Harvesting Enhanced Blue Energy in Charged Nanochannels Using Semidiluted Polyelectrolyte Solution.

Blue energy generation in nanochannels based on salinity gradients is currently the most promising method in the area of nonconventional energy production. We used a semidiluted pure sodium carboxymethylcellulose (NaCMC)-KCl aqueous solution to study the characteristics of blue energy generation within a charged nanochannel. We solve the corresponding equations for ionic transport using a numerical technique based on the finite element method. Our analysis focused on the electric double layer (EDL) potential field, open circuit current, diffuse potential, electric conductance, maximum generated pore power, and maximum energy conversion efficiency by varying concentrations of the salt in the left-side reservoir and the bulk polyelectrolyte. The results indicate that as the polyelectrolyte concentration increases, the extent of EDL overlap considerably reduces. With an increase in polyelectrolyte concentration, the open circuit current increases, while the diffuse potential reduces. It was observed that both electrical conductance and maximal pore power improve considerably with higher polyelectrolyte concentrations. Interestingly, our modeling framework demonstrates a power density substantially higher (up to 16.31 W/m2) than earlier configurations and surpasses the established commercial limit (5 W/m2). Furthermore, our findings reveal that the reservoir salt concentration significantly affects the rate of decline in the maximum energy conversion efficiency as the polyelectrolyte concentration increases. The research paves the way for the development of high-power-density devices with several practical applications.

Unveiling nutrient flow-mediated stress in plant roots using an on-chip phytofluidic device.

The initial emergence of the primary root from a germinating seed is a pivotal phase that influences a plant's survival. Abiotic factors such as pH, nutrient availability, and soil composition significantly affect root morphology and architecture. Of particular interest is the impact of nutrient flow on thigmomorphogenesis, a response to mechanical stimulation in early root growth, which remains largely unexplored. This study explores the intricate factors influencing early root system development, with a focus on the cooperative correlation between nutrient uptake and its flow dynamics. Using a physiologically as well as ecologically relevant, portable, and cost-effective microfluidic system for the controlled fluid environments offering hydraulic conductivity comparable to that of the soil, this study analyzes the interplay between nutrient flow and root growth post-germination. Emphasizing the relationship between root growth and nitrogen uptake, the findings reveal that nutrient flow significantly influences early root morphology, leading to increased length and improved nutrient uptake, varying with the flow rate. The experimental findings are supported by mechanical and plant stress-related fluid flow-root interaction simulations and quantitative determination of nitrogen uptake using the total Kjeldahl nitrogen (TKN) method. The microfluidic approach offers novel insights into plant root dynamics under controlled flow conditions, filling a critical research gap. By providing a high-resolution platform, this study contributes to the understanding of how fluid-flow-assisted nutrient uptake and pressure affect root cell behavior, which, in turn, induces mechanical stress leading to thigmomorphogenesis. The findings hold implications for comprehending root responses to changing environmental conditions, paving the way for innovative agricultural and environmental management strategies.

Maximizing blue energy: the role of ion partitioning in nanochannel systems.

This study describes a numerical analysis on blue energy generation using a charged nanochannel with an integrated pH-sensitive polyelectrolyte layer (PEL), considering ion partitioning effects due to permittivity differences. The mathematical model for ionic and fluidic transport is solved using the finite element method, and the model validation is performed against existing theoretical and experimental results. The study investigates the influence of electrolyte concentration, permittivity ratio, and salt types (KCl, BeCl2, AlCl3) on the energy conversion process. The findings illustrate the substantial role of ion partitioning in modulating ionic concentration and potential fields, thereby affecting current profiles and energy conversion efficiencies. Remarkably, overlooking ion partitioning leads to significant overestimations of power density, highlighting the necessity of this consideration for accurate device performance predictions. This work introduces a promising configuration that achieves higher power densities, paving the way for the next generation of efficient energy-harvesting devices. The findings offer valuable insights into the development of state-of-the-art blue energy harvesting nanofluidic devices, advancing sustainable energy production.

AC Electrothermal Effect Promotes Enhanced Solute Mixing in a Wavy Microchannel.

For liquids used in biological applications, a smaller diffusion coefficient results in a longer mixing time. We discuss, in this endeavor, the promising potential of the AC electrothermal (ACET) effect toward modulating enhanced mixing of electrolytic liquids with higher convective strength in a novel wavy micromixer. To this end, we develop a modeling framework and numerically solve the pertinent transport equations in a three-dimensional (3D) configuration numerically. By benchmarking the developed modeling framework with the experimental results available in this paradigm, we aptly demonstrate the maximum temperature rise, flow topology, species concentration field, and mixing efficiency in the proposed configuration for a set of parameters pertinent to this analysis. We find that the maximum temperature increase in the wavy micromixer, owing to the electrothermal effect, is less than 10 K even for the higher strength of the applied voltage, implying nondegradation of biological substances within the liquid sample. We report that the formation of significant lateral flow closer to the electrodes leads to a highly three-dimensional ACET flow field, which has a significant impact on the mixing efficiency for the range of diffusive Peclet numbers considered. We also report that the wave amplitude of the mixer, when intervening with the diffusive Peclet number, strongly impacts the mixing efficiency. As witnessed in this endeavor, for the smaller diffusive Peclet number, the mixing efficiency increases with amplitude, while the effect becomes the opposite for the higher Peclet number. The results of this study seem to provide an adequate basis for the design of a novel micromixer intended for enhanced solute mixing in realistic microfluidic applications.

Salinity Gradient-Induced Power Generation in Nanochannels: The Role of pH-Sensitive Polyelectrolyte Layers.

By varying the pH values (pHR) and types of salt solution, we investigate the salinity gradient-induced electrical and mechanical flow energies inside a reservoir-connected charged nanochannel with a grafted pH-sensitive polyelectrolyte layer (PEL) on the inner surfaces. The aqueous solutions of KCl, LiCl, BaCl2, BeCl2, AlCl3, and Co(en)3Cl3 salts are used as the working fluid in the current investigation. We examine the associated ionic transport and flow field, aiming to understand the underlying physics behind the generation of electrical and hydraulic energy through alterations in pHR and types of salt solution. Our results reveal that the PEL space charge density decreases with increasing pHR at lower values, while it remains almost insensitive to higher pHR values. The electrical conductance and maximum pore power of the Co(en)3Cl3 solution are significantly higher compared to salts with monovalent and divalent cations. Furthermore, the magnitude of these two parameters decreases with lower pHR and becomes insensitive to higher pHR values. The results illustrate that the maximum electrical energy conversion efficiency enhances with pHR, reaching its highest level for the Co(en)3Cl3 solution. We expect that the findings of the current work will have a significant bearing on the design and development of a state-of-the-art salinity gradient-based energy convertor as a potential candidate for renewable energy sources.

Vortex-assisted electroosmotic mixing of Carreau fluid in a microchannel.

Pertaining to the mixing of the non-Newtonian Carreau fluid under electrokinetic actuation inside a plane microchannel, we propose a new design of micromixer that involves inserting a two-part cylinder bearing zeta potential of the same sign but different magnitude in the upstream and downstream directions. We numerically solve the transport equations to predict the underlying mixing characteristics. We demonstrate that a substantial momentum difference between the microchannel's plane wall and cylinder leads to the development of a vortex in the flow pathway, which in turn, enhances mixing substantially. As shown, for a fluid having a highly shear-thinning nature, the vortex-assisted convection mixing strength increases with diffusivity of the candidate fluids. Moreover, it is shown that for the higher shear-thinning nature of the candidate fluid, an increase in cylinder radius enhances mixing efficiency and flow rate simultaneously, resulting in a "quick and efficient" mixing condition. Additionally, the fluid rheology significantly alters the kinetics of shear-induced binary aggregation. Our findings show that the shear-induced aggregation characteristic time sharply increases with increasing shear-thinning behavior of the fluid.

Influence of viscoelectric effect on diffusioosmotic transport in nanochannel.

We have investigated the role of viscoelectric effect on diffusioosmotic flow (DOF) through a nanochannel connected with two reservoirs. The transport equations governing the flow dynamics are solved numerically using the finite element technique. We have extensively analyzed the variation of induced field due to electric double layer (EDL) phenomenon, relative viscosity as modulated by the viscoelectric effect as well as reservoir's concentration difference, and their eventual impact on the underlying flow characteristics. It is revealed that the induced electric field in the EDL enhances fluid viscosity substantially near the charged wall at a higher concentration. We have shown that neglecting viscoelectric effect in the paradigm of diffusioosmotic transport overestimates the net throughput, particularly at a higher concentration difference. Furthermore, we show that pertaining to chemiosmosis dominated regime, the average flow velocity modifies with the increase in concentration difference up to a critical value. In comparison, the rise in the strength of resistive electroosmotic actuation by the accumulation of anions in the upstream reservoir reduces the average flow velocity at a higher concentration difference. We have reported a reduction in critical concentration with the increase in viscoelectric effect. The inferences of this analysis are deemed pertinent to reveal the bearing of viscoelectric effect as a flow control mechanism pertaining to DOF at nanoscale.

Numerical study of the vortex-induced electroosmotic mixing of non-Newtonian biofluids in a nonuniformly charged wavy microchannel: Effect of finite ion size.

We propose a micromixer for obtaining better efficiency of vortex induced electroosmotic mixing of non-Newtonian bio-fluids at a relatively higher flow rate, which finds relevance in many biomedical and biological applications. To represent the rheology of non-Newtonian fluid, we consider the Carreau model in this study, while the applied electric field drives the constituent components in the micromixer. We show that the spatial variation of the applied field, triggered by the topological change of the bounding surfaces, upon interacting with the non-uniform surface potential gives rise to efficient mixing as realized by the formation of vortices in the proposed micromixer. Also, we show that the phase-lag between surface potential leads to the formation of asymmetric vortices. This behavior offers better mixing performance following the appearance of undulation on the flow pattern. Finally, we establish that the assumption of a point charge in the paradigm of electroosmotic mixing, which is not realistic as well, under-predicts the mixing efficiency at higher amplitude of the non-uniform zeta potential. The inferences of the present analysis may guide as a design tool for micromixer where rheological properties of the fluid and flow actuation parameters can be simultaneously tuned to obtain phenomenal enhancement in mixing efficiency.