In vivo axial load-share ratio measurement using a novel hexapod system for safe external fixator removal.

BACKGROUND: External fixation is widely used in the treatment of traumatic fractures; however, orthopedic surgeons encounter challenges in deciding the optimal time for fixator removal. The axial load-share ratio (LS) of the fixator is a quantitative index to evaluate the stiffness of callus healing. This paper introduces an innovative method for measuring the LS and assesses the method's feasibility and efficacy. Based on a novel hexapod LS-measurement system, the proposed method is to improve the convenience and precision of measuring LS in vivo, hence facilitating the safe removal of external fixators. METHODS: A novel hexapod system is introduced, including its composition, theoretical model, and method for LS measurement. We conducted a retrospective study on 82 patients with tibial fractures treated by the Taylor Spatial Frame in our hospital from September 2018 to June 2020, of which 35 took LS measurements with our novel method (Group I), and 47 were with the traditional method (Group II). The external fixator was removed when the measurement outcome (LS < 10%) was consistent with the surgeon's diagnosis based on the clinical and radiological assessment (bone union achieved). RESULTS: No significant difference was found in the fracture healing time (mean 25.3 weeks vs. 24.9 weeks, P > 0.05), frame-wearing duration (mean 25.5 weeks vs. 25.8 weeks, P > 0.05), or LS measurement frequency (mean 1.1 times vs. 1.2 times, P > 0.05). The measurement system installation time in Group I was significantly shorter compared to Group II (mean 14.8 min vs. 81.3 min, P < 0.001). The LS value of the first measurement in Group I was lower than that of Group II (mean 5.1% vs. 6.9%, P = 0.011). In Group I, the refracture rate was 0, but in Group II it was 4.3% (2/47, P > 0.05). CONCLUSION: The novel hexapod LS-measurement system and involved method demonstrated enhanced convenience and precision in measuring the LS of the external fixator in vivo. The LS measurement indicates the callus stiffness of fracture healing, and is applicable to evaluate the safety of removing the fixator. Consequently, it is highly recommended for widespread adoption in clinical practice.

Decoding Active Sites for Highly Efficient Semihydrogenation of Acetylene in Palladium-Copper Nanoalloys.

Accurately decoding the three-dimensional atomic structure of surface active sites is essential yet challenging for a rational catalyst design. Here, we used comprehensive techniques combining the pair distribution function and reverse Monte Carlo simulation to reveal the surficial distribution of Pd active sites and adjacent coordination environment in palladium-copper nanoalloys. After the fine-tuning of the atomic arrangement, excellent catalytic performance with 98% ethylene selectivity at complete acetylene conversion was obtained in the Pd34Cu66 nanocatalysts, outperforming most of the reported advanced catalysts. The quantitative deciphering shows a large number of active sites with a Pd-Pd coordination number of 3 distributed on the surface of Pd34Cu66 nanoalloys, which play a decisive role in highly efficient semihydrogenation. This finding not only opens the way for guiding the precise design of bimetal nanocatalysts from atomic-level insight but also provides a method to resolve the spatial structure of active sites.

The DEAD-box RNA helicase PfDOZI imposes opposing actions on RNA metabolism in Plasmodium falciparum.

In malaria parasites, the regulation of mRNA translation, storage and degradation during development and life-stage transitions remains largely unknown. Here, we functionally characterized the DEAD-box RNA helicase PfDOZI in P. falciparum. Disruption of pfdozi enhanced asexual proliferation but reduced sexual commitment and impaired gametocyte development. By quantitative transcriptomics, we show that PfDOZI is involved in the regulation of invasion-related genes and sexual stage-specific genes during different developmental stages. PfDOZI predominantly participates in processing body-like mRNPs in schizonts but germ cell granule-like mRNPs in gametocytes to impose opposing actions of degradation and protection on different mRNA targets. We further show the formation of stress granule-like mRNPs during nutritional deprivation, highlighting an essential role of PfDOZI-associated mRNPs in stress response. We demonstrate that PfDOZI participates in distinct mRNPs to maintain mRNA homeostasis in response to life-stage transition and environmental changes by differentially executing post-transcriptional regulation on the target mRNAs.

The effects of acteoside on locomotor recovery after spinal cord injury - The role of autophagy and apoptosis signaling pathway.

In the current study, we investigated the effects of acteoside as a phenylpropanoid glycoside on interaction with neurons to assesses locomotor recovery after spinal cord injury (SCI) in rats by focusing on evaluating the factors involved in autophagy, apoptosis, inflammation and oxidative stress processes. 49 Spargue-Dawley rats were prepared and divided into seven healthy and SCI groups receiving different concentrations of acteoside. After 28 days of disease induction and treatment with acteoside, a BBB score test was used to evaluate locomotor activity. Then, by preparing spinal cord cell homogenates, the expression levels of MAP1LC3A, MAP-2, glial fibrillary acidic protein (GFAP), Nrf2, Keap-1, Caspase 3 (Casp3), Bax, Bcl-2, TNF-a, IL-1B, reactive oxygen species (ROS), and malondialdehyde (MDA) were measured. Improvement of locomotor activity in SCI rats receiving acteoside was observed two weeks after the beginning of the experiment and continued until the fourth week. Both MAP1LC3A and MAP-2 were significantly up-regulated in SCI rats treated with acteoside compared to untreated SCI rats, and GFAP levels were significantly decreased in these animals. Pro-apoptotic proteins Bax and Casp3 and anti-apoptotic protein Bcl-2 were down-regulated and up-regulated, respectively, in SCI rats receiving acteoside. In addition, a significant downregulation of iNOS, TNF-α, and IL-1ß and a decrease in contents of both ROS and MDA as well as increases in Nrf2 and Keap-1 were seen in rats receiving acteoside. Furthermore, acteoside strongly interacted with MAP1LC3A, TNF-α, and Casp3 targets with binding affinities of -8.3 kcal/mol, -8.3 kcal/mol, and -8.5 kcal/mol, respectively, determined by molecular docking studies. In general, it can be concluded that acteoside has protective effects in SCI and can be considered as an adjuvant therapy in the treatment of this disease. However, more studies, especially clinical studies, are needed in this field.

A near-infrared fluorescent probe based FRET for ratiometric sensing of H2O2 and viscosity in live cells.

Hydrogen peroxide (H2O2) and viscosity play vital roles in the cellular environment as signaling molecule and microenvironment parameter, respectively, and are associated with many physiological and pathological processes in biological systems. We developed a near-infrared fluorescent probe, CQ, which performed colorimetric and ratiometric detection of H2O2 and viscosity based on the FRET mechanism, and was capable of monitoring changes in viscosity and H2O2 levels simultaneously through two different channels. Based on the specific reaction of H2O2 with borate ester, CQ exhibited a significant ratiometric response to H2O2 with a large Stokes shift of 221 nm, a detection limit of 0.87 µM, a near-infrared emission wavelength of 671 nm, a response time of 1 h, a wide detection ranges of 0.87-800 µM and a high energy transfer efficiency of 99.9 %. CQ could also recognize viscosity by the TICT mechanism, and efficiently detect viscosity changes caused by food thickeners. More importantly, CQ could successfully detect endogenous/exogenous H2O2 and viscosity in live HeLa cells, which was expected to be a practical tool for detecting H2O2 and viscosity in live cells.

MYST regulates DNA repair and forms a NuA4-like complex in the malaria parasite Plasmodium falciparum.

Histone lysine acetyltransferase MYST-associated NuA4 complex is conserved from yeast to humans and plays key roles in cell cycle regulation, gene transcription, and DNA replication/repair. Here, we identified a Plasmodium falciparum MYST-associated complex, PfNuA4, which contains 11 of the 13 conserved NuA4 subunits. Reciprocal pulldowns using PfEAF2, a shared component between the NuA4 and SWR1 complexes, not only confirmed the PfNuA4 complex but also identified the PfSWR1 complex, a histone remodeling complex, although their identities are low compared to the homologs in yeast or humans. Notably, both H2A.Z/H2B.Z were associated with the PfSWR1 complex, indicating that this complex is involved in the deposition of H2A.Z/H2B.Z, the variant histone pair that is enriched in the activated promoters. Overexpression of PfMYST resulted in earlier expression of genes involved in cell cycle regulation, DNA replication, and merozoite invasion, and upregulation of the genes related to antigenic variation and DNA repair. Consistently, PfMYST overexpression led to high basal phosphorylated PfH2A (γ-PfH2A), the mark of DNA double-strand breaks, and conferred protection against genotoxic agent methyl methanesulfonate (MMS), X-rays, and artemisinin, the first-line antimalarial drug. In contrast, the knockdown of PfMYST caused a delayed parasite recovery upon MMS treatment. MMS induced the gradual disappearance of PfMYST in the cytoplasm and concomitant accumulation of PfMYST in the nucleus, suggesting cytoplasm-nucleus shuttling of PfMYST. Meanwhile, PfMYST colocalized with the γ-PfH2A, indicating PfMYST was recruited to the DNA damage sites. Collectively, PfMYST plays critical roles in cell cycle regulation, gene transcription, and DNA replication/DNA repair in this low-branching parasitic protist.IMPORTANCEUnderstanding gene regulation and DNA repair in malaria parasites is critical for identifying targets for antimalarials. This study found PfNuA4, a PfMYST-associated, histone modifier complex, and PfSWR1, a chromatin remodeling complex in malaria parasite Plasmodium falciparum. These complexes are divergent due to the low identities compared to their homologs from yeast and humans. Furthermore, overexpression of PfMYST resulted in substantial transcriptomic changes, indicating that PfMYST is involved in regulating the cell cycle, antigenic variation, and DNA replication/repair. Consistently, PfMYST was found to protect against DNA damage caused by the genotoxic agent methyl methanesulfonate, X-rays, and artemisinin, the first-line antimalarial drug. Additionally, DNA damage led to the relocation of cytoplasmic PfMYST to the nucleus and colocalization of PfMYST with γ-PfH2A, the mark of DNA damage. In summary, this study demonstrated that the PfMYST complex has critical functions in regulating cell cycle, antigenic variation, and DNA replication/DNA repair in P. falciparum.

Transforming the CRISPR/dCas9-based gene regulation technique into a forward screening tool in Plasmodium falciparum.

It is a significant challenge to assess the functions of many uncharacterized genes in human malaria parasites. Here, we present a genetic screening tool to assess the contribution of essential genes from Plasmodium falciparum by the conditional CRISPR-/deadCas9-based interference and activation (i/a) systems. We screened both CRISPRi and CRISPRa sets, consisting of nine parasite lines per set targeting nine genes via their respective gRNAs. By conducting amplicon sequencing of gRNA loci, we identified the contribution of each targeted gene to parasite fitness upon drug (artemisinin, chloroquine) and stress (starvation, heat shock) treatment. The screening was highly reproducible, and the screening libraries were easily generated by transfection of mixed plasmids expressing different gRNAs. We demonstrated that this screening is straightforward, robust, and can provide a fast and efficient tool to study essential genes that have long presented a bottleneck in assessing their functions using existing genetic tools.

The role of the paraspinal muscles in the development of adolescent idiopathic scoliosis based on surface electromyography and radiographic analysis.

BACKGROUND: Patients with idiopathic scoliosis commonly present with an imbalance of the paraspinal muscles. However, it is unclear whether this muscle imbalance is an underlying cause or a result of idiopathic scoliosis. This study aimed to investigate the role of paraspinal muscles in the development of idiopathic scoliosis based on surface electromyography (sEMG) and radiographic analyses. METHODS: This was a single-center prospective study of 27 patients with single-curve idiopathic scoliosis. Posteroanterior whole-spine radiographs and sEMG activity of the erector spinae muscles were obtained for all patients in the habitual standing position (HSP), relaxed prone position (RPP), and prone extension position (PEP). The Cobb angle, symmetrical index (SI) of the sEMG activity (convex/concave), and correlation between the two factors were analyzed. RESULTS: In the total cohort, the mean Cobb angle in the HSP was significantly greater than the mean Cobb angle in the RPP (RPP-Cobb) (p < 0.001), whereas the mean Cobb angle in the PEP (PEP-Cobb) did not differ from the RPP-Cobb. Thirteen patients had a PEP-Cobb that was significantly smaller than their RPP-Cobb (p = 0.007), while 14 patients had a PEP-Cobb that was significantly larger than their RPP-Cobb (p < 0.001). In the total cohort and two subgroups, the SI of sEMG activity at the apex vertebra (AVSI) in the PEP was significantly greater than 1, revealing significant asymmetry, and was also significantly larger than the AVSI in the RPP. In the RPP, the AVSI was close to 1 in the total cohort and two subgroups, revealing no significant asymmetry. CONCLUSION: The coronal Cobb angle and the SI of paraspinal muscle activity in AIS patients vary with posture changes. Asymmetrical sEMG activity of the paraspinal muscles may be not an inherent feature of AIS patients, but is evident in the challenging tasks. The potential significance of asymmetric paraspinal muscle activity need to be explored in further research.

Expert consensus on Prospective Precision Diagnosis and Treatment Strategies for Osteoporotic Fractures.

Osteoporotic fractures are the most severe complications of osteoporosis, characterized by poor bone quality, difficult realignment and fixation, slow fracture healing, and a high risk of recurrence. Clinically managing these fractures is relatively challenging, and in the context of rapid aging, they pose significant social hazards. The rapid advancement of disciplines such as biophysics and biochemistry brings new opportunities for future medical diagnosis and treatment. However, there has been limited attention to precision diagnosis and treatment strategies for osteoporotic fractures both domestically and internationally. In response to this, the Chinese Medical Association Orthopaedic Branch Youth Osteoporosis Group, Chinese Geriatrics Society Geriatric Orthopaedics Committee, Chinese Medical Doctor Association Orthopaedic Physicians Branch Youth Committee Osteoporosis Group, and Shanghai Association of Integrated Traditional Chinese and Western Medicine Osteoporosis Professional Committee have collaborated to develop this consensus. It aims to elucidate emerging technologies that may play a pivotal role in both diagnosis and treatment, advocating for clinicians to embrace interdisciplinary approaches and incorporate these new technologies into their practice. Ultimately, the goal is to improve the prognosis and quality of life for elderly patients with osteoporotic fractures.

Finite element analysis of different pedicle screw internal fixations for first lumbar vertebral fracture in different sports conditions.

OBJECTIVE: Lumbar fractures are the most common spinal injuries, and surgery is required for severe fracture. This study aimed to investigate the variations in motion and stress in varying states of activity after minimally invasive and traditional open pedicle screw placement for L1 vertebral fracture stabilization. METHODS: We studied a male volunteer (26 years old) with no history of chronic back pain or lumbar spine trauma. We used the finite element method for this investigation. Using finite element software, we created a three-dimensional model of L1 vertebral compression fracture. We also constructed models for four percutaneous pedicle screws spanning the fractured vertebra and four screws traversing the damaged vertebra with transverse fixation. RESULTS: In all three-dimensional movement directions, the open pedicle fixation system experienced maximum stress higher than its percutaneous counterpart. With axial spinal rotation, von Mises stress on the traditional open pedicle screw was considerably lower than that with percutaneous pedicle fixation, but peak stress was elevated at the transverse connection. Traditional open pedicle fixation displayed less maximum displacement than percutaneous pedicle internal fixation. CONCLUSIONS: During axial spinal movements, high peak stress is observed at the transverse connection. Patients should avoid excessive axial rotation of the spine during recovery.

Epilepsy EEG signals classification based on sparse principal component logistic regression model.

Epilepsy is a chronic brain disease caused by excessive discharge of brain neurons. Long-term recurrent seizures bring a lot of trouble to patients and their families. Prediction of different stages of epilepsy is of great significance. We extract pearson correlation coefficients (PCC) between channels in different frequency bands as features of EEG signals for epilepsy stages prediction. However, the features are of large feature dimension and serious multi-collinearity. To eliminate these adverse influence, the combination of traditional dimension reduction method principal component analysis (PCA) and logistic regression method with regularization term is proposed to avoid over-fitting and achieve the feature sparsity. The experiments are conducted on the widely used CHB-MIT dataset using different regularization terms L1 and L2, respectively. The proposed method identifies various stages of epilepsy quickly and efficiently, and it presents the best average accuracy of 94.86%, average precision of 96.71%, average recall of 93.48%, average kappa value of 0.90 and average Matthews correlation coefficient (MCC) value of 0.90 for all patients.

Efficacy of traditional Chinese medicine containing hawthorn for hyperlipidemia: a systematic review and meta-analysis.

The traditional Chinese herb hawthorn is gaining attention for its potential to lower lipid levels due to its active components that positively influence lipid metabolism. Our meta-analysis of fourteen randomized controlled trials compared traditional Chinese medicine containing hawthorn with conventional lipid-lowering drugs for hyperlipidemia. Hawthorn-based medicine showed promise in reducing total cholesterol and triglycerides while increasing high-density lipoprotein cholesterol levels, albeit less effective than standard drugs in lowering low-density lipoprotein cholesterol. However, caution is needed due to methodological limitations in some trials, emphasizing the importance of further well-designed studies to clarify hawthorn's efficacy in managing hyperlipidemia.

OGG1 prevents atherosclerosis-induced vascular endothelial cell injury through mediating DNA damage repair.

OBJECTIVE: This study was designed to investigate the role of 8-oxoguanine DNA glycosylase 1 (OGG1) in preventing atherosclerosis-induced vascular EC injury, thereby providing a theoretical basis for the exploration of drug targets and treatment methods for atherosclerosis. METHODS: Human umbilical vein cell line (EA.hy926) was treated with ox-LDL to construct an in vitro atherosclerotic cell model. pcDNA3.1-OGG1 was transfected into EA.hy926 cells to overexpress OGG1. qRT-PCR, CCK-8 assay, flow cytometry, oil red O staining, ELISA, comet assay and western blot were used to evaluate the OGG1 expression, viability, apoptosis level, lipid droplet content, 8-OHdG level and DNA damage of cells in each group. RESULTS: Compared with the Control group, ox-LDL stimulation of endothelial cells significantly decreased cell viability, promoted apoptosis and DNA damage, and increased intracellular levels of 8-OHdG and γH2AX, while decreasing protein levels of PPARγ, FASN, FABP4, RAD51 and POLB. However, overexpression of OGG1 can significantly inhibit ox-LDL damage to endothelial cells, promote lipid metabolism, decrease lipid droplet content, and improve DNA repair function. CONCLUSION: Over-expression of OGG1 improves DNA repair. Briefly, OGG1 over-expression enhances the DNA damage repair of ECs by regulating the expression levels of γH2AX, RAD51 and POLB, thereby enhancing cell viability and reducing apoptosis.

Finite element biomechanical analysis of 3D printed intervertebral fusion cage in osteoporotic population.

OBJECTIVE: To study the biomechanical characteristics of each tissue structure when using different 3D printing Cage in osteoporotic patients undergoing interbody fusion. METHODS: A finite element model of the lumbar spine was reconstructed and validated with regarding a range of motion and intervertebral disc pressure from previous in vitro studies. Cage and pedicle screws were implanted and part of the lamina, spinous process, and facet joints were removed in the L4/5 segment of the validated mode to simulate interbody fusion. A 280 N follower load and 7.5 N·m moment were applied to different postoperative models and intact osteoporotic model to simulate lumbar motion. The biomechanical characteristics of different models were evaluated by calculating and analyzing the range of motion of the fixed and cephalic adjacent segment, the stress of the screw-rod system, the stress at the interface between cage and L5 endplate, and intervertebral disc pressure of the adjacent segment. RESULTS: After rigid fixation, the range of motion of the fixed segment of model A-C decreased significantly, which was much smaller than that of the osteoporotic model. And with the increase of the axial area of the interbody fusion cages, the fixed segment of model A-C tended to be more stable. The range of motion and intradiscal pressure of the spinal models with different interbody fusion cages were higher than those of the complete osteoporosis model, but there was no significant difference between the postoperative models. On the other hand, the L5 upper endplate stress and screw-rod system stress of model A-C show a decreasing trend in different directions of motion. The stress of the endplate is the highest during flexion, which can reach 40.5 MPa (model A). The difference in endplate stress between models A-C was the largest during lateral bending. The endplate stress of models A and B was 150.5% and 140.9% of that of model C, respectively. The stress of the screw-rod system was the highest during lateral bending (model A, 102.0 MPa), which was 108.4%, 102.4%, 110.4%, 114.2% of model B and 158.5%, 110.1%, 115.8%, 125.4% of model C in flexion, extension, lateral bending, and rotation, respectively. CONCLUSIONS: For people with osteoporosis, no matter what type of cage is used, good immediate stability can be achieved after surgery. Larger cage sizes provide better fixation without significantly increasing ROM and IDP in adjacent segments, which may contribute to the development of ASD. In addition, larger cage sizes can disperse endplate stress and reduce stress concentration, which is of positive significance in preventing cage subsidence after operation. The cage and screw rod system establish a stress conduction pathway on the spine, and a larger cage greatly enhances the stress-bearing capacity of the front column, which can better distribute the stress of the posterior spine structure and the stress borne by the posterior screw rod system, reduce the stress concentration phenomenon of the nail rod system, and avoid exceeding the yield strength of the material, resulting in the risk of future instrument failure.

Bibliometric Analysis of the Development, Current Status, and Trends in Adult Degenerative Scoliosis Research: A Systematic Review from 1998 to 2023.

Purpose: Adult degenerative scoliosis (ADS) research lacks bibliometric analysis, despite numerous studies. This study aimed to systematically analyze the development, current status, hot topics, frontier areas, and trends in ADS research. Patients and Methods: A systematic literature review was conducted in the Web of Science Core Collection database from January 1998 to June 2023. Information regarding the country, institution, author, journal, and keywords was collected for each article. Bibliometric analysis was performed using VOSviewer and Citespace software. Results: The final analysis covered 1695 publications, demonstrating a steady increase in ADS research. The United States was the most prolific and influential country with 684 publications, followed by China and Japan. The University of California System was the most productive institution with 113 publications. Shaffrey, CI (47 publications) and Lenke, LG (41 publications) were top authors. The analysis revealed seven main research clusters: "intervertebral disc", "adult spinal deformity", "lumbar fusion", "minimally invasive surgery", "navigation", "postoperative complications", and "mental retardation". Keywords with strong bursts of activity included degeneration, prevalence, imbalance, classification, lumbar spinal stenosis, and kyphosis. Conclusion: In conclusion, in recent years, ADS research has undergone rapid development. This study analyzed its hot topics, advancements, and research directions, making it the latest bibliometric analysis in this field. The findings aim to provide a new perspective and guidance for clinical practitioners and researchers.

Identification of differentially expressed genes, signaling pathways and immune infiltration in postmenopausal osteoporosis by integrated bioinformatics analysis.

Background: Postmenopausal osteoporosis is a systemic metabolic disorder typified by an imbalance in bone turnover, where bone resorption supersedes bone formation. This imbalance primarily arises from a decline in bone mass induced by estrogen deficiency, and an elevated risk of fractures resulting from degradation of bone microstructure. Despite recognizing these changes, the precise causative factors and potential molecular pathways remain elusive. In this study, we aimed to identify differentially expressed genes (DEGs), associated pathways, and the role of immune infiltration in osteoporosis, leveraging an integrated bioinformatics approach to shed light on potential underlying molecular mechanisms. Methods: We retrieved the expression profiles of GSE230665 from the Gene Expression Omnibus database, comprising 15 femur samples, including 12 postmenopausal osteoporosis samples and 3 normal controls. From the aggregated microarray datasets, we derived differentially expressed genes (DEGs) for further bioinformatics analysis. We used WGCNA, analyzed DEGs, PPI, and conducted GO analysis to identify pivotal genes. We then used the CIBERSORT method to explore the degree of immune cell infiltration within femur specimens affected by postmenopausal osteoporosis. To probe into the relationship between pivotal genes and infiltrating immune cells, we conducted correlation analysis. Results: We identified a total of 12,204 DEGs. Among these, 12,157 were up-regulated, and 47 were down-regulated. GO and KEGG pathway analyses indicated that these DEGs predominantly targeted cellular protein localization activity and associated signaling pathways. The protein-protein interaction network highlighted four central hub-genes: RPL31, RPL34, EEF1G, and BPTF. Principal component analysis indicated a positive correlation between the expression of these genes and resting NK cells (as per CIBERSORT). In contrast, the expression of RPL31, RPL34, and EEF1G showed a negative correlation with T cells (gamma delta per CIBERSORT). Conclusions: Immune infiltration plays a role in the development of osteoporosis.

Effect of different loads on facet joint motion during lumbar lateral bending in sitting position.

OBJECTIVE: To study the effect of weight-bearing on lumbar facet joint during lateral bending in sitting position. METHODS: Ten normal healthy people (5 males and 5 females) aged 25-39 years (mean 32 ± 4.29 years) were recruited. CT scanning was used to reconstruct the lumbar spine model, and then dual fluoroscopic image system (DFIS) was used to restore the lumbar facet joint movement in sitting position. Finally, the lumbar facet joint translation distance and rotation angle were measured. RESULTS: In L3-4 level, the displacement of right facet joint in Y-axis was the smallest at 0.05 ± 0.40 mm, the displacement of 0 kg left facet joint in X-axis was the largest at 1.68 ± 0.85 mm, and the rotation angle was - 0.57 ± 1.43° to 5.66 ± 2.70° at 10 kg; in L4-5 level, the displacement of right facet joint in Y-axis was the smallest at 10 kg, - 0.13 ± 0.91 mm, and the displacement of left facet joint in Z-axis was the largest at - 2.11 ± 0.88 mm, and the rotation angle was 0.21 ± 2.14° to 7.89 ± 2.59° at 10 kg; in L5-S1 level, the displacement of right facet joint in Y-axis was the smallest at 10 kg, - 0.17 ± 1.10 mm, and the displacement of 0 kg left facet joint in X-axis was the largest at 2.19 ± 2.28 mm, and the rotation angle was 0.03 ± 2.02° to 3.98 ± 0.37°. CONCLUSION: In sitting position, weight-bearing has certain influence on the displacement of facet joints during lumbar lateral bending movement, and this influence occurs simultaneously in translation and rotation; the left and right facet joints are not symmetrical during lumbar lateral bending movement.

Ultra-high resistive switching current ratio and improved ferroelectricity and dielectric tunability performance in a BaTiO3/La0.7Sr0.3MnO3 heterostructure by inserting a SrCoO2.5 layer.

A BaTiO3/SrCoO2.5 (BTO/SCO) bilayer and a BTO single film were prepared by radio frequency magnetron sputtering on La0.7Sr0.3MnO3 (LSMO) buffered SrTiO3 (001) substrates. Interestingly, compared with reported BTO-based films, the BTO/SCO/LSMO heterostructure has a maximum ON/OFF current ratio of ∼945. More interestingly, compared with the BTO single layer, a larger Pr (∼18.4 µC cm-2) and larger dielectric tunability (∼71.9%) were achieved in the BTO/SCO bilayer. The improved performance may be attributed to the large tetragonality and improved oxygen vacancy concentrations in the BTO/SCO/LSMO heterostructure. Furthermore, our BTO/SCO/LSMO stacks exhibit potential for flexible electronic informational devices.

Solvent- and Additive-Free Dehydrogenation of N-Heterocycles with Oxygen Catalyzed by Polyoxovanadate-Based Metal-Organic Frameworks.

N-heteroarenes are a family of organics with significant chemical and pharmaceutical applications. They are generally prepared by the catalytic oxidative dehydrogenation (ODH) of partially saturated N-heterocycles. In this work, we prepare and demonstrate the catalytic ODH applications of two polyoxovanadate-based metal-organic frameworks of the general formula {[MII(bibp)1.5][VV2O6]}·H2O (M = Ni 1, Co 2; bibp = 4,4'-bis(imidazol-1-ylmethyl)biphenyl). They are based on nonprecious metals, need no additives or organic solvents typically required for catalytic ODH, and utilize molecular O2 as the oxidant, thus possessing all the traits desirable for practical catalysis. Catalyst 1 shows tolerance for a range of substrates with different electronic and steric features, including 2,3-dihydro-1H-indole and tetrahydroquinolines substituted with various functional groups. Mechanistic studies supported primarily by evidence from electron paramagnetic resonance and X-ray photoelectron spectra suggest that the VV sites in 1 are catalytically responsible, first enabling the formation of the substrate-based radical species by a single electron transfer event while being converted into its mixed-valence form, followed by the production of the superoxide radical anion (O2•-) upon contact with O2. The reaction mixture containing O2•- and the initially formed substrate-based radical then undergoes a series of steps, including the hydrogen abstraction and formation of the hydroperoxyl radical, the production and tautomerization of the partially dehydrogenated intermediate, and finally a repeating cycle of the aforementioned steps, to achieve the high-yield conversion of substrates to the corresponding N-heteroarenes.

Biomechanical differences between two different shapes of oblique lumbar interbody fusion cages on whether to add posterior internal fixation system: a finite element analysis.

BACKGROUND: Oblique lateral lumbar fusion (OLIF) is widely used in spinal degeneration, deformity and other diseases. The purpose of this study was to investigate the biomechanical differences between two different shapes of OLIF cages on whether to add posterior internal fixation system, using finite element analysis. METHODS: A complete three-dimensional finite element model is established and verified for L3-L5. Surgical simulation was performed on the verified model, and the L4-L5 was the surgical segment. A total of the stand-alone group (Model A1, Model B1) and the BPSF group (Model A2, Model B2) were constructed. The four OLIF surgical models were: A1. Stand-alone OLIF with a kidney-shaped Cage; B1. Stand-alone OLIF with a straight cage; A2. OLIF with a kidney-shaped cage + BPSF; B2. Stand-alone OLIF with a straight cage + BPSF, respectively. The differences in the range of motion of the surgical segment (ROM), equivalent stress peak of the cage (ESPC), the maximum equivalent stress of the endplate (MESE) and the maximum stress of the internal fixation (MSIF) were compared between different models. RESULTS: All OLIF surgical models showed that ROM declines between 74.87 and 96.77% at L4-L5 operative levels. The decreasing order of ROM was Model A2 > Model B2 > Model A1 > Model A2. In addition, the ESPC and MESE of Model A2 are smaller than those of other OLIF models. Except for the left-bending position, the MSIF of Model B2 increased by 1.51-16.69% compared with Model A2 in each position. The maximum value of MESE was 124.4 Mpa for Model B1 in the backward extension position, and the minimum value was 7.91 Mpa for Model A2 in the right rotation. Stand-alone group showed significantly higher ROMs and ESPCs than the BPSF group, with maximum values of 66.66% and 70.59%. For MESE, the BPSF group model can be reduced by 89.88% compared to the stand-alone group model. CONCLUSIONS: Compared with the traditional straight OLIF cage, the kidney-shaped OLIF cage can further improve the stability of the surgical segment, reduce ESPC, MESE and MSIF, and help to reduce the risk of cage subsidence.