Polymeric Nanoparticles as Oral and Intranasal Peptide Vaccine Delivery Systems: The Role of Shape and Conjugation.

Mucosal vaccines are highly attractive due to high patient compliance and their suitability for mass immunizations. However, all currently licensed mucosal vaccines are composed of attenuated/inactive whole microbes, which are associated with a variety of safety concerns. In contrast, modern subunit vaccines use minimal pathogenic components (antigens) that are safe but typically poorly immunogenic when delivered via mucosal administration. In this study, we demonstrated the utility of various functional polymer-based nanostructures as vaccine carriers. A Group A Streptococcus (GAS)-derived peptide antigen (PJ8) was selected in light of the recent global spread of invasive GAS infection. The vaccine candidates were prepared by either conjugation or physical mixing of PJ8 with rod-, sphere-, worm-, and tadpole-shaped polymeric nanoparticles. The roles of nanoparticle shape and antigen conjugation in vaccine immunogenicity were demonstrated through the comparison of three distinct immunization pathways (subcutaneous, intranasal, and oral). No additional adjuvant or carrier was required to induce bactericidal immune responses even upon oral vaccine administration.

A Sequence-Defined ABC Dendritic Macromolecule with Amino Acid Peripheral Functionality via Iterative Chemoselective Reactions.

Chemoselective reactions allow near-precision control over the polymer composition and topology to create sequence-controlled polymers with similar secondary and tertiary structures to those found in proteins. Dendrimers are recognized as well-defined macromolecules with the potential to mimic protein surface functionality due to the large number of functional groups available at its periphery with the internal structure acting as the support scaffold. Transitioning from using small-molecule dendrimers to dendritic macromolecules will not only allow retention of the high peripheral functionality but also provide an internal scaffold with a desired polymer composition within each generational layer. Here, we exemplify a systematic approach to creating a dendritic macromolecule with the placement of different polymer building blocks in precise locations within the internal structure and the placement of three different amino acid moieties clustered at the periphery. The synthesis of this ABC dendritic macromolecule was accomplished through iterative chemoselective reactions.

Multiepitope Subunit Peptide-Based Nanovaccine against Porcine Circovirus Type 2 (PCV2) Elicited High Antibody Titers in Vaccinated Mice.

Porcine circovirus 2 (PCV2) infection is one of the most serious threats to the swine industry. While the disease can be prevented, to some extent, by commercial PCV2a vaccines, the evolving nature of PCV2 necessitates the development of a novel vaccine that can compete with the mutations of the virus. Thus, we have developed novel multiepitope vaccines based on the PCV2b variant. Three PCV2b capsid protein epitopes, together with a universal T helper epitope, were synthesized and formulated with five delivery systems/adjuvants: complete Freund's adjuvant, poly(methyl acrylate) (PMA), poly(hydrophobic amino acid), liposomes and rod-shaped polymeric nanoparticles built from polystyrene-poly(N-isopropylacrylamide)-poly(N-dimethylacrylamide). Mice were subcutaneously immunized with the vaccine candidates three times at three-week intervals. All vaccinated mice produced high antibody titters after three immunizations as analyzed by the enzyme-linked immunosorbent assay (ELISA), while mice vaccinated with PMA-adjuvanted vaccine elicited high antibody titers even after a single immunization. Thus, the multiepitope PCV2 vaccine candidates designed and examined here show strong potential for further development.

Liposomal Formulations of a Polyleucine-Antigen Conjugate as Therapeutic Vaccines against Cervical Cancer.

Human papilloma virus (HPV) is responsible for all cases of cervical cancer. While prophylactic vaccines are available, the development of peptide-based vaccines as a therapeutic strategy is still under investigation. In comparison with the traditional and currently used treatment strategies of chemotherapy and surgery, vaccination against HPV is a promising therapeutic option with fewer side effects. A peptide derived from the HPV-16 E7 protein, called 8Qm, in combination with adjuvants showed promise as a therapeutic vaccine. Here, the ability of polymerized natural amino acids to act as a self-adjuvating delivery system as a therapeutic vaccine was investigated for the first time. Thus, 8Qm was conjugated to polyleucine by standard solid-phase peptide synthesis and self-assembled into nanoparticles or incorporated in liposomes. The liposome bearing the 8Qm conjugate significantly increased mice survival and decreased tumor growth after a single immunization. Further, these liposomes eradicated seven-day-old well-established tumors in mice. Dendritic cell (DC)-targeting moieties were introduced to further enhance vaccine efficacy, and the newly designed liposomal vaccine was tested in mice bearing 11-day-old tumors. Interestingly, these DCs-targeting moieties did not significantly improve vaccine efficacy, whereas the simple liposomal formulation of 8Qm-polyleucine conjugate was still effective in tumor eradication. In summary, a peptide-based anticancer vaccine was developed that stimulated strong cellular immune responses without the help of a classical adjuvant.

Surface Inactivation of Highly Mutated SARS-CoV-2 Variants of Concern: Alpha, Delta, and Omicron.

Continued SARS-CoV-2 transmission among the human population has meant the evolution of the virus to produce variants of increased infectiousness and virulence, coined variants of concern (VOCs). The last wave of pandemic infections was driven predominantly by the delta VOC, but because of continued transmission and adaptive mutations, the more highly transmissible omicron variant emerged and is now dominant. However, due to waning immunity and emergence of new variants, vaccines alone cannot control the pandemic. The application of an antiviral coating to high-touch surfaces and physical barriers such as masks are an effective means to inactivate the virus and their spread. Here, we demonstrate an environmentally friendly water-borne polymer coating that can completely inactivate SARS-CoV-2 independent of the infectious variant. The polymer was designed to target the highly glycosylated spike protein on the virion surface and inactivate the virion by disruption of the viral membrane through a nano-mechanical process. Our findings show that, even with low amounts of coating on the surface (1 g/m2), inactivation of alpha, delta, and omicron VOCs and degradation of their viral genome were complete. Furthermore, our data shows that the polymer induces little to no skin sensitization in mice and is non-toxic upon oral ingestion in rats. We anticipate that our transparent polymer coating can be applied to face masks and many other surfaces to capture and inactivate the virus, aiding in the reduction of SARS-CoV-2 transmission and evolution of new variants of concern.

Temperature-Directed Formation of Anisotropic Kettlebell and Tadpole Nanostructures in the Absence of a Swelling-Induced Solvent.

Anisotropic Janus ("snowman") nanoparticles with a single protrusion are currently made via the solvent swelling-induced method. Here, we demonstrate without the aid of toxic solvents a generally applicable method for the formation of anisotropic polymer nanoparticles directly in water by controlling polymer mobility through tuning its glass transition temperature (Tg ). Spherical structures, formed immediately after the emulsion polymerization, transformed into uniform tadpoles (with head diameter ≈60 nm and tail length ≈130 nm) through the protrusion of a single cylindrical tail when cooled to a temperature above the Tg of the polymer. Cooling the spheres to below the Tg produced kinetically trapped kettlebell structures that could be freeze-dried and rehydrated without any structural change. These unique kettlebells could transform into uniform tadpoles by heating above the Tg , representing a triggered and on-demand structural reorganization.

Nonionic Polymer with Flat Upper Critical Solution Temperature Behavior in Water.

We rationally designed a monomer that when polymerized formed a well-defined nonionic polymer [poly(2-(methacryloyloxy) ethylureido glycinamide), PMEGA] by reversible addition fragmentation chain transfer with a flat and tunable upper critical solution temperature (UCST) in water. The monomer was made in one pot from commercially available compounds and with ease of purification. Strong hydrogen-bonding side groups on the polymer produced sharp coil-to-globule transitions upon cooling below its UCST. Ideal random copolymers produced with butyl methacrylate also showed flat UCST profiles, in which the UCST increased with a greater butyl methacrylate copolymer composition from 7 to 65 °C. In the presence of NaCl, the UCST decreased linearly with NaCl concentration due to the "salting-in" effect, and it was found that the slopes from the linear decrease of UCST were nearly identical for all copolymer compositions. This new polymer and its copolymers support the hypothesis that strong hydrogen bonding between the side groups allowed the flat UCST to be readily tuned with a high level of predictability. We postulate that this polymer system may provide wide biological applicability similar to that found for the well-used flat lower critical solution temperature (LCST) of poly(N-isopropylacrylamide).

RGD-Coated Polymer Nanoworms for Enriching Cancer Stem Cells.

Cancer stem cells (CSCs) are primarily responsible for tumour drug resistance and metastasis; thus, targeting CSCs can be a promising approach to stop cancer recurrence. However, CSCs are small in numbers and readily differentiate into matured cancer cells, making the study of their biological features, including therapeutic targets, difficult. The use of three-dimensional (3D) culture systems to enrich CSCs has some limitations, including low sphere forming efficiency, enzymatic digestion that may damage surface proteins, and more importantly no means to sustain the stem properties. A responsive 3D polymer extracellular matrix (ECM) system coated with RGD was used to enrich CSCs, sustain stemness and avoid enzymatic dissociation. RGD was used as a targeting motif and a ligand to bind integrin receptors. We found that the system was able to increase sphere forming efficiency, promote the growth of spheric cells, and maintain stemness-associated properties compared to the current 3D culture. We showed that continuous culture for three generations of colon tumour spheroid led to the stem marker CD24 gradually increasing. Furthermore, the new system could enhance the cancer cell sphere forming ability for the difficult triple negative breast cancer cells, MBA-MD-231. The key stem gene expression for colon cancer also increased with the new system. Further studies indicated that the concentration of RGD, especially at high doses, could inhibit stemness. Taken together, our data demonstrate that our RGD-based ECM system can facilitate the enrichment of CSCs and now allow for the investigation of new therapeutic approaches for colorectal cancer or other cancers.

Water-Borne Nanocoating for Rapid Inactivation of SARS-CoV-2 and Other Viruses.

The rise in coronavirus variants has resulted in surges of the disease across the globe. The mutations in the spike protein on the surface of the virion membrane not only allow for greater transmission but also raise concerns about vaccine effectiveness. Preventing the spread of SARS-CoV-2, its variants, and other viruses from person to person via airborne or surface transmission requires effective inactivation of the virus. Here, we report a water-borne spray-on coating for the complete inactivation of viral particles and degradation of their RNA. Our nanoworms efficiently bind and, through subsequent large nanoscale conformational changes, rupture the viral membrane and subsequently bind and degrade its RNA. Our coating completely inactivated SARS-CoV-2 (VIC01) and an evolved SARS-CoV-2 variant of concern (B.1.1.7 (alpha)), influenza A, and a surrogate capsid pseudovirus expressing the influenza A virus attachment glycoprotein, hemagglutinin. The polygalactose functionality on the nanoworms targets the conserved S2 subunit on the SARS-CoV-2 virion surface spike glycoprotein for stronger binding, and the additional attachment of guanidine groups catalyze the degradation of its RNA genome. Coating surgical masks with our nanoworms resulted in complete inactivation of VIC01 and B.1.1.7, providing a powerful control measure for SARS-CoV-2 and its variants. Inactivation was further observed for the influenza A and an AAV-HA capsid pseudovirus, providing broad viral inactivation when using the nanoworm system. The technology described here represents an environmentally friendly coating with a proposed nanomechanical mechanism for inactivation of both enveloped and capsid viruses. The functional nanoworms can be easily modified to target viruses in future pandemics, and is compatible with large scale manufacturing processes.

Mechanisms of cancer stem cell senescence: Current understanding and future perspectives.

Cancer stem cells (CSCs) are a small population of heterogeneous tumor cells with the capacity of self-renewal and aberrant differentiation for immortality and divergent lineages of cancer cells. In contrast to bulky tumor cells, CSCs remain less differentiated and resistant to therapy even when targeted with tissue-specific antigenic markers. This makes CSCs responsible for not only tumor initiation, development, but also tumor recurrence. Emerging evidence suggests that CSCs can undergo cell senescence, a non-proliferative state of cells in response to stress. While cell senescence attenuates tumor cell proliferation, it is commonly regarded as a tumor suppressive mechanism. However, mounting research indicates that CSC senescence also provides these cells with the capacity to evade cytotoxic effects from cancer therapy, exacerbating cancer relapse and metastasis. Recent studies demonstrate that senescence drives reprogramming of cancer cell toward stemness and promotes CSC generation. In this review, we highlight the origin, heterogeneity and senescence regulatory mechanisms of CSCs, the complex relationship between CSC senescence and tumor therapy, and the recent beneficial effects of senotherapy on eliminating senescent tumor cells.

Calcium-bisphosphonate Nanoparticle Platform as a Prolonged Nanodrug and Bone-Targeted Delivery System for Bone Diseases and Cancers.

Bone and bone-related diseases are the major cause of mobility hindrance and mortality in humans and there is no effective and safe treatment for most of them, especially, for bone and bone metastatic cancers. Bisphosphonates (BPs) are a group of small-molecule drugs for treating osteoporosis and bone cancers but have a very short half-life in circulation, requiring high doses and long-term repeat use that can cause severe side effects. Previous attempts of using nanoparticles to deliver BPs have issues of drug loading capacity and endosome escape/drug release. The present study reports the direct synthesis of BP nanoparticles by precipitating bone-favorable calcium ions and a third-generation BP, risedronate (Ca-RISNPs), to achieve high drug loading, endosomal release, and strong bone-targeting properties. The Ca-RISNPs are monodispersed with high stability at physiological pH but readily dissociate at endosomal pH conditions. They demonstrate strong penetration ability and uniform distribution in human bone and cartilage tissues and the superior drug and DNA (plasmid and oligo double strand DNA) delivery capacity in bone cells. These NPs also exhibit high specificity in killing tumor-associated macrophages (TAMs) and inhibit TAM-induced tumor cell migration. Collectively, our data indicate that this BP nanodrug platform has a great potential in managing bone-related diseases and cancers as a prolonged BP nanodrug and simultaneously as the bone-targeted drug delivery system.

Polymer Colloids: Synthesis Fundamentals to Applications.

This special issue of Biomacromolecules highlights research from The International Polymer Colloid Group (IPCG), which was founded in 1972 as a forum for the exchange of ideas and emerging research activities for scientists and engineers from both academia and industry who study or use polymer colloids. The increasing relevance of polymeric structures with colloidal dimensions to biomacromolecules research provided the impetus for organizing this special issue. The IPCG is composed of over 120 researchers from over 20 countries who are elected to membership. Activities comprise annual symposia including a biennial International Polymer Colloid Group Research Conference and a semiannual newsletter that incorporates a summary of recent (including unpublished) research results from our members.

Monodisperse Macromolecules by Self-Interrupted Living Polymerization.

Biological macromolecules such as proteins and nucleic acids are monodisperse just as low-molar-mass organic compounds are. However, synthetic macromolecules contain mixtures of different chain lengths, the most uniform being generated by living polymerizations, which exhibit a maximum of 1-3% of chains with the desired length. Monodisperse natural and synthetic oligomers can be obtained in low quantities by tedious, multistep iterative methods. Here we report a methodology to synthesize monodisperse synthetic macromolecules by self-interrupted living polymerization. This methodology relies on a concept that combines supramolecular and macromolecular chemistry and differs from the conventional reactivity principles employed in the synthesis of polymers for over 100 years.

Therapeutic Delivery of Polymeric Tadpole Nanostructures with High Selectivity to Triple Negative Breast Cancer Cells.

Targeted delivery of therapeutic drugs using nanoparticles to the highly aggressive triple negative breast cancer cells has the potential to reduce side effects and drug resistance. Cell entry into triple negative cells can be enhanced by incorporating cell binding receptor molecules on the surface of the nanoparticles to enhance receptor-mediated entry pathways, including clatherin or caveolae endocytosis. However, for highly aggressive cancer cells, these pathways may not be effective, with the more rapid and high volume uptake from macropinocytosis or phagocytosis being significantly more advantageous. Here we show, in the absence of attached cell binding receptor molecules, that asymmetric polymer tadpole nanostructure coated with a thermoresponsive poly(N-isopropylacrylamide) polymer with approximately 50% of this polymer in a globular conformation resulted in both high selectivity and rapid uptake into the triple breast cancer cell line MDA-MB-231. We found that the poly(N-isopropylacrylamide) surface coating in combination with the tadpole's unique shape had an almost 15-fold increase in cell uptake compared to spherical particles with the same polymer coating, and that the mode of entry was most likely through phagocytosis. Delivery of the tadpole attached with doxorubicin (a prodrug, which can be released at pHs < 6) showed a remarkable 10-fold decrease in the IC50 compared to free doxorubicin. It was further observed that cell death was primarily through late apoptosis, which may allow further protection from the body's own immune system. Our results demonstrate that by tuning the chemical composition, polymer conformation and using an asymmetric-shaped nanoparticle, both selectivity and effective delivery and release of therapeutics can be achieved, and such insights will allow the design of nanoparticles for optimal cancer outcomes.

Temperature-Induced Formation of Uniform Polymer Nanocubes Directly in Water.

Conventional self-assembly methods of block copolymers in cosolvents (i.e., usually water and organic solvents) has yet to produce a pure and monodisperse population of nanocubes. The requirement to assemble a nanocube is for the second block to have a high molecular weight. However, such high molecular weight block copolymers usually result in the formation of kinetically trapped nanostructures even with the addition of organic cosolvents. Here, we demonstrate the rapid production of well-defined polymer nanocubes directly in water by utilizing the thermoresponsive nature of the second block (with 263 monomer units), in which the block copolymer was fully water-soluble below its lower critical solution temperature (LCST) and would produce a pure population of nanocubes when heated above this temperature. Incorporating a pH-responsive monomer in the second block allowed us to control the size of the nanocubes in water with pH and the LCST of the block copolymer. We then used the temperature and pH responsiveness to create an adaptive system that changes morphology when using a unique fuel. This fuel (H2O2 + MnO2) is highly exothermic, and the solution pH increases with the consumption of H2O2. Initially, a nonequilibrium spherical nanostructure formed, which transformed over time into nanocubes, and by controlling the exotherm of the reaction, we controlled the time for this transformation. This block copolymer and the water-only method of self-assembly have provided some insights into designing biomimetic systems that can readily adapt to the environmental conditions.

Cancer stemness contributes to cluster formation of colon cancer cells and high metastatic potentials.

The ability of cancer cells to form clusters is a characteristic feature in the development of metastatic tumours with drug resistance. Several studies demonstrated that clusters of circulating tumour cells (CTCs) have a greater metastatic potential to establish new tumours at secondary sites than single CTCs. However, the mechanism of cluster formation is not well understood. In this study, we investigated whether cancer stemness would contribute to cluster formation. We used a tumour sphere culture method to enrich cancer stem cells (CSCs) from colon cancer cells and found that during the second generation of sphere culture, clusters (between 3 and 5 cells) formed within the first 24 hours, whereas the rest remained as single cells. The clusters were analysed for stemness and metastatic potential, including gene expressions for cancer stemness (CD133 and Lgr5), epithelial-mesenchymal transition (E-cadherin and TGF-ß 1-3) and hypoxia-induced factors (HIF-1α and HIF-2α). The results showed that the clusters expressed higher levels of these genes and colon CSC surface markers (including CD24, CD44 and CD133) than the single cells. Among these markers, CD24 seemed the major contributor linking the cells into the clusters. These clusters also showed a stronger ability to both form colonies and migrate. Our data collectively suggest that colon cancer stemness contributes to cluster formation and that clustered cells exhibit a great metastatic potential. Our study thus provides a method to study the CTC clusters and derive insight into oncogenesis and metastasis.

UV-Cross-Linked Polymer Nanostructures with Preserved Asymmetry and Surface Functionality.

Polymer nanostructures can be designed with tailored properties and functions by varying their shape, chemical compositions, and surface functionality. The poor stability of these soft materials in solvent other than water can be overcome by introducing cross-links. However, cross-linking complex morphologies remains a challenge. Here, by using the temperature-directed morphology transformation method, we show that the symmetric (nanoworm) and asymmetric (tadpole) nanostructure cores can be UV-cross-linked through the coupling of styrene and para-chlorostyrene units found in the core by irradiating at 254 nm for up to 5 h. Once cross-linked, these nanostructures maintain their structure in organic solvent, further allowing us to couple on a water-insoluble pro-fluorescent probe with high efficiency.

Replacing Cu(II)Br2 with Me6-TREN in Biphasic Cu(0)/TREN Catalyzed SET-LRP Reveals the Mixed-Ligand Effect.

The mixed-ligand system consisting of tris(2-aminoethyl)amine (TREN) and tris(2-dimethylaminoethyl)amine (Me6-TREN) during the Cu(0) wire-catalyzed single electron transfer-living radical polymerization (SET-LRP) of methyl acrylate (MA) in "programmed" biphasic mixtures of the dipolar aprotic solvents NMP, DMF, and DMAc with H2O is reported. Kinetic and chain end analysis studies by NMR and MALDI-TOF before and after thio-bromo "click" reaction demonstrated that Me6-TREN complements and makes the less expensive TREN a very efficient ligand in the absence of externally added Cu(II)Br2. Statistical analysis of the kinetic data together with control experiments demonstrated that this mixed-ligand effect enhanced the apparent rate constant of propagation, monomer conversion, and molecular weight control. The most efficient effect was observed at a 1/1 molar ratio between these two ligands, suggesting that in addition to a fast exchange between the two ligands, a new single dynamic ligand generated by hydrogen bonding may be responsible for the mixed ligand observed.

Conjugated Nitroxide Radical Polymers: Synthesis and Application in Flexible Energy Storage Devices.

The synthesis and electrochemical behavior of nitroxide radical conjugated polymers (NCPs) have long been an intriguing topic in redox polymer-based energy storage. However, common (electro)chemical oxidation polymerization methods have proved difficult in the synthesis of well-defined NCPs, and many of these polymers have been difficult to process into thin films. In addition to these drawbacks and coupled with the complex charge-transfer and storage mechanisms, the use of NCPs as electrodes has been significantly limited. The aim of this work is to provide mechanistic insights into this complex charge-transfer and storage process using a new and well-defined NCP synthesized using an ultrafast cyclopolymerization with the Grubbs 3rd generation catalyst. The monomer, consisting of a 1,6-heptadiyne group and a TEMPO (i.e. 2,2,6,6-tetramethylpiperidine-1-oxy) radical, through the cyclopolymerization produced a well-defined NCP with a five-membered ring-containing polyene backbone. This polymer demonstrated excellent film formation properties, allowing the study of their thin-film electrochemical behavior. We found that the electrochemical oxidation of the conjugated backbone and its internal charge transfer to the nitroxide radicals were strongly affected by the applied potential window, current densities, and cycle numbers. Using these new insights, we successfully utilized our NCPs in a flexible energy storage device by fabricating high-performance NCP-coated carbon cloth-based flexible electrodes.

Biodistribution of PNIPAM-Coated Nanostructures Synthesized by the TDMT Method.

Targeting the spleen with nanoparticles could increase the efficacy of vaccines and cancer immunotherapy, and have the potential to treat intracellular infections including leishmaniasis, trypanosome, splenic TB, AIDS, malaria, and hematological disorders. Although, nanoparticle capture in both the liver and spleen has been well documented, there are only a few examples of specific capture in the spleen alone. It is proposed that the larger the nanoparticle size (>400 nm) the greater the specificity and capture within the spleen. Here, we synthesized five nanostructures with different shapes (ranging from spheres, worms, rods, nanorattles, and toroids) and poly( N-isopropylacrylamide), PNIPAM, surface coating using the temperature-directed morphology transformation (TDMT) method. Globular PNIPAM (i.e., water insoluble) surface coatings have been shown to significantly increase cell uptake and enhanced enzyme activity. We incorporated a globular component of PNIPAM on the nanostructure surface and examined the in vivo biodistribution of these nanostructures and accumulation in various tissues and organs in a mouse model. The in vivo biodistribution as a function of time was influenced by the shape and PNIPAM surface composition, in which organ capture and retention was the highest in the spleen. The rods (∼150 nm in length and 15 nm in width) showed the highest capture and retention of greater than 35% to the initial injection amount compared to all other nanostructures. It was found that the rods specifically targeted the cells in the red pulp region of the spleen due to the shape and PNIPAM coating of the rod. This remarkable accumulation and selectively into the spleen represents new nanoparticle design parameters to develop new splenotropic effects for vaccines and other therapeutics.