Photoactive imaging and therapy for colorectal cancer using a CEA-Affimer conjugated Foslip nanoparticle.

Theranostic nanoparticles hold promise for simultaneous imaging and therapy in colorectal cancer. Carcinoembryonic antigen can be used as a target for these nanoparticles because it is overexpressed in most colorectal cancers. Affimer reagents are synthetic proteins capable of binding specific targets, with additional advantages over antibodies for targeting. We fabricated silica nanoparticles using a water-in-oil microemulsion technique, loaded them with the photosensitiser Foslip, and functionalised the surface with anti-CEA Affimers to facilitate fluorescence imaging and photodynamic therapy of colorectal cancer. CEA-specific fluorescence imaging and phototoxicity were quantified in colorectal cancer cell lines and a LS174T murine xenograft colorectal cancer model. Anti-CEA targeted nanoparticles exhibited CEA-specific fluorescence in the LoVo, LS174T and HCT116 cell lines when compared to control particles (p < 0.0001). No toxicity was observed in LS174T cancer mouse xenografts or other organs. Following photo-irradiation, the anti-CEA targeted particles caused significant cell death in LoVo (60%), LS174T (90%) and HCT116 (70%) compared to controls (p < 0.0001). Photodynamic therapy (PDT) at 24 h in vivo showed a 4-fold reduction in tumour volume compared to control mouse xenografts (p < 0.0001). This study demonstrates the efficacy of targeted fluorescence imaging and PDT using Foslip nanoparticles conjugated to anti-CEA Affimer nanoparticles in in vitro and in vivo colorectal cancer models.

Hyaluronic-Acid-Tagged Cubosomes Deliver Cytotoxics Specifically to CD44-Positive Cancer Cells.

Delivery of chemotherapy drugs specifically to cancer cells raises local drug doses in tumors and therefore kills more cancer cells while reducing side effects in other tissues, thereby improving oncological and quality of life outcomes. Cubosomes, liquid crystalline lipid nanoparticles, are potential vehicles for delivery of chemotherapy drugs, presenting the advantages of biocompatibility, stable encapsulation, and high drug loading of hydrophobic or hydrophilic drugs. However, active targeting of drug-loaded cubosomes to cancer cells, as opposed to passive accumulation, remains relatively underexplored. We formulated and characterized cubosomes loaded with potential cancer drug copper acetylacetonate and functionalized their surfaces using click chemistry coupling with hyaluronic acid (HA), the ligand for the cell surface receptor CD44. CD44 is overexpressed in many cancer types including breast and colorectal. HA-tagged, copper-acetylacetonate-loaded cubosomes have an average hydrodynamic diameter of 152 nm, with an internal nanostructure based on the space group Im3m. These cubosomes were efficiently taken up by two CD44-expressing cancer cell lines (MDA-MB-231 and HT29, representing breast and colon cancer) but not by two CD44-negative cell lines (MCF-7 breast cancer and HEK-293 kidney cells). HA-tagged cubosomes caused significantly more cell death than untargeted cubosomes in the CD44-positive cells, demonstrating the value of the targeting. CD44-negative cells were equally relatively resistant to both, demonstrating the specificity of the targeting. Cell death was characterized as apoptotic. Specific targeting and cell death were evident in both 2D culture and 3D spheroids. We conclude that HA-tagged, copper-acetylacetonate-loaded cubosomes show great potential as an effective therapeutic for selective targeting of CD44-expressing tumors.

Surface modified hexagonal upconversion nanoparticles for the development of competitive assay for biodetection.

Up-conversion nanoparticles (UCNPs) of sodium yttrium fluoride with ytterbium and erbium ions as sensitizer and activator (ß-NaYF4/Yb3+/Er3+) have been synthesised by a solvothermal method. The synthesised particles were found to be highly uniform in size (~50 nm) and of hexagonal crystal phase producing strong up-conversion luminescence dominated in the green wavelength region. During the synthesis, photoluminescence properties of the reaction mixture were monitored at regular intervals to ensure the required particle size distribution and luminescence efficiency. The hydrophobic particles thus obtained were modified by coating with silica, yielding particles that were stable in aqueous media. The silica coated UCNPs were further modified with maleimide-polyethylene glycol-silane (mal-PEG-silane) to provide thiol reactive surface groups. The silanized, maleimide-bearing UCNPs were effective for conjugating to reductively-cleaved half antibodies against ofloxacin, a veterinary antibiotic, to produce photoluminescent nanobiosensors for its detection and quantification. The speed and minimum detection concentration (~10 nM) that we report for a competitive assay of ofloxacin in this study is promising for developing sensors for this and other biomolecules.

Affimer Tagged Cubosomes: Targeting of Carcinoembryonic Antigen Expressing Colorectal Cancer Cells Using In Vitro and In Vivo Models.

Nanomedicines, while having been approved for cancer therapy, present many challenges such as low stability, rapid clearance, and nonspecificity leading to off-target toxicity. Cubosomes are porous lyotropic liquid crystalline nanoparticles that have shown great premise as drug delivery vehicles; however, their behavior in vivo is largely underexplored, hindering clinical translation. Here, we have engineered cubosomes based on the space group Im3m that are loaded with copper acetylacetonate as a model drug, and their surfaces are functionalized for the first time with Affimer proteins via copper-free click chemistry to actively target overexpressed carcinoembryonic antigens on LS174T colorectal cancer cells. Unlike nontargeted cubosomes, Affimer tagged cubosomes showed preferential accumulation in cancer cells compared to normal cells not only in vitro (2D monolayer cell culture and 3D spheroid models) but also in vivo in colorectal cancer mouse xenografts, while exhibiting low nonspecific absorption and toxicity in other vital organs. Cancerous spheroids had maximum cell death compared to noncancerous cells upon targeted delivery. Xenografts subjected to targeted drug-loaded cubosomes showed a 5-7-fold higher drug accumulation in the tumor tissue compared to the liver, kidneys, and other vital organs, a significant decrease in tumor growth, and an increased survival rate compared to the nontargeted group. This work encompasses the first thorough preclinical investigation of Affimer targeted cubosomes as a cancer therapeutic.

Barium yttrium fluoride based upconversion nanoparticles as dual mode image contrast agents.

Dual labeled contrast agents could provide better complementary information for bioimaging than available solely from a single modality. In this paper we investigate the suitability of Yb3+ and Er3+-doped BaYF5 upconversion nanoparticles (UCNPs) as both optical and X-ray micro computed tomography (µCT) contrast agents. Stable, aqueous UCNP dispersions were synthesised using a hydrothermal method with the addition of polyethyleneimine (PEI). UCNPs were single crystal and had a truncated cuboidal and/or truncated octahedral morphology, with average particle size of 47 ±9 nm from transmission electron microscopy which was further used to characterize the structure and composition in detail. A zeta potential value of +51 mV was measured for the aqueous nanoparticle dispersions which is beneficial for cell permeability. The outer hydrated PEI layer is also advantageous for the attachment of proteins for targeted delivery in biological systems. The prepared UCNPs were proven to be non-toxic to endothelial cells up to a concentration of 3.5 mg/mL, when assessed using an MTT assay. The particles showed intense green upconversion photoluminescence when excited at a wavelength of 976 nm using a diode laser. Quantitative X-ray µCT contrast imaging confirmed the potential of these UCNPs as X-ray contrast agents and confirming their dual modality for bioimaging.

Selection and characterisation of Affimers specific for CEA recognition.

Carcinoembryonic antigen (CEA) is the only blood based protein biomarker at present, used for preoperative screening of advanced colorectal cancer (CRC) patients to determine the appropriate curative treatments and post-surveillance screening for tumour recurrence. Current diagnostics for CRC detection have several limitations and development of a highly sensitive, specific and rapid diagnostic device is required. The majority of such devices developed to date are antibody-based and suffer from shortcomings including multimeric binding, cost and difficulties in mass production. To circumvent antibody-derived limitations, the present study focused on the development of Affimer proteins as a novel alternative binding reagent for CEA detection. Here, we describe the selection, from a phage display library, of Affimers specific to CEA protein. Characterization of three anti-CEA Affimers reveal that these bind specifically and selectively to protein epitopes of CEA from cell culture lysate and on fixed cells. Kinetic binding analysis by SPR show that the Affimers bind to CEA with high affinity and within the nM range. Therefore, they have substantial potential for used as novel affinity reagents in diagnostic imaging, targeted CRC therapy, affinity purification and biosensor applications.

Reagentless Affimer- and antibody-based impedimetric biosensors for CEA-detection using a novel non-conducting polymer.

Polyoctopamine (POct), an amine-functionalised non-conducting polymer, as the transducer layer in an electrochemical biosensor, is presented. This polymer offers versatile covalent coupling either through thiol linker conjugation, carboxyl or aldehyde functional groups without the requirement of pre- or post-surface activation. The colorectal cancer biomarker carcinoembryonic antigen (CEA) was selected as the target analyte, whilst an antibody and a synthetic binding protein, an Affimer, were used as distinct bioreceptors to demonstrate the versatility of polyoctopamine as a transducer polymer layer for oriented immobilisation of the bioreceptors. The electrodeposited polymer layer was characterised using cyclic voltammetry, electrochemical impedance spectroscopy, and on-sensor chemiluminescent blotting. The performance of optimised POct-based biosensors were tested in spiked human serum. Results showed that the electropolymerisation of octopamine on screen printed gold electrode generates a thin polymer film with low resistance. Close proximity of the immobilised bioreceptors to the transducer layer greatly enhanced the sensitivity detection. The sensitivity of the smaller monomeric bioreceptor (Affimer, 12.6 kDa) to detect CEA was comparable to the dimeric antibody (150 kDa) with limit of detection at 11.76 fM which is significantly lower than the basal clinical levels of 25 pM. However, the Affimer-based sensor had a narrower dynamic range compared to the immunosensor (1-100 fM vs. 1 fM - 100 nM, respectively). All electrochemical measurements were done in less than 5 min with small sample volumes (10 µl). Hence, polyoctopamine features a simple fabrication of impedimetric biosensors using amine-functionalisation technique, provides rapid response time with enhanced sensitivity and label-free detection.

Characterization and applications of a Crimean-Congo hemorrhagic fever virus nucleoprotein-specific Affimer: Inhibitory effects in viral replication and development of colorimetric diagnostic tests.

Crimean-Congo hemorrhagic fever orthonairovirus (CCHFV) is one of the most widespread medically important arboviruses, causing human infections that result in mortality rates of up to 60%. We describe the selection of a high-affinity small protein (Affimer-NP) that binds specifically to the nucleoprotein (NP) of CCHFV. We demonstrate the interference of Affimer-NP in the RNA-binding function of CCHFV NP using fluorescence anisotropy, and its inhibitory effects on CCHFV gene expression in mammalian cells using a mini-genome system. Solution of the crystallographic structure of the complex formed by these two molecules at 2.84 Å resolution revealed the structural basis for this interference, with the Affimer-NP binding site positioned at the critical NP oligomerization interface. Finally, we validate the in vitro application of Affimer-NP for the development of enzyme-linked immunosorbent and lateral flow assays, presenting the first published point-of-care format test able to detect recombinant CCHFV NP in spiked human and animal sera.

Selective cellular imaging with lanthanide-based upconversion nanoparticles.

Upconversion nanoparticles (UCNPs) with sodium yttrium fluoride, NaYF4 (host lattice) doped with Yb3+ (sensitizer) and Er3+ (activator) were synthesized via hydrothermal route incorporating polyethyleneimine (PEI) for their long-term stability in water. The cationic PEI-modified UCNPs with diameter 20 ± 4 nm showed a zeta potential value of +36.5 mV and showed an intense, visible red luminescence and low-intensity green emission with 976 nm laser excitation. The particles proven to be nontoxic to endothelial cells, with a 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT) assay, showing 90% to 100% cell viability, across a wide range of UCNP concentrations (0.3 ng/mL-0.3 mg/mL) were used in multiphoton imaging. Multiphoton cellular imaging and emission spectroscopy data reported here prove that the UCNPs dispersed in cell culture media are predominantly concentrated in the cytoplasm than the cell nucleus. The energy transfer from PEI-coated UCNPs to surrounding media for red luminescence in the biological system is also highlighted with spectroscopic measurements. Results of this study propose that UCNPs can, therefore, be used for cytoplasm selective imaging together with multiphoton dyes (eg, 4',6-diamidino-2-phenylindole (DAPI)) that are selective to cell nucleus.

The theoretical molecular weight of NaYF 4 :RE upconversion nanoparticles.

Upconversion nanoparticles (UCNPs) are utilized extensively for biomedical imaging, sensing, and therapeutic applications, yet the molecular weight of UCNPs has not previously been reported. Herein, we present a theory based upon the crystal structure of UCNPs to estimate the molecular weight of UCNPs: enabling insight into UCNP molecular weight for the first time. We estimate the theoretical molecular weight of various UCNPs reported in the literature, predicting that spherical NaYF4 UCNPs ~ 10 nm in diameter will be ~1 MDa (i.e. 106 g/mol), whereas UCNPs ~ 45 nm in diameter will be ~100 MDa (i.e. 108 g/mol). We also predict that hexagonal crystal phase UCNPs will be of greater molecular weight than cubic crystal phase UCNPs. Additionally we find that a Gaussian UCNP diameter distribution will correspond to a lognormal UCNP molecular weight distribution. Our approach could potentially be generalised to predict the molecular weight of other arbitrary crystalline nanoparticles: as such, we provide stand-alone graphic user interfaces to calculate the molecular weight both UCNPs and arbitrary crystalline nanoparticles. We expect knowledge of UCNP molecular weight to be of wide utility in biomedical applications where reporting UCNP quantity in absolute numbers or molarity will be beneficial for inter-study comparison and repeatability.

Considerations in producing preferentially reduced half-antibody fragments.

Half-antibody fragments are a promising reagent for biosensing, drug-delivery and labeling applications, since exposure of the free thiol group in the Fc hinge region allows oriented reaction. Despite the structural variations among the molecules of different IgG subclasses and those obtained from different hosts, only generalized preferential antibody reduction protocols are currently available. Preferential reduction of polyclonal sheep anti-digoxin, rabbit anti-Escherichia coli and anti-myoglobin class IgG antibodies to half-antibody fragments has been investigated. A mild reductant 2-mercaptoethylamine (2-MEA) and a slightly stronger reductant tris(2-carboxyethyl)phosphine (TCEP) were used and the fragments obtained were quantitatively determined by SDS-PAGE analysis. It has been shown that the yields of half-antibody fragments could be increased by lowering the pH of the reduction mixtures. However, antibody susceptibility to the reductants varied. At pH4.5 the highest yield of sheep anti-digoxin IgG half-antibody fragments was obtained with 1M 2-MEA. Conversely, rabbit IgG half-antibody fragments could only be obtained with the stronger reductant TCEP. Preferential reduction of rabbit anti-myoglobin IgG antibodies was optimized and the highest half-antibody yield was obtained with 35 mM TCEP. Finally, it has been demonstrated that produced anti-myoglobin half-IgG fragments retained their binding activity.

CEA-targeted nanoparticles allow specific in vivo fluorescent imaging of colorectal cancer models.

Fluorescent imaging of colorectal tumor cells would improve tumor localization and allow intra-operative staging, facilitating stratification of surgical resections thereby improving patient outcomes. We aimed to develop and test fluorescent nanoparticles capable of allowing this in vivo. Dye-doped silica nanoparticles were synthesized. Anti-CEA (carcinoembryonic antigen) or control IgGs were conjugated to nanoparticles using various chemical strategies. Binding of CEA-targeted or control nanoparticles to colorectal cancer cells was quantified in vitro, and in vivo after systemic-delivery to murine xenografts. CEA-targeted, polyamidoamine dendrimer-conjugated, nanoparticles, but not control nanoparticles, allowed strong tumor-specific imaging. We are the first to demonstrate live, specific, in vivo imaging of colorectal cancer cells using antibody-targeted fluorescent nanoparticles. These nanoparticles have potential to allow intra-operative fluorescent visualization of tumor cells.

Surface charge control through the reversible adsorption of a biomimetic polymer on silica particles.

The control of the physicochemical properties of silica particles is of paramount importance to achieve full functionality in specific applications. A novel facile method of silica particle synthesis, requiring only two reactants, was developed. Control of the surface charge of these newly synthesized silica particles was achieved via the rapid electrostatic adsorption and acidic desorption of the branched, biomimetic polymer, polyethylenimine (PEI). Successful adsorption/desorption of PEI was supported by ATR-FTIR spectra, an adsorption isotherm, and ζ-potential curves. PEI adsorption above a threshold PEI concentration was determined to categorically change the topography of the silica particles' ζ-potential curve. The results from our study convey a rapid, reversible, and reliable method of silica particle surface charge control. This may be of particular use in tailoring surface interactions of silica or silica-coated particles for applications in drug delivery, biomedical technologies, catalysis, and coatings.

Biosensors for whole-cell bacterial detection.

Bacterial pathogens are important targets for detection and identification in medicine, food safety, public health, and security. Bacterial infection is a common cause of morbidity and mortality worldwide. In spite of the availability of antibiotics, these infections are often misdiagnosed or there is an unacceptable delay in diagnosis. Current methods of bacterial detection rely upon laboratory-based techniques such as cell culture, microscopic analysis, and biochemical assays. These procedures are time-consuming and costly and require specialist equipment and trained users. Portable stand-alone biosensors can facilitate rapid detection and diagnosis at the point of care. Biosensors will be particularly useful where a clear diagnosis informs treatment, in critical illness (e.g., meningitis) or to prevent further disease spread (e.g., in case of food-borne pathogens or sexually transmitted diseases). Detection of bacteria is also becoming increasingly important in antibioterrorism measures (e.g., anthrax detection). In this review, we discuss recent progress in the use of biosensors for the detection of whole bacterial cells for sensitive and earlier identification of bacteria without the need for sample processing. There is a particular focus on electrochemical biosensors, especially impedance-based systems, as these present key advantages in terms of ease of miniaturization, lack of reagents, sensitivity, and low cost.

A label-free electrical impedimetric biosensor for the specific detection of Alzheimer's amyloid-beta oligomers.

Alzheimer's disease (AD) is the most common form of dementia, with over 37 million sufferers worldwide and a global cost of over $600 billion. There is currently no cure for AD and no reliable method of diagnosis other than post-mortem brain examination. The development of a point-of-care test for AD is an urgent requirement in order to provide earlier diagnosis and, thus, useful therapeutic intervention. Here, we present a novel, label-free impedimetric biosensor for the specific detection of amyloid-beta oligomers (AßO), which are the primary neurotoxic species in AD. AßO have been proposed as the best biomarker for AD and levels of AßO in the blood have been found to correlate with cerebrospinal fluid load. The biorecognition element of our biosensor is a fragment of the cellular prion protein (PrP(C), residues 95-110), a highly expressed synaptic protein which mediates the neuronal binding and toxicity of AßO. During the layer-by-layer sensor construction, biotinylated PrP(C) (95-110) was attached via a biotin/NeutrAvidin bridge to polymer-functionalised gold screen-printed electrodes. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry and scanning electron microscopy were used to validate biosensor assembly and functionality. EIS was employed for biosensor interrogation in the presence of Aß oligomers or monomers. The biosensor was specific for the detection of synthetic AßO and gave a linear response, without significant detection of monomeric Aß, down to an equivalent AßO concentration of ~0.5 pM. The biosensor was also able to detect natural, cell-derived AßO present in conditioned medium. The eventual commercialisation of this biosensor system could allow for the early diagnosis and disease monitoring of AD.

Novel impedimetric immunosensor for detection of pathogenic bacteria Streptococcus pyogenes in human saliva.

Streptococcus pyogenes , also known as group A streptococcus (GAS), is a Gram positive human pathogen responsible for invasive and noninvasive human infections with a high incidence rate. Traditional detection methods involve cell culture and PCR, which are limited by long processing times or the need for high cost equipment. Impedance-based electrochemical immunosensors provide an alternative by which precise and rapid quantitative detection of the organism can help with rapid clinical decisions. To bring a biosensor for point-of-care applications to market, strict optimization of each level of construction and operation is required. In this paper, commercial screen-printed gold electrodes have been used to construct polytyramine (Ptyr)-based immunosensors. Biotin tagged whole antibodies against S. pyogenes were conjugated to Ptyr amine group via biotin-NeutrAvidin coupling. Sensors were optimized at each level of construction, particularly for Ptyr electrodeposition and antibody concentration, to optimize signal and specificity. Scanning electron microscopy, fluorescence microscopy, and on-sensor analysis (HRP conjugated enhanced chemiluminescence-based semiquantitative method) to detect Ptyr surface amine and bound antibody were performed as supporting techniques. Cumulative and single shot incubations had shown detection range of 100 to 10(5) cells per 10 µL and 100 to 10(4) cells per 10 µL of bacteria in PBS, respectively. Sensors were also able to specifically detect S. pyogenes in 50% (v/v) human saliva, with good selectivity and low cross-reactivity.

Novel impedimetric immunosensor for the detection and quantitation of Adenovirus using reduced antibody fragments immobilized onto a conducting copolymer surface.

The number of Adenovirus (Ad) infections detected in immunocompromised people has increased due to the number of patients receiving transplants, as well as the HIV pandemic. Ads cause life-threatening diseases specific to the infected organs of immunocompromised hosts, with discontinuation of immunosuppressive agents necessary to prevent morbidity. The methodology in this paper has been employed to develop a novel impedimetric based assay platform to detect and quantify human Ads, which is comparable in performance to current methods, such as ELISA and PCR, but is also less expensive and faster. Novel immunosensors have been fabricated using polyclonal antibodies raised against a human Ad (Ad5) capsid protein, which were selectively cleaved into antibody fragments by 2-mercaptoethylamine. The fragments were immobilized onto a functionalized conducting copolymer matrix comprising polyaniline and 2-aminobenzylamine. Fully fabricated sensors were incubated with two immunologically distinct serotypes of Ad, Ad5 and Ad3, with between 10 and 10(12)virus particles/mL prior to sensor interrogation. Electrochemical impedance spectroscopy was used to measure the charge transfer resistance of the sensors over a range of frequencies from 25 kHz to 0.1 Hz. Our data demonstrate that the immunosensors specifically detect, and differentiate between, closely related human Ad serotypes with a limit of detection of 10(3)virus particles/mL. In addition, atomic force microscopy was applied to study the sensor surface nanostructure. Future work looks to test virus containing clinical samples but this could be a viable and valuable alternative for point-of-care virus detection and quantification.

Flow cell design for effective biosensing.

The efficiency of three different biosensor flow cells is reported. All three flow cells featured a central channel that expands in the vicinity of the sensing element to provide the same diameter active region, but the rate of channel expansion and contraction varied between the designs. For each cell the rate at which the analyte concentration in the sensor chamber responds to a change in the influent analyte concentration was determined numerically using a finite element model and experimentally using a flow-fluorescence technique. Reduced flow cell efficiency with increasing flow rates was observed for all three designs and was related to the increased importance of diffusion relative to advection, with efficiency being limited by the development of regions of recirculating flow (eddies). However, the onset of eddy development occurred at higher flow rates for the design with the most gradual channel expansion, producing a considerably more efficient flow cell across the range of flow rates considered in this study. It is recommended that biosensor flow cells be designed to minimize the tendency towards, and be operated under conditions that prevent the development of flow recirculation.

Fabrication and activity of silicate nanoparticles and nanosilicate-entrapped enzymes using polyethyleneimine as a biomimetic polymer.

In nature, some peptides induce precipitation of silicic acid into silica nanoparticles such as is found in marine algae called diatoms. However, polybasic polymers can act as peptide mimics; one such polymer, polyethyleneimine (PEI), has the advantage that it is stable at room temperature and is inexpensive, in comparison with synthetic peptides. We describe the fabrication and characterization of biosilicate nanoparticles formed by mimicking the peptides using PEI. Brownian motion nanoparticle tracking analysis and field emission gun scanning electron microscopy have been used for the first time to characterize nanoparticles made with tetramethyl orthosilicate (TMOS) and PEI to investigate the fundamental factors that affect particle properties. These factors include the effect of phosphate concentration, PEI molecular weight, TMOS concentration, and species of alkoxy-silane used. The properties of the particles are compared with other particles made with polymers that induce silication. Our results show that using PEI gives differences in particle size compared with previous work using other polymers that induce silication. The entrapment of enzymes during the silication process, rationale for using nonphosphate and phosphate buffers during enzyme entrapment, and the analysis of enzyme activity are also presented. Because enzymes can be entrapped during fabrication, it means that there are many future possibilities for the use of silicate nanoparticles containing enzymes, such as biosensors and biocatalytic reactors.

A review on viral biosensors to detect human pathogens.

Rapid identification of viruses has important implications for medical healthcare. Current methods for identification and quantification of particular virus are time consuming and often expensive. Therefore, demand for sensitive and accurate viral biosensors with rapid detection systems is increasing. A hand held biosensing device would give fast, reliable results for identifying and quantitating the number of virus particles in a sample. Techniques currently being applied to achieve this aim include electrochemical biosensors, based on amperometric, potentiometric and impedance measurement, optical biosensors using surface plasmon resonance (SPR), optical fibers and piezoelectric biosensors based on microcantilevers. Future research also looks to the use of nanoparticles and novel nanomaterials as alternate recognition surfaces for use in a variety of sensor formats.