Photon-gated foldaxane assembly/disassembly.

Integrating multiple anthracene motifs into aromatic oligoamide sequences gives rise to photoactive foldamers that can sequester a molecular thread forming helix-on-axle assemblies. Photoirradiation is shown to distort the helical host and drive dissociation of the supramolecular assembly and thread liberation as signalled by a photonic output, while thermal reversion regenerates the assembly.

Influence of Structural Properties of Oleic Acid-Capped CdSe/ZnS Quantum Dots in the Detection of Hg2+ Ions.

Oleic acid-capped CdSe/ZnS quantum dots (QDs) were used to investigate their photoluminescence (PL) response to Hg2+ ions as a function of the surface properties of QDs. Three distinctly-size CdSe/ZnS QDs were obtained by varying the molar ratio of shell precursors, which were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HR-TEM), Fourier-Transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), absorption spectroscopy, and time-resolved fluorescence spectroscopy. Results revealed the obtention of zinc blende nanocrystals with sizes ranging from 2.7 to 3.2 nm (± 0.5) and ZnS thickness between 0.3 and 1.0 monolayer (ML). The variation of the [S]/[Zn] molar ratio introduced chemical species that act as traps, affecting the PL properties differently. Depending on the thickness of the shell and chemical speciation on surface, Hg2+ ions could induce quenching or enhancement of PL. Detection of mercury ions was evaluated in terms of Stern-Volmer equation, where the limit of detection (LOD) for the PL quenching system was 11.2 nM, while for the PL enhancing systems were 8.98 nM and 10.7 nM. Results demonstrate the performance of oleic acid-capped CdSe/ZnS QDs to detect Hg2+ and their capacity to turn the PL on/off depending on surface properties.

Cyclometalated luminescent platinum(II) complexes of dissymmetrical 2,2':4',2''-terpyridine and its self-assembled dimer presenting Pt-Ag dative bonds.

A series of cyclometalated (N^C^N) Pt(II)-platinum complexes featuring a terpyridine ligand with a non-coordinating nitrogen atom and a Pt-C bond was synthesized. In the presence of Ag+, the bis(isonitrile)Pt(II) complex formed a remarkable self-assembled helicoidal dimer stabilized by coordination of Ag(I) and metallophilic Pt-Ag interactions. Its assembly was observed in the solid state and maintained in solution. All complexes show strong luminescence and multiple emitting states, which could be rationalized based on solid state X-ray structures and coordinating environment.

Ratiometric Luminescence Detection of Copper(I) by a Resonant System Comprising Two Antenna/Lanthanide Pairs.

Selective and sensitive detection of Cu(I) is an ongoing challenge due to its important role in biological systems, for example. Herein, we describe a photoluminescent molecular chemosensor integrating two lanthanide ions (Tb3+ and Eu3+) and respective tryptophan and naphthalene antennas onto a polypeptide backbone. The latter was structurally inspired from copper-regulating biomacromolecules in Gram-negative bacteria and was found to bind Cu+ effectively under pseudobiological conditions (log KCu+ = 9.7 ± 0.2). Ion regulated modulation of lanthanide luminescence in terms of intensity and long, millisecond lifetime offers perspectives in terms of ratiometric and time-gated detection of Cu+. The role of the bound ion in determining the photophysical properties is discussed with the aid of additional model compounds.

Light- and pH-regulated Water-soluble Pseudorotaxanes Comprising a Cucurbit[7]uril and a Flavylium-based Axle.

A linear double pyridinium-terminated thread comprising a central chalcone moiety is shown to provide two independent binding sites with similar affinity for cucurbit[7]uril (CB7) macrocycles in water as judged from NMR, UV-Visible and fluorescence spectroscopies. Association results in [2] and [3]pseudorotaxanes, which are both pH and photosensitive. Switching from the neutral chalcone to the cationic flavylium form upon irradiation at 365 nm under acidic conditions provided an enhanced CB7 association (K1:1 increases from 1.2×105  M-1 to 1.5×108  M-1 ), limiting spontaneous on-thread cucurbituril shuttling. This co-conformational change in the [2]pseudorotaxane is reversible in the dark with kobs =4.1×10-4  s-1 . Threading the flavylium moiety into CB7 leads to a dramatic increase in the fluorescence quantum yield, from 0.29 in the free axle to 0.97 in the [2]pseudorotaxane and 1.0 in the [3]pseudorotaxane.

Damming an electronic energy reservoir: ion-regulated electronic energy shuttling in a [2]rotaxane.

We demonstrate the first example of bidirectional reversible electronic energy transfer (REET) between the mechanically bonded components of a rotaxane. Our prototypical system was designed such that photoexcitation of a chromophore in the axle results in temporary storage of electronic energy in a quasi-isoenergetic "reservoir" chromophore in the macrocycle. Over time, the emissive state of the axle is repopulated from this reservoir, resulting in long-lived, delayed luminescence. Importantly, we show that cation binding in the cavity formed by the mechanical bond perturbs the axle chromophore energy levels, modulating the REET process, and ultimately providing a luminescence read-out of cation binding. Modulation of REET processes represents an unexplored mechanism in luminescent molecular sensor development.

Bioinspired Luminescent Europium-Based Probe Capable of Discrimination between Ag+ and Cu.

Due to their similar coordination properties, discrimination of Cu+ and Ag+ by water-soluble luminescent probes is challenging. We have synthesized LCC4Eu, an 18 amino acid cyclic peptide bearing a europium complex, which is able to bind one Cu+ or Ag+ ion by the side chains of two methionines, a histidine and a 3-(1-naphthyl)-l-alanine. In this system, the naphthyl moiety establishes a cation-π interaction with these cations. It also acts as an antenna for the sensitization of Eu3+ luminescence. Interestingly, when excited at 280 nm, LCC4Eu behaves as a turn-on probe for Ag+ (+150% Eu emission) and as a turn-off probe for Cu+ (-50% Eu3+ emission). Shifting the excitation wavelength to 305 nm makes the probe responsive to Ag+ (+380% Eu3+ emission) but not to Cu+ or other physiological cations. Thus, LCC4Eu is uniquely capable of discriminating Ag+ from Cu+. A detailed spectroscopic characterization based on steady-state and time-resolved measurements clearly demonstrates that Eu3+ sensitization relies on electronic energy transfer from the naphthalene triplet state to the Eu3+ excited states and that the cation-π interaction lowers the energy of this triplet state by 700 and 2400 cm-1 for Ag+ and Cu+, respectively. Spectroscopic data point to a modulation of the efficiency of the electronic energy transfer caused by the differential red shift of the naphthalene triplet, deciphering the differential luminescence response of LCC4Eu toward Ag+ and Cu+.

Alkylation of the α-amino C-H bonds of anilines photocatalyzed by a DMEDA-Cu-benzophenone complex: reaction scope and mechanistic studies.

The Cu(ii) complex 1 incorporating a BP chromophore is a highly active and chemoselective photocatalyst for the alkylation of α-amino C-H bonds of anilines. The reaction was shown to proceed with a broad substrate scope in the absence of additives. Extensive mechanistic studies were performed, in particular using transient absorption spectroscopy, and spectroscopic signatures of key intermediates were identified in the conditions of catalysis. Finally, the ability of 1 to act as a multitask catalyst was showcased by conducting multi-component CuAAC and olefin hydroalkylation reactions in one-pot.

Five-component, one-pot synthesis of an electroactive rotaxane comprising a bisferrocene macrocycle.

The templated clipping of a ferrocene-grafted isophthalic acid derivative to encircle a hydrogen-bonding axle through the reaction with 1,4-bis(aminomethyl)benzene is described. The constituent electroactive macrocycle of the resultant [2]rotaxane is a homologue of the versatile benchmark tetraamide variant developed by Leigh and co-workers. The relative templating effect of different hydrogen-bonding motifs in rotaxane and pseudorotaxane generation is compared, with yields varying from 0 to 41%. The electrochemical properties and single crystal X-ray structure of a doubly ferrocene-decorated [2]rotaxane are further reported.

A fluorous sodium l-prolinate derivative as low molecular weight gelator for perfluorocarbons.

We report the first study dealing with the self-assembly of an α-amino acid derivative in perfluorocarbons. Rheology, microscopy, and spectroscopy studies reveal that the fluorous sodium l-prolinate derivative 1 self-assembles in perfluorocarbons to form a three-dimensional network of left-handed nano-helices resulting in solvent gelation. Singlet oxygen lifetime measured in a gel of perfluorodecalin is about 1000 times longer than in pure water.

Photoreversible stretching of a BAPTA chelator marshalling Ca2+-binding in aqueous media.

Free calcium ion concentration is known to govern numerous biological processes and indeed calcium acts as an important biological secondary messenger for muscle contraction, neurotransmitter release, ion-channel gating, and exocytosis. As such, the development of molecules with the ability to instantaneously increase or diminish free calcium concentrations potentially allows greater control over certain biological functions. In order to permit remote regulation of Ca2+, a selective BAPTA-type synthetic receptor / host was integrated with a photoswitchable azobenzene motif, which upon photoirradiation would enhance (or diminish) the capacity to bind calcium upon acting on the conformation of the adjacent binding site, rendering it a stronger or weaker binder. Photoswitching was studied in pseudo-physiological conditions (pH 7.2, [KCl] = 100 mM) and dissociation constants for azobenzene cis- and trans-isomers have been determined (0.230 µM and 0.102 µM, respectively). Reversible photoliberation/uptake leading to a variation of free calcium concentration in solution was detected using a fluorescent Ca2+ chemosensor.

Photochromic rotaxanes and pseudorotaxanes.

Among stimulus-responsive molecular ring-on-thread rotaxanes and pseudorotaxanes, variants incorporating photochromic sub-units are attracting considerable attention as their properties and structure can be remotely and precisely controlled, additionally without producing chemical waste. The focus herein is on photoswitching-driven assembly/disassembly and modulation of properties resulting from light-activated isomerization or changes in electronic properties.

Molecular engineering of logic gate types by module rearrangement in 'Pourbaix Sensors': the effect of excited-state electric fields.

Two types of fluorescent logic gates are accessed from two different arrangements of the same modular components, one as an AND logic gate (1) and the other as a PASS 0 logic gate (2). The logic gates were designed with an 'electron-donor-spacer1-fluorophore-spacer2-receptor' format and demonstrated in 1 : 1 (v/v) methanol/water. The molecules consist of ferrocene as the electron donor, 4-aminonaphthalimide as the fluorophore and a tertiary alkylamine as the receptor. In the presence of high H+ and Fe3+ levels, regioisomers 1a and 1b switch 'on' as AND logic gates with fluorescence enhancement ratios of 16-fold and 10-fold, respectively, while regioisomers 2a and 2b are functionally dormant, exhibiting no fluorescence switching. The PASS 0 logic of 2a and 2b results from the transfer of an electron from the excited state fluorophore to the ferrocenium unit under oxidising conditions as predicted by DFT calculations. Time-resolved fluorescence spectroscopy provided lifetimes of 8.3 ns and 8.1 ns for 1a and 1b, respectively. The transient signal recovery rate of 1b is ∼10 ps while that of 2b is considerably longer on the nanosecond timescale. The divergent logic attributes of 1 and 2 highlight the importance of field effects and opens up a new approach for regulating logic-based molecules.

Designed Long-Lived Emission from CdSe Quantum Dots through Reversible Electronic Energy Transfer with a Surface-Bound Chromophore.

The size-tunable emission of luminescent quantum dots (QDs) makes them highly interesting for applications that range from bioimaging to optoelectronics. For the same applications, engineering their luminescence lifetime, in particular, making it longer, would be as important; however, no rational approach to reach this goal is available to date. We describe a strategy to prolong the emission lifetime of QDs through electronic energy shuttling to the triplet excited state of a surface-bound molecular chromophore. To implement this idea, we made CdSe QDs of different sizes and carried out self-assembly with a pyrene derivative. We observed that the conjugates exhibit delayed luminescence, with emission decays that are prolonged by more than 3 orders of magnitude (lifetimes up to 330 µs) compared to the parent CdSe QDs. The mechanism invokes unprecedented reversible quantum dot to organic chromophore electronic energy transfer.

2D and 3D surface photopatterning via laser-promoted homopolymerization of a perfluorophenyl azide-substituted BODIPY.

An innovative photopatterning process is described that allows, in a single laser-promoted operation, the covalent attachment of a molecule on a surface (2D patterning - xy dimensions) and its photopolymerization to grow micro-/nanostructures with spatial control in a third z-dimension. The surface patterning process, based on nitrene reactivity, was harnessed using the highly fluorescent azide-substituted boron difluoride dipyrromethene (BODIPY) 1 that was prepared in a single synthetic step from the parent pentafluorophenyl BODIPY on reacting with NaN3. Using the laser of a fluorescence microscope (375 nm or 532 nm) 1 could be grafted on adapted surfaces and then homopolymerised. In this study we show that using glass coverslips coated with PEG/high density alkyne groups (density of ∼1 × 1014 per cm2), the patterning process was much more spatially confined than when using PEG only coating. Varying the irradiation time (1 to 15 s) or laser power (0.14-3.53 µW) allowed variation of the amount of deposited BODIPY to afford, in the extreme case, pillars of a height up to 800 nm. AFM and MS studies revealed that the nano/microstructures were formed of particles of photopolymerized 1 having a mean diameter of ca. 30 nm. The emission spectra and fluorescence lifetimes for the patterned structures were measured, revealing a red-shift (from ∼560 nm up to 620 nm) of the maximum emission and a shortening (from ∼6 ns to 0.8 ns) of the fluorescence lifetimes in areas where the density of BODIPY is high. As an application of the patterning process, a figure formed of 136 dots/pillars was prepared. The confocal hyperspectral fluorescence image revealed that the figure is clearly resolved and constituted by highly photoluminescent red dots whose fluorescence intensities and emission color proved to be highly reproducible. SEM and AFM studies showed that the luminescent dots were pillars with a conical shape, an average height of 710 ± 28 nm and a FWHM of 400 ± 20 nm.

Photosensitizer localization in amphiphilic block copolymers controls photodynamic therapy efficacy.

Localization of the photosensitizer conjugation site in amphiphilic block copolymers is shown to have a great impact on photodynamic therapy efficiency. To this end, an asymmetric multifunctional derivative of the azadipyrromethene boron difluoride chelate (aza-BODIPY) was synthesized and inserted at specific locations in polypeptide-based rod-coil amphiphilic block copolymers. A study of the photophysical properties of the vesicle nanocarriers, obtained by self-assembly of these copolymers, as well as in vitro tests on two cancer cell lines were performed. This study aims at providing guidelines for the optimization of the synthetic design of therapeutic nanomedicines with minimal amounts of photosensitive molecules.

Synthetic water soluble di-/tritopic molecular receptors exhibiting Ca2+/Mg2+ exchange.

Structural integration of two synthetic water soluble receptors for Ca2+ and Mg2+, namely 1,2-bis(2-aminophenoxy)ethane-N,N,N',N'-tetraacetic acid (BAPTA) and o-aminophenol-N,N,O-triacetic acid (APTRA), respectively, gave novel di- and tritopic ionophores (1 and 2). As Mg2+ and Ca2+ cannot be simultaneously complexed by the receptors, allosteric control of complexation results. Potentiometric measurements established stepwise protonation constants and showed high affinity for Ca2+ (log K = 6.08 and 8.70 for 1 and 2, respectively) and an excellent selectivity over Mg2+ (log K = 3.70 and 5.60 for 1 and 2, respectively), which is compatible with magnesium-calcium ion exchange. While ion-exchange of a single Mg2+ for a single Ca2+ is possible in both 1 and 2, the simultaneous binding of two Mg2+ by 2 appears prohibitive for replacement of these two ions by a single Ca2+. Ion-binding and exchange was further rationalized by DFT calculations.

Polymersome Popping by Light-Induced Osmotic Shock under Temporal, Spatial, and Spectral Control.

The light-triggered, programmable rupture of cell-sized vesicles is described, with particular emphasis on self-assembled polymersome capsules. The mechanism involves a hypotonic osmotic imbalance created by the accumulation of photogenerated species inside the lumen, which cannot be compensated owing to the low water permeability of the membrane. This simple and versatile mechanism can be adapted to a wealth of hydrosoluble molecules, which are either able to generate reactive oxygen species or undergo photocleavage. Ultimately, in a multi-compartmentalized and cell-like system, the possibility to selectively burst polymersomes with high specificity and temporal precision and to consequently deliver small encapsulated vesicles (both polymersomes and liposomes) is demonstrated.

Remote Photoregulated Ring Gliding in a [2]Rotaxane via a Molecular Effector.

A molecular barbiturate messenger, which is reversibly released/captured by a photoswitchable artificial molecular receptor, is shown to act as an effector to control ring gliding on a distant hydrogen-bonding [2]rotaxane. Thus, light-driven chemical communication governing the operation of a remote molecular machine is demonstrated using an information-rich neutral molecule.

Photoinduced Electron Transfer and Hole Migration in Nanosized Helical Aromatic Oligoamide Foldamers.

A series of photoactive triads have been synthesized and investigated in order to elucidate photoinduced electron transfer and hole migration mechanism across nanosized, rigid helical foldamers. The triads are comprised of a central helical oligoamide foldamer bridge with 9, 14, 18, 19, or 34 8-amino-2-quinolinecarboxylic acid repeat units, and of two chromophores, an N-terminal oligo(para-phenylenevinylene) electron donor and a C-terminal perylene bis-imide electron acceptor. Time-resolved fluorescence and transient absorption spectroscopic studies showed that, following photoexcitation of the electron acceptor, fast electron transfer occurs initially from the oligoquinoline bridge to the acceptor chromophore on the picosecond time scale. The oligo(para-phenylenevinylene) electron donor is oxidized after a time delay during which the hole migrates across the foldamer from the acceptor to the donor. The charge separated state that is finally generated was found to be remarkably long-lived (>80 µs). While the initial charge injection rate is largely invariant for all foldamer lengths (ca. 60 ps), the subsequent hole transfer to the donor varies from 1 × 109 s-1 for the longest sequence to 17 × 109 s-1 for the shortest. In all cases, charge transfer is very fast considering the foldamer length. Detailed analysis of the process in different media and at varying temperatures is consistent with a hopping mechanism of hole transport through the foldamer helix, with individual hops occurring on the subpicosecond time scale (kET = 2.5 × 1012 s-1 in CH2Cl2). This work demonstrates the possibility of fast long-range hole transfer over 300 Å (through bonds) across a synthetic modular bridge, an achievement that had been previously observed principally with DNA structures.