Impact of Trisulfide on the Structure and Function of Different Antibody Constructs.

Trisulfide is a post-translational modification (PTM) commonly found in recombinant antibodies. It has been demonstrated that trisulfide had no impact on the bioactivity of mono-specific antibodies (MsAbs). However, the impact of trisulfide on multi-specific antibodies has not been evaluated. In this study, two mass spectrometric methods were developed for comprehensive trisulfide characterization. The non-reduced peptide mapping method combined with the unique electron activated dissociation (EAD) provided signature fragments for confident trisulfide identification as well as trisulfide quantitation at individual sites. A higher throughput method using Fab mass analysis was also developed and qualified to support routine monitoring of trisulfide during process development. Fab mass analysis features simpler sample preparation and shorter analysis time but provides comparable results to the non-reduced peptide mapping method. In this study, a bi-specific (BsAb) and a tri-specific antibody (TsAb) were compared side-by-side with a MsAb to evaluate the impact of trisulfide on the structure and function of multi-specific antibodies. Results indicated that trisulfide dominantly formed at similar locations across different antibody constructs and had no impact on the size heterogeneity, charge heterogeneity, or bioactivities of any assessed antibodies. Together with the in vitro stability under heat stress (25 °C and 40 °C for up to four weeks) and rapid conversion from trisulfide to disulfide during in vivo circulation, trisulfide could be categorized as a non-critical quality attribute (non-CQA) for antibody products.

A highly sensitive and robust LC-MS platform for host cell protein characterization in biotherapeutics.

Host cell proteins (HCPs) are a major class of process-related impurities that need to be closely monitored during the production of biotherapeutics. Mass spectrometry (MS) has emerged as a promising tool for HCP analysis due to its specificity for individual HCP's identification and quantitation. However, utilization of MS as a routine characterization tool is still limited due to the time-consuming procedures, non-standardized instrumentation and methodologies, and the limited sensitivity compared to the enzyme-linked immunosorbent assays (ELISA). In this study, we introduced a sensitive (limit of detection (LOD) at 1-2 ppm) and robust HCP profiling platform method with suitable precision and accuracy that can be readily adopted to antibodies and other biotherapeutic modalities without the need for HCP enrichment. The NIST mAb and multiple in-house antibodies were analyzed, and results were benchmarked with other reported studies. In addition, a targeted analysis method with optimized sample preparation for absolute quantitation of lipases was developed and qualified with an LOD of 0.6 ppm and precision of <15%, which can be further improved to an LOD of 5 ppb by using the nano-flow LC.

Raman based chemometric model development for glycation and glycosylation real time monitoring in a manufacturing scale CHO cell bioreactor process.

The Quality by Design (QbD) approach to the production of therapeutic monoclonal antibodies (mAbs) emphasizes an understanding of the production process ensuring product quality is maintained throughout. Current methods for measuring critical quality attributes (CQAs) such as glycation and glycosylation are time and resource intensive, often, only tested offline once per batch process. Process analytical technology (PAT) tools such as Raman spectroscopy combined with chemometric modeling can provide real time measurements process variables and are aligned with the QbD approach. This study utilizes these tools to build partial least squares (PLS) regression models to provide real time monitoring of glycation and glycosylation profiles. In total, seven cell line specific chemometric PLS models; % mono-glycated, % non-glycated, % G0F-GlcNac, % G0, % G0F, % G1F, and % G2F were considered. PLS models were initially developed using small scale data to verify the capability of Raman to measure these CQAs effectively. Accurate PLS model predictions were observed at small scale (5 L). At manufacturing scale (2000 L) some glycosylation models showed higher error, indicating that scale may be a key consideration in glycosylation profile PLS model development. Model robustness was then considered by supplementing models with a single batch of manufacturing scale data. This data addition had a significant impact on the predictive capability of each model, with an improvement of 77.5% in the case of the G2F. The finalized models show the capability of Raman as a PAT tool to deliver real time monitoring of glycation and glycosylation profiles at manufacturing scale.

Implementation of a High-Resolution Liquid Chromatography-Mass Spectrometry Method in Quality Control Laboratories for Release and Stability Testing of a Commercial Antibody Product.

Liquid chromatography-mass spectrometry (LC-MS) has been widely used throughout biotherapeutic development. However, its implementation in GMP-compliant commercial quality control (QC) laboratories remains a challenge. In this publication, we describe the covalidation and implementation of an automated, high-throughput, and GMP compliant subunit LC-MS method for monitoring antibody oxidation for commercial product release and stability testing. To our knowledge, this is the first report describing the implementation of a high-resolution LC-MS method in commercial QC laboratories for product release and stability testing in the biopharmaceutical industry. This work paves the road for implementing additional LC-MS methods to modernize testing in commercial QC with more targeted control of product quality.

High-throughput LC-MS quantitation of cell culture metabolites.

Monitoring cell culture metabolites, including media components and cellular byproducts, during bio manufacturing is critical for gaining insights into cell growth, productivity and product quality. Historically, cell culture metabolite analysis was a complicated process requiring several orthogonal methods to cover the large number of metabolites with diverse properties over wide concentration ranges. These off-line analyses are time consuming and not suitable for real time bioreactor monitoring. In this study, we present a high-throughput LC-MS method with a 17-min cycle time that is capable of simultaneously monitoring 93 cell culture metabolites, including amino acids, nucleic acids, vitamins, sugars and others. This method has high precision and accuracy and has been successfully applied to the daily profiling of bioreactors and raw material qualification. Information obtained in these studies has been used to identify limiting amino acids during production, which guided adjustments to the feed strategy that prevented the potential misincorporation of amino acids. This type of metabolite profiling can be further utilized to build predictive process models for adaptive feedback control and pave the road for continuous manufacturing and real-time release testing.

Using bispecific antibodies in forced degradation studies to analyze the structure-function relationships of symmetrically and asymmetrically modified antibodies.

Forced degradation experiments of monoclonal antibodies (mAbs) aid in the identification of critical quality attributes (CQAs) by studying the impact of post-translational modifications (PTMs), such as oxidation, deamidation, glycation, and isomerization, on biological functions. Structure-function characterization of mAbs can be used to identify the PTM CQAs and develop appropriate analytical and process controls. However, the interpretation of forced degradation results can be complicated because samples may contain mixtures of asymmetrically and symmetrically modified mAbs with one or two modified chains. We present a process to selectively create symmetrically and asymmetrically modified antibodies for structure-function characterization using the bispecific DuoBody® platform. Parental molecules mAb1 and mAb2 were first stressed with peracetic acid to induce methionine oxidation. Bispecific antibodies were then prepared from a mixture of oxidized or unoxidized parental mAbs by a controlled Fab-arm exchange process. This process was used to systematically prepare four bispecific mAb products: symmetrically unoxidized, symmetrically oxidized, and both combinations of asymmetrically oxidized bispecific mAbs. Results of this study demonstrated chain-independent, 1:2 stoichiometric binding of the mAb Fc region to both FcRn receptor and to Protein A. The approach was also applied to create asymmetrically deamidated mAbs at the asparagine 330 residue. Results of this study support the proposed 1:1 stoichiometric binding relationship between the FcγRIIIa receptor and the mAb Fc. This approach should be generally applicable to study the potential impact of any modification on biological function.

Quantitative analysis of glycation and its impact on antigen binding.

Glycation has been observed in antibody therapeutics manufactured by the fed-batch fermentation process. It not only increases the heterogeneity of antibodies, but also potentially affects product safety and efficacy. In this study, non-glycated and glycated fractions enriched from a monoclonal antibody (mAb1) as well as glucose-stressed mAb1 were characterized using a variety of biochemical, biophysical and biological assays to determine the effects of glycation on the structure and function of mAb1. Glycation was detected at multiple lysine residues and reduced the antigen binding activity of mAb1. Heavy chain Lys100, which is located in the complementary-determining region of mAb1, had the highest levels of glycation in both stressed and unstressed samples, and glycation of this residue was likely responsible for the loss of antigen binding based on hydrogen/deuterium exchange mass spectrometry analysis. Peptide mapping and intact liquid chromatography-mass spectrometry (LC-MS) can both be used to monitor the glycation levels. Peptide mapping provides site specific glycation results, while intact LC-MS is a quicker and simpler method to quantitate the total glycation levels and is more useful for routine testing. Capillary isoelectric focusing (cIEF) can also be used to monitor glycation because glycation induces an acidic shift in the cIEF profile. As expected, total glycation measured by intact LC-MS correlated very well with the percentage of total acidic peaks or main peak measured by cIEF. In summary, we demonstrated that glycation can affect the function of a representative IgG1 mAb. The analytical characterization, as described here, should be generally applicable for other therapeutic mAbs.

Orthogonal Mass Spectrometry-Based Footprinting for Epitope Mapping and Structural Characterization: The IL-6 Receptor upon Binding of Protein Therapeutics.

Higher-order structure (HOS) is a crucial determinant for the biological functions and quality attributes of protein therapeutics. Mass spectrometry (MS)-based protein footprinting approaches play an important role in elucidating the relationship between protein biophysical properties and structure. Here, we describe the use of a combined method including hydrogen-deuterium exchange (HDX), fast photochemical oxidation of proteins (FPOP), and site-specific carboxyl group footprinting to investigate the HOS of protein and protein complexes. The work focuses on implementing complementary solution-phase footprinting approaches that differ in time scale, specificity for protein residue side chains vs backbone as well as selectivity for different residue types to map integratively the epitope of human interleukin-6 receptor (IL-6R) for two adnectins with distinct affinities (Kd, Adnectin1 ∼ 6.2 pM vs Kd, Adnectin2 ∼ 46 nM). Furthermore, the study evaluates the resultant conformation/dynamic change of IL-6R. The suggested epitope, which is conserved for adnectin1 and adnectin2 binding, is a flexible loop that connects two ß-strands in the cytokine-binding domain (DII) of IL-6R. We also found that adnectin1, the more strongly binding ligand, induces structural perturbations on two unstructured loops that are distally located beyond the epitope. Those changes are either attenuated or not detected for the case of adnectin2 binding. In addition to providing credibility in epitope determination, utilization of those combined approaches reveals the structural effects that can differentiate protein therapeutics with apparently similar biophysical properties.

Subunit mass analysis for monitoring antibody oxidation.

Methionine oxidation is a common posttranslational modification (PTM) of monoclonal antibodies (mAbs). Oxidation can reduce the in-vivo half-life, efficacy and stability of the product. Peptide mapping is commonly used to monitor the levels of oxidation, but this is a relatively time-consuming method. A high-throughput, automated subunit mass analysis method was developed to monitor antibody methionine oxidation. In this method, samples were treated with IdeS, EndoS and dithiothreitol to generate three individual IgG subunits (light chain, Fd' and single chain Fc). These subunits were analyzed by reversed phase-ultra performance liquid chromatography coupled with an online quadrupole time-of-flight mass spectrometer and the levels of oxidation on each subunit were quantitated based on the deconvoluted mass spectra using the UNIFI software. The oxidation results obtained by subunit mass analysis correlated well with the results obtained by peptide mapping. Method qualification demonstrated that this subunit method had excellent repeatability and intermediate precision. In addition, UNIFI software used in this application allows automated data acquisition and processing, which makes this method suitable for high-throughput process monitoring and product characterization. Finally, subunit mass analysis revealed the different patterns of Fc methionine oxidation induced by chemical and photo stress, which makes it attractive for investigating the root cause of oxidation.

Understanding the Impact of Methionine Oxidation on the Biological Functions of IgG1 Antibodies Using Hydrogen/Deuterium Exchange Mass Spectrometry.

Hydrogen/deuterium exchange mass spectrometry (HDX MS) was used in two case studies to evaluate the impact of methionine (Met) oxidation on the biological functions of IgG1 antibodies. In the first case study, linear correlations were observed between the oxidation of the conserved Fc methionine residues and the loss of neonatal Fc receptor (FcRn) binding and complement-dependent cytotoxicity (CDC) activity. Both heavy chain (HC) residues Met257 and Met433 were located near the FcRn binding interface as indicated by HDX MS and structural modeling; however, HC Met257 oxidation was further demonstrated to have a more significant impact on FcRn binding than HC Met433 oxidation. In addition, oxidation of HC Met257 and HC Met433 could disrupt protein conformation at the CH2-CH3 interface and prevent IgG oligomerization, which is needed for C1q binding and subsequent CDC activity. In the second case study, HDX MS demonstrated that oxidation of the two complementary determining region (CDR) methionine residues had little or no impact on antigen binding of the antibody. Together, these results suggested that HDX MS is a powerful tool for evaluating the impact of individual post translational modifications (PTMs) on the biological activities of antibodies, even when the PTM levels are relatively low. The high selectivity and sensitivity of this method makes it a valuable tool for assisting the critical quality attributes (CQAs) assessment of antibodies.

Quantification of in vivo site-specific Asp isomerization and Asn deamidation of mAbs in animal serum using IP-LC-MS.

BACKGROUND: Isomerization of aspartic acid and deamidation of asparagine are two common amino acid modifications that are of particular concern if located within the complementarity-determining region of therapeutic antibodies. Questions arise as to the extent of modification occurring in circulation due to potential exposure of the therapeutic antibody to different pH regimes. RESULTS: To enable evaluation of site-specific isomerization and deamidation of human mAbs in vivo, immunoprecipitation (IP) has been combined with LC-MS providing selective enrichment, separation and detection of naive and modified forms of tryptic peptides comprising complementarity-determining region sequences. CONCLUSION: IP-LC-MS can be applied to simultaneously quantify in vivo drug concentrations and measure the extent of isomerization or deamidation in PK studies conducted during the drug discovery stage.

Fast photochemical oxidation of proteins (FPOP) maps the epitope of EGFR binding to adnectin.

Epitope mapping is an important tool for the development of monoclonal antibodies, mAbs, as therapeutic drugs. Recently, a class of therapeutic mAb alternatives, adnectins, has been developed as targeted biologics. They are derived from the 10th type III domain of human fibronectin ((10)Fn3). A common approach to map the epitope binding of these therapeutic proteins to their binding partners is X-ray crystallography. Although the crystal structure is known for Adnectin 1 binding to human epidermal growth factor receptor (EGFR), we seek to determine complementary binding in solution and to test the efficacy of footprinting for this purpose. As a relatively new tool in structural biology and complementary to X-ray crystallography, protein footprinting coupled with mass spectrometry is promising for protein-protein interaction studies. We report here the use of fast photochemical oxidation of proteins (FPOP) coupled with MS to map the epitope of EGFR-Adnectin 1 at both the peptide and amino-acid residue levels. The data correlate well with the previously determined epitopes from the crystal structure and are consistent with HDX MS data, which are presented in an accompanying paper. The FPOP-determined binding interface involves various amino-acid and peptide regions near the N terminus of EGFR. The outcome adds credibility to oxidative labeling by FPOP for epitope mapping and motivates more applications in the therapeutic protein area as a stand-alone method or in conjunction with X-ray crystallography, NMR, site-directed mutagenesis, and other orthogonal methods.

The influence of adnectin binding on the extracellular domain of epidermal growth factor receptor.

The precise and unambiguous elucidation and characterization of interactions between a high affinity recognition entity and its cognate protein provides important insights for the design and development of drugs with optimized properties and efficacy. In oncology, one important target protein has been shown to be the epidermal growth factor receptor (EGFR) through the development of therapeutic anticancer antibodies that are selective inhibitors of EGFR activity. More recently, smaller protein derived from the 10th type III domain of human fibronectin termed an adnectin has also been shown to inhibit EGFR in clinical studies. The mechanism of EGFR inhibition by either an adnectin or an antibody results from specific binding of the high affinity protein to the extracellular portion of EGFR (exEGFR) in a manner that prevents phosphorylation of the intracellular kinase domain of the receptor and thereby blocks intracellular signaling. Here, the structural changes induced upon binding were studied by probing the solution conformations of full length exEGFR alone and bound to a cognate adnectin through hydrogen/deuterium exchange mass spectrometry (HDX MS). The effects of binding in solution were identified and compared with the structure of a bound complex determined by X-ray crystallography.ᅟ

Hydrogen/deuterium exchange mass spectrometry for probing higher order structure of protein therapeutics: methodology and applications.

The higher order structure of protein therapeutics can be interrogated with hydrogen/deuterium exchange mass spectrometry (HDX-MS). HDX-MS is now a widely used tool in the structural characterization of protein therapeutics. In this review, HDX-MS based workflows designed for protein therapeutic discovery and development processes are presented, focusing on the specific applications of epitope mapping for protein/drug interactions and biopharmaceutical comparability studies. Future trends in the application of HDX-MS in protein therapeutics characterization are also described.

Characterization of disulfide linkages in recombinant human granulocyte-colony stimulating factor.

RATIONALE: Recombinant human G granulocyte-colony stimulating factor (rhG-CSF) produced in Escherichia coli is a non-glycosylated polypeptide containing five cysteine residues. The reported major disulfide (S-S) linkages in mature human G-CSF are C36 -C42 and C64 -C74 , leaving C17 as a free cysteine, which could potentially result in S-S scrambling. The purpose of this work is to illustrate different mass spectrometry (MS) approaches for characterization of S-S linkages in therapeutic proteins including S-S scrambling using rhG-CSF as a model protein. METHODS: Peptide mapping analysis of both non-reduced and reduced digests of rhG-CSF was performed to demonstrate the presence of S-S linked peptides and their corresponding reduced peptides. High mass accuracy measurements of these peptides provided the initial identifications of S-S linkages. Collision-induced dissociation (CID) and electron transfer dissociation (ETD) were used to fragment these peptides in order to obtain further sequence information and identify S-S linkages. RESULTS: S-S linked peptides and their corresponding reduced peptides correlating with major S-S linkages were observed. Peptides that correlated with other S-S linkages as a result of S-S scrambling were also observed. CONCLUSIONS: Presence of the reported major S-S linkages in rhG-CSF was confirmed. S-S scrambling was also observed in which C18 was involved in S-S linkages and C37 , C65 or C75 were present as free cysteines. This study demonstrates the practical utility of combining different MS methods for characterization of S-S linkages in therapeutic proteins.

Structural mass spectrometry in biologics discovery: advances and future trends.

Mass spectrometry (MS) is one of the key techniques in protein characterization. In this article, the workflow for MS-based structural characterization of biologics in biopharmaceutical drug discovery is presented, including characterization of primary and higher order structures. Advances in MS techniques in protein characterization are illustrated, including electron transfer dissociation MS (ETD-MS) for primary structure analysis and hydrogen/deuterium exchange MS (HDX-MS) for probing protein higher order structures and mapping epitopes. Future trends in applications of MS to evaluate and optimize candidate molecules in biologics stability studies is also described.

Characterization of nucleic acid higher order structure by gas-phase H/D exchange in a quadrupole-FT-ICR mass spectrometer.

Nucleic acid higher order structure is of intense interest in antisense and antigene strategies toward novel chemotherapeutic agents. Understanding how structural characteristics affect solution-phase properties is essential for a rational approach to nucleic acid-targeted drug design. The most dominant nucleic acid secondary structure is the hairpin, formed by intrastrand hydrogen bonding between complementary nucleobases. We have previously applied gas-phase hydrogen/deuterium exchange (HDX) with mass spectrometry detection to show that anionic DNA duplexes have lower HDX rates than their constituent monomers, indicating that hydrogen bonding can shield hydrogens from exchanging with the bath gas D(2)S. The same HDX assay is applied here to investigate nucleic acid hairpin structure. Variations in hairpin solution-phase stabilities are achieved by changing their loop size, stem length, and stem composition (ratio of G/C and A/T(U) base pairs in the stem). These differences can be carried into the gas phase because electrospray ionization is a gentle ionization method that is able to preserve noncovalent interactions. Observed gas-phase HDX rates of these hairpins are consistent with their relative solution-phase stabilities as predicted by MFold, i.e., less stable nucleic acid hairpins exchange faster than more stable hairpins. To our knowledge, the presented experiments demonstrate for the first time that gas-phase HDX may be used to characterize nucleic acid higher order structure and the results suggest that the relative stabilities of nucleic acid hairpins in the gaseous phase are correlated with those in solution.

A rugged free energy landscape separates multiple functional RNA folds throughout denaturation.

The dynamic mechanisms by which RNAs acquire biologically functional structures are of increasing importance to the rapidly expanding fields of RNA therapeutics and biotechnology. Large energy barriers separating misfolded and functional states arising from alternate base pairing are a well-appreciated characteristic of RNA. In contrast, it is typically assumed that functionally folded RNA occupies a single native basin of attraction that is free of deeply dividing energy barriers (ergodic hypothesis). This assumption is widely used as an implicit basis to interpret experimental ensemble-averaged data. Here, we develop an experimental approach to isolate persistent sub-populations of a small RNA enzyme and show by single molecule fluorescence resonance energy transfer (smFRET), biochemical probing and high-resolution mass spectrometry that commitment to one of several catalytically active folds occurs unexpectedly high on the RNA folding energy landscape, resulting in partially irreversible folding. Our experiments reveal the retention of molecular heterogeneity following the complete loss of all native secondary and tertiary structure. Our results demonstrate a surprising longevity of molecular heterogeneity and advance our current understanding beyond that of non-functional misfolds of RNA kinetically trapped on a rugged folding-free energy landscape.

Oligonucleotide gas-phase hydrogen/deuterium exchange with D2S in the collision cell of a quadrupole-Fourier transform ion cyclotron resonance mass spectrometer.

We have implemented gas-phase hydrogen/deuterium exchange (HDX) experiments in the external collision cell of a hybrid quadrupole-Fourier transform ion cyclotron resonance mass spectrometer. In this configuration, multiply charged oligonucleotide anions undergo significant exchange with D(2)S at reaction intervals ranging from 0.11 to 60.1 s. For DNA homohexamers, relative exchange rates were dC(6) approximately dA(6) > dG(6) > dT(6), correlating with the gas-phase acidities of nucleobases (C > A > T > G), except for guanine. Our results are consistent with a relay mechanism in which D(2)S interacts with both a backbone phosphate group and a neutral nucleobase through hydrogen bonding. We propose that the faster exchange of polyguanosine compared to polythymidine is due to the larger size of guanine and the orientation of its labile hydrogens, which may result in gas-phase conformations more favorable for forming complexes with D(2)S. Similar trends were observed for RNA homohexamers, although their HDX rates were faster than for DNA, suggesting they can also exchange via another relay process involving the 2'-hydroxyl group. HDX of DNA duplexes further supports the involvement of nucleobase hydrogens because duplexes exchanged slower than their corresponding single strands, presumably due to the intermolecular hydrogen bonds between nucleobases. This work constitutes the first investigation of the mechanisms of oligonucleotide gas-phase HDX. Our results on duplexes show promise for application of this strategy to the characterization of structured nucleic acids.

Characterization of nucleic acid higher order structure by high-resolution tandem mass spectrometry.

Mass spectrometry (MS) is extensively used for the identification and sequencing of nucleic acids but has so far seen limited use for characterization of their higher order structures. Here, we have applied a range of different tandem mass spectrometry techniques, including electron detachment dissociation (EDD), infrared multiphoton dissociation (IRMPD), activated ion (AI) EDD, and EDD/IRMPD MS(3), in a Fourier transform ion cyclotron resonance mass spectrometer to the characterization of three isomeric 15mer DNAs with different sequences and predicted solution-phase structures. Our goal was to explore whether their structural differences could be directly probed with these techniques. We found that all three 15mers had higher order structures in the gas phase, although preferred structures were predicted for only two of them in solution. Nevertheless, EDD, AI EDD, and EDD/IRMPD MS(3) experiments yielded different cleavage patterns with less backbone fragmentation for the more stable solution-phase structure than for the other two 15mers. By contrast, no major differences were observed in IRMPD, although the extent of backbone cleavage was higher with that technique for all three 15mers. Thus, experiments utilizing the radical ion chemistry of EDD can provide complementary structural information compared to traditional slow heating methods, such as IRMPD, for structured nucleic acids.