Systematic review and network meta-analysis of restorative therapy and adhesive strategies in root caries lesions.

AIM: This systematic review and network meta-analysis (NMA) aimed to establish a clinically relevant hierarchy of the different adhesive and/or restorative approaches to restore cavitated root caries lesions through the synthesis of available evidence. MATERIALS AND METHODS: A systematic search was conducted in Medline/Web of Science/Embase/ Cochrane Library/Scopus/grey literature. RCTs investigating ≥2 restorative strategies (restorative /adhesive materials) for root caries lesions in adult patients were included. Risk of bias within studies was assessed (Cochrane_RoB-2) and the primary outcome was survival rate of restorations at different follow-up times (6-/12-/24-months). Network meta-analyses were conducted using a random effects model stratified by follow-up times. I2-statistics assessed the ratio of true to total variance in the observed effects. All available combinations of adhesives (1-SE: one-step self-etch; 2-3ER: two-/three-step etch-and-rinse) and restorative materials (conventional composite (CC) as well as conventional and resin-modified glass ionomer cements (GIC, RMGIC)) were included. Risk of bias across studies and confidence in NMA (CINeMA) were assessed. RESULTS: 547 studies were identified and nine were eligible for the NMA. In total, 1263 root caries lesions have been restored in 473 patients in the included clinical trials. Patients involved were either healthy (n = 6 trials), living in nursing homes (n = 1 trial) or received head-and-neck radiotherapy (n = 2 trials). There was statistically weak evidence to favour either of material/material combination regarding the survival rate. A tendency for higher survival rate (24-months) was observed for 2-3ER/CC (OR24mths 2.65; 95%CI=1.45/4.84) as well as RMGIC (OR24mths 2.05; 95%CI=1.17/3.61) compared to GIC. These findings were though not statistically significant and confidence of the NMA was low. CONCLUSION: An evidence-based choice of restorative strategy for managing cavitated root caries lesions is currently impossible. There is a clear need for more standardised, well-designed RCTs evaluating the retention rate of root caries restoration approaches.

Success and complication rates of non-precious alloy telescopic crowns in a general dental practice.

OBJECTIVES: This retrospective, single-center, practice-based cohort study aimed to analyze factors associated with the success of removable partial dentures retained by telescopic crowns (TRPD). MATERIALS AND METHODS: TRPD which were placed in a single practice of a practice-based research network were analyzed. Data from 139 patients (age (SD): 66 (11) years; 66 female) with 174 TRPD including 488 non-precious alloy telescopic crowns (TC) between 2004 and 2016 were included. TC without any technical complication were considered as successful, and as survived, if they were still in function at the last check-up. Multilevel Cox proportional hazard models were used to evaluate the association between clinical factors and time until failure. RESULTS: Within a mean follow-up period (SD) of 4.2 (3.3) years (min-max: 1 day-12 years), 372 (76%) TC (AFR5years,TC-level: 5.0%) as well as 136 (87%) TRPD (AFR5years,TRPD-level: 5.1%) ("worst-case scenario") and 150 (86%) TRPD (AFR5years,TRPD-level: 3.4%) ("best-case scenario") were considered as successful. The main failure types were recementation (n = 39), endodontic treatment (n = 36), and extraction (n = 35). TC in male patients showed 1.6 times higher risk for failure than in female patients (95%CI: 1.1-2.4; p = 0.023). TC on premolars showed 2.2 times higher risk for failure than on incisors (95%CI: 1.1-5.0; p = 0.023) and TC in dentures with ≤ 3TC showed 2.1 times higher risk for failure than TC in dentures with > 3TC (1.3-3.4; p = 0.042). Furthermore, TC on the most distal tooth in an arch showed 2.4 times higher risk for failure than TC on a more mesial tooth (1.5-3.8; p < 0.001). CONCLUSION: For removable partial dentures retained by telescopic crowns, high success rates could be found after up to 12 years. Patient-level and tooth-level factors were significantly associated with failure. CLINICAL RELEVANCE: For removable partial dentures retained by telescopic crowns, high success rates could be found after up to 12 years. Patient-level and tooth-level factors were significantly associated with failure.

Multi-modal deep learning for automated assembly of periapical radiographs.

OBJECTIVES: Periapical radiographs are oftentimes taken in series to display all teeth present in the oral cavity. Our aim was to automatically assemble such a series of periapical radiographs into an anatomically correct status using a multi-modal deep learning model. METHODS: 4,707 periapical images from 387 patients (on average, 12 images per patient) were used. Radiographs were labeled according to their field of view and the dataset split into a training, validation, and test set, stratified by patient. In addition to the radiograph the timestamp of image generation was extracted and abstracted as follows: A matrix, containing the normalized timestamps of all images of a patient was constructed, representing the order in which images were taken, providing temporal context information to the deep learning model. Using the image data together with the time sequence data a multi-modal deep learning model consisting of two residual convolutional neural networks (ResNet-152 for image data, ResNet-50 for time data) was trained. Additionally, two uni-modal models were trained on image data and time data, respectively. A custom scoring technique was used to measure model performance. RESULTS: Multi-modal deep learning outperformed both uni-modal image-based learning (p<0.001) and time-based learning (p<0.05). The multi-modal deep learning model predicted tooth labels with an F1-score, sensitivity and precision of 0.79, respectively, and an accuracy of 0.99. 37 out of 77 patient datasets were fully correctly assembled by multi-modal learning; in the remaining ones, usually only one image was incorrectly labeled. CONCLUSIONS: Multi-modal modeling allowed automated assembly of periapical radiographs and outperformed both uni-modal models. Dental machine learning models can benefit from additional data modalities. CLINICAL SIGNIFICANCE: Like humans, deep learning models may profit from multiple data sources for decision-making. We demonstrate how multi-modal learning can assist assembling periapical radiographs into an anatomically correct status. Multi-modal learning should be considered for more complex tasks, as clinically a wealth of data is usually available and could be leveraged.

Evaluation of the masking efficacy of caries infiltration in post-orthodontic initial caries lesions: 1-year follow-up.

OBJECTIVES: This study aimed to qualitatively and quantitatively assess the masking efficacy and color stability of resin infiltration on post-orthodontic ICL after 1 year. MATERIALS AND METHODS: In 17 adolescents, 112 ICL (ICDAS-1: n = 1; ICDAS-2: n = 111) in 112 teeth were treated by resin infiltration (Icon, DMG) 3 to 12 months after bracket removal. The etching procedure was performed up to 3 times. Standardized digital images were taken before treatment (T0), 7 days (T7) and 12 months (T365) after treatment. Outcomes included the evaluation of the color differences between infiltrated and healthy enamel at T0, T7, and T365 by quantitative (colorimetric analysis (ΔE), ICDAS scores) and qualitative methods (5-point Likert scale (deteriorated (1), unchanged (2), improved, but not satisfying (3), improved and no further treatment required (4), completely masked (5)).) Differences between time points were analyzed by using Friedman test (ΔΕ) and chi-square tests (ICDAS). RESULTS: The median color difference (25th/75th percentiles) between carious and healthy enamel at baseline (ΔΕ0) was 10.2(7.7/13.6). A significant decrease was observed 7 days after treatment (ΔΕ7 = 3.1(1.8/5.0); p < 0.001; ICDAS; p < 0.001). No significant changes based on ΔΕ (p = 1.000), and ICDAS grade (p = 0.305) were observed between T7 and T365 (ΔΕ12 = 3.4 (1.8/4.9)). Furthermore, at T365 four experienced dentists classified 55% and 39% of the lesions as "improved and no further treatment required" and "completely masked," respectively (Fleiss kappa: T365 = 0.851 (almost perfect)). CONCLUSION: Resin infiltration efficaciously masked post-orthodontic ICL 7 days and 12 months after treatment. These results for most of the teeth could not only be observed by quantitative but also by qualitative analysis. CLINICAL RELEVANCE: Resin infiltration efficaciously masks post-orthodontic initial carious lesions. The optical improvement can be observed directly after treatment and remains stable for at least 12 months.

Artificial Intelligence for Caries Detection: Value of Data and Information.

If increasing practitioners' diagnostic accuracy, medical artificial intelligence (AI) may lead to better treatment decisions at lower costs, while uncertainty remains around the resulting cost-effectiveness. In the present study, we assessed how enlarging the data set used for training an AI for caries detection on bitewings affects cost-effectiveness and also determined the value of information by reducing the uncertainty around other input parameters (namely, the costs of AI and the population's caries risk profile). We employed a convolutional neural network and trained it on 10%, 25%, 50%, or 100% of a labeled data set containing 29,011 teeth without and 19,760 teeth with caries lesions stemming from bitewing radiographs. We employed an established health economic modeling and analytical framework to quantify cost-effectiveness and value of information. We adopted a mixed public-private payer perspective in German health care; the health outcome was tooth retention years. A Markov model, allowing to follow posterior teeth over the lifetime of an initially 12-y-old individual, and Monte Carlo microsimulations were employed. With an increasing amount of data used to train the AI sensitivity and specificity increased nonlinearly, increasing the data set from 10% to 25% had the largest impact on accuracy and, consequently, cost-effectiveness. In the base-case scenario, AI was more effective (tooth retention for a mean [2.5%-97.5%] 62.8 [59.2-65.5] y) and less costly (378 [284-499] euros) than dentists without AI (60.4 [55.8-64.4] y; 419 [270-593] euros), with considerable uncertainty. The economic value of reducing the uncertainty around AI's accuracy or costs was limited, while information on the population's risk profile was more relevant. When developing dental AI, informed choices about the data set size may be recommended, and research toward individualized application of AI for caries detection seems warranted to optimize cost-effectiveness.

Benchmarking Deep Learning Models for Tooth Structure Segmentation.

A wide range of deep learning (DL) architectures with varying depths are available, with developers usually choosing one or a few of them for their specific task in a nonsystematic way. Benchmarking (i.e., the systematic comparison of state-of-the art architectures on a specific task) may provide guidance in the model development process and may allow developers to make better decisions. However, comprehensive benchmarking has not been performed in dentistry yet. We aimed to benchmark a range of architecture designs for 1 specific, exemplary case: tooth structure segmentation on dental bitewing radiographs. We built 72 models for tooth structure (enamel, dentin, pulp, fillings, crowns) segmentation by combining 6 different DL network architectures (U-Net, U-Net++, Feature Pyramid Networks, LinkNet, Pyramid Scene Parsing Network, Mask Attention Network) with 12 encoders from 3 different encoder families (ResNet, VGG, DenseNet) of varying depth (e.g., VGG13, VGG16, VGG19). On each model design, 3 initialization strategies (ImageNet, CheXpert, random initialization) were applied, resulting overall into 216 trained models, which were trained up to 200 epochs with the Adam optimizer (learning rate = 0.0001) and a batch size of 32. Our data set consisted of 1,625 human-annotated dental bitewing radiographs. We used a 5-fold cross-validation scheme and quantified model performances primarily by the F1-score. Initialization with ImageNet or CheXpert weights significantly outperformed random initialization (P < 0.05). Deeper and more complex models did not necessarily perform better than less complex alternatives. VGG-based models were more robust across model configurations, while more complex models (e.g., from the ResNet family) achieved peak performances. In conclusion, initializing models with pretrained weights may be recommended when training models for dental radiographic analysis. Less complex model architectures may be competitive alternatives if computational resources and training time are restricting factors. Models developed and found superior on nondental data sets may not show this behavior for dental domain-specific tasks.

Efficacy of sealants and bonding materials during fixed orthodontic treatment to prevent enamel demineralization: a systematic review and meta-analysis.

To analyse clinical studies investigating coating agents such as sealants and other bonding materials to prevent the initiation or inhibit the progress of white spot lesions (WSL) during orthodontic treatment with fixed appliances. Electronic databases (Pubmed, CENTRAL, EMBASE) were screened for studies. No language restrictions were applied. Study selection, data extraction and quality assessment were done in duplicate. Primary outcome included assessment of WSL with visual-tactile assessment and/or laser fluorescence measurements. Twenty-four studies with 1117 patients (age: 11-40 years) and 12,809 teeth were included. Overall, 34 different sealants or bonding materials were analysed. Fourteen studies analysed fluoride and 14 studies non-fluoride releasing materials. Meta-analysis for visual tactile assessment revealed that sealants significantly decreased the initiation of WSL compared to untreated control (RR [95%CI] = 0.70 [0.53; 0.93]; very low level of evidence). Materials releasing fluoride did not decrease initiation of WSL compared to those with no fluoride release (RR [95%CI] = 0.84 [0.70; 1.01]; very low level of evidence). For laser fluorescence measurements no meta-analysis could be performed. The use of sealants seems to be effective in preventing the initiation of post-orthodontic WSL. Furthermore, there is no evidence supporting that fluoride-releasing sealants or bonding materials are more effective than those without fluoride release. No gold standard prevention strategy to prevent WSL during treatment with fixed orthodontic appliances has been established yet. However, based on only a limited number of studies the use of sealants seems to be effective in preventing the initiation of post-orthodontic WSL.

Proximal caries infiltration - Pragmatic RCT with 4 years of follow-up.

OBJECTIVES: Efficacy of proximal caries infiltration to arrest lesion progression has been shown in university settings, but only once in a practice-based pragmatic design with a follow-up of 18 months. The aim of this randomized split-mouth placebo-controlled study was to follow-up this cohort for 3 years and those with high caries risk for 4 years. METHODS: Originally, in 87 children and young adults pairs of 238 proximal caries lesions, radiographically extending into inner half of enamel (E2) or outer third of dentin (D1), were randomly allocated to two groups: infiltration (Icon; DMG) or mock (control) treatment by five dentists in four private practices. All subjects received risk-related instructions for diet, flossing and fluoridation. The primary outcome was radiographic lesion progression (pairwise comparison) evaluated by two evaluators independently being blinded to treatment allocation. RESULTS: After 36 months [mean (SD): 1152 (166) days] 165 lesion pairs in 64 patients as well as after 48 months [mean (SD): 1496 (121) days] 71 lesion pairs in 20 high caries risk patients could be re-evaluated clinically as well as radiographically using individualized bitewing holders as at baseline. No adverse events could be observed. After 36 months, progression was recorded in 23/165 test (14%) and 64/165 control lesions (39%) [McNemar/Obuchowski test; p<0.001; relative risk reduction (CI95%): 64 (45-77%)]. After 48 months lesion progression was recorded in 13/71 test (18%) and 34/71 control lesions (48%) [p = 0.003; relative risk reduction (CI95%): 62 (34-78%)] of high caries risk patients. CONCLUSIONS: It can be concluded that also in a practice-setting proximal caries infiltration is more efficacious in reducing lesion progression compared with individualized non-invasive measures alone over a period of four years.

A prospective, multi-center, practice-based cohort study on all-ceramic crowns.

OBJECTIVES: The aim of this prospective, multi-center, practice-based cohort study was to analyze factors associated with the success of all-ceramic crowns. METHODS: All-ceramic crowns placed in a practice-based research network ([Ceramic Success Analysis, AG Keramik) were analyzed. Data from 1254 patients with (mostly in-office CAD/CAM) all-ceramic crowns placed by 101 dentists being followed up for more than 5 years were evaluated. At the last follow-up visit crowns were considered as successful (not failed) if they were sufficient, whereas crowns were considered as survived (not lost) if they were still in function. Multi-level Cox proportional hazards models were used to evaluate the association between a range of predictors and time of success or survival. RESULTS: Within a mean follow-up period (SD) of 7.2(2)years [maximum:15years] 776 crowns were considered successful (annual failure rate[AFR]:8.4%) and 1041 crowns survived (AFR:4.9%). The presence of a post in endodontically treated teeth resulted in a risk for failure 2.7 times lower than that of restorations without a post (95%CI:1.4-5.0;p = 0.002). Regarding the restorative material and adhesive technique, hybrid composite ceramics and single-step adhesives showed a 3.4 and 2.2 times higher failure rate than feldspathic porcelain and multi-step adhesives, respectively (p < 0.001). Use of an oxygen-blocking gel as well as an EVA instrument resulted in a 1.5-1.8 times higher failure rate than their non-use (p ≤ 0.001). SIGNIFICANCE: After up to 15years AFR were rather high for all-ceramic crowns. Operative factors, but no patient- or tooth-level factors were significantly associated with failure. The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00020271).

Longevity of immediate rehabilitation with direct fiber reinforced composite fixed partial dentures after up to 9 years.

OBJECTIVES: This retrospective, single-center, practice-based cohort study aimed to analyze the longevity of direct fiber reinforced composite fixed partial dentures (DFRC-FPD) and to analyze factors influencing their survival and success. METHODS: Within one private practice 100 DFRC-FPD were directly applied. The preparation of a proximal cavity was limited to abutment teeth with an existing filling (minimal-invasive approach). All intact enamel surfaces were preserved (micro-invasive approach). DFRC-FPD were reinforced by fiber-splints with semi polymer network matrices (Everstick C + B©). At the last follow-up DFRC-FPD were considered successful if they were still in function without any need of therapy. DFRC-FPD were considered as survived if they were repaired or replaced. Multi-level Cox proportional hazard models were used to evaluate the association between clinical factors and time. RESULTS: Within a mean follow-up period (range) of 53 (2-109) months 7 bridges did not survive (cumulative survival rate: 93%) and further 24 bridges had received a restorative follow-up treatment (cumulative success rate: 69%). The annual failure rate was 1.6% for survival and 8.3% for success. The main failure type was fracture of the composite material (n = 30). In multivariate analysis no significant predictor could be found for success and survival. CONCLUSIONS: For directly prepared fiber reinforced composite bridges high survival and moderate success times were observed after up to nine years. Based on the present results DFRC-FPD might be an immediate, short- to medium-term solution for replacing 1 to 2 missing teeth with no or minimal tooth preparation. CLINICAL SIGNIFICANCE: Within the limitations of the present study DFRC-FPD offered an immediate, micro-/minimal-invasive, inexpensive short- and medium-term solution to replace missing teeth, even if no box-shaped proximal cavity was prepared.

Risk Factors for Failure of Direct Restorations in General Dental Practices.

The aim of this retrospective noninterventional multicenter practice-based study was to analyze factors influencing the survival of direct restorations. Records from patients who visited 5 private practices regularly were searched for the presence of direct restorations. Data were recorded from 7,858 patients with 27,407 direct restorations being detected at least 6 mo before the last recall visit. Multilevel Cox proportional hazard models were used to evaluate the association between clinical factors and time until failure. Within 228 mo, 5,493 failures could be observed. Median survival time was 207 mo. The annual failure rates were 3.8%, 4.0%, 4.6%, 4.9%, and 3.9% for class I, II, III, IV, and V restorations, respectively. Class II and IV restorations showed a 1.1-times (95% CI, 1.0 to 1.2) and 1.2-times (95% CI, 1.1 to 1.2) higher failure rate than class I restorations (P ≤ 0.029). Patients aged <20 y and >60 y showed up to a 1.4-times higher failure rate than patients aged 20 to 60 y (P ≤ 0.015). Restorations that underwent check-up twice a year or more showed a significantly higher failure rate than those that did so less than twice a year (P < 0.001). Furthermore, the dentists significantly influenced time until failure (P < 0.001). Regarding the restorative material, composites showed up to a 2.1-times longer time until failure than GIC (P ≤ 0.020). Moderate failure rates were observed for direct restorations in the private practice setting after up to 18.5 y. Within the limitations of the present study, several factors on the levels of practice (i.e., dentist), patient (i.e., age), and tooth (i.e., restorative material, restored surfaces according to the classification of Black) were significant predictors for the failure rate. Therefore, treatment decision should take into account most relevant factors (German Clinical Trials Register DRKS00015228).

Re- and demineralization characteristics of dentin depending on fluoride application and baseline characteristics in situ.

OBJECTIVES: The aim of this double-blinded, randomized, cross-over in situ study was to evaluate the re- and demineralization characteristics of sound dentin as well as highly and lowly demineralized dentin after the application of different fluoride concentrations. METHODS: In each of four experimental legs of four weeks 20 participants wore intraoral mandibular appliances containing two (highly demineralized [EH]) bovine enamel and four (lowly and highly demineralized [DL,DH]) bovine dentin specimens (n = 480). Each specimen included one sound (ST) and one demineralized lesion area (DT). The four randomly allocated treatments included the following dentifrices: fluoride-free, zinc-carbonate-nano-hydroxyapatite [nHA0], 0 ppm F- [negative control,NaF0], 1100 ppm F- as NaF [standard therapy,NaF1100] and 5000 ppm F- as NaF [positive control,NaF5000]. Differences in integrated mineral loss (ΔΔZ) and lesion depth (ΔLD) were calculated between values before and after the in situ period using transversal microradiography. RESULTS: After the in situ period specimens of nHA0 and NaF0 showed signs of demineralization, indicated by significantly lower ΔZ&LD values for EH and DL (only nHA0)(p ≤ 0.028), whereas specimens of NaF1100 and NaF5000 showed signs of remineralization, indicated by significantly higher ΔZ values for EH (only NaF5000), DL and DH (p ≤ 0.012). The correlation between ΔΔZDT/ΔΔZST and F- was moderate for EH(rDT = 0.497;rST = 0.463) and DL(rDT = 0.575;rST = 0.598) and strong for DH(rDH = 0.700;rST = 0.611)(p < 0.001). No significant differences for ΔΔZDT/ΔΔZST were observed between nHA0 and NaF0(p ≥ 0.333;ANCOVA). CONCLUSION: The present in situ model was capable to reveal a fluoride dose-response on sound, lowly and highly demineralized dentin and also enamel specimens. Furthermore, both fluoride-free dentifrices, one containing nanohydroxyapatite, did not hamper demineralization. CLINICAL SIGNIFICANCE: The present in situ model was capable to reveal a fluoride dose-response on dentin similar to the anticipated clinical efficacy. Highly demineralized specimens seem to be recommendable for measuring anti-caries effects on dentin in situ. Furthermore both fluoride-free dentifrices, one containing nanohydroxyapatite, did not hamper demineralization. The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00011653).

Seven-year-efficacy of proximal caries infiltration - Randomized clinical trial.

OBJECTIVES: We report efficacy of resin infiltration to arrest progression of caries lesions as compared with non-invasive measures and oral hygiene education alone after a mean observation time of seven years. MATERIALS AND METHODS: This randomized split-mouth placebo-controlled clinical trial included 22 young adults having 29 pairs of interproximal non-cavitated caries lesions with radiographic extensions into inner half of enamel (E2) or outer third of dentin (D1). Lesion pairs were randomly allocated to two treatment groups: infiltration (Icon, pre-product; DMG) or mock (control) treatment. All subjects received risk-related instructions for diet, flossing and fluoridation. The primary outcome was radiographic (digital subtraction radiography) lesion progression after seven years. Secondly, Kaplan-Meier-analyses were applied to analyze time-to-failure additionally including patients followed up for less than 54 months as well. RESULTS: Two lesion pairs were excluded due to invasive treatment decision by another dentist, five lesion pairs were lost to follow-up prior to 54 months but included in the survival analysis. No unwanted effects could be observed. For the primary outcome in 17 patients followed up in mean for 84 months 2/22 infiltrated lesions (9 %) compared with 10/22 control lesions (45 %) progressed (p = 0.018). The relative risk reduction for test in relation to control was 80 % (CI 95 % = 19-95 %). For the survival analysis within a mean (SD) observation time of 73 (25) months mean failure rates of 1.3 % and 7.8 % could be observed for test and controls, respectively. Hazard risk (95 % CI) for caries progression was 6.6 (2-22) for the control compared with the test lesions (p = 0.002). CONCLUSIONS: We conclude that resin infiltration of proximal caries lesions extending radiographically around the enamel dentin junction is efficacious to reduce lesion progression after a mean observation time of seven years. CLINICAL SIGNIFICANCE: This randomized clinical trial proves that caries infiltration is highly efficacious compared with non-invasive measures and oral hygiene education alone after a considerably longer observation time of 7 years than studied so far before.

Evaluation of the value of re-wetting prior to resin infiltration of post-orthodontic caries lesions.

OBJECTIVES: Assessment of the influence of colour changes during the re-wetting process as a possible predictor for the final result after resin infiltration to mask post-orthodontic white spot lesions. MATERIALS AND METHODS: Resin infiltration (ICON; DMG, Hamburg, Germany) was performed according to the manufacturer's recommendation with the exception of repeated, at maximum three etching procedures based on the subjective decision of the dentist during a so called re-wetting process using ethanol. The masking effect by ethanol as well as after resin infiltration was evaluated by digital images taken before, for nine seconds during re-wetting and one week after treatment using CIE L*a*b* colour space. RESULTS: Twenty-nine patients (16 female) with a total of 221 lesions (ICDAS 2) were included (mean age 16 years). Mean time after debonding the orthodontic appliances was ten weeks. Colour changes during re-wetting, evaluated in the first ten patients (71 lesions) showed a significant correlation between the minimum ΔE observed during re-wetting and the final ΔE after resin infiltration (r = 0.65, p < 0.001; Spearman correlation). The main drop in ΔE becomes visible after three seconds when performing the re-wetting process. Regarding the 221 lesions, resin infiltration significantly reduced the colour difference between sound and lesion areas from a baseline ΔE (25th/75th percentiles) of 10.9 (8.2/13.2) to a ΔE of 4 (2.1/5.8) after one week (p < 0.001). The number of etching procedures correlated significantly with baseline ΔE (p < 0.05). CONCLUSIONS: The minimum ΔE observed during the re-wetting process seems to be a useful predictor for the final result of resin infiltration of post-orthodontic caries lesions. More prominent lesions with higher ΔE at baseline seem to require more erosion of the surface layer. In general, a significant and considerable clinical reduction of ΔE could be observed. CLINICAL SIGNIFICANCE: We corroborate that resin infiltration technique is a very useful method to mask caries lesions having developed during treatment with fixed orthodontic appliances. Colour changes while re-wetting the lesions with ethanol seem to be a valuable indicator for the number of required etching procedures.

Accuracy of tactile assessment in order to detect proximal cavitation of caries lesions in vitro.

OBJECTIVES: Discriminating non-cavitated from cavitated proximal lesions without tooth separation is only limitedly possible using visual-radiographic assessment alone. We evaluated how additional tactile assessment might increase the accuracy of this discrimination in vitro. METHODS: Surface integrity of 46 primary molars with proximal lesions extending radiographically into outer third of dentin (ICDAS-codes: 2 n = 34, 3 n = 8 and 5 n = 4) were mounted in groups of two in manikin heads and independently assessed by three examiners using visual-radiographic and additional tactile assessment using a cow-horn-ended explorer with or without gingival displacement. After examination, lesion surfaces were evaluated for possible damage using scanning-electronic microscopy. Analysis of variance (ANOVA) was performed for evaluating if tactile assessment and gingival displacement significantly affected accuracy. RESULTS: Tactile assessment significantly increased sensitivity of detecting cavities (p < 0.001, ANOVA), but decreased specificity (p < 0.05). Sensitivities/specificities varied between 33 (8)%/96 (1)% and 86 (6)%/84 (5)%. Gingival displacement had no significant impact on accuracy (p > 0.05). Scanning-electron microscopy revealed no cavitation. CONCLUSIONS: In vitro, tactile assessment of proximal surfaces was useful and safe. CLINICAL RELEVANCE: Analysis of the cavitation level by using a cow-horn-ended probe might be leading to useful information in addition to bitewing assessment under clinical circumstances.

Randomized in situ study on the efficacy of CO2 laser irradiation in increasing enamel erosion resistance.

OBJECTIVES: The aim of this double-blind, randomized in situ study was to evaluate the erosion-preventive effect of a specific set of CO2 laser parameters, associated or not with fluoride. METHODS: Two hundred forty bovine enamel blocks were prepared for individual palatal appliances (n = 6 samples/appliance). The study had four phases of 5 days each, with ten volunteers and the following treatments: CO2 laser irradiation (L), fluoride treatment (F), combined fluoride and laser treatment (FL), and no treatment, control (C). Laser irradiation was performed at 0.3 J/cm2 (5 µs/226 Hz/10.6 µm) and the fluoride gel contained AmF/NaF (12'500 ppm F-/pH = 4.8-6). For erosive demineralization, the appliances were immersed extra-orally in citric acid (0.05 M/20 min/pH = 2.3) twice daily. Analysis of enamel surface loss was done using a 3D-laser profilometer on 3 days. Additionally, fluoride uptake was quantified and scanning electron microscopies were done. Data were analyzed with repeated measures ANOVA and post hoc pairwise comparisons (α = 0.05). RESULTS: At all analyzing days, both laser groups caused the lowest means of enamel loss, which were also statistically significant lower than C (p < 0.05). At day 5, FL means ± SD (33.6 ± 12.6 µm) were even significantly lower than all other groups (C 67.8 ± 15.4 µm; F 57.5 ± 20.3 µm; L 46.8 ± 14.5 µm). Significantly increased enamel fluoride uptake was observed for both fluoride-containing groups (p < 0.05) at day 1. CONCLUSION: Compared to the control, the CO2 laser irradiation with a specific set of laser parameters (0.3 J/cm2/5 µs/226 Hz) either alone or in combination with a fluoride gel (AmF/NaF) could significantly decrease enamel erosive loss up to 5 days in situ. CLINICAL RELEVANCE: Combined CO2 laser-fluoride treatment has a significant anti-erosive effect.

Success and survival of post-restorations: six-year results of a prospective observational practice-based clinical study.

AIM: This prospective, noninterventional, multi-centre, practice-based study aimed to evaluate the longevity of endodontically treated teeth (ETT) restored with posts and to analyse factors influencing the success and survival of endodontic posts. METHODOLOGY: Eight general dental practitioners each placed up to 27 endodontic posts without any restriction to size and material. Teeth were restricted to incisors, canines and premolars. Multi-level Cox proportional hazards models were used to evaluate the association between clinical factors and time until failure. RESULTS: A total of 195 endodontic posts were followed-up for up to 6.5 years in 195 patients. Of these, 140 posts were judged as successful [mean success time: 59 (55-63) months]; the mean annual failure rate was 8.6%. This decreased to 4.4% when excluding recementations. 152 posts survived [mean survival time: 64 (60-67) months]. Recemented restorations had an eight times higher failure rate compared with new restorations. Furthermore, restorations with glass fibre post had a significantly lower success rate compared with titanium posts. CONCLUSION: Relatively low success and survival rates occurred for restorations with posts after root canal treatment in a private practice setting after a follow-up of up to 6.5 years. Recemented crowns had a high risk of failure.

Longevity of composite build-ups without posts-10-year results of a practice-based study.

AIM: The aim of this prospective, non-interventional, multi-center, practice-based study was, firstly, to evaluate the longevity of composite build-ups in endodontically treated teeth (ETT) without post placement and, secondly, to analyze factors influencing the success of these composite build-ups. METHODOLOGY: Each of seven general dental practitioners placed up to 50 composite build-ups without additional posts in ETT. Teeth were restricted to incisors, canines, and premolars. Several clinical data were recorded for 192 coronal restorations on ETT in 192 patients. Cox proportional hazard models were applied to analyze associations between clinical factors and time until failure. RESULTS: Within a follow-up period of 10 years, 167 restorations were judged as successful [mean success time, 110 (105-115) months] and 180 teeth survived [mean survival time, 114 (110-119) months]. The main failure type was fracture of the restoration (n = 15). The annual failure rate was 2.4%. In bivariate Cox regression, both factors such as number of restored tooth surfaces and adhesive were significantly associated with the failure rate. In multivariate Cox proportional hazards regression, none of the investigated factors were significantly associated with the failure rate. CONCLUSION: For composite build-ups in ETT without post placement, high success rates could be found after up to 10 years of observation time. Within the limitations of the present study, none of the analyzed factors such as "tooth type" or "number of restored tooth surfaces" was a significant predictor for the failure rate. CLINICAL RELEVANCE: Endodontically treated teeth can be successfully directly restored with composite build-ups even when no additional post is inserted. TRIAL REGISTRATION: The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00012882).

Risk factors for failure of class V restorations of carious cervical lesions in general dental practices.

OBJECTIVES: The aim of this retrospective, non-interventional, multi-center, practice-based study was to analyze factors influencing the survival of restorative treatments of one- and two-surface active cervical (root) caries lesions (CCLs). METHODS: Records from patients who visited five private practices regularly were searched for the presence of active one- and two-surface CCLs. Data from 1167 patients with 2070 CCLs being detected at least 6 months before the last recall visit were recorded. Kaplan-Meier-analyses were used to analyze time-to-failure. Cox proportional hazards models were used to evaluate the association between clinical factors and time until failure. RESULTS: Within 120 months [mean (SD) follow-up period:50 (40) months] 219 failures could be observed. Median survival time was 120 months. The AFR was 1.82% for one-surface restorations (CCL1) and 3.25% for two-surface restorations (CCL2). In multivariate Cox regression two-surface cervical restorations showed 1.75 times higher failure rates than one-surface cervical restoration. Furthermore, CCL being checked up more than twice a year showed significantly higher failure rates than restorations being checked up less than twice a year (p < 0.001). CONCLUSION: Low failure rates could be found for restorative treatment strategies of one- as well as for two-surface CCLs. CLINICAL SIGNIFICANCE: Restorative treatment of CCLs is a viable way to manage one-surface CCLs. However, the proximal extension of the CCL significantly shortens the longevity of the restoration. The study was registered in the German Clinical Trials Register (DRKS-ID: DRKS00012510).