RESUMEN
One commonly observed binding motif in metalloproteins involves the interaction between a metal ion and histidine's imidazole side chains. Although previous imidazole-M(II) parameters established the flexibility and reliability of the 12-6-4 Lennard-Jones (LJ)-type nonbonded model by simply tuning the ligating atom's polarizability, they have not been applied to multiple-imidazole complexes. To fill this gap, we systematically simulate multiple-imidazole complexes (ranging from one to six) for five metal ions (Co(II), Cu(II), Mn(II), Ni(II), and Zn(II)) which commonly appear in metalloproteins. Using extensive (40 ns per PMF window) sampling to assemble free energy association profiles (using OPC water and standard HID imidazole charge models from AMBER) and comparing the equilibrium distances to DFT calculations, a new set of parameters was developed to focus on energetic and geometric features of multiple-imidazole complexes. The obtained free energy profiles agree with the experimental binding free energy and DFT calculated distances. To validate our model, we show that we can close the thermodynamic cycle for metal-imidazole complexes with up to six imidazole molecules in the first solvation shell. Given the success in closing the thermodynamic cycles, we then used the same extended sampling method for six other metal ions (Ag(I), Ca(II), Cd(II), Cu(I), Fe(II), and Mg(II)) to obtain new parameters. Since these new parameters can reproduce the one-imidazole geometry and energy accurately, we hypothesize that they will reasonably predict the binding free energy of higher-level coordination numbers. Hence, we did not extend the analysis of these ions up to six imidazole complexes. Overall, the results shed light on metal-protein interactions by emphasizing the importance of ligand-ligand interaction and metal-π-stacking within metalloproteins.
RESUMEN
We report the development and testing of new integrated cyberinfrastructure for performing free energy simulations with generalized hybrid quantum mechanical/molecular mechanical (QM/MM) and machine learning potentials (MLPs) in Amber. The Sander molecular dynamics program has been extended to leverage fast, density-functional tight-binding models implemented in the DFTB+ and xTB packages, and an interface to the DeePMD-kit software enables the use of MLPs. The software is integrated through application program interfaces that circumvent the need to perform "system calls" and enable the incorporation of long-range Ewald electrostatics into the external software's self-consistent field procedure. The infrastructure provides access to QM/MM models that may serve as the foundation for QM/MM-ΔMLP potentials, which supplement the semiempirical QM/MM model with a MLP correction trained to reproduce ab initio QM/MM energies and forces. Efficient optimization of minimum free energy pathways is enabled through a new surface-accelerated finite-temperature string method implemented in the FE-ToolKit package. Furthermore, we interfaced Sander with the i-PI software by implementing the socket communication protocol used in the i-PI client-server model. The new interface with i-PI allows for the treatment of nuclear quantum effects with semiempirical QM/MM-ΔMLP models. The modular interoperable software is demonstrated on proton transfer reactions in guanine-thymine mispairs in a B-form deoxyribonucleic acid helix. The current work represents a considerable advance in the development of modular software for performing free energy simulations of chemical reactions that are important in a wide range of applications.
RESUMEN
Phosphate derivatives and their interaction with metal cations are involved in many important biological phenomena, so an accurate characterization of the phosphate-metal interaction is necessary to properly understand the role of phosphate-metal contacts in mediating biological function. Herein, we improved the standard 12-6 Lennard-Jones (LJ) potential via the usage of the 12-6-4 LJ model, which incorporates ion-induced dipole interactions. Via parameter scanning, we fine-tuned the 12-6-4 LJ polarizability values to obtain accurate absolute binding free energies for the phosphate anions H2PO4-, HPO42-, PO43- coordinating with Ca2+ and Mg2+. First, we modified the phosphate 12-6-4 LJ parameters to reproduce the solvation free energies of the series of phosphate anions using the thermodynamic integration (TI) method. Then, using the potential mean force (PMF) method, the polarizability of the metal-phosphate interaction was obtained. We show that the free energy profiles of phosphate ions coordinated to Ca2+ and Mg2+ generally show similar trends at longer metal-phosphate distances, while the absolute binding energy values increased with deprotonation. The resulting parameters demonstrate the flexibility of the 12-6-4 LJ-type nonbonded model and its usefulness in accurately describing cation-anion interactions.
RESUMEN
Transition metal complexes are a class of compounds with varied and versatile properties, making them of great technological importance. Their applications cover a wide range of fields, either as metallodrugs in medicine or as materials, catalysts, batteries, solar cells, etc. The demand for the novel design of transition metal complexes with new properties remains of great interest. However, the traditional high-throughput screening approach is inherently expensive and laborious since it depends on human expertise. Here, we present LigandDiff, a generative model for the de novo design of novel transition metal complexes. Unlike the existing methods that simply extract and combine ligands with the metal to get new complexes, LigandDiff aims at designing configurationally novel ligands from scratch, which opens new pathways for the discovery of organometallic complexes. Moreover, it overcomes the limitations of current methods, where the diversity of new complexes highly relies on the diversity of available ligands, while LigandDiff can design numerous novel ligands without human intervention. Our results indicate that LigandDiff designs unique and novel ligands under different contexts, and these generated ligands are synthetically accessible. Moreover, LigandDiff shows good transferability by generating successful ligands for any transition metal complex.
RESUMEN
Understanding the energetic landscapes of large molecules is necessary for the study of chemical and biological systems. Recently, deep learning has greatly accelerated the development of models based on quantum chemistry, making it possible to build potential energy surfaces and explore chemical space. However, most of this work has focused on organic molecules due to the simplicity of their electronic structures as well as the availability of data sets. In this work, we build a deep learning architecture to model the energetics of zinc organometallic complexes. To achieve this, we have compiled a configurationally and conformationally diverse data set of zinc complexes using metadynamics to overcome the limitations of traditional sampling methods. In terms of the neural network potentials, our results indicate that for zinc complexes, partial charges play an important role in modeling the long-range interactions with a neural network. Our developed model outperforms semiempirical methods in predicting the relative energy of zinc conformers, yielding a mean absolute error (MAE) of 1.32 kcal/mol with reference to the double-hybrid PWPB95 method.
Asunto(s)
Redes Neurales de la Computación , Zinc , Zinc/química , Conformación Molecular , Complejos de Coordinación/química , Modelos Moleculares , Termodinámica , Teoría Cuántica , Simulación de Dinámica MolecularRESUMEN
We report a Fe(II) data set of more than 23000 conformers in both low-spin (LS) and high-spin (HS) states. This data set was generated to develop a neural network model that is capable of predicting the energy and the energy splitting as a function of the conformation of a Fe(II) organometallic complex. In order to achieve this, we propose a type of scaled electronic embedding to cover the long-range interactions implicitly in our neural network describing the Fe(II) organometallic complexes. For the total energy prediction, the lowest MAE is 0.037 eV, while the lowest MAE of the splitting energy is 0.030 eV. Compared to baseline models, which only incorporate short-range interactions, our scaled electronic embeddings improve the accuracy by over 70% for the prediction of the total energy and the splitting energy. With regard to semiempirical methods, our proposed models reduce the MAE, with respect to these methods, by 2 orders of magnitude.
RESUMEN
Metal ions play crucial roles in protein- and ligand-mediated interactions. They not only act as catalysts to facilitate biological processes but are also important as protein structural elements. Accurately predicting metal ion interactions in computational studies has always been a challenge, and various methods have been suggested to improve these interactions. One such method is the 12-6-4 Lennard-Jones (LJ)-type nonbonded model. Using this model, it has been possible to successfully reproduce the experimental properties of metal ions in aqueous solution. The model includes induced dipole interactions typically ignored in the standard 12-6 LJ nonbonded model. In this we expand the applicability of this model to metal ion-carboxylate interactions. Using 12-6-4 parameters that reproduce the solvation free energies of the metal ions leads to an overestimation of metal ion-acetate interactions, thus, prompting us to fine-tune the model to specifically handle the latter. We also show that the standard 12-6 LJ model significantly falls short in reproducing the experimental binding free energy between acetate and 11 metal ions (Ni(II), Mg(II), Cu(II), Zn(II), Co(II), Cu(I), Fe(II), Mn(II), Cd(II), Ca(II), and Ag(I)). In this study, we describe optimized C4 parameters for the 12-6-4 LJ nonbonded model to be used with three widely employed water models (Transferable Intermolecular Potential with 3 Points (TIP3P), Simple Point Charge Extended (SPC/E), and Optimal Point Charge (OPC) water models). These parameters can accurately match the experimental binding free energy between 11 metal ions and acetate. These parameters can be applied to the study of metalloproteins and transition metal ion channels and transporters, as acetate serves as a representative of the negatively charged amino acid side chains from aspartate and glutamate.
RESUMEN
Accurately determining the global minima of a molecular structure is important in diverse scientific fields, including drug design, materials science, and chemical synthesis. Conformational search engines serve as valuable tools for exploring the extensive conformational space of molecules and for identifying energetically favorable conformations. In this study, we present a comparison of Auto3D, CREST, Balloon, and ETKDG (from RDKit), which are freely available conformational search engines, to evaluate their effectiveness in locating global minima. These engines employ distinct methodologies, including machine learning (ML) potential-based, semiempirical, and force field-based approaches. To validate these methods, we propose the use of collisional cross-section (CCS) values obtained from ion mobility-mass spectrometry studies. We hypothesize that experimental gas-phase CCS values can provide experimental evidence that we likely have the global minimum for a given molecule. To facilitate this effort, we used our gas-phase conformation library (GPCL) which currently consists of the full ensembles of 20 small molecules and can be used by the community to validate any conformational search engine. Further members of the GPCL can be readily created for any molecule of interest using our standard workflow used to compute CCS values, expanding the ability of the GPCL in validation exercises. These innovative validation techniques enhance our understanding of the conformational landscape and provide valuable insights into the performance of conformational generation engines. Our findings shed light on the strengths and limitations of each search engine, enabling informed decisions for their utilization in various scientific fields, where accurate molecular structure determination is crucial for understanding biological activity and designing targeted interventions. By facilitating the identification of reliable conformations, this study significantly contributes to enhancing the efficiency and accuracy of molecular structure determination, with particular focus on metabolite structure elucidation. The findings of this research also provide valuable insights for developing effective workflows for predicting the structures of unknown compounds with high precision.