Semi-industrial production of a minimally processed infant formula powder using membrane filtration.

Infant formula (IF) is submitted to several heat treatments during production, which can lead to denaturation or aggregation of proteins and promote Maillard reaction. The objective of this study was to investigate innovative minimal processing routes for the production of first-age IF powder, thus ensuring microbial safety with minimal level of protein denaturation. Three nutritionally complete IF powders were produced at a semi-industrial scale based on ingredients obtained by fresh bovine milk microfiltration (0.8 and 0.1-µm pore size membranes). Low-temperature vacuum evaporation (50°C) and spray-drying (inlet and outlet temperatures of 160 and 70°C, respectively) were conducted to produce the T- formula with no additional heat treatment. The T+ formula was produced with a moderate heat treatment (75°C for 2 min) applied before spray-drying, whereas the T+++ formula received successive heat treatments (72°C for 30 s on the milk; 90°C for 2-3 s before evaporation; 85°C for 2 min before spray-drying), thus mimicking commercial powdered IF. Protein denaturation and Maillard reaction products were followed throughout the production steps and the physicochemical properties of the powders were characterized. The 3 IF powders presented satisfactory physical properties in terms of aw, free fat content, glass transition temperature, and solubility index, as well as satisfactory bacteriological quality with a total flora <103 cfu/g and an absence of pathogens when a high level of bacteriological quality of the ingredients was ensured. Protein denaturation occurred mostly during the heat treatments of T+ and T+++ and was limited during the spray-drying process. The IF powder produced without heat treatment (T-) presented a protein denaturation extent (6 ± 4%) significantly lower than that in T+++ (58 ± 0%), but not significantly different from that in T+ (10 ± 4%). Although T- tended to contain less Maillard reaction products than T+ and T+++, the Maillard reaction products did not significantly discriminate the infant formulas in the frame of this work. The present study demonstrated the feasibility of producing at a semi-industrial scale an infant formula being bacteriologically safe and containing a high content of native proteins. Application of a moderate heat treatment before spray-drying could further guarantee the microbiological quality of the IF powders while maintaining a low protein denaturation extent. This study opens up new avenues for the production of minimally processed IF powders.

Fat properties during homogenization, spray-drying, and storage affect the physical properties of dairy powders.

Changes in fat properties were studied before, during, and after the drying process (including during storage) to determine the consequences on powder physical properties. Several methods were combined to characterize changes in fat structure and thermal properties as well as the physical properties of powders. Emulsion droplet size and droplet aggregation depended on the homogenizing pressures and were also affected by spray atomization. Aggregation was usually greater after spray atomization, resulting in greater viscosities. These processes did not have the same consequences on the stability of fat in the powders. The quantification of free fat is a pertinent indicator of fat instability in the powders. Confocal laser scanning microscopy permitted the characterization of the structure of fat in situ in the powders. Powders from unhomogenized emulsions showed greater free fat content. Surface fat was always overrepresented, regardless of the composition and process parameters. Differential scanning calorimetry melting experiments showed that fat was partially crystallized in situ in the powders stored at 20 degrees C, and that it was unstable on a molecular scale. Thermal profiles were also related to the supramolecular structure of fat in the powder particle matrix. Powder physical properties depended on both composition and process conditions. The free fat content seemed to have a greater influence than surface fat on powder physical properties, except for wettability. This study clearly showed that an understanding of fat behavior is essential for controlling and improving the physical properties of fat-filled dairy powders and their overall quality.