Detection of water pollutants using super-hydrophobic porous silicon-based SERS substrates.

Super hydrophobic porous silicon surface is prepared using a wet chemical synthesis route. Scanning electron microscopic investigation confirms a correlation between pore size and reaction time. SERS substrates are prepared by silver nanoparticle deposition on porous silicon surface. They exhibit excellent characteristics in terms of sensitivity, reproducibility, stability, and uniformity. They could detect rhodamine 6G in femtomolar range with SERS enhancement factor of ~ 6.1 × 1012, which is best ever reported for these substrates. Molecule-specific sensing of water pollutants such as methylene blue, glyphosate, and chlorpyrifos, is demonstrated for concentrations well below their permissible limits along with excellent enhancement factors. Porous silicon substrate functionalized with Ag nanoparticles demonstrates to be a promising candidate for low-cost, long-life, reliable sensors for environmental conservation applications.

Smart Nanofibrous Hydrogel Wound Dressings for Dynamic Infection Diagnosis and Control: Soft but Functionally Rigid.

Chronic wounds, such as burns and diabetic foot ulcers, pose significant challenges to global healthcare systems due to prolonged hospitalization and increased costs attributed to susceptibility to bacterial infections. The conventional use of antibiotic-loaded and metal-impregnated dressings exacerbates concerns related to multidrug resistance and skin argyrosis. In response to these challenges, our research introduces a unique approach utilizing antibiotic-free smart hydrogel wound dressings with integrated infection eradication and diagnostic capabilities. Electrospinning stands out as a method capable of producing hydrogel nanofibrous materials possessing favorable characteristics for treating wounds and detecting infections under conditions utilizing sustainable materials. In this study, innovative dressings are fabricated through electrospinning polycaprolactone (PCL)/gelatin (GEL) hybrid hydrogel nanofibers, incorporating pDA as a cross-linker, εPL as a broad-spectrum antimicrobial agent, and anthocyanin as a pH-responsive probe. The developed dressings demonstrate exceptional antioxidant (>90% radical scavenging) and antimicrobial properties (95-100% killing). The inclusion of polyphenols/flavonoids and εPL leads to absolute bacterial eradication, and in vitro assessments using HaCaT cells indicate increased cell proliferation, decreased reactive oxygen species (ROS) production, and enhanced cell viability (100% Cell viability). The dressings display notable alterations in color that correspond to different wound conditions. Specifically, they exhibit a red/violet hue under healthy wound conditions (pH 4-6.5) and a green/blue color under unhealthy wound conditions (pH > 6.5). These distinctive color changes provide valuable insights into the versatile applications of the dressings in the care and management of wounds. Our findings suggest that these antibiotic-free smart hydrogel wound dressings hold promise as an effective and sustainable solution for chronic wounds, providing simultaneous infection control and diagnostic monitoring. This research contributes to advancing the field of wound care, offering a potential paradigm shift in the development of next-generation wound dressings.

Development of copper impregnated bio-inspired hydrophobic antibacterial nanocoatings for textiles.

Due to their bactericidal and fluid repellent capabilities, antimicrobial textiles with hydrophobic properties have aroused a lot of interest in healthcare, hygiene, air purifiers, water purification systems, food packaging, and other domains. Silver and silver-derived compounds have long been employed in antimicrobial coatings; nevertheless, they are costly, limiting their widespread use. In this work, we combined mussel-inspired polydopamine (pDA) coating chemistry with graphene oxide (GO) and antimicrobial copper compounds (Cu(NO3)2, CuCl2, Cu nanoparticles (CuNPs), and Cu-Carbon nanofibers (Cu-CNF)) to create hydrophobic antimicrobial nanocoatings on cotton fabric. The structural, morphological, wettability, and antibacterial characteristics of the produced coatings were evaluated. The fabric coated with Cu(NO3)2 and CuNPs had good hydrophobicity, which was stabilized for 30 min following GO integration. The coated fabric with GO and CuNPs showed 100% bacterial inhibition for S. aureus and a 99.995% reduction for P. aeruginosa bacteria. Overall, this bioinspired approach to developing antimicrobial coatings on fabric utilizing Cu(NO3)2 and CuNPs with GO shows a lot of promise in preventing the transmission of bacterial and viral infections through contaminated garments and has potential in designing clothing for healthcare settings such as PPEs, gowns, aprons, face mask filters, curtains, and so on.

Advancements in spontaneous microbial desalination technology for sustainable water purification and simultaneous power generation: A review.

Population growth and rapid urbanization have put a lot of pressure on the already scarce freshwater around the globe. The availability of freshwater is not only limited but it is non-uniform also. Available desalination technologies help mitigate water shortage; however, these techniques are energy-intensive and unsustainable. Desalination technologies utilizing renewable energy and bio-electrochemical systems have been developed to achieve limited sustainability. With technological advancements, microbial desalination cell (MDC) has been developed which is capable of desalination, wastewater treatment, and power generation simultaneously. This review critically examined the performance of various MDC techniques concerning their stimulus parameters including COD removal, total desalination rate, total dissolved solids reduction rate, Coulombic efficiency, and power density. Limitations of MDCs have also been incorporated in the review. Work on MDC coupled with other robust desalination techniques offering advantages such as better desalination and more water recovery e.g. osmotic-MDC etc. has been included. Researchers have tremendously worked on MDCs with different electro-catalysts. Few of these are not sustainable and costly. Authors have reviewed critically with belief that it will pave a way for the commercialization of this eco-friendly technology.

A nickel oxide-decorated in situ grown 3-D graphitic forest engrained carbon foam electrode for microbial fuel cells.

A facile and single-step nickel oxide-dispersed in situ grown 3-D graphitic forest engrained carbon foam (NiO-CNF-CF)-based electrode was fabricated for high-performance microbial fuel cells (MFCs). The metal oxide, graphitic contents, biocompatibility, stability and large surface area available in the material for biofilm formation rendered the prepared electrode competent for wastewater treatment and bioenergy (0.79 V and 1.955 W m-2) generation with a coulombic efficiency of 85.66%.

Sodium hypochlorite is more effective than 70% ethanol against biofilms of clinical isolates of Staphylococcus aureus.

INTRODUCTION: Although disinfectants are used for eradication of bacteria from environmental surfaces, their antibiofilm efficacy is often not considered in determining the choice of disinfectant. AIM: This study aimed to compare the effectiveness of 2 commonly used disinfectants, sodium hypochlorite and ethanol, against the planktonic and biofilm state of Staphylococcus aureus clinical isolates. MATERIALS AND METHODS: Effect of 0.6% sodium hypochlorite and 70% ethanol was determined on the planktonic and biofilm states of 10 strong and weak biofilm formers through estimation of changes in colony forming unit counts and absorbance values. The morphologic changes were observed by scanning electron microscopy. RESULTS: Significant difference in the efficacy of sodium hypochlorite and ethanol was observed against the biofilm (P = .004) as well as planktonic (P = .000) states of S aureus. However, no significant difference was observed in their activity against strong and weak biofilm formers. On electron microscopy, sodium hypochlorite was found to induce significant formation of craters and irregular depressions on the surface of strong biofilm formers. CONCLUSIONS: Sodium hypochlorite demonstrated superior efficacy in controlling both planktonic and biofilm states of growth in S aureus. Furthermore, the characteristic morphologic changes observed in strong biofilm formers hint at its biofilm-specific activity.