RESUMEN
Exposure information is a critical element in various regulatory and non-regulatory frameworks in Europe and elsewhere. Exposure science supports to ensure safe environments, reduce human health risks, and foster a sustainable future. However, increasing diversity in regulations and the lack of a professional identity as exposure scientists currently hamper developing the field and uptake into European policy. In response, we discuss trends, and identify three key needs for advancing and harmonizing exposure science and its application in Europe. We provide overarching building blocks and define six long-term activities to address the identified key needs, and to iteratively improve guidelines, tools, data, and education. More specifically, we propose creating European networks to maximize synergies with adjacent fields and identify funding opportunities, building common exposure assessment approaches across regulations, providing tiered education and training programmes, developing an aligned and integrated exposure assessment framework, offering best practices guidance, and launching an exposure information exchange platform. Dedicated working groups will further specify these activities in a consistent action plan. Together, these elements form the foundation for establishing goals and an action roadmap for successfully developing and implementing a 'European Exposure Science Strategy' 2020-2030, which is aligned with advances in science and technology.
Asunto(s)
Ciencia , Europa (Continente) , HumanosRESUMEN
A series of laboratory simulations were conducted in order to determine the airborne protection that might be afforded by different combinations of workplace exposure controls typically encountered when handling volatile solvents (e.g. solvent transfer). These conditions, referred to as risk management measures (RMMs) under the Registration, Evaluation and Authorisation of Chemicals Regulation (REACH), are typically described using standard phrases in safety data sheets [and specifically those of the European Phrase Catalogue (EUPhraC)]. Ethanol was used as a model compound and its emissions were monitored continuously with a portable IR spectrometer at 3000 cm-1. The average emission reduction performance of the investigated RMMs (e.g. containment, extract ventilation, drum pump) exceeded 90%. They present suitable ways to reduce airborne solvent exposure in a workplace and confirmed the initial expectations derived at by the European Solvents Industry Group (ESIG) and the European Centre For Ecotoxicology and toxicology of Chemicals (ECETOC) Targeted Risk Assessment (TRA) model.
Asunto(s)
Contención de Riesgos Biológicos/métodos , Exposición Profesional/prevención & control , Gestión de Riesgos/métodos , Solventes/análisis , Ventilación/métodos , Ecotoxicología , Etanol/análisis , Humanos , Modelos Biológicos , Exposición Profesional/análisis , Medición de RiesgoRESUMEN
Chronic obstructive pulmonary disease (COPD) is a chronic lung disease that is thought to affect over one million people in Great Britain. The main factor contributing to the development of COPD is tobacco smoke. This paper presents a microsimulation model for the development of COPD, incorporating population dynamics and trends in smoking. The model simulates a population longitudinally throughout their lifetimes, providing projections of future COPD prevalence and evaluation of the effects of changes in risk factor prevalence such as smoking. Sensitivity analysis provides information on the most influential model parameters. The model-predicted prevalence of COPD in 2040 was 17% in males over the age of 35 years (13% amongst non-smokers and 22% amongst smokers), and a modest decline over the next 25 years due to recent trends in smoking rates. The simulation model provides us with valuable information on current and future trends in COPD in Great Britain. It was developed primarily to enable easy extension to evaluate the effects of occupational and environmental exposures on lung function and the prevalence of COPD and to allow evaluation of interventions, such as introducing health surveillance or policy changes. As longitudinal studies for investigating COPD are difficult due to the lengthy follow-up time required and the potentially large number of drop-outs, we anticipate that the model will provide a valuable tool for health impact assessment. An extended model for occupational exposures is under development and will be presented in a subsequent paper.
Asunto(s)
Enfermedad Pulmonar Obstructiva Crónica/epidemiología , Adulto , Distribución por Edad , Anciano , Progresión de la Enfermedad , Exposición a Riesgos Ambientales/efectos adversos , Exposición a Riesgos Ambientales/estadística & datos numéricos , Femenino , Volumen Espiratorio Forzado/fisiología , Evaluación del Impacto en la Salud , Humanos , Masculino , Persona de Mediana Edad , Modelos Biológicos , Exposición Profesional/efectos adversos , Exposición Profesional/estadística & datos numéricos , Prevalencia , Enfermedad Pulmonar Obstructiva Crónica/fisiopatología , Factores de Riesgo , Distribución por Sexo , Fumar/epidemiología , Reino Unido/epidemiología , Capacidad Vital/fisiologíaRESUMEN
There is little evidence with respect to the effectiveness of intervention programs that focus on the reduction of occupational quartz exposure in the construction industry. This article evaluates the effectiveness of a multidimensional intervention which was aimed at reducing occupational quartz exposure among construction workers by increasing the use of technical control measures. Eight companies participating in the cluster randomized controlled trial were randomly allocated to the intervention (four companies) or control condition (four companies). The multidimensional intervention included engineering, organizational, and behavioural elements at both organizational and individual level. Full-shift personal quartz exposure measurements and detailed observations were conducted before and after the intervention among bricklayers, carpenters, concrete drillers, demolishers, and tuck pointers (n = 282). About 59% of these workers measured at baseline were reassessed during follow-up. Bayesian hierarchical models were used to evaluate the intervention effect on exposure levels. Concrete drillers in the intervention group used technical control measures, particularly water suppression, for a significantly greater proportion of the time spent on abrasive tasks during follow-up compared to baseline (93 versus 62%; P < 0.05). A similar effect, although not statistically significant, was observed among demolishers. A substantial overall reduction in quartz exposure (73 versus 40% in the intervention and control group respectively; P < 0.001) was observed for concrete drillers, demolishers, and tuck pointers. The decrease in exposure in the intervention group compared to controls was significantly larger for demolishers and tuck pointers, but not for concrete drillers. The observed effect could at least partly be explained by the introduced interventions; the statistically significant increased use of control measures among concrete drillers explains the observed effect to some extent in this job category only. Sensitivity analyses indicated that the observed decrease in exposure may also partly be attributable to changes in work location and abrasiveness of the tasks performed. Despite the difficulties in assessing the exact magnitude of the intervention, this study showed that the structured intervention approach at least partly contributed to a substantial reduction in quartz exposure among high exposed construction workers.
Asunto(s)
Industria de la Construcción , Exposición Profesional/prevención & control , Cuarzo/análisis , Adulto , Teorema de Bayes , Materiales de Construcción , Polvo/análisis , Monitoreo del Ambiente/métodos , Humanos , Exposición por Inhalación/análisis , Exposición Profesional/análisis , Lugar de TrabajoRESUMEN
OBJECTIVES: Evaluate the process of an intervention in the construction industry to reduce quartz exposure. METHODS: In a cluster randomized controlled trial, data on seven process aspects (ie, recruitment, reach, dose delivered, dose received, fidelity, satisfaction, and context) were quantitatively collected on manager and worker levels. RESULTS: Dose delivered was 95% for the plenary sessions and 20% for the worksite visit. Although the protocol was mostly implemented as intended, dose received was lower than expected. Both managers and workers appreciated the intervention and recommended the intervention for future implementation. Workers attending all intervention sessions were most satisfied about the intervention. CONCLUSIONS: High rates for dose delivered and fidelity for the plenary sessions and relatively high satisfaction rates were achieved. Furthermore, continuous monitoring of contextual factors beforehand and alongside the implementation of interventions is recommended.
Asunto(s)
Contaminantes Ocupacionales del Aire , Industria de la Construcción , Exposición Profesional/prevención & control , Salud Laboral , Evaluación de Procesos, Atención de Salud , Cuarzo , Adulto , Anciano , Humanos , Persona de Mediana Edad , Países BajosRESUMEN
BACKGROUND: Occupational quartz exposure continues to be a serious hazard in the construction industry. Until now, evidence-based interventions aimed at reducing quartz exposure are scarce. The aim of this study was to systematically develop an intervention and to describe the study to evaluate its effectiveness. METHODS/DESIGN: The intervention was developed according to the principles of the Intervention Mapping protocol, meaning that evidence from the literature was combined with information collected from stakeholders (e.g., construction workers, managers and researchers). The intervention aimed to integrate technical, behavioural and organizational factors. The intervention consists of two plenary meetings for all employers within the company, and individual visits at construction worksites, including specific intervention materials. Additionally, a demonstration session regarding control measures was organized for all managers. The effectiveness of the intervention will be evaluated in a cluster randomized controlled trial among eight construction companies, with measurements at baseline and follow-up. Outcome measures are personal respirable dust and quartz exposure by means of exposure assessment, and behavioural and organizational determinants which will be assessed by means of questionnaires. Additionally, a process evaluation will shed light on whether the intervention (does not) works, and, if so, the reasons for this. DISCUSSION: Applying Intervention Mapping in the development of an intervention to reduce occupational quartz exposure was useful, as different stakeholders provided input for the intervention as well as the implementation strategy. Therefore, the feasibility of the intervention has been enhanced, as it appeals to construction workers and managers and will not unduly interfere with the ongoing construction work. TRIAL REGISTRATION NUMBER: NTR4586 (May 7th 2014).
Asunto(s)
Industria de la Construcción/estadística & datos numéricos , Exposición Profesional/prevención & control , Evaluación de Programas y Proyectos de Salud/métodos , Cuarzo , Polvo , Humanos , Países Bajos , Evaluación de Programas y Proyectos de Salud/estadística & datos numéricos , Encuestas y Cuestionarios , Lugar de TrabajoRESUMEN
RATIONALE: A recent study of supermarket bakery workers in South Africa demonstrated that 25% of workers were sensitised to flour allergens and 13% had baker's asthma. Evidence on exposure reduction strategies using specifically designed interventions aimed at reducing the risk of baker's asthma is scarce. OBJECTIVES: The aim of this study was to evaluate the effectiveness of different control measures to reduce airborne flour dust exposure using a randomised design. METHODS: A group-randomised study design was used to assign 30 bakeries of a large supermarket chain store to two intervention groups and a control group, of which 15 bakeries were studied. Full-shift environmental personal samples were used to characterise exposure to flour dust and wheat and rye allergens levels pre-intervention (n=176) and post-intervention (n=208). RESULTS: The overall intervention effect revealed a 50% decrease in mean flour dust, wheat and rye allergen exposure. The reduction in exposure was highest for managers (67%) and bakers (47%), and lowest for counterhands (23%). For bakers, the greatest reduction in flour dust was associated with control measures such as the use of the mixer lid (67%), divider oil (63%) or focused training (54%). However, the greatest reduction (80%) was observed when using a combination of all control measures. CONCLUSIONS: A specially designed intervention strategy reduced both flour dust and allergen levels. Best results were observed when combining both engineering controls and training. Further studies will investigate the long-term health impact of these interventions on reducing the disease burden among this group of bakers.
Asunto(s)
Alérgenos/inmunología , Asma/prevención & control , Polvo/inmunología , Harina , Manipulación de Alimentos , Enfermedades Profesionales/prevención & control , Exposición Profesional/prevención & control , Asma/etiología , Culinaria , Humanos , Enfermedades Profesionales/etiología , Enfermedades Profesionales/inmunología , Exposición Profesional/efectos adversos , Salud Laboral , Hipersensibilidad Respiratoria/etiología , Hipersensibilidad Respiratoria/prevención & control , Secale , Sudáfrica , Resultado del Tratamiento , TriticumRESUMEN
Quartz exposure can cause several respiratory health effects. Although quartz exposure has been described in several observational workplace studies, well-designed intervention studies that investigate the effect of control strategies are lacking. This article describes a baseline exposure study that is part of a multidimensional intervention program aiming to reduce quartz exposure among construction workers. In this study, personal respirable dust and quartz exposure was assessed among 116 construction workers (bricklayers, carpenters, concrete drillers, demolishers, and tuck pointers). Possible determinants of exposure, like job, tasks, and work practices, use of control measures, and organizational and psychosocial factors, were explored using exposure models for respirable dust and quartz separately. Stratified analyses by job title were performed to evaluate the effect of control measures on exposure and to explore the association between control measures and psychosocial factors. Overall, 62% of all measurements exceeded the Dutch occupational exposure limit for quartz and 11% for respirable dust. Concrete drillers and tuck pointers had the highest exposures for quartz and respirable dust (0.20 and 3.43mg m(-3), respectively). Significant predictors of elevated quartz exposure were abrasive tasks and type of material worked on. Surprisingly, in a univariate model, an increased knowledge level was associated with an increase in exposure. Although control measures were used infrequently, if used they resulted in approximately 40% reduction in quartz exposure among concrete drillers and tuck pointers. Only among concrete drillers, the use of control measures was associated with a higher score for social influence (factor 1.6); knowledge showed an inverse association with use of control measures for concrete drillers, demolishers, and tuck pointers. In conclusion, the detailed information on determinants of exposure, use of control measures, and constraints to use these control measures can be used for the determination and systematic prioritization of intervention measures used to design and implement our intervention strategy. This study underlines the need for multidisciplinary workplace exposure control strategies although larger study populations are necessary to determine a possible causal association between organizational and psychosocial factors and psychosocial factors and control measures.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Industria de la Construcción , Polvo/análisis , Exposición Profesional/análisis , Cuarzo/análisis , Adulto , Materiales de Construcción , Monitoreo del Ambiente/métodos , Humanos , Masculino , Persona de Mediana Edad , Países Bajos , Psicología , Factores de Riesgo , Encuestas y CuestionariosRESUMEN
Several studies showed that oncology nurses are exposed to antineoplastic drugs via the skin during daily activities. Several antineoplastic drugs (including cyclophosphamide) have been classified as carcinogenic to humans. This study aims to assess the leukemia risk of occupational exposure to cyclophosphamide. Average task frequencies from the population of oncology nurses in the Netherlands and task-based dermal exposure intensities were used to calculate oncology nurses' dermal exposure levels. A dermal absorption model in combination with a physiologically based pharmacokinetic model was used to assess the delivered dose of cyclophosphamide and its active metabolites in the bone marrow. This delivered dose was subsequently related to pharmacodynamic and epidemiological information from a longitudinal study with cyclophosphamide-treated patients to estimate the excess lifetime leukemia risk at age 80 for Dutch oncology nurses after 40 years of exposure to cyclophosphamide. The excess lifetime leukemia risk at age 80 of an exposed oncology nurse after 40 years of dermal exposure to cyclophosphamide was estimated to be 1.04 per million oncology nurses. This risk could potentially increase to a maximum of 154 per million if a nurse performs all cyclophosphamide-related tasks with the maximum frequency (as observed in this population) and is exposed to maximum exposure intensities for each task without using protective gloves for 40 years. This study indicates that the risk of an oncology nurse in a Dutch hospital with an average dermal exposure to cyclophosphamide is well below the maximum tolerable risk of one extra death from cancer per 250 deaths after 40 years of occupational exposure, and that this level is not exceeded in a worst-case scenario.
Asunto(s)
Antineoplásicos Alquilantes/efectos adversos , Ciclofosfamida/efectos adversos , Leucemia/inducido químicamente , Exposición Profesional/efectos adversos , Enfermería Oncológica , Antineoplásicos Alquilantes/análisis , Antineoplásicos Alquilantes/farmacocinética , Ciclofosfamida/análisis , Ciclofosfamida/farmacocinética , Guantes Protectores , Humanos , Leucemia/epidemiología , Estudios Longitudinales , Concentración Máxima Admisible , Países Bajos/epidemiología , Exposición Profesional/análisis , Medición de Riesgo , Absorción CutáneaRESUMEN
PURPOSE: Despite the importance of skin exposure, studies of skin symptoms in relation to exposure and respiratory symptoms are rare. The goals of this study were to describe exposure-response relationships for skin symptoms, and to investigate associations between skin and respiratory symptoms in bakery and auto body shop workers. METHODS: Data from previous studies of bakery and auto body shop workers were analyzed. Average exposure estimates for wheat allergen and isocyanates were used. Generalized linear models were constructed to describe the relationships between exposure and skin symptoms, as well as between skin and respiratory symptoms. RESULTS: Data from 723 bakery and 473 auto body shop workers were analyzed. In total, 5.3% of bakery and 6.1% of auto body shop workers were female; subjects' mean age was 39 and 38 years, respectively. Exposure-response relationships were observed in auto body shop workers for itchy or dry skin (PR 1.55, 95% CI 1.2-2.0) and work-related itchy skin (PR 1.97, 95% CI 1.2-3.3). A possible exposure-response relationship for work-related itchy skin in bakery workers did not reach statistical significance. In both groups, reporting skin symptoms was strongly and significantly associated with reporting respiratory symptoms, both work-related and non-work-related. CONCLUSIONS: Exposure-response relationships were observed for skin symptoms in auto body shop workers. The lack of significant exposure-response associations in bakery workers should be interpreted cautiously. Workers who reported skin symptoms were up to four times more likely to report respiratory symptoms. Improved awareness of both skin and respiratory outcomes in exposed workers is needed.
Asunto(s)
Cianatos/efectos adversos , Dermatitis Alérgica por Contacto/epidemiología , Dermatitis Profesional/epidemiología , Harina/efectos adversos , Exposición Profesional/efectos adversos , Enfermedades Respiratorias/epidemiología , Adulto , Automóviles , Comorbilidad , Culinaria , Dermatitis Alérgica por Contacto/sangre , Dermatitis Alérgica por Contacto/etiología , Dermatitis Profesional/sangre , Dermatitis Profesional/etiología , Femenino , Humanos , Inmunoglobulina E/sangre , Isocianatos , Masculino , Persona de Mediana Edad , Exposición Profesional/análisis , Prevalencia , Prurito/inducido químicamente , Prurito/epidemiología , Ruidos Respiratorios/etiología , Enfermedades Respiratorias/sangre , Enfermedades Respiratorias/inducido químicamenteRESUMEN
Exposure Based Waiving (EBW) is one of the options in REACH when there is insufficient hazard data on a specific endpoint. Rules for adaptation of test requirements are specified and a general option for EBW is given via Appendix XI of REACH, allowing waiving of repeated dose toxicity studies, reproductive toxicity studies and carcinogenicity studies under a number of conditions if exposure is very low. A decision tree is described that was developed in the European project OSIRIS (Optimised Strategies for Risk Assessment of Industrial Chemicals through Integration of Non-Test and Test Information) to help decide in what cases EBW can be justified. The decision tree uses specific criteria as well as more general questions. For the latter, guidance on interpretation and resulting conclusions is provided. Criteria and guidance are partly based on an expert elicitation process. Among the specific criteria a number of proposed Thresholds of Toxicological Concern are used. The decision tree, expanded with specific parts on absorption, distribution, metabolism and excretion that are not described in this paper, is implemented in the OSIRIS webtool on integrated testing strategies.
Asunto(s)
Exposición a Riesgos Ambientales/prevención & control , Medición de Riesgo/métodos , Pruebas de Toxicidad/normas , Árboles de Decisión , Determinación de Punto Final , Guías como Asunto , HumanosRESUMEN
The association between pesticide exposure and neurobehavioral and neurodevelopmental effects is an area of increasing concern. This symposium brought together participants to explore the neurotoxic effects of pesticides across the lifespan. Endpoints examined included neurobehavioral, affective and neurodevelopmental outcomes among occupational (both adolescent and adult workers) and non-occupational populations (children). The symposium discussion highlighted many challenges for researchers concerned with the prevention of neurotoxic illness due to pesticides and generated a number of directions for further research and policy interventions for the protection of human health, highlighting the importance of examining potential long-term effects across the lifespan arising from early adolescent, childhood or prenatal exposure.
Asunto(s)
Enfermedades de los Trabajadores Agrícolas/inducido químicamente , Agricultura , Trastornos Mentales/inducido químicamente , Sistema Nervioso/efectos de los fármacos , Síndromes de Neurotoxicidad/etiología , Exposición Profesional/efectos adversos , Plaguicidas/efectos adversos , Adolescente , Adulto , Factores de Edad , Enfermedades de los Trabajadores Agrícolas/fisiopatología , Enfermedades de los Trabajadores Agrícolas/psicología , Niño , Desarrollo Infantil/efectos de los fármacos , Países en Desarrollo , Femenino , Humanos , Masculino , Exposición Materna/efectos adversos , Trastornos Mentales/fisiopatología , Trastornos Mentales/psicología , Sistema Nervioso/crecimiento & desarrollo , Sistema Nervioso/fisiopatología , Síndromes de Neurotoxicidad/fisiopatología , Síndromes de Neurotoxicidad/psicología , Embarazo , Efectos Tardíos de la Exposición Prenatal , Medición de Riesgo , Factores de Riesgo , Factores de Tiempo , Adulto JovenRESUMEN
OBJECTIVES: Use of cost-benefit analysis in occupational health increases insight into the intervention strategy that maximises the cost-benefit ratio. This study presents a methodological framework identifying the most important elements of a cost-benefit analysis for occupational health settings. One of the main aims of the methodology is to evaluate cost-benefit ratios for different stakeholders (employers, employees and society). The developed methodology was applied to two intervention strategies focused on reducing respiratory diseases. METHODS: A cost-benefit framework was developed and used to set up a calculation spreadsheet containing the inputs and algorithms required to calculate the costs and benefits for all cost elements. Inputs from a large variety of sources were used to calculate total costs, total benefits, net costs and the benefit-to-costs ratio for both intervention scenarios. RESULTS: Implementation of a covenant intervention program resulted in a net benefit of 16â848â546 over 20 years for a population of 10â000 workers. Implementation was cost-effective for all stakeholders. For a health surveillance scenario, total benefits resulting from a decreased disease burden were estimated to be 44â659â352. The costs of the interventions could not be calculated. CONCLUSION: This study provides important insights for developing effective intervention strategies in the field of occupational medicine. Use of a model based approach enables investigation of those parameters most likely to impact on the effectiveness and costs of interventions for work related diseases. Our case study highlights the importance of considering different perspectives (of employers, society and employees) in assessing and sharing the costs and benefits of interventions.
Asunto(s)
Modelos Económicos , Enfermedades Profesionales/economía , Servicios de Salud del Trabajador/economía , Asma/economía , Asma/epidemiología , Asma/prevención & control , Análisis Costo-Beneficio , Humanos , Países Bajos/epidemiología , Enfermedades Profesionales/prevención & control , Rinitis/economía , Rinitis/epidemiología , Rinitis/prevención & controlRESUMEN
RATIONALE: Insight into the effectiveness of intervention strategies will help realise a decrease in the occupational disease burden from (allergic) respiratory diseases in the bakery population. OBJECTIVES: To use a simulation model to assess the impact of different intervention strategies on the disease burden of the bakery population over time. METHODS: A recently developed dynamic population based model was used to prospectively evaluate the impact on disease burden resulting from different intervention strategies. We distinguished interventions based on exposure reductions for flour dust and fungal α-amylase, health surveillance combined with reduction in exposure, and pre-employment screening. MAIN RESULTS: The impact of most interventions on disease burden was limited, generally less than 50% for lower respiratory symptoms and disabling occupational asthma. Only the rigorous health surveillance strategy, identifying workers who are sensitised or report upper respiratory symptoms and decreasing their individual exposures by 90% shortly after diagnosis, resulted in a decrease of almost 60% in disease burden after 20 years. CONCLUSIONS: This study demonstrates that different intervention strategies have substantially different impacts on the burden of disease. The time window during which changes occur differs considerably between strategies. This information can assist policy makers in their choice of intervention and gives guidance for achievable reductions in disease burden.
Asunto(s)
Asma/prevención & control , Manipulación de Alimentos , Hipersensibilidad/prevención & control , Enfermedades Profesionales/prevención & control , Asma/epidemiología , Asma/etiología , Polvo/análisis , Harina , Humanos , Higiene/normas , Hipersensibilidad/epidemiología , Hipersensibilidad/etiología , Hipersensibilidad Inmediata/diagnóstico , Tamizaje Masivo/métodos , Modelos Biológicos , Enfermedades Profesionales/epidemiología , Enfermedades Profesionales/etiología , Exposición Profesional/efectos adversos , Exposición Profesional/prevención & control , Vigilancia de la Población , alfa-Amilasas/toxicidadRESUMEN
Within the REACH framework, but also within OECD, there is understanding that for reasons of animal welfare, costs and logistics, it is important to limit the number of tests to be conducted. Exposure-based waiving (EBW) is a potentially important element in testing strategies. This publication describes criteria for exposure-based waiving as foreseen in the REACH regulation and gives more detail to the REACH requirements for exposure-based waiving The principle behind any EBW is that there are situations when human or environmental exposures are so low or infrequent that there is a very low probability that the acquisition of additional effect information may lead to an improvement in the ability to manage risk. EBW therefore is risk-based and needs thorough knowledge on exposure as well as on effects criteria. Both elements are discussed: exposure models are analysed and the uncertainty in their predictions discussed as well as no-effect criteria such as the threshold of toxicological concern. Examples of EBW are provided for environmental, consumer and worker exposure. REACH only allows EBW in a limited number of cases with constraints on tonnage levels, types of tests to be waived and the need for a thorough ES and exposure assessment throughout the life cycle of a chemical and for all human exposure routes and environmental pathways. EBW will only be considered a real option by industry if a cost-benefit analysis shows an advantage, which may heavily depend on the weighing factor one applies for the non-use of experimental animals.
Asunto(s)
Alternativas a las Pruebas en Animales/legislación & jurisprudencia , Seguridad de Productos para el Consumidor , Exposición a Riesgos Ambientales , Pruebas de Toxicidad , Alternativas a las Pruebas en Animales/métodos , Animales , Simulación por Computador , Análisis Costo-Beneficio , Bases de Datos Factuales , Ambiente , Exposición a Riesgos Ambientales/legislación & jurisprudencia , Contaminantes Ambientales/toxicidad , Guías como Asunto , Humanos , Nivel sin Efectos Adversos Observados , Medición de RiesgoRESUMEN
INTRODUCTION: Exposure to flour dust has been reported as an important risk factor for allergic respiratory disease among bakery workers. A high prevalence of allergic sensitization and asthma was recently reported in South African supermarket bakeries. The aim of this study was to conduct a detailed exposure assessment of these bakeries so as to provide the baseline for a broader intervention study. METHODS: A total of 211 full-shift personal samples were collected on randomly selected individuals within five different job categories in 18 bakeries. The samples were analyzed for particulate mass and specific flour dust allergens (wheat, rye, and fungal alpha-amylase). Exposure models were developed using job, bakery size, tasks, and specific ingredients used. Bakery and worker were regarded as random effect components. RESULTS: Bread bakers had the highest average (geometric mean) exposures (1.33 mg m(-3) flour dust particulate, 13.66 microg m(-3) wheat allergens, and 5.14 microg m(-3) rye allergens). For alpha-amylase allergens, most samples were below the limit of detection for several occupational titles. In the mixed effect models, the significant predictors of elevated exposure to inhalable dust particulate as well as wheat and rye allergen concentrations were large bakery size, bread baking, and use of cereal flours, while tasks such as confectionery work were negatively correlated with these exposure metrics. Weighing tasks and use of premix products were associated with increased exposure to fungal alpha-amylase. A high correlation between particulate dust and wheat (r = 0.84) as well as rye (r = 0.86) was observed, with a much lower correlation between particulate dust and fungal alpha-amylase (r = 0.33). Overall, a low proportion (39%) of bakery stores implemented various control measures to reduce dust exposures in the bakeries. CONCLUSIONS: This study confirms that current exposure control strategies in supermarket bakery stores are inadequate in reducing dust exposures to protect the health of bakery workers.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Polvo/análisis , Harina/análisis , Exposición Profesional/estadística & datos numéricos , Contaminantes Ocupacionales del Aire/normas , Contaminación del Aire Interior/análisis , Contaminación del Aire Interior/estadística & datos numéricos , Alérgenos/análisis , Asma/epidemiología , Pan , Culinaria/normas , Culinaria/estadística & datos numéricos , Monitoreo del Ambiente , Monitoreo Epidemiológico , Harina/normas , Industria de Procesamiento de Alimentos/estadística & datos numéricos , Hongos/enzimología , Humanos , Exposición por Inhalación/análisis , Exposición por Inhalación/normas , Exposición por Inhalación/estadística & datos numéricos , Enfermedades Profesionales/epidemiología , Exposición Profesional/análisis , Exposición Profesional/normas , Equipos de Seguridad/estadística & datos numéricos , Hipersensibilidad Respiratoria/epidemiología , Factores de Riesgo , Sudáfrica/epidemiología , alfa-Amilasas/análisisRESUMEN
OBJECTIVES: To effectively decrease occupational exposure to flour dust and related allergens, detailed information on exposure determinants and effectiveness of control measures is essential. In this paper, we use personal real-time exposure measurements to get more insight into the relationship between specific work characteristics, including the use of control measures, and (peak) exposure to flour dust. The study has three objectives: (i) identify tasks and activities related to peak exposure, (ii) identify control measures and other important exposure determinants and (iii) assess the potential impact of these control measures on the (peak) exposure to flour dust. METHODS: A data set containing 82 real-time exposure measurements in combination with information from detailed observations was used to study the association between peak exposures and different tasks, activities and other determinants such as control measures. Descriptive statistics of peak exposure on job level were generated as well as information on contribution of task-specific peak exposures to time-weighted average (TWA) exposure levels. Finally, we evaluated the efficacy of a variety of control measures on task exposure by comparing exposure levels of groups of workers with and without controls. RESULTS: In workers included in this study, >75% of TWA exposure is directly associated with peak exposures during a limited set of well-defined tasks/activities. The impact of a single task on population TWA exposure is generally limited (<40%). Worker behavior seems an important determinant in effective exposure control for many tasks. CONCLUSIONS: Data from real-time measurements provide important detailed information with respect to exposure determinants and control measures, not obtainable from conventional measurement studies focusing at TWA exposure. This information is essential to perform prospective impact assessments of intervention strategies on the populations' exposure distribution.
Asunto(s)
Monitoreo del Ambiente/métodos , Harina , Industria de Alimentos , Exposición Profesional/análisis , Estudios Transversales , Polvo/análisis , Humanos , Exposición por Inhalación/análisis , Exposición por Inhalación/prevención & control , Exposición Profesional/prevención & controlRESUMEN
OBJECTIVES: This paper describes the development and evaluation of an evidence database on the effectiveness of risk management measures (RMMs) to control inhalation exposure. This database is referred to as Exposure Control Efficacy Library (ECEL). METHODS: A comprehensive review of scientific journals in the occupational hygiene field was undertaken. Efficacy values for RMMs in conjunction with contextual information on study design, sampling strategy and measurement type (among other parameters) were stored in an MS Access database. In total, 433 efficacy values for six RMM groups (i.e. enclosure, local exhaust ventilation, specialized ventilation, general ventilation, suppression techniques and separation of the worker) were collected from 90 peer-reviewed publications. These RMM categories were subdivided into more specific categories. RESULTS: Estimated average efficacy values ranged from 87% for specialized ventilation to 43% for general ventilation. Substantial variation in efficacy values was observed within RMM categories based on differences in selected covariables within each study (i.e. study design, sampling strategy, measurement type and others). More contrast in efficacy values was observed when evaluating more detailed subcategories. CONCLUSIONS: It is envisaged that ECEL will contribute to exposure modelling, but should be supplemented with expert opinion, preferably in a formal expert elicitation procedure. The work presented here should be considered as a first attempt to collate and analyse RMM efficacy values and inclusion of additional (unpublished) exposure data is highly warranted.
Asunto(s)
Contaminantes Ocupacionales del Aire/análisis , Exposición por Inhalación/prevención & control , Exposición Profesional/prevención & control , Bases de Datos Bibliográficas , Medicina Basada en la Evidencia , Humanos , Gestión de Riesgos/métodos , Gestión de Riesgos/normasRESUMEN
INTRODUCTION: Recent studies have shown that even low exposure levels to flour dust and related allergens can cause severe respiratory symptoms. In The Netherlands the Dutch government and responsible branch organizations [from bakeries (traditional & industrial), flour mills and bakery ingredient producers] signed a covenant to reduce exposure to flour dust and decrease the prevalence of work-related occupational airway disease. This paper describes a sector wide survey to measure exposure to flour dust, wheat allergens and fungal alpha-amylase. The results are being used to underpin various elements of the covenant. METHODS: A dataset containing 910 personal measurements was compiled from four field studies containing information on exposure and potential determinants. The dataset represents a baseline estimate of exposure for four major flour processing sectors in The Netherlands. Exposure models for all sectors and agents were generated, based on job, tasks and company size, taking into account worker and company as random effect components. Use of control measures and, where possible, their effect were evaluated. RESULTS: Flour dust and enzyme exposures vary strongly between sectors. The job performed and specific tasks were identified as important determinants of exposure. The number of identified control measures during walk-through surveys, and their effectiveness in reduction of dust exposure was generally limited. The exposure models explained significant exposure variability between companies and workers but performed poorly in explaining day to day differences in exposure. DISCUSSION: The dataset serves as a baseline estimate and will be compared with a post intervention survey in the near future. The information obtained on control measures can be used to optimize the intervention scenarios that will be implemented in the different sectors by external occupational hygienists. The predictive exposure models will provide a relevant measure of average personal exposure that will be used in the sector wide health surveillance system.
Asunto(s)
Polvo/análisis , Harina/análisis , Industria de Procesamiento de Alimentos , Exposición Profesional/análisis , Alérgenos/toxicidad , Polvo/prevención & control , Harina/efectos adversos , Hongos/enzimología , Humanos , Exposición por Inhalación/efectos adversos , Exposición por Inhalación/análisis , Exposición por Inhalación/prevención & control , Modelos Biológicos , Países Bajos , Enfermedades Profesionales/prevención & control , Exposición Profesional/efectos adversos , Exposición Profesional/prevención & control , Enfermedades Respiratorias/prevención & control , Triticum/inmunología , alfa-Amilasas/toxicidadRESUMEN
BACKGROUND: Occupational allergen exposure assessment usually requires airborne dust sampling at the worksite followed by dust extraction and enzyme immunoassay (EIA) analysis at the laboratory. Use of semiquantitative lateral flow immunoassays (LFIAs) may allow a more rapid detection procedure with direct on-site demonstration of a bioallergen exposure hazard. OBJECTIVE: In a field study, we evaluated a recently developed LFIA for fungal alpha-amylase, an important bakery allergen. METHODS: Airborne and surface dust (wipe) samples and samples from flours and baking additives used at the workplace were collected in 5 industrial bakeries and tested in the LFIA for fungal amylase. For comparison, amylase was measured in sample eluates with the reference EIA method. RESULTS: Sensitivity of the LFIA was 1 to 10 ng/mL, and of EIA, approximately 25 pg/mL. In LFIA, most flour samples, 84% of wipe samples, 26% of personal airborne dust, and none of the 26 ambient air dust samples produced a visible reaction. Wipe samples from dough-making areas and flour samples gave the strongest reactions. All extracts with >5 ng allergen per milliliter showed a positive LFIA reaction. CONCLUSION: The LFIA for fungal amylase is an easy and rapid method to demonstrate the allergen directly at the worksite in less than 10 to 20 minutes. Similar LFIA methods may be used for other occupational allergens in other work environments. CLINICAL IMPLICATIONS: Lateral flow immunoassays for occupational allergens may be of great value in occupational hygiene surveys to demonstrate directly to workers and supervisors the hazards of work-related bioallergen exposure.