Near-infrared two-photon absorption and excited state dynamics of a fluorescent diarylethene (fDAE) derivative were investigated by time-resolved absorption and fluorescence spectroscopies. Prescreening with quantum chemical calculation predicted that a derivative with methylthienyl groups (mt-fDAE) in the closed-ring isomer has a two-photon absorption cross-section larger than 1000 GM, which was experimentally verified by Z-scan measurements and excitation power dependence in transient absorption. Comparison of transient absorption spectra under one-photon and simultaneous two-photon excitation conditions revealed that the closed-ring isomer of mt-fDAE populated into higher excited states deactivates following three pathways on a timescale of ca. 200 fs: (i) the cycloreversion reaction more efficient than that by the one-photon process, (ii) internal conversion into the S1 state, and (iii) relaxation into a lower state (S1' state) different from the S1 state. Time-resolved fluorescence measurements demonstrated that this S1' state is relaxed to the S1 state with the large emission probability. These findings obtained in the present work contribute to extension of the ON-OFF switching capability of fDAE to the biological window and application to super-resolution fluorescence imaging in a two-photon manner.
Herein, we introduce a model of electronic spin isomers, the electronic counterpart of nuclear spin isomers, by using a stable organic diradical. The diradical, composed of two benzotriazinyl radicals connected by a rigid triptycene skeleton, exhibits a small singlet-triplet energy gap of -3.0 kJ/mol, indicating ca. 1:1 coexistence of the two spin states at room temperature. The diradical shows characteristic near-IR absorption bands, which are absent in the corresponding monoradical subunit. Variable temperature measurements revealed that the absorbance of the NIR band depends on the abundance of the singlet state, allowing us to identify the NIR band as the singlet-specific absorption band. It enables photoexcitation of one of the two spin states coexisting in thermal equilibrium. Transient absorption spectroscopy disclosed that the two spin states independently follow qualitatively different excited-state dynamics. These results demonstrate a novel approach to the design and study of electronic spin isomers based on organic diradicals.
The self-assembled state of molecules plays a pivotal role in determining how inherent molecular properties transform and give rise to supramolecular functionalities and has long attracted attention. However, understanding the influence of morphologies spanning the nano- to mesoscopic scales of supramolecular assemblies derived from identical intermolecular interactions has been notoriously challenging due to dynamic structural change and monomer exchange of assemblies in solution. In this study, we demonstrate that curved one-dimensional molecular assemblies (supramolecular polymers) of lengths of around 70-200 nm, originating from the same luminescent molecule, exhibit distinct photoluminescent properties when they form closed circular structures (toroids) versus when they possess chain termini in solution (random coils). By exploiting the difference in kinetic stability between the toroids and random coils, we developed a dialysis protocol to selectively purify the former. It was revealed that these terminus-free closed structures manifest higher energy and more efficient luminescence compared with their mixed state with random coils. Time-resolved fluorescence measurements unveiled that random coils, due to their dynamic structural fluctuation in solution, generate local defects throughout the main chain, leading to luminescence from lower energy levels. In mixtures of the two assemblies, luminescence was exclusively observed from such a lower energy level of random coils, a result attributed to energy transfer between the assemblies. This work emphasizes that for identical supramolecular assemblies, only averaged properties have traditionally been considered, but their structures at the nano- to mesoscopic scale are important especially if they have a certain degree of shape persistency even in solution.
We herein report a method for site-selective photo-crosslinking of a DNA duplex. A stilbene pair was introduced into a DNA duplex and a ruthenium complex was conjugated with a triplex-forming oligonucleotide. We demonstrated that [2+2] photocycloaddition of the stilbene pair occurred upon irradiation with visible light when the ruthenium complex was in close proximity due to triplex formation. No reaction occurred when the ruthenium complex was not in proximity to the stilbene pair. The wavelength of visible light used was of lower energy than the wavelength of UV light necessary for direct excitation of stilbene. Quantum chemical calculation indicated that ruthenium complex catalyzed the photocycloaddition via triplet-triplet energy transfer. Site selectivity of this photo-crosslinking system was evaluated using a DNA duplex bearing two stilbene pairs as a substrate; we showed that the site of crosslinking was precisely regulated by the sequence of the oligonucleotide linked to the ruthenium complex. Since this method does not require orthogonal photoresponsive molecules, it will be useful in construction of complex photoresponsive DNA circuits, nanodevices and biological tools.
Ruthenium , Stilbenes , Ruthenium/chemistry , DNA/chemistry , Light , Oligonucleotides
The resonance between an electronic transition of a micro/nanoscale object and an incident photon flux can modify the radiation force exerted on that object, especially at an interface. It has been theoretically proposed that a non-linear stimulated emission process can also induce an optical force, however its direction will be opposite to conventional photon scattering/absorption processes. In this work, we experimentally and theoretically demonstrate that a stimulated emission process can induce a repulsive pulling optical force on a single trapped dye-doped particle. Moreover, we successfully integrate both attractive pushing (excited state absorption) and repulsive pulling (stimulated emission) resonance forces to control the overall exerted optical force on an object, validating the proposed non-linear optical resonance theory. Indeed, the results presented here will enable the optical manipulation of the exerted optical force with exquisite control and ultimately enable single particle manipulation.
We have demonstrated in the present report that dielectric microparticles exhibited orbital rotation in the light field of non-coaxially configured two counter-propagating laser beams both in numerical simulations and experiments. A series of computational simulations indicated that when irradiated with two non-coaxially counter-propagating parallel laser beams with the same intensity distributions in the absence of thermal (Brownian) motion, a microparticle did not exhibit orbital rotation due to the symmetry of the optical field. However, the computations predicted that a microparticle exhibited one directional orbital rotation in the presence of thermal motion because of the symmetry breaking of the optical force acting on the particle. This spontaneous orbital rotation was experimentally demonstrated for 1-µm dielectric particles in water at room temperature.
The phenomenon of crystal melting by light irradiation, known as photo-induced crystal-to-liquid transition (PCLT), can dramatically change material properties with high spatiotemporal resolution. However, the diversity of compounds exhibiting PCLT is severely limited, which hampers further functionalisation of PCLT-active materials and the fundamental understandings of PCLT. Here, we report on heteroaromatic 1,2-diketones as the new class of PCLT-active compounds, whose PCLT is based on conformational isomerisation. In particular, one of the diketones demonstrates luminescence evolution prior to crystal melting. Thus, the diketone crystal exhibits dynamic multistep changes in the luminescence colour and intensity during continuous ultraviolet irradiation. This luminescence evolution can be ascribed to the sequential PCLT processes of crystal loosening and conformational isomerisation before macroscopic melting. Single-crystal X-ray structural analysis, thermal analysis, and theoretical calculations of two PCLT-active and one inactive diketones revealed weaker intermolecular interactions for the PCLT-active crystals. In particular, we observed a characteristic packing motif for the PCLT-active crystals, consisting of an ordered layer of diketone core and a disordered layer of triisopropylsilyl moieties. Our results demonstrate the integration of photofunction with PCLT, provide fundamental insights into the melting process of molecular crystals, and will diversify the molecular design of PCLT-active materials beyond classical photochromic scaffolds such as azobenzenes.
A kinetically-stabilized nitrogen-doped triangulene cation derivative has been synthesized and isolated as the stable diradical with a triplet ground state that exhibits near-infrared emission. As was the case for a triangulene derivative we previously synthesized, the triplet ground state with a large singlet-triplet energy gap was experimentally confirmed by magnetic measurements. In contrast to the triangulene derivative, the nitrogen-doped triangulene cation derivative is highly stable even in solution under air and exhibits near-infrared absorption and emission because the alternancy symmetry of triangulene is broken by the nitrogen cation. Breaking the alternancy symmetry of triplet alternant hydrocarbon diradicals by a nitrogen cation would therefore be an effective strategy to create stable diradicals possessing magnetic properties similar to the parent hydrocarbons but with different electrochemical and photophysical properties.
Expression of room-temperature phosphorescence (RTP) in organic materials requires complicated molecular design and specific intermolecular interactions, and therefore types of RTP materials are restricted. This work presents cage-like sodalite-type porous organic salts (s-POSs) as host materials for luminescent molecules to induce RTP, using tetrasulfonic acid with an adamantane core and triphenylmethylamines that are modified with substituents in the para-positions of benzene rings (TPMA-X). By adding a representative luminescent molecule (pyrene) to a reaction solution during construction of s-POSs, the molecule is incorporated in a facile manner. s-POSs with a heavy halogen atom (X: Iodine) on the pore surface give heavy atom effects, suppression of thermal vibration, and protection from oxygen, for the incorporated molecule, which induce its RTP even in air. This strategy can be applied to various luminescent molecules, which may lead to the achievement of RTP of various colors.
Though s-indacene is an intriguing antiaromatic hydrocarbon of 12 π-electrons, it has been underrepresented due to the lack of efficient and versatile methods to prepare stable derivatives. Herein we report a concise and modular synthetic method for hexaaryl-s-indacene derivatives bearing electron-donating/-accepting groups at specific positions to furnish C2h-, D2h-, and C2v-symmetric substitution patterns. We also report the effects of substituents on their molecular structures, frontier molecular orbital (MO) levels, and magnetically induced ring current tropicities. Both theoretical calculations and X-ray structure analyses indicate that the derivatives of the C2h-substitution pattern adopt different C2h structures with significant bond length alternation depending on the electronic property of the substituents. Due to the nonuniform distribution of the frontier MOs, their energy levels are selectively modulated by the electron-donating substituents. This leads to the inversion of the HOMO and HOMO-1 sequences with respect to those of the intrinsic s-indacene as theoretically predicted and experimentally proven by the absorption spectra at visible and near-infrared regions. The NICS values and the 1H NMR chemical shifts of the s-indacene derivatives indicate their weak antiaromaticity. The different tropicities are explained by the modulation of the HOMO and HOMO-1 levels. In addition, for the hexaxylyl derivative, weak fluorescence from the S2 excited state was detected due to the large energy gap between the S1 and S2 states. Notably, an organic field-effect transistor (OFET) fabricated using the hexaxylyl derivative exhibited moderate hole carrier mobility, a result which opens the door for optoelectronic applications of s-indacene derivatives.
We report the thermodynamic and kinetic aqueous self-assembly of a series of amide-functionalized dithienyldiketopyrrolopyrroles (TDPPs) that bear various hydrophilic oligoethylene glycol (OEG) and hydrophobic alkyl chains. Spectroscopic and microscopic studies showed that the TDPP-based amphiphiles with an octyl group form sheet-like aggregates with J-type exciton coupling. The effect of the alkyl chains on the aggregated structure and the internal molecular orientation was examined via computational studies combining MD simulations and TD-DFT calculations. Furthermore, solvent and thermal denaturation experiments provided a state diagram that indicates the formation of unexpected nanoparticles during the self-assembly into nanosheets when longer OEG side chains are introduced. A kinetic analysis revealed that the nanoparticles were obtained selectively as an on-pathway intermediate state toward the formation of thermodynamically controlled nanosheets. The metastable aggregates were used for seed-initiated supramolecular assembly, which allowed establishing control over the assembly kinetics and the aggregate size. The sheet-like aggregates prepared using the seeding method exhibited coherent vibration in the excited state, indicating a well-ordered orientation of the TDPP units. These results underline the significance of fine tuning of the hydrophobic/hydrophilic balance in the molecular design to kinetically control the assembly of amphiphilic π-conjugated molecules into two-dimensional nanostructures in aqueous media.
Coloring Agents , Water , Kinetics , Hydrophobic and Hydrophilic Interactions , Water/chemistry
Photomechanical molecular crystals are promising materials for photon-powered artificial actuators. To interpret the photomechanical responses, the spatiotemporal distribution of photoproducts in crystals could be an important role in addition to molecular structures, molecular packings, illumination conditions, crystal morphology, crystal size, and so on. In this study, we have found that single crystals of 2,5-distyrylpyrazine show a smooth single-crystal-to-single-crystal photomechanical expansion, and the photochemical reaction propagates from the edge to the center of the single crystal. We revealed that the surface effect (special reactivity at the crystal surface) in addition to the cooperative effect (the reaction is facilitated by neighboring molecules) is essential for the edge-to-center propagation of the photochemical reaction. Our results would provide a foundation for future studies of the photochemical reaction dynamics in photomechanical molecular crystals.
A light-harvesting strategy is crucial for the utilisation of solar energy. In this study, we addressed the expanding light-harvesting (LH) wavelength of photosynthetic LH complex 2 (LH2, from Rhodoblastus acidophilus strain 10050) through covalent conjugation with extrinsic chromophores. To further understand the conjugation architecture and mechanism of excitation energy transfer (EET), we examined the effects of the linker length and spectral overlap integral between the emission and absorption spectra of the energy donor and acceptor pigments. In the former case, contrary to the intuition based on the Förster resonance energy transfer (FRET) theory, the observed energy transfer rate was similar regardless of the linker length, and the energy transfer efficiency increased with longer linkers. In the latter case, despite the energy transfer rate increases at higher spectral overlaps, it was quantitatively inconsistent with the FRET theory. The mechanism of EET beyond the FRET theory was discussed in terms of the higher-lying exciton state of B850, which mediates efficient EET despite the small spectral overlap. This systematic investigation provides insights for the development of efficient artificial photosynthetic systems.
Photosynthetic Reaction Center Complex Proteins , Light-Harvesting Protein Complexes/chemistry , Photosynthesis , Fluorescence Resonance Energy Transfer
Photoswitching molecules that reversibly switch upon visible-light irradiation are some of the most attractive targets for biological and imaging applications. In this study, we found a diarylethene (DAE) derivative having a covalently attached perylenebisimide (PBI) unit (DAE-PBI dyad) underwent an unexpected cyclization reaction upon irradiation with green (500-550 nm) light, where the DAE unit has no absorbance. The photoreactivity was enhanced in solvents containing heavy atoms and in the presence of oxygen. As inferred from the solvent dependence and the calculated excited-state energies of DAE and PBI units, it was suggested that the probable mechanism for this unique visible-light-induced cyclization reaction is multiplicity conversion based on intramolecular energy transfer from the excited singlet state of the PBI unit to the triplet state of DAE units (i.e., DAE-1[PBI]* â 3[DAE]*-PBI). Such a unique photoreaction mechanism with the assistance of oxygen will pave the way for new molecular design for the development of visible-light switching molecules.
Light , Oxygen , Cyclization , Energy Transfer , Solvents
Multicarrier dynamics in heterostructured ZnS-AgInS2 (ZAIS) dumbbell-like nanoparticle (nanodumbell), which consists of two visible-light absorptive domains (ellipsoidal tip domains) directly linked to each end of a 22 nm length rod domain of the ZAIS nanodumbell with a quasi-type-II heterostructure, was investigated by femtosecond transient absorption spectroscopy under variable excitation intensities. Quantitative analysis together with the numerical simulations for the excitation intensity dependence of the dynamics revealed that only one electron-hole pair survived in the overall dumbbell as a consequence of Auger recombination, even though multiple carriers were formed on both terminal tip domains. This result strongly suggested carrier-carrier interaction between the tip domains, leading to the long-range Auger recombination via tunneling across a rod potential barrier.
Pump-repump-probe spectroscopy with a burst mode of photoexcitation was applied to the direct observation of the photoionization dynamics of perylene in the solution phase. Irradiation of a pump pulse train generated with birefringent crystals effectively accumulated an intermediate S1 state and a repump pulse triggered photoionization in the higher excited state, ensuring sufficiently large signal intensity to probe. Two-photon excitation to the energy level, which is 0.7 eV lower than the ionization potential in the gas phase, results in instantaneous formation of the radical cation of perylene in acetonitrile, unlike aromatic amines in previous reports. In addition, subsequent recombination dynamics between the radical cation and ejected electron was monitored in polar and nonpolar solvents. The ultrafast recombination in nonpolar solvents suggests that the distribution of the distance in the cation-ejected electron pair largely evolves even in acetonitrile in the femtosecond timescale, in which the solvation is not completed and the dielectric constant is still low. The recombination process in acetonitrile was well reproduced with simulations based on the Smoluchowski equation taking account of the transient change in the dielectric constant by solvation.
Helically twisted conductive nanocarbon materials are applicable to optoelectronic and electromagnetic molecular devices working on the nanometer scale. Herein, we report the synthesis of per-peri-perbenzo[5]- and [9]helicenes in addition to previously reported π-extended [7]helicene. The homogeneously π-extended helicenes can be regarded as helically fused oligo-phenanthrenes. The HOMO-LUMO gap decreased significantly from 2.14 to 1.15 eV with increasing helical length, suggesting the large effective conjugation length (ECL) of the π-extended helical framework. The large ECL of π-extended helicenes is attributed to the large orbital interactions between the phenanthrene subunits at the 9- and 10-positions, which form a polyene-like electronic structure. Based on the experimental results and DFT calculations, the ultrafast decay dynamics on the sub-picosecond timescale were attributed to the low-lying conical intersection.
Photosynthetic light-harvesting (LH) systems consist of photosynthetic pigments, which are non-covalently self-assembled with protein scaffolds in many phototrophs and attain highly efficient excitation energy transfer via ultrafast dynamics. In this study, we constructed a biohybrid LH system composed of an LH complex (LH2) from Rhodoblastus acidophilus strain 10050 and a hydrophobic fluorophore ATTO647N (ATTO) as an extrinsic antenna in the lipid bilayer. Through the addition of ATTOs into a solution of LH2-reconstituted lipid vesicles, ATTOs were incorporated into the hydrophobic interior of the lipid bilayer to configure the non-covalently self-assembled biohybrid LH. Steady-state fluorescence spectroscopy clearly showed efficient energy transfer from ATTO to B850 bacteriochlorophylls in LH2. Femtosecond transient absorption spectroscopy revealed that the energy transfer took place in the time range of 3-13 ps, comparable to that of the covalently linked LH2-ATTO that we previously reported. In addition, the biohybrid LH system exhibited a much higher antenna effect than the LH2-ATTO system because of the higher loading level of ATTO in the membrane. These findings suggest that the facile self-assembled biohybrid LH system is a promising system for constructing LH for solar-energy conversion.
Light-Harvesting Protein Complexes , Lipid Bilayers , Bacterial Proteins/chemistry , Bacteriochlorophylls/metabolism , Energy Transfer , Light-Harvesting Protein Complexes/chemistry , Spectrometry, Fluorescence
Because supramolecular polymerization of emissive π-conjugated molecules depends strongly on π-π stacking interaction, the formation of well-defined one-dimensional nanostructures often results in a decrease or only a small increase of emission efficiency. This is also true for our barbiturate-based supramolecular polymers wherein hydrogen-bonded rosettes of barbiturates stack quasi-one-dimensionally through π-π stacking interaction. Herein we report supramolecular polymerization-induced emission of two regioisomeric 2,3-diphenylthiophene derivatives functionalized with barbituric acid and tri(dodecyloxy)benzyl wedge units. In CHCl3, both compounds are molecularly dissolved and accordingly poorly emissive due to a torsion-induced non-radiative decay. In methylcyclohexane-rich conditions, these barbiturates self-assemble to form crystalline nanofibers and exhibit strongly enhanced emission through supramolecular polymerization driven by hydrogen-bonding. Our structural analysis suggests that the barbiturates form a tape-like hydrogen-bonding motif, which is rationalized by considering that the twisted geometries of 2,3-diphenylthiophene cores prevend the competing rosettes from stacking into columnar supramolecular polymers. We also found that a small difference in the molecular polarity originating from the substitutional position of the thiophene core influences interchain association of the supramolecular polymers, affording different luminescent soft materials, gel and nanosheet.
We have investigated three-dimensional distribution and diffusion behaviors of single guest dyes in 1-µm thick films of poly(2-hydroxyethyl acrylate) (PHEA) by using astigmatism imaging method. Perylene diimide derivative (BP-PDI) in the PHEA films localized along the Z-axis at ca. Z = 600-700 nm distant from the interface (Z = 0) between PHEA and glass substrate. This Z-localization was not observed in different polymer films of poly(methyl methacrylate) (PMMA), poly(methyl acrylate) (PMA), and polystyrene (PSt). Because the glass transition temperature of the PHEA is lower than the room temperature, BP-PDI in the PHEA films exhibited Brownian motion, normal diffusion on the XY plane and confined motion along the Z-direction. For elucidating the mechanism of the peculiar localization of the guest dyes along film thickness in the PHEA films, we measured diffusion behaviors of different dyes, R6G and Atto 488, in 1-µm thick PHEA films, obtaining result that the Z-distributions of the dyes were overall similar to that of BP-PDI. The result indicates that the Z-localization of the guest dyes should be ascribed not to the interaction between glass surface and guest dye but mainly to the Z-dependent property of the PHEA film. Indeed, the lateral diffusion coefficients of the guest dyes depended on their Z-positions.
Nanotechnology , Polyhydroxyethyl Methacrylate , Glass , Polyhydroxyethyl Methacrylate/analogs & derivatives , Polyhydroxyethyl Methacrylate/chemistry , Temperature
