associated with urban rainfall-runoff models. The software MICA was adopted, in which the prior information about the parameters is updated to generate the parameter posterior distribution. The likelihood function adopted in MICA assumes that the residuals between the measured and modelled values have a normal distribution. This is a trait of many uncertainty/sensitivity procedures. This study compares the results from three different scenarios: (i) when normality of the residuals was checked but if they were not normal then nothing was done (unverified); (ii) normality assumption was checked, verified (using data transformations) and a weighting strategy was used that gives more importance to high flows; and (iii) normality assumption was checked and verified, but no weights were applied. The modelling implications of such scenarios were analysed in terms of model efficiency, sensitivity and uncertainty assessment. The overall results indicated that verifying the normality assumption required the models to fit a wider portion of the hydrograph, allowing a more detailed inspection of parameters and processes simulated in both models. Such an outcome provided important information about the advantages and limitations of the models' structure.

Evaluating Escherichia coli removal performance in stormwater biofilters: a preliminary modelling approach.

Stormwater biofilters are not currently optimised for pathogen removal since the behaviour of these pollutants within the stormwater biofilters is poorly understood. Modelling is a common way of optimising these systems, which also provides a better understanding of the major processes that govern the pathogen removal. This paper provides an overview of a laboratory-scale study that investigated how different design and operational conditions impact pathogen removal in the stormwater biofilters. These data were then used to develop a modelling tool that can be used to optimise the design and operation of the stormwater biofilters. The model uses continuous simulations where adsorption and desorption were dominant during wet weather periods and first order die-off kinetics were significant in dry periods between the wet weather events. Relatively high Nash Sutcliffe Efficiencies (>0.5) indicate that the calibrated model is in good agreement with observed data and the optimised model parameters were comparable with values reported in the literature. The model's sensitivity is highest towards the adsorption process parameter followed by the die-off and desorption rate parameters, which implies that adsorption is the governing process of the model. Vegetation is found to have an impact on the wet weather processes since the adsorption and desorption parameters vary significantly with the different plant configurations. The model is yet to be tested against field data and needs to be improved to represent the effect of some other biofilter design configurations, such as the inclusion of the submerged zone.

Zinc-sulphate-heptahydrate coated activated carbon for microbe removal from stormwater.

There is a need to develop effective stormwater filters for passive (without any addition of chemicals or energy) and effective removal of pathogens in order to mainstream stormwater harvesting. This study focuses on the development of coated granular activated carbon (GAC) filtration material in order to develop filters for effective removal of pathogens from urban stormwater. Several laboratory trials were performed to gauge the effectiveness of the filters, which use a mixture of the zinc-sulphate-heptahydrate coated GAC and sand, on the removal of Escherichia coli (E. coli) from semi-natural stormwater. On average, a 98% removal of the inflow concentration of E. coli was achieved. Furthermore, there was also an improvement of approximately 25% in the removal of phosphorous. However, it was found that the treated material was leaching zinc. It was important to determine whether the observed removal of E. coli was indirectly caused by the sampling methodology. The results showed that the inactivation of the E. coli in the collected sample was small compared with the inactivation which actually occurred within the filter. This provides much promise to the filter, but the presence of zinc in the outflow demonstrates the need for further investigation into the stabilisation of the coating process.

Performance of enviss™ stormwater filters: results of a laboratory trial.

An experimental study was undertaken by Monash University to develop and test enviss™ stormwater treatment and harvesting technologies - non-vegetated filtration systems with an extremely low footprint. This paper focuses on the water quality and hydraulic performance of two systems tested over a 'year' of operation in a Melbourne climate: (1) REUSE enviss™ filters, designed for stormwater harvesting systems for non-potable supply substitution, and (2) WSUD enviss™ filters, developed to treat urban stormwater prior to discharge to downstream systems. The presence of chlorine as a disinfection agent proved to be very efficient for the removal of microorganisms in REUSE enviss™ filters. WSUD enviss™ filters had the benefit of providing an elevated nutrient treatment performance, due to an extended depth of filter media. However, nutrient outflow concentrations (total nitrogen (TN) in particular) were found to increase during the testing period. Also, extended dry weather periods were found to have a detrimental effect on the treatment performance of almost all pollutants for both filters (nutrients, Escherichia coli and heavy metals). Although hydraulic conductivity results indicated two or three sediment trap replacements per year are required to maintain filtration rates, it is expected that the compressed loading rate schedule overestimated this maintenance frequency.

Evaluating Escherichia coli removal performance in stormwater biofilters: a laboratory-scale study.

Biofilters are common, low energy technologies used for the treatment of urban stormwater. While they have shown promising results for the removal of stormwater microorganisms, certain factors affect their performance. Hence, this study investigated the effects of particle-microbial interaction, inflow concentration, antecedent microbial levels and plant species on microbial removal capacity. A biofilter column study was set up to evaluate removal performance and a sequential filtration procedure was used to estimate microbial partitioning. The columns were dosed with different concentrations of free phase Escherichia coli only and E. coli mixed with stormwater sediment. Results indicate that the microbial removal is significantly affected by inflow concentration and antecedent microbial levels. Leaching was only observed when a relatively low inflow concentration event occurred within a short period after a very high inflow concentration event. Finally, Lomandra longifolia showed better removal compared with Carex appressa.

Intra-event variability of Escherichia coli and total suspended solids in urban stormwater runoff.

Sediment levels are important for environmental health risk assessments of surface water bodies, while faecal pollution can introduce significant public health risks for users of these systems. Urban stormwater is one of the largest sources of contaminants to surface waters, yet the fate and transport of these contaminants (especially those microbiological) have received little attention in the literature. Stormwater runoff from five urbanized catchments were monitored for pathogen indicator bacteria and total suspended solids in two developed countries. Multiple discrete samples were collected during each storm event, allowing an analysis of intra-event characteristics such as initial concentration, peak concentration, maximum rate of change, and relative confidence interval. The data suggest that a catchment's area influences pollutant characteristics, as larger catchments have more complex stormwater infrastructure and more variable pollutant sources. The variability of total suspended solids for many characteristics was similar to Escherichia coli, indicating that the variability of E. coli may not be substantially higher than that of other pollutants as initially speculated. Further, variations in E. coli appeared to be more commonly correlated to antecedent climate, while total suspended solids were more highly correlated to rainfall/runoff characteristics. This emphasizes the importance of climate on microbial persistence and die off in urban systems. Discrete intra-event concentrations of total suspended solids and, to a lesser extent E. coli, were correlated to flow, velocity, and rainfall intensity (adjusted by time of concentrations). Concentration changes were found to be best described by adjusted rainfall intensity, as shown by other researchers. This study has resulted in an increased understanding of the magnitude of intra-event variations of total suspended solids and E. coli and what physical and climatic parameters influence these variations.