RESUMEN
Original α-aminobisphosphonate-based copolymers were synthesized and successfully used for actinide complexation. For this purpose, poly(α-chloro-ε-caprolactone-co-ε-caprolactone)-b-poly(ethylene glycol)-b-poly(α-chloro-ε-caprolactone-co-ε-caprolactone) copolymers were first prepared by ring-opening copolymerization of ε-caprolactone (εCL) and α-chloro-ε-caprolactone using poly(ethylene glycol) (PEG) as a macro-initiator and tin(II) octanoate as a catalyst. The chloride functions were then converted to azide moieties by chemical modification, and finally α-aminobisphosphonate alkyne ligand (TzBP) was grafted using click chemistry, to afford well-defined poly(αTzBPεCL-co-εCL)-b-PEG-b-poly(αTzBPεCL-co-εCL) copolymers. Three copolymers, showing different α-aminobisphosphonate group ratios, were prepared (7, 18, and 38%), namely, CP8, CP9, and CP10, respectively. They were characterized by 1H and 31P NMR and size exclusion chromatography. Sorption properties of these copolymers were evaluated by isothermal titration calorimetry (ITC) with neodymium [Nd(III)] and cerium [Ce(III)] cations, used as surrogates of actinides, especially uranium and plutonium, respectively. ITC enabled the determination of the full thermodynamic profile and the calculation of the complete set of thermodynamic parameter (ΔH, TΔS, and ΔG), with the Ka constant and the n stoichiometry. The results showed that the number of cations sorbed by the functional copolymers logically increased with the number of bisphosphonate functions borne by the macromolecular chain, independently of the complexed cation. Additionally, CP9 and CP10 copolymers showed higher sorption capacities [21.4 and 34.0 mg·g-1 for Nd(III) and 9.6 and 14.3 mg·g-1 for Ce(III), respectively] than most of the systems previously described in the literature. CP9 also showed a highest binding constant (7000 M-1). These copolymers, based on non-toxic and biocompatible poly(ε-caprolactone) and PEG, are of great interest for external body decontamination of actinides as they combine high number of complexing groups, thus leading to great decontamination efficiency, and limited diffusion through the skin due to their high-molecular weight, thus avoiding additional possible internal contamination.
Asunto(s)
Elementos de Series Actinoides , Polietilenglicoles , Polietilenglicoles/química , Polímeros/química , Poliésteres/química , CationesRESUMEN
We report herein a study on the alcohol-free, ring-opening polymerization of trimethylene carbonate (TMC) in THF, catalyzed by 1,5,7-triazabicyclo [4.4.0] ec-5-ene (TBD) with ratios nTBD/nTMC ranging between 1/20 and 1/400. In all cases, the reaction proceeds very rapidly, even faster than in the presence of alcohol initiators, and provides PTMC with molecular weights up to Mn = 34,000 g mol-1. Characterization of the obtained PTMC samples by MALDI-TOF mass spectrometry, triple detection size exclusion chromatography and 1H NMR spectroscopy reveals the presence of both linear and cyclic polymer chains.
RESUMEN
A series of amphiphilic and thermo-responsive block copolymers were synthesized by reductive amination between the aldehyde endgroup of hydrophilic HPMC and the amine group of monoamine, diamine, or triamine JEFFAMINE as hydrophobic block. The resulting diblock, triblock and three-armed copolymers with different hydrophilic/hydrophobic ratios and block lengths were characterized by NMR, FT-IR, DOSY-NMR and SEC. The cloud point (CP) of copolymers was determined by UV-visible spectrometer. Data show that both the geometrical structure and the molar mass of HPMC affect the CP of HPMC-JEF copolymers. The higher the hydrophilic/hydrophobic ratio, the higher the CP of copolymers which is lower than that of HPMC homopolymers. The self-assembly behavior of the copolymers was investigated from dynamic light scattering, transmission electron microscopy, and critical micelle concentration (CMC) measurements. Spherical nano-micelles are obtained by self-assembly of copolymers in aqueous solution, and the micelle size can be tailored by varying the block length of HPMC and the geometrical structure. Three-armed HPMC-JEF copolymers present lower CMC and smaller micelle size as compared to linear diblock and triblock ones. MTT assay evidenced the cytocompatibility of HPMC-JEF copolymers, indicating that they could be promising as drug carrier in drug delivery systems.
Asunto(s)
Derivados de la Hipromelosa/química , Micelas , Polímeros/química , Tensoactivos/química , Fenómenos Químicos , Interacciones Hidrofóbicas e Hidrofílicas , Estructura Molecular , Polímeros/síntesis química , Análisis Espectral , TermodinámicaRESUMEN
We report the synthesis by RAFT polymerization of well-defined diblock copolymers bearing carbamoylmethylphosphonate moieties which proved to sorb gadolinium. These poly(diethyl-6-(acrylamido)hexylcarbamoylmethylphosphonate-b-acrylic acid) (P(CPAAm6C-b-AA)) copolymers were able to self-assemble as a function of temperature, above their cloud point value.
RESUMEN
Thermo-responsive brush-like amphiphilic poly[2-(2-methoxyethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methacrylate]-b-poly(l-lactide)-b-poly[2-(2-methoxyethoxy) ethyl methacrylate-co-oligo(ethylene glycol) methacrylate] [P(MEO2MA-co-OEGMA)-b-PLLA-b-P(MEO2MA-co-OEGMA)] triblock copolymers were synthesized by atom transfer radical polymerization of MEO2MA and OEGMA co-monomers using a α,ω-Bromopropionyl poly(l-lactide) (Br-PLLA-Br) macroinitiator. The resulting copolymers with MEO2MA/OEGMA molar ratio ranging from 79/21 to 42/58 were characterized by (1)H nuclear magnetic resonance and size exclusion chromatography. Thermo-responsive micelles were obtained by self-assembly of copolymers in aqueous medium. The micelles are spherical in shape with sizes varying from 20.7 to 102.5 nm. A hydrophobic anticancer drug, curcumin, was encapsulated in micelles by using membrane hydration method. The properties of drug loaded micelles were determined by dynamic light scattering, transmission electron microscopy and lower critical solution temperature (LCST) measurements. The micelles size decreases from 102.5 nm for blank micelles to 37.6 nm with 10.8% drug loading, suggesting that the drug plays an important role in the micellization procedure. The LCST decreases from 45.1°C for blank micelles to 40.6 and 38.3°C with 5.9 and 10.8% drug loading, respectively. In vitro drug release was performed in pH 7.4 PBS at different temperatures. Data show that the release rate was significantly enhanced above the LCST comparing with that below the LCST. The amount of released drug at 41°C was ca. 20% higher than that at 37°C. Burst-like release was depressed due to enhanced interaction between drug with hydrophobic PLA and PMA chains.
Asunto(s)
Poliésteres/química , Polietilenglicoles/química , Polímeros/química , Resinas Acrílicas/química , Antineoplásicos/química , Cromatografía en Gel/métodos , Curcumina/química , Portadores de Fármacos/química , Liberación de Fármacos , Interacciones Hidrofóbicas e Hidrofílicas , Metacrilatos/química , Micelas , Tamaño de la Partícula , Soluciones/química , TemperaturaRESUMEN
Thermo-responsive micelles are prepared by self-assembly of amphiphilic triblock copolymers composed of a poly(l-lactide) (PLLA) central block and two poly(N-isopropylacrylamide-co-N,N-dimethylacrylamide) (P(NIPAAm-co-DMAAm)) lateral blocks, using solvent evaporation/film hydration method. The resulting micelles exhibit very low critical micelle concentration (CMC) which slightly increases from 0.0113 to 0.0144 mg mL(-1) while the DMAAm content increases from 31.8 to 39.4% in the hydrophilic P(NIPAAm-co-DMAAm) blocks. The lower critical solution temperatures (LCST) of copolymers varies from 44.7 °C to 49.4 °C in water as determined by UV spectroscopy, and decreases by ca. 3.5 °C in phosphate buffered saline (PBS). Curcumin was encapsulated in the core of micelles. High drug loading up to 20% is obtained with high loading efficiency (>94%). The LCST of drug loaded micelles ranges from 37.5 to 38.0 °C with drug loading increasing from 6.0 to 20%. The micelles with diameters ranging from 47.5 to 88.2 nm remain stable over one month due to the negative surface charge as determined by zeta potential (-12.4 to -18.7 mV). Drug release studies were performed under in vitro conditions at 37 °C and 40 °C, i.e. below and above the LCST, respectively. Initial burst release is observed in all cases, followed by a slower release. The release rate is higher at 40 °C than that at 37 °C due to thermo-responsive release across the LCST. On the other hand, micelles with lower drug loading exhibit higher release rate than those with higher drug loading, which is assigned to the solubility effect. Peppas' theory was applied to describe the release behaviors. Moreover, the in vitro cytotoxicity of copolymers was evaluated using MTT assay. The results show that the copolymers present good cytocompatibility. Therefore, the nano-scale size, low CMC, high drug loading and stability, as well as good biocompatibility indicate that these thermo-responsive triblock copolymer micelles present a good potential as carrier for targeted delivery of anticancer drugs.
Asunto(s)
Resinas Acrílicas/química , Curcumina/administración & dosificación , Sistemas de Liberación de Medicamentos , Poliésteres/química , Animales , Antineoplásicos/administración & dosificación , Antineoplásicos/química , Línea Celular Tumoral , Química Farmacéutica/métodos , Curcumina/química , Portadores de Fármacos/química , Liberación de Fármacos , Estabilidad de Medicamentos , Almacenaje de Medicamentos , Humanos , Interacciones Hidrofóbicas e Hidrofílicas , Ratones , Micelas , Nanopartículas , Tamaño de la Partícula , Polímeros/química , TemperaturaRESUMEN
Thermo-responsive triblock copolymers were synthesized by atom transfer radical polymerization of N-isopropyl acrylamide (NIPAAm) and N,N-dimethyl acrylamide (DMAAm) using α,ω-bromopropionyl poly(l-lactide) as the macro-initiator and a CuCl/tris(2-dimethylaminoethyl) amine (Me6TREN) complex as the catalyst. The polymerization was realized at 25 °C in a DMF-water mixture. DMAAm was incorporated in the copolymer as a hydrophilic comonomer in order to tune the lower critical solution temperature (LCST). The LCST linearly increases from 32.2 to 39.1 °C upon increasing the DMAAm content from 0 to 24%. The phase transition of polymeric micelles at the LCST occurs in a narrow temperature interval below 0.5 °C. Reversible size changes are observed when the temperature increases from 25 to 45 °C and then decreases down to 25 °C. Nano-size micelles (37 to 54 nm) with narrow distribution were obtained by self-assembly of amphiphilic copolymers in aqueous medium. The critical micelle concentration (CMC) ranges from 0.010 to 0.015 mg mL-1. In vitro drug release studies show a much faster release at temperatures above the LCST. The MTT assay was conducted to evaluate the cytotoxicity of copolymers. Therefore, the nano-scale size, low CMC, rapid phase transition, LCST slightly above body temperature and thermo-responsive drug release indicate that these copolymers could be potential candidates for applications in targeted delivery of drugs.
RESUMEN
In this paper, original thermosensitive copolymers bearing phosphonic acid groups, namely the poly(N-n-propylacrylamide-stat-2-(methacryloyloxy)methylphosphonic acid) (P(NnPAAm-stat-hMAPC1)) were synthesized, and their sorption properties for three divalent cations (Ni(2+), Ca(2+), Cd(2+)) and one trivalent cation (Al(3+)) have been investigated. The sorption experiments were performed with increasing relative amount of cationic pollution compared to the amount of sorption sites (C(n+)/P ratio) in mono and multi-component solutions to investigate the sorption mechanisms. C(n+)/P proved to strongly affect the sorption capacity and high capacities were obtained for all cations at highest C(n+)/P ratios, reaching one mole of C(sorbed)(n+) per phosphonated moiety. For divalent cations, sorption mechanisms were likely to be described by electrostatic interactions only, whereas for aluminum trivalent cation the sorption not only resulted from electrostatic interactions but also from the formation of coordination binding. The selectivity of the phosphonic acid moieties for aluminum cations was demonstrated, highlighting the interest of P(NnPAAm-stat-(h)MAPC1) for their use for the treatment of metallic pollution from wastewater.
Asunto(s)
Aluminio/química , Carbono/química , Cationes Bivalentes/química , Ácidos Fosforosos/química , Contaminantes Químicos del Agua/análisis , Adsorción , Concentración de Iones de Hidrógeno , Cinética , Fosfatos/química , Polímeros/química , Soluciones , Electricidad Estática , Factores de Tiempo , Contaminantes del Agua/análisis , Contaminantes del Agua/química , Purificación del Agua/métodosRESUMEN
In order to remove metal ions from wastewaters, thermosensitive copolymers bearing sorption properties toward metal cations were prepared by free radical copolymerization between the N-n-propylacrylamide (NnPAAm) and the (dimethoxyphosphoryl)methyl 2-methylacrylate (MAPC1), followed by a hydrolysis of the phosphonated esters into phosphonic diacid groups ((h)MAPC1). The thermosensitivity and the sorption abilities of the resulting poly(NnPAAm-stat-(h)MAPC1) copolymers were studied. Lower Critical Solution Temperatures (LCST) of these copolymers ranged from 22 °C to 26 °C, depending on the molar ratio of phosphonated monomers and were lower than those obtained with usual poly(N-isopropylacrylamide)-based polymers. The influence of both the temperature and the pH on the sorption properties of the copolymers was evaluated for Ni(2+) cations. The most interesting results were obtained for temperatures around the LCST, i.e. when the proximity of the complexing groups favored the sorption of metallic cations. Concerning the pH effect, the maximum sorption capacity was obtained at pH 7, i.e. in the absence of competition between the sorption of H(+) and Ni(2+) ions on the phosphonic acid groups. The influence of the molar ratio of metal ions and phosphonate moieties was also studied and different sorption mechanisms were proposed.
Asunto(s)
Níquel/química , Ácidos Fosforosos/química , Contaminantes Químicos del Agua/química , Acrilatos/química , Adsorción , Polímeros/química , Soluciones , Temperatura , Eliminación de Residuos Líquidos/métodosRESUMEN
Polyoxazolines (POx) are increasingly being studied as polymeric building blocks due to the possibility of affording tunable properties. Additionally, as the biocompatibility and stealth behavior of POx are similar to that of poly(ethylene glycol) (PEG), it has become challenging to develop polyoxazoline-based (co)polymers. Even if POx have a lot of advantages, they also show an important drawback, as it has been impossible, to date, to prepare high-molecular-weight polyoxazolines with a low polydispersity index. Thus, it appears important that they be judiciously functionalized. This review covers the multiple ways that polyoxazolines can be functionalized. The use of functional initiators, functional terminating agents, and 2-R-2-oxazolines with an R functional side group is detailed. In conclusion, some perspectives on POx functionalizations are also reported, with functions permitting selective "click" reactions.
Asunto(s)
Oxazoles/química , Boranos/química , Química Clic , Reacción de Cicloadición , Polietilenglicoles/químicaRESUMEN
Well-defined graft copolymers were obtained using a copper-catalysed azide-alkyne Huisgen's cycloaddition click reaction from both biocompatible and non-toxic poly(ε-caprolactone) and poly(2-methyl-2-oxazoline) homopolymers. Resulting amphiphilic copolymers proved to form micelles that could be used as potential drug carriers.
Asunto(s)
Portadores de Fármacos/química , Poliaminas/química , Poliésteres/química , Polímeros/síntesis química , Triazoles/química , Alquinos/química , Azidas/química , Catálisis , Química Clic , Cobre/química , Micelas , Polímeros/químicaRESUMEN
This Review is focused on the growing interest brought to phosphorus-containing organic materials for applications in the biomedical field, mainly because of their properties such as biocompatibility, hemocompatibility, and protein adsorption resistance. It mainly describes relevant works achieved on these materials for various applications: dentistry, regenerative medicine, and drug delivery. Special attention was given to 2-methacryloyloxyethyl phosphorylcholine (MPC) monomer as the latter appeared of great importance because of its biomimetic structure due to the presence of the phospholipid group on its structure. As a result, much research effort is currently concentrated on the development of phosphorylcholine-containing (co)polymers that represent a promising class of materials.
Asunto(s)
Materiales Biocompatibles/síntesis química , Odontología/métodos , Sistemas de Liberación de Medicamentos/métodos , Metacrilatos/síntesis química , Fósforo/química , Fosforilcolina/análogos & derivados , Medicina Regenerativa/métodos , Ingeniería de Tejidos/métodos , Materiales Biocompatibles/metabolismo , Humanos , Hidrogeles/química , Hidrogeles/metabolismo , Metacrilatos/metabolismo , Fosfatos/química , Fosfatos/metabolismo , Fosfolípidos/química , Fosfolípidos/metabolismo , Fósforo/metabolismo , Fosforilcolina/síntesis química , Fosforilcolina/metabolismo , Polímeros/química , Proteínas/química , Proteínas/metabolismo , Propiedades de SuperficieRESUMEN
This contribution deals with the self-assembling of a terpolymer on titanium oxide (TiO(2)) surface. The polymer structure was obtained by polymerization of different methacrylates, i.e., alkyl-phosphonated, butyl and PEG methacrylate, in the presence of a chain transfer agent. The resulting PEG-poly(alkyl phosphonate) material, characterized mainly by SEC and NMR, self-organized at the interface of TiO(2). AR-XPS demonstrated the binding of phosphonate groups to TiO(2) substrate and the formation of a PEG-brush layer at the outermost part of the system. The stability of this terpolymer adlayer, after exposure to solutions of pH 2, 7.4, and 9 up to 3 weeks, was evaluated quantitatively by XPS and ellipsometry. We demonstrated an overall stability improvements of this coating against desorption in contact with aqueous solutions in comparison with reference self-assembly systems. Finally, the PEG-terpolymer adlayer proved to impart to TiO(2) substrate antifouling properties when exposed to full blood serum.
Asunto(s)
Organofosfonatos/química , Polietilenglicoles/química , Titanio/química , Adsorción , Tampones (Química) , Oscuridad , Humanos , Concentración de Iones de Hidrógeno , Peso Molecular , Oxidación-Reducción , Procesos Fotoquímicos , Espectroscopía de Fotoelectrones , Polietilenglicoles/síntesis química , Proteínas/química , Propiedades de Superficie , Factores de TiempoRESUMEN
The ability to control finely the structure of materials remains a central issue in colloidal science. Due to their elastic properties, liquid crystals (LC) are increasingly used to organize matter at the micrometer scale in soft composites. Textures and shapes of LC droplets are currently controlled by the competition between elasticity and anchoring, hydrodynamic flows, or external fields. Molecules adsorbed specifically at LC interfaces are known to orient LC molecules (anchoring effect), but other induced effects have been poorly explored. Using specifically designed amphitropic surfactants, we demonstrate that large-shape transformations can be achieved in direct LC/water emulsions. In particular, we focus on unusual nematic filaments formed from spherical droplets. These results suggest new approaches to design new soft LC composite materials through the adsorption of molecules at liquid crystal interfaces.
RESUMEN
A combination of A-B and B-C block copolymers was used to encapsulate DNA inside pEG coated particles, where A is a cationic block (poly(dimethylaminoethyl methacrylate), pDMAEMA) for DNA binding and condensation, B is a hydrophobic block (poly(butylmethacrylate), pBMA) and C is a polyethylene glycol (pEG) block. The AB and BC block copolymers were synthesized by transition metal mediated radical polymerization. The AB block copolymer had a fixed pBMA molecular weight of 3800 g/mol and a varying pDMAEMA molecular weight (from 22 to 65 kg/mol), the BC block copolymer had a fixed composition (pBMA 9000 g/mol; pEG 2000 g/mol). Plasmid DNA containing particles were made via a detergent dialysis method. By this method, particles of approximately 120 nm, as determined by dynamic light scattering (DLS), with a near neutral charge were formed, independent of the DMAEMA block size. DLS measurements and gel electrophoresis indicated that the particles were very stable in cell culture medium at 37 degrees C and resistant to anionic exchange by poly-l-aspartic acid. The particles were able to transfect COS-7 and OVCAR-3 cells with minor toxicity if incubated for 1 or 4 h; incubation for 24 h resulted in an increased toxicity. This paper shows that small polyplexes with near neutral charge can be obtained via a convenient detergent dialysis method using pDMAEMA-b-pBMA and pBMA-b-pEG. These particles may be interesting for in vivo experiments where particles with high positive charges have adverse interactions with blood components.