Advertising and general dental practice: how compliant are practice websites in Australia with legal requirements?

BACKGROUND: The Australian Health Practitioner Regulation Agency (AHPRA) requires general dental practitioners (GDPs) to agree to regulatory advertising guidelines on initial registration and annual renewal. The aim of this study was to determine the compliance of GDPs websites to these requirements. METHODS: A representative sample of GDPs websites from each state and territory in Australia was based on the total AHPRA registrant distribution. Assessment of compliance was used across five domains consisting of 17 criteria related to AHPRA's advertising of regulated health services guidelines, as well as section 133 of the National Law. Inter-rater reliability was estimated using Fleiss's Kappa. RESULTS: One hundred and ninety-two GDPs websites were reviewed with 85% non-compliant with at least one of the legal and regulatory requirements relating to advertising. Of these websites, 52% displayed false and misleading information, 12.8% had offers and inducement without clear terms and conditions, 11.5% used written testimonials, 33.9% created unrealistic expectation of benefit and 39.6% encouraged indiscriminate and unnecessary use of health services. CONCLUSIONS: More than 85% of GDP websites in Australia did not comply with legal and regulatory requirements related to advertising. A multi-stakeholder approach involving AHPRA, professional dental bodies and dental registrants is necessary to improve compliance.

Eruption disturbances in the mixed dentition: orthodontic considerations for primary dental care.

The primary dental care clinician is in a prime position to identify deviations from normal dental development. Disturbances can affect any new erupting tooth. The objective of this narrative review is to describe several situations in which eruption disturbances can arise during the mixed dentition. It will provide an overview of the orthodontic considerations of these disturbances in addition to key summary points on interceptive management, based on the best available evidence.

Effectiveness of tongue-tie assessment tools in diagnosing and fulfilling lingual frenectomy criteria: a systematic review.

It is unclear how effective tongue-tie classification assessment tools are in diagnosing symptomatic tongue-tie and fulfilling lingual frenectomy criteria. The purpose of this systematic review is to determine and evaluate any association between tongue-tie severity, as measured by pre-treatment assessment tools, and post-operative outcome following tongue-tie division. PubMed, EMBASE, and the Cochrane search engines were used to retrieve articles published between 1947 and 2021. Included studies consisted of patients with symptomatic tongue-tie, assessment by either the Coryllos, Kotlow, or Hazelbaker Assessment Tool for Lingual Frenulum Function (HATLFF) classification tool, and tongue-tie division. A total of 205 abstracts were identified; 31 studies met the criteria for a full-text review, of which, only 14 studies met the criteria for data extraction and analysis. Six studies used the HATLFF, 2 studies used the Kotlow, 5 studies used the Coryllos, and 1 study used a combination of both Kotlow and Coryllos methods. Significant heterogeneity was evident across all studies. No statistical correlation between the two variables could be determined. Although tongue-tie division procedures appear to provide benefits in breastfeeding and speech, there are no data to suggest a statistically significant association between the severity of tongue-tie, and the correct identification of patients who would benefit from tongue-tie division. © 2022 Australian Dental Association.

The quality and readability of online molar incisor hypomineralization patient education materials: a systematic analysis.

BACKGROUND: Molar incisor hypomineralization (MIH) is estimated to affect 14% of children worldwide. It is crucial that patients and their families have access to easily comprehensible and reliable MIH-relevant information. This study aims to determine the quality, reliability and readability of online patient education materials about MIH. METHODS: A systematic search strategy was adopted. Five validated tools were used to assess the content of the 21 websites that satisfied inclusion/exclusion criteria. Data analyses were applied via GraphPad Prism software version 9 (GraphPad Software, San Diego, CA, USA). RESULTS: Five (23.8%) websites only satisfied the criteria for understandability and two (9.5%) websites satisfied the criteria for actionability using the Patient Education Materials Assessment Tool (PEMAT). No website contained the Health on the Net (HON)Code Seal and the mean (SD) Journal of the American Medical Association number of benchmarks per website was 1.33/4 (1.02). All websites failed to reach recommended minimum readability levels. Higher PEMAT scores were associated with 'easier' readability. CONCLUSIONS: Online patient education materials related to MIH are lacking in quality and reliability, and are too difficult for most to read easily. The authors of MIH-related online content should consider reference to quality of information tools when developing patient education materials.

An assessment of the treatment information contained within the websites of direct-to-consumer orthodontic aligner providers.

BACKGROUND: The use of direct-to-consumer (DTC) orthodontic aligners is growing. The purpose of this study was to evaluate the quality of information contained within the websites of DTC orthodontic aligner providers. METHODS: Websites that satisfied inclusion criteria were assessed for the presence of specific treatment-related features. Four validated quality of information instruments and readability tools were used to evaluate the content of the websites. Descriptive statistical analyses and intra-examiner reliability tests were performed. RESULTS: Twenty-one websites were evaluated. Few websites referred to the need for pre-treatment dental health (38.1%) and indefinite post-treatment retention (23.8%). Most websites (95.2%) were categorized as either 'poor' or 'very poor' according to their DISCERN scores. DISCERN items regarding information bias and treatment risks scored particularly poorly. Cohen's kappa intra-examiner reliability testing for DISCERN scores was 0.81-0.89. Three websites honoured two out of the four Journal of the American Medical Association benchmarks and 18 honoured one benchmark only. The readability scores indicated 'difficult to read' content. CONCLUSIONS: The quality of information contained within the websites of DTC orthodontic aligner providers is poor. Patient consent for DTC aligner treatment based solely on the information contained within the websites is likely to be invalid.

Web-based information on orthodontic clear aligners: a qualitative and readability assessment.

BACKGROUND: Data regarding the quality of information (QOI) related to orthodontic clear aligners (OCAs) on the internet are lacking. The aim of the present investigation was to assess the quality and readability of websites providing information regarding OCAs to prospective patients. METHODS: Three search terms were entered separately into three search engines. Four validated QOI instruments were used to determine the QOI and readability of the content contained within the websites that satisfied predetermined criteria. Descriptive statistical analyses and intrarater testing for DISCERN scores were calculated. RESULTS: Forty-nine websites satisfied inclusion/exclusion criteria. General dentists (44.9%) and specialist orthodontists (26.5%) authored the majority of websites. One website contained the Health on the Net (HON) code seal. Cohen's kappa for DISCERN scores was good (0.87). The overall mean (SD) DISCERN score was 38.55 (8.00)/80, range 26-60. The websites authored by 'Direct-to-consumer' OCA providers recorded the lowest DISCERN mean score (33/80). One website contained all four Journal of the American Medical Association (JAMA) benchmarks. The mean (SD) Flesch Reading Ease score was 53.92 (9.08), range 36-82.5. CONCLUSIONS: The QOI of the website content related to OCAs is poor and is 'fairly difficult' to read. Website authors should consider using QOI instruments and readability tools to enable the delivery of evidence-based and easily readable information regarding OCAs to prospective patients.

Soil bacteria Pseudomonas putida and Alcaligenes xylosoxidans subsp. denitrificans inactivate triclosan in liquid and solid substrates.

Triclosan is a broad-spectrum antimicrobial agent that has been incorporated into many household and medical products. Bacteria with high levels of triclosan resistance were isolated from compost, water, and soil samples. Two of these bacteria, Pseudomonas putida TriRY and Alcaligenes xylosoxidans subsp. denitrificans TR1, were able to use triclosan as a sole carbon source and clear particulate triclosan from agar. A decrease in triclosan concentration was measured by HPLC within 6 h of inoculation with strain TriRY and 24 h with strain TR1. Bioassays demonstrated that triclosan was inactivated in liquid cultures and/or embedded in plastic by the growth of strain TriRY and strain TR1, permitting the growth of triclosan-sensitive bacteria.

CFP, the putative cercosporin transporter of Cercospora kikuchii, is required for wild type cercosporin production, resistance, and virulence on soybean.

Many species of the fungal genus Cercospora, including the soybean pathogen C. kikuchii, produce the phytotoxic polyketide cercosporin. Cercosporin production is induced by light. Previously, we identified several cDNA clones of mRNA transcripts that exhibited light-enhanced accumulation in C. kikuchii. Targeted disruption of the genomic copy of one of these, now designated CFP (cercosporin facilitator protein), results in a drastic reduction in cercosporin production, greatly reduced virulence of the fungus to soybean, and increased sensitivity to exogenous cercosporin. Sequence analysis of CFP reveals an 1,821-bp open reading frame encoding a 65.4-kDa protein similar to several members of the major facilitator superfamily (MFS) of integral membrane transporter proteins known to confer resistance to various antibiotics and toxins in fungi and bacteria. We propose that CFP encodes a cercosporin transporter that contributes resistance to cercosporin by actively exporting cercosporin, thus maintaining low cellular concentrations of the toxin.

Production and rheological properties of a succinoglycan from Pseudomonas sp. 31260 grown on wood hydrolysates.

Pseudomonas sp. ATCC 31260 produced substantial amounts of anionic extracellular polysaccharide (EPS) from a mineral acid hydrolysate of wood, prepared using the "Tennessee Valley Authority" process. Partially purified EPS production approached 16.5 g/L (as hexadecyltrimethylammonium bromide precipitate) when the pH of the hydrolysate was initially adjusted to 7.5 and amended with 0.05% each of peptone and yeast extract. This EPS, now characterized as a succinoglycan, is composed of glucose, galactose, succinate, pyruvate, and acetate. Solutions of this EPS are pseudoplastic, and under specified conditions, are rheologically comparable with commercially available xanthan.

Transformation of the Fungal Soybean Pathogen Cercospora kikuchii with the Selectable Marker bar.

An improved transformation protocol, utilizing selection for resistance to the herbicide bialaphos, has been developed for the plant pathogenic fungus Cercospora kikuchii. Stable, bialaphos-resistant transformants are recovered at frequencies eight times higher than those achieved with the previous system that was based on selection for benomyl resistance. In addition to C. kikuchii, this improved method can also be used to transform other species of Cercospora.

Optimization of Novel Extracellular Polysaccharide Production by an Enterobacter sp, on Wood Hydrolysates.

An environmental isolate identified as Enterobacter cloacae has been found to produce a highly viscous, anionic extracellular polysaccharide (EPS) from a weak mineral acid hydrolysate of hardwood. Production of this EPS has been optimized on the hydrolysate (initial pH, 6.3; NH(4)Cl amendment, 0.1%) so that crude yields approaching 9.83 g/liter were obtained. Although this EPS is polydisperse, its molecular mass as determined by gel exclusion chromatography centers at approximately 1,700 kDa. Solutions of this EPS have been examined rheologically under a variety of conditions and compare favorably with both xanthan and alginate.