Development of a water-soluble fluorescent Al3+ probe based on phenylsulfonyl-2-pyrone in biological systems.

BACKGROUND: Al exists naturally in the environment and is an important component in acidic soils, which harm almost all plants. Furthermore, Al is widely used in food additives, cosmetics, and medicines, resulting in living organisms ingesting traces of Al orally or dermally every day. Accordingly, Al accumulates in the body, which can cause negative bioeffects and diseases, and this concern is gaining increasing attention. Therefore, to detect and track Al in the environment and in living organisms, the development of novel Al-selective probes that are water-soluble and exhibit fluorescence at long wavelengths is necessary. RESULTS: In this study, an Al3+-selective fluorescent probe PSP based on a novel pyrone molecule was synthesized and characterized to detect and track Al in biological systems. PSP exhibited fluorescence enhancement at 580 nm in the presence of Al3+ in aqueous media. Binding analysis using Job's plot and structural analysis using 1H NMR showed that PSP formed a 1:1 complex with Al3+ at the two carbonyl groups of the dimethyl malonate of the pyrone ring. Upon testing in biological systems, PSP showed good cell membrane permeability, detected intracellular Al3+ in human breast cancer cells (MDA-MB-231), and successfully imaged accumulated Al3+ in Microcystis aeruginosa and the larvae of Rheocricotopus species. SIGNIFICANCE: The novel Al3+-selective fluorescent probe PSP is highly effective and is expected to aid in elucidating the role of Al3+ in the environment and living organisms.

Cytogenotoxicity of raw and treated dairy manure slurry by two-stage chemical and electrocoagulation: An application of the Allium cepa bioassay.

Livestock farming is an essential agricultural practice. However, the improper management of livestock wastes and discharge of untreated or partially treated livestock manure slurry poses significant environmental problems. In this study, we aimed to compare the cytogenotoxic potential of untreated and treated dairy manure slurry treated with a two-stage chemical and electrocoagulation (EC) using the Allium cepa bioassay. The A. cepa bioassay is a well-established standard tool for assessing the cytogenotoxic effects of environmental contaminants, especially those that are occurred as complex contaminant mixtures. The dairy manure slurry was subjected to chemical treatment utilizing polyaluminum chloride (PAC) and cationic polyacrylamide (CPAM) at optimized conditions, followed by EC utilizing either aluminum (Al) or steel anodes. The treated and untreated samples were then evaluated for their potential cytogenotoxicty using the A. cepa bioassay, by measuring the nuclear abnormalities (NAs) and chromosomal aberrations (CAs), along with the mitotic indices (MIs). Our findings revealed a significant reduction in cytogenotoxic indicators in the treated liquid fraction compared to the untreated dairy manure slurry. Specifically, the frequency of total NAs showed a significant reduction from 154 ‰ to 37 ‰ when the dairy manure slurry was treated with chemical coagulation followed by EC utilizing an Al anode. Moreover, the MI exhibited a significant improvement from 7 ‰ to 123 ‰, suggesting the mitigation of toxic effects. These results collectively demonstrate the effectiveness of the two-stage chemical and EC treatment under optimal conditions in treating diary manure slurry while reducing its cytogenotoxicity for living systems. The A. cepa bioassay proved to be a sensitive and reliable method for assessing the toxicity of the treated samples. The efficient solid-liquid separation and the reduction of toxicity in the liquid fraction for biological systems achieved through this treatment process highlight its potential for sustainable management of livestock waste and the preservation of water quality. Nevertheless, further studies are required to assess the toxicity of solid fraction.

Response surface optimization of chemical coagulation for solid-liquid separation of dairy manure slurry through Box-Behnken design with desirability function.

Discharging livestock manure slurry without proper treatment causes various environmental and sociological problems. Chemical coagulation is a widely used and easily applicable method for treating such wastewater. However, the technique requires optimization to enhance coagulation efficiency while minimizing chemical usage. In this study, we propose an efficient, low-cost, and environmentally safe chemical coagulation method for solid-liquid separation of dairy manure slurry. Experiments were conducted in laboratory jar tests using dairy manure slurry to investigate the impact of coagulants, specifically polyaluminum chloride (PAC) and cationic polyacrylamide (CPAM), as well as pH, on the process of solid-liquid separation. Preliminary ranges of PAC, CPAM, and pH were estimated through single-factor experiments. Coagulation optimization and modeling were performed using the response surface methodology (RSM) with the Box-Behnken design (BBD), wherein the desired goal of each parameter was set to maximize solid-liquid separation efficiency while reducing chemical dosage to maintain residual aluminum (Al) concentrations below water quality standards. Numerical optimization predicted that the optimal dosages were 75 mg/L of PAC and 35 mg/L of CPAM at pH 7. Under these conditions, removal efficiencies of 99% for turbidity and 97% for chemical oxygen demand (COD) were achieved, with a minimal residual Al concentration of 0.045 mg/L. Positive zeta potential values in the treated water confirmed complete separation of negatively charged solids in the dairy manure slurry. The response values predicted by BBD aligned with the experimental results, and the analysis of variance (ANOVA) demonstrated the predictability and accuracy of the response models. Consequently, this study highlights the practical application of RSM with BBD in optimizing chemical coagulation using PAC and CPAM to achieve efficient solid-liquid separation in livestock wastewater while maintaining low residual Al concentrations.