Differential functionalisation of the internal and external surfaces of carbon-stabilised nanoporous silicon.

We report the first method to introduce differential functionalities in the interior pore walls and exterior surface of highly stable thermally hydrocarbonised porous silicon (THCpSi) films. The approach exploits the hydrophobicity of the hydrosilylated THCpSi to, first, selectively functionalise the external surface, and subsequently derivatise the hydrophobic internal pore walls.

Adhesive Prebiotic Chemistry Inspired Coatings for Bone Contacting Applications.

New and improved bone-contacting medical devices are required to provide excellent bioactivity at the biointerface. Here, we have used coatings based on prebiotic chemistry inspired polymerization of aminomalonitrile (AMN) in combination with comonomers 3,4-di- and 3,4,5-trihydroxybenzaldehyde (DHBA and THBA). The comonomers were incorporated into the AMN coatings to enhance polymerization kinetics, adhesive properties, metal binding efficacy, and human mesenchymal stem cell (hMSC) response. Incorporation of DHBA and THBA as separate comonomers enhanced the polymerization kinetics compared to that of AMN polymerization alone, with 30 mol % THBA (30T) resulting in a 6-fold increase in thickness over 24 h. Furthermore, the adhesion of AMN coatings to silicon was enhanced when copolymerized with the HBA monomers, where the interfacial adhesion of the 30T coating was increased 20-fold. The ability of the coatings to incorporate zinc ions was investigated, and X-ray photoelectron spectroscopy (XPS) analysis demonstrated that incorporating 30T increased the binding efficiency 4-fold compared to that of AMN alone. The attachment, proliferation, and morphology of human mesenchymal stem cells (hMSC) on these coatings was investigated and reported. Finally, the utility of the coatings as osteogenic support matrices via the induced osteogenic differentiation of hMSCs is reported. The AMN and 30T coatings resulted in the greatest efficiency of osteogenic differentiation, as measured by intracellular ALP activity and mineralization. Incorporation of zinc had a stimulatory effect on hMSC proliferation with 30T coatings, while enhanced mineralization was observed with the zinc functionalized AMN and 30T coatings. This study highlights the potential of prebiotic chemistry inspired coatings in biomedical applications.

Effects of bound versus soluble pentosan polysulphate in PEG/HA-based hydrogels tailored for intervertebral disc regeneration.

Previous reports in the literature investigating chondrogenesis in mesenchymal progenitor cell (MPC) cultures have confirmed the chondro-inductive potential of pentosan polysulphate (PPS), a highly sulphated semi-synthetic polysaccharide, when added as a soluble component to culture media under standard aggregate-assay conditions or to poly(ethylene glycol)/hyaluronic acid (PEG/HA)-based hydrogels, even in the absence of inductive factors (e.g. TGFß). In this present study, we aimed to assess whether a 'bound' PPS would have greater activity and availability over a soluble PPS, as a media additive or when incorporated into PEG/HA-based hydrogels. We achieved this by covalently pre-binding the PPS to the HA component of the gel (forming a new molecule, HA-PPS). We firstly investigated the activity of HA-PPS compared to free PPS, when added as a soluble factor to culture media. Cell proliferation, as determined by CCK8 and EdU assay, was decreased in the presence of either bound or free PPS whilst chondrogenic differentiation, as determined by DMMB assay and histology, was enhanced. In all cases, the effect of the bound PPS (HA-PPS) was more potent than that of the unbound form. These results alone suggest wider applications for this new molecule, either as a culture supplement or as a coating for scaffolds targeted at chondrogenic differentiation or maturation. We then investigated the incorporation of HA-PPS into a PEG/HA-based hydrogel system, by simply substituting some of the HA for HA-PPS. Rheological testing confirmed that incorporation of either HA-PPS or PPS did not significantly affect gelation kinetics, final hydrogel modulus or degradation rate but had a small, but significant, effect on swelling. When encapsulated in the hydrogels, MPCs retained good viability and rapidly adopted a rounded morphology. Histological analysis of both GAG and collagen deposition after 21 days showed that the incorporation of the bound-PPS into the hydrogel resulted in increased matrix formation when compared to the addition of soluble PPS to the hydrogel, or the hydrogel alone. We believe that this new generation injectable, degradable hydrogel, incorporating now a covalently bound-PPS, when combined with MPCs, has the potential to assist cartilage regeneration in a multitude of therapeutic targets, including for intervertebral disc (IVD) degeneration.

An injectable hydrogel incorporating mesenchymal precursor cells and pentosan polysulphate for intervertebral disc regeneration.

Intervertebral disc (IVD) degeneration is one of the leading causes of lower back pain and a major health problem worldwide. Current surgical treatments include excision or immobilisation, with neither approach resulting in the repair of the degenerative disc. As such, a tissue engineering-based approach in which stem cells, coupled with an advanced delivery system, could overcome this deficiency and lead to a therapy that encourages functional fibrocartilage generation in the IVD. In this study, we have developed an injectable hydrogel system based on enzymatically-crosslinked polyethylene glycol and hyaluronic acid. We examined the effects of adding pentosan polysulphate (PPS), a synthetic glycosaminoglycan-like factor that has previously been shown (in vitro and in vivo) to this gel system in order to induce chondrogenesis in mesenchymal precursor cells (MPCs) when added as a soluble factor, even in the absence of additional growth factors such as TGF-ß. We show that both the gelation rate and mechanical strength of the resulting hydrogels can be tuned in order to optimise the conditions required to produce gels with the desired combination of properties for an IVD scaffold. Human immunoselected STRO-1+ MPCs were then incorporated into the hydrogels. They were shown to retain good viability after both the initial formation of the gel and for longer-term culture periods in vitro. Furthermore, MPC/hydrogel composites formed cartilage-like tissue which was significantly enhanced by the incorporation of PPS into the hydrogels, particularly with respect to the deposition of type-II-collagen. Finally, using a wild-type rat subcutaneous implantation model, we examined the extent of any immune reaction and confirmed that this matrix is well tolerated by the host. Together these data provide evidence that such a system has significant potential as both a delivery vehicle for MPCs and as a matrix for fibrocartilage tissue engineering applications.

Inducing alignment of cyclic peptide nanotubes through the use of structured ionic liquids.

We describe a convenient route to the alignment of cyclic peptide nanotubes (CPNs). The key lies in the use of nanostructured ionic liquids. An ionic liquid supported membrane with orientated domains is demonstrated, leading to aligned CPNs within a solid membrane.

Tailorable cell culture platforms from enzymatically cross-linked multifunctional poly(ethylene glycol)-based hydrogels.

As stem-cell-based therapies rapidly advance toward clinical applications, there is a need for cheap, easily manufactured, injectable gels that can be tailored to carry stem cells and impart function to such cells. Herein we describe a process for making hydrogels composed of hydroxyphenyl propionic acid (HPA) conjugated, branched poly(ethylene glycol) (PEG) via an enzyme mediated, oxidative cross-linking method. Functionalization of the branched PEG with HPA at varying degrees of substitution was confirmed via attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and (1)H NMR. The versatility of this hydrogel system was exemplified through variations in the degree of HPA substitution, polymer concentration, and the concentration of cross-linking reagents (horseradish peroxidase and H(2)O(2)), which resulted in a range of mechanical properties and gelation kinetics for these gels. Cross-linking of the PEG-HPA conjugate with a recombinantly produced Fibronectin fragment (Type III domains 7-10) encouraged attachment and spreading of human mesenchymal stem cells (hMSCs) when assessed in both two-dimensional and three-dimensional formats. Interestingly, when encapsulated in both nonfunctionalized and functionalized cross-linked PEG-HPA gels, MSCs showed good viability over all time periods assessed. With tunable gelation kinetics and mechanical properties, these hydrogels provide a flexible in vitro cell culture platform that will likely have significant utility in tissue engineering as an injectable delivery platform for cells to sites of tissue damage.

One step multifunctional micropatterning of surfaces using asymmetric glow discharge plasma polymerization.

Micropatterning of surfaces with varying chemical, physical and topographical properties usually requires a number of fabrication steps. Herein, we describe a micropatterning technique based on plasma enhanced chemical vapour deposition (PECVD) that deposits both protein resistant and protein repellent surface chemistries in a single step. The resulting multifunctional, selective surface chemistries are capable of spatially controlled protein adhesion, geometric confinement of cells and the site specific confinement of enzyme mediated peptide self-assembly.

An X-ray and neutron reflectometry study of 'PEG-like' plasma polymer films.

Plasma-enhanced chemical vapour-deposited films of di(ethylene glycol) dimethyl ether were analysed by a combination of X-ray photoelectron spectroscopy, atomic force microscopy, quartz crystal microbalance with dissipation monitoring (QCM-D), X-ray and neutron reflectometry (NR). The combination of these techniques enabled a systematic study of the impact of plasma deposition conditions upon resulting film chemistry (empirical formula), mass densities, structure and water solvation, which has been correlated with the films' efficacy against protein fouling. All films were shown to contain substantially less hydrogen than the original monomer and absorb a vast amount of water, which correlated with their mass density profiles. A proportion of the plasma polymer hydrogen atoms were shown to be exchangeable, while QCM-D measurements were inaccurate in detecting associated water in lower power films that contained loosely bound material. The higher protein resistance of the films deposited at a low load power was attributed to its greater chemical and structural similarity to that of poly(ethylene glycol) graft surfaces. These studies demonstrate the utility of using X-ray and NR analysis techniques in furthering the understanding of the chemistry of these films and their interaction with water and proteins.

One-step method for generating PEG-like plasma polymer gradients: chemical characterization and analysis of protein interactions.

In this work we report a one-step method for the fabrication of poly(ethylene glycol) PEG-like chemical gradients, which were deposited via continuous wave radio frequency glow discharge plasma polymerization of diethylene glycol dimethyl ether (DG). A knife edge top electrode was used to produce the gradient coatings at plasma load powers of 5 and 30 W. The chemistry across the gradients was analyzed using a number of complementary techniques including spatially resolved synchrotron source grazing incidence FTIR microspectroscopy, X-ray photoelectron spectroscopy (XPS) and synchrotron source near edge X-ray absorption fine structure (NEXAFS) spectroscopy. Gradients deposited at lower load power retained a higher degree of monomer like functionality as did the central region directly underneath the knife edge electrode of each gradient film. Surface derivatization experiments were employed to investigate the concentration of residual ether units in the films. In addition, surface derivatization was used to investigate the reactivity of the gradient films toward primary amine groups in a graft copolymer of poly (L-lysine) and poly(ethylene glycol) (PLL-g-PEG copolymer) which was correlated to residual aldehyde, ketone and carboxylic acid functionalities within the films. The protein adsorption characteristics of the gradients were analyzed using three proteins of varying size and charge. Protein adsorption varied and was dependent on the chemistry and the physical properties (such as size and charge) of the proteins. A correlation between the concentration of ether functionality and the protein fouling characteristics along the gradient films was observed. The gradient coating technique developed in this work allows for the efficient and high-throughput study of biomaterial gradient coating interactions.

Characterization of low-fouling ethylene glycol containing plasma polymer films.

Low-protein-fouling poly(ethylene glycol) (PEG-like) plasma polymer films were prepared using radio frequency glow discharge polymerization of diethylene glycol dimethyl ether (DGpp) on top of a heptylamine plasma polymer primer layer. By varying the plasma deposition conditions, the chemistry of the DGpp film was influenced, especially in regard to the level of ether content, which in turn influenced the relative levels of bovine serum albumin and lysozyme protein fouling. Surface potential measurements indicated that these surfaces carried a net negative charge. While protein fouling remained low ( approximately 10 ng/cm2), there was a slightly higher level of the positively charged protein adsorbed on these films than the negative protein. The interaction forces measured between a silica spherical surface on both "high"- and "low"-protein-fouling DGpp films were all repulsive and short ranged (2-3 nm). There was no correlation between the surface forces measured for high- and low-protein-fouling DGpp films. Thus, it appears that enthalpic effects are very important in reducing protein adsorption. We therefore conclude that it is the concentration of residual, ethylene glycol containing species that are the crucial parameter determining protein resistance due to a combination of both entropic and enthalpic effects.