RESUMEN
Benzene-1,3,5-tricarboxamide (BTA) glyco-monomers containing one, two or three mannose units are synthesized and formulated into differently patterned supramolecular glycopolymers through homo-assembly or co-assembly with non-functionalized BTAs. Unfortunately, no cellular activity could be detected. Excitingly, these glyco-BTA monomers could be formulated into hydrogels, paving the way for (immune) cell culture.
Asunto(s)
Hidrogeles , ManosaRESUMEN
Many synthetic polymers used to form polymer-brush films feature a main backbone with functional, oligomeric side chains. While the structure of such graft polymers mimics biomacromolecules to an extent, it lacks the monodispersity and structural purity present in nature. Here we demonstrate that side-chain heterogeneity within graft polymers significantly influences hydration and the occurrence of hydrophobic interactions in the subsequently formed brushes and consequently impacts fundamental interfacial properties. This is demonstrated for the case of poly(methacrylate)s (PMAs) presenting oligomeric side chains of different length (n) and dispersity. A precise tuning of brush structure was achieved by first synthesizing oligo(2-ethyl-2-oxazoline) methacrylates (OEOXMAs) by cationic ring-opening polymerization (CROP), subsequently purifying them into discrete macromonomers with distinct values of n by column chromatography, and finally obtaining poly[oligo(2-ethyl-2-oxazoline) methacrylate]s (POEOXMAs) by reversible addition-fragmentation chain-transfer (RAFT) polymerization. Assembly of POEOXMA on Au surfaces yielded graft polymer brushes with different side-chain dispersities and lengths, whose properties were thoroughly investigated by a combination of variable angle spectroscopic ellipsometry (VASE), quartz crystal microbalance with dissipation (QCMD), and atomic force microscopy (AFM) methods. Side-chain dispersity, or dispersity within brushes, leads to assemblies that are more hydrated, less adhesive, and more lubricious and biopassive compared to analogous films obtained from graft polymers characterized by a homogeneous structure.
RESUMEN
The use of supramolecular polymers to construct functional biomaterials is gaining more attention due to the tunable dynamic behavior and fibrous structures of supramolecular polymers, which resemble those found in natural systems, such as the extracellular matrix. Nevertheless, to obtain a biomaterial capable of mimicking native systems, complex biomolecules should be incorporated, as they allow one to achieve essential biological processes. In this study, supramolecular polymers based on water-soluble benzene-1,3,5-tricarboxamides (BTAs) were assembled in the presence of hyaluronic acid (HA) both in solution and hydrogel states. The coassembly of BTAs bearing tetra(ethylene glycol) at the periphery (BTA-OEG4) and HA at different ratios showed strong interactions between the two components that led to the formation of short fibers and heterogeneous hydrogels. BTAs were further covalently linked to HA (HA-BTA), resulting in a polymer that was unable to assemble into fibers or form hydrogels due to the high hydrophilicity of HA. However, coassembly of HA-BTA with BTA-OEG4 resulted in the formation of long fibers, similar to those formed by BTA-OEG4 alone, and hydrogels were produced with tunable stiffness ranging from 250 to 700 Pa, which is 10-fold higher than that of hydrogels assembled with only BTA-OEG4. Further coassembly of BTA-OEG4 fibers with other polysaccharides showed that except for dextran, all polysaccharides studied interacted with BTA-OEG4 fibers. The possibility of incorporating polysaccharides into BTA-based materials paves the way for the creation of dynamic complex biomaterials.
Asunto(s)
Ácido Hialurónico , Hidrogeles , Materiales Biocompatibles , Matriz Extracelular , PolímerosRESUMEN
The fast dynamics occurring in natural processes increases the difficulty of creating biomaterials capable of mimicking Nature. Within synthetic biomaterials, water-soluble supramolecular polymers show great potential in mimicking the dynamic behavior of these natural processes. In particular, benzene-1,3,5-tricaboxamide (BTA)-based supramolecular polymers have shown to be highly dynamic through the exchange of monomers within and between fibers, but their suitability as biomaterials has not been yet explored. Herein we systematically study the interactions of BTA supramolecular polymers bearing either tetraethylene glycol or mannose units at the periphery with different biological entities. When BTA fibers were incubated with bovine serum albumin (BSA), the protein conformation was only affected by the fibers containing tetraethylene glycol at the periphery (BTA-OEG4). Coarse-grained molecular simulations showed that BSA interacted with BTA-OEG4 fibers rather than with BTA-OEG4 monomers that are present in solution or that may exchange out of the fibers. Microscopy studies revealed that, in the presence of BSA, BTA-OEG4 retained their fiber conformation although their length was slightly shortened. When further incubated with fetal bovine serum (FBS), both long and short fibers were visualized in solution. Nevertheless, in the hydrogel state, the rheological properties were remarkably preserved. Further studies on the cellular compatibility of all the BTA assemblies and mixtures thereof were performed in four different cell lines. A low cytotoxic effect at most concentrations was observed, confirming the suitability of utilizing functional BTA supramolecular polymers as dynamic biomaterials.
Asunto(s)
Benceno , Materiales Biocompatibles , Benzamidas , PolímerosRESUMEN
Linear and cyclic poly(2-ethyl-2-oxazoline) (PEOXA) adsorbates provide excellent colloidal stability to superparamagnetic iron oxide nanoparticles (FexOy NPs) within protein-rich media. However, dense shells of linear PEOXA brushes cannot prevent weak but significant attractive interactions with human serum albumin. In contrast, their cyclic PEOXA counterparts quantitatively hinder protein adsorption, as demonstrated by a combination of dynamic light scattering and isothermal titration calorimetry. The cyclic PEOXA brushes generate NP shells that are denser and more compact than their linear counterparts, entirely preventing the formation of a protein corona as well as aggregation, even when the lower critical solution temperature of PEOXA in a physiological buffer is reached.
Asunto(s)
Nanopartículas , Corona de Proteínas , Adsorción , Calorimetría , Humanos , PolímerosRESUMEN
Understanding cell/material interactions is essential to design functional cell-responsive materials. While the scientific literature abounds with formulations of biomimetic materials, only a fraction of them focused on mechanisms of the molecular interactions between cells and material. To provide new knowledge on the strategies for materials/cell recognition and binding, supramolecular benzene-1,3,5-tricarboxamide copolymers bearing benzoxaborole moieties are anchored on the surface of human erythrocytes via benzoxaborole/sialic-acid binding. This interaction based on both dynamic covalent and non-covalent chemistries is visualized in real time by means of total internal reflection fluorescence microscopy. Exploiting this imaging method, we observe that the functional copolymers specifically interact with the cell surface. An optimal fiber affinity towards the cells as a function of benzoxaborole concentration demonstrates the crucial role of multivalency in these cell/material interactions.
Asunto(s)
Benzamidas/química , Materiales Biomiméticos/química , Ácidos Borónicos/química , Eritrocitos/química , Polímeros/química , Humanos , Sustancias Macromoleculares/química , Microscopía Fluorescente , Estructura Molecular , Tamaño de la Partícula , Propiedades de SuperficieRESUMEN
Polymer-topology effects can alter technologically relevant properties when cyclic macromolecules are applied within diverse materials formulations. These include coatings, polymer networks, or nanostructures for delivering therapeutics. While substituting linear building blocks with cyclic analogues in commonly studied materials is itself of fundamental interest, an even more fascinating observation has been that the introduction of physical or chemical boundaries (e.g., a grafting surface or cross-links) can amplify the topology-related effects observed when employing cyclic polymer-based precursors for assembling multidimensional objects. Hence, the application of cyclic polymers has enabled the fabrication of coatings with enhanced biorepellency and superior lubricity, broadened the tuning potential for mechanical properties of polymer networks, increased the thermodynamic stability, and altered the capability of loading and releasing drugs within polymeric micelles.
RESUMEN
Poly(2-alkyl-2-oxazoline)s (PAOXAs) have progressively emerged as suitable alternatives for replacing poly(ethylene glycol) (PEG) in a variety of biomaterial-related applications, especially in the designing of polymer brush-based biointerfaces because of their stealth properties and chemical robustness. When equimolar mixtures of PEG and PAOXAs are assembled on surfaces to yield mixed polymer brushes, the interfacial physicochemical properties of the obtained films are significantly altered, in some cases, surpassing the biopassive and lubricious characteristics displayed by single-component PAOXA and PEG counterparts. With a combination of variable angle spectroscopic ellipsometry, quartz crystal microbalance with dissipation, and atomic force microscopy-based methods, we demonstrate that mixing of PEG brushes with equimolar amounts of PAOXA grafts determines an increment in film's hydration and viscoelasticity. In the case of mixtures of PEG and poly(2-methyl-2-oxazoline) or poly(2-ethyl-2-oxazoline), brushes displaying full inertness toward serum proteins and improved lubricity with respect to the corresponding single-component layers can be generated, while providing a multifunctional surface that substantially enlarges the applicability of the designed coatings.
RESUMEN
Zinc sulfide (ZnS) nanoparticles (NPs) are particularly interesting materials for their electronic and luminescent properties. Unfortunately, their robust and stable functionalization and stabilization, especially in aqueous media, has represented a challenging and not yet completely accomplished task. In this work, we report the synthesis of colloidally stable, photoluminescent and biocompatible core-polymer shell ZnS and ZnS:Tb NPs by employing a water-in-oil miniemulsion (ME) process combined with surface functionalization via catechol-bearing poly-2-methyl-2-oxazoline (PMOXA) of various molar masses. The strong binding of catechol anchors to the metal cations of the ZnS surface, coupled with the high stability of PMOXA against chemical degradation, enable the formation of suspensions presenting excellent colloidal stability. This feature, combined with the assessed photoluminescence and biocompatibility, make these hybrid NPs suitable for optical bioimaging.
Asunto(s)
Materiales Biocompatibles/química , Catecoles/química , Sustancias Luminiscentes/química , Nanopartículas/química , Poliaminas/química , Sulfuros/química , Compuestos de Zinc/química , Células A549 , Materiales Biocompatibles/síntesis química , Materiales Biocompatibles/toxicidad , Catecoles/síntesis química , Catecoles/toxicidad , Supervivencia Celular/efectos de los fármacos , Humanos , Luminiscencia , Sustancias Luminiscentes/síntesis química , Sustancias Luminiscentes/toxicidad , Nanopartículas/toxicidad , Poliaminas/síntesis química , Poliaminas/toxicidad , Sulfuros/toxicidad , Terbio/química , Compuestos de Zinc/toxicidadRESUMEN
The era of poly(ethylene glycol) (PEG) brushes as a universal panacea for preventing non-specific protein adsorption and providing lubrication to surfaces is coming to an end. In the functionalization of medical devices and implants, in addition to preventing non-specific protein adsorption and cell adhesion, polymer-brush formulations are often required to generate highly lubricious films. Poly(2-alkyl-2-oxazoline) (PAOXA) brushes meet these requirements, and depending on their side-group composition, they can form films that match, and in some cases surpass, the bioinert and lubricious properties of PEG analogues. Poly(2-methyl-2-oxazine) (PMOZI) provides an additional enhancement of brush hydration and main-chain flexibility, leading to complete bioinertness and a further reduction in friction. These data redefine the combination of structural parameters necessary to design polymer-brush-based biointerfaces, identifying a novel, superior polymer formulation.
Asunto(s)
Materiales Biocompatibles/química , Oxazinas/química , Oxazoles/química , Polietilenglicoles/química , Adsorción , Alquilación , Adhesión Celular , Equipos y Suministros , Humanos , Lubricantes/química , Metilación , Propiedades de SuperficieRESUMEN
Lubrication within articular joints plays a crucial role in daily life, providing an extremely low coefficient of friction and preventing wear at the surface of the articular cartilage. Natural biomacromolecules responsible for lubrication are part of the synovial fluid and their degradation is associated with the onset of degenerative diseases, such as osteoarthritis (OA). The current absence of effective treatments for OA has captured the attention of chemists and material scientists over the last two decades, triggering the development of partially or fully synthetic biolubricants aimed to reduce friction within the joints and restore cartilage functions. Although there is still a long way to go before synthetic replacements of natural biolubricants can be applied clinically, this review highlights those formulations that meet the fundamental requirements for being efficient lubricants for articular cartilage.
Asunto(s)
Cartílago Articular , Lubrificación , Osteoartritis/terapia , Animales , Humanos , Ácido Hialurónico/química , Inmunoglobulina G , Líquido Sinovial/químicaRESUMEN
Poly(2-methyl-2-oxazoline) (PMOXA) is an alternative promising polymer to poly(ethylene glycol) (PEG) for design and engineering of macrophage-evading nanoparticles (NPs). Although PMOXA-engineered NPs have shown comparable pharmacokinetics and in vivo performance to PEGylated stealth NPs in the murine model, its interaction with elements of the human innate immune system has not been studied. From a translational angle, we studied the interaction of fully characterized PMOXA-coated vinyltriethoxysilane-derived organically modified silica NPs (PMOXA-coated NPs) of approximately 100 nm in diameter with human complement system, blood leukocytes, and macrophages and compared their performance with PEGylated and uncoated NP counterparts. Through detailed immunological and proteomic profiling, we show that PMOXA-coated NPs extensively trigger complement activation in human sera exclusively through the classical pathway. Complement activation is initiated by the sensing molecule C1q, where C1q binds with high affinity ( Kd = 11 ± 1 nM) to NP surfaces independent of immunoglobulin binding. C1q-mediated complement activation accelerates PMOXA opsonization with the third complement protein (C3) through the amplification loop of the alternative pathway. This promoted NP recognition by human blood leukocytes and monocyte-derived macrophages. The macrophage capture of PMOXA-coated NPs correlates with sera donor variability in complement activation and opsonization but not with other major corona proteins, including clusterin and a wide range of apolipoproteins. In contrast to these observations, PMOXA-coated NPs poorly activated the murine complement system and were marginally recognized by mouse macrophages. These studies provide important insights into compatibility of engineered NPs with elements of the human innate immune system for translational steps.
Asunto(s)
Activación de Complemento , Complemento C1q/inmunología , Complemento C3/inmunología , Nanopartículas/metabolismo , Opsinas/inmunología , Fagocitos/inmunología , Poliaminas/metabolismo , Dióxido de Silicio/inmunología , Animales , Complemento C1q/química , Complemento C3/química , Femenino , Humanos , Inmunidad Innata/inmunología , Masculino , Ratones , Ratones Endogámicos BALB C , Nanopartículas/química , Opsinas/química , Fagocitos/química , Poliaminas/química , Poliaminas/inmunología , Dióxido de Silicio/químicaRESUMEN
Comb-like polymers presenting a hydroxybenzaldehyde (HBA)-functionalized poly(glutamic acid) (PGA) backbone and poly(2-methyl-2-oxazoline) (PMOXA) side chains chemisorb on aminolized substrates, including cartilage surfaces, forming layers that reduce protein contamination and provide lubrication. The structure, physicochemical, biopassive, and tribological properties of PGA-PMOXA-HBA films are finely determined by the copolymer architecture, its reactivity toward the surface, i.e. PMOXA side-chain crowding and HBA density, and by the copolymer solution concentration during assembly. Highly reactive species with low PMOXA content form inhomogeneous layers due to the limited possibility of surface rearrangements by strongly anchored copolymers, just partially protecting the functionalized surface from protein contamination and providing a relatively weak lubrication on cartilage. Biopassivity and lubrication can be improved by increasing copolymer concentration during assembly, leading to a progressive saturation of surface defects across the films. In a different way, less reactive copolymers presenting high PMOXA side-chain densities form uniform, biopassive, and lubricious films, both on model aminolized silicon oxide surfaces, as well as on cartilage substrates. When assembled at low concentrations these copolymers adopt a "lying down" conformation, i.e. adhering via their backbones onto the substrates, while at high concentrations they undergo a conformational transition, assuming a more densely packed, "standing up" structure, where they stretch perpendicularly from the substrate. This specific arrangement reduces protein contamination and improves lubrication both on model as well as on cartilage surfaces.
Asunto(s)
Cartílago/química , Lubricantes/química , Modelos Químicos , Oxazoles/química , Ácido Poliglutámico/química , Polímeros/química , Animales , Bovinos , Química ClicRESUMEN
Functional block copolymers based on poly(2-oxazoline)s are versatile building blocks for the fabrication of dual-drug delivery nanoparticles (NPs) for anticancer chemotherapy. Core-shell NPs are fabricated from diblock copolymers featuring a long and hydrophilic poly(2-methyl-2-oxazoline) (PMOXA) block coupled to a relatively short and functionalizable poly(2-methylsuccinate-2-oxazoline) (PMestOXA) segment. The PMOXA block stabilizes the NP dispersions, whereas the PMestOXA segment is used to conjugate pterostilbene, a natural bioactive phenolic compound that is used as lipophilic model-drug and constitutes the hydrophobic core of the designed NPs. Subsequent loading of the NPs with clofazimine (CFZ), an inhibitor of the multidrug resistance pumps typically expressed in a large variety of cancer cells, provides an additional function to their formulation. Optimization of the copolymer composition allows the design of polymer scaffolds showing low toxicity and capable of assembling into highly stable NPs dispersions at physiologically relevant pH. In addition, the incorporation of CFZ increases the stability of the NPs and stimulates their internalization by RAW 264.7 cells.
Asunto(s)
Antineoplásicos/administración & dosificación , Antineoplásicos/química , Sistemas de Liberación de Medicamentos , Nanopartículas/química , Oxazoles/química , Estilbenos/química , Animales , Antineoplásicos/farmacología , Espectroscopía de Resonancia Magnética con Carbono-13 , Clofazimina/administración & dosificación , Clofazimina/farmacología , Resistencia a Múltiples Medicamentos/efectos de los fármacos , Interacciones Hidrofóbicas e Hidrofílicas , Ratones , Nanopartículas/administración & dosificación , Espectroscopía de Protones por Resonancia Magnética , Células RAW 264.7 , Espectrofotometría UltravioletaRESUMEN
While topology effects by cyclic polymers in solution and melts are well-known, their translation into the interfacial properties of polymer "brushes" provides new opportunities to impart enhanced surface lubricity and biopassivity to inorganic surfaces, above and beyond that expected for linear analogues of identical composition. The impact of polymer topology on the nanotribological and protein-resistance properties of polymer brushes is revealed by studying linear and cyclic poly(2-ethyl-2-oxazoline) (PEOXA) grafts presenting a broad range of surface densities and while shearing them alternatively against an identical brush or a bare inorganic surface. The intramolecular constraints introduced by the cyclization provide a valuable increment in both steric stabilization and load-bearing capacity for cyclic brushes. Moreover, the intrinsic absence of chain ends within cyclic adsorbates hinders interpenetration between opposing brushes, as they are slid over each other, leading to a reduction in the friction coefficient (µ) at higher pressures, a phenomenon not observed for linear grafts. The application of cyclic polymers for the modification of inorganic surfaces generates films that outperform both the nanotribological and biopassive properties of linear brushes, significantly expanding the design possibilities for synthetic biointerfaces.
RESUMEN
Tissue-reactive graft copolymers were designed to protect the cartilage against enzymatic degradation and restore its lubrication properties during the early stages of osteoarthritis (OA). The copolymers feature a poly(glutamic acid) (PGA) backbone bearing hydroxybenzaldehyde (HBA) functions and cyclic poly(2-methyl-2-oxazoline) (PMOXA) side chains. PGA-PMOXA-HBA species chemisorb on the degraded tissue via Schiff bases and expose the biopassive and lubricious PMOXA cyclic grafts at the interface. The smaller hydrodynamic radius by cyclic PMOXA side chains coupled to the intrinsic absence of chain ends generate denser and more lubricious films on cartilage when compared to those produced by copolymers bearing linear PMOXA. Topology effects demonstrate how the introduction of cyclic polymers within tissue-reactive copolymers substantially improve their tribological and biopassive properties, suggesting a plethora of possible applications for cyclic macromolecules in biomaterials formulations.
Asunto(s)
Lubricantes/química , Polímeros/química , Sustancias Protectoras/química , Adsorción , Animales , Cartílago Articular/efectos de los fármacos , Cartílago Articular/metabolismo , Cartílago Articular/patología , Bovinos , Colagenasas/metabolismo , Humanos , Lubricantes/síntesis química , Lubricantes/farmacología , Osteoartritis/metabolismo , Osteoartritis/patología , Ácido Poliglutámico/química , Polímeros/metabolismo , Polímeros/farmacología , Sustancias Protectoras/metabolismo , Sustancias Protectoras/farmacología , Tecnicas de Microbalanza del Cristal de Cuarzo , Albúmina Sérica/química , Albúmina Sérica/metabolismo , Propiedades de SuperficieRESUMEN
Arranging cultured cells in patterns via surface modification is a tool used by biologists to answer questions in a specific and controlled manner. In the past decade, bottom-up neuroscience emerged as a new application, which aims to get a better understanding of the brain via reverse engineering and analyzing elementary circuitry in vitro. Building well-defined neural networks is the ultimate goal. Antifouling coatings are often used to control neurite outgrowth. Because erroneous connectivity alters the entire topology and functionality of minicircuits, the requirements are demanding. Current state-of-the-art coating solutions such as widely used poly(l-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) fail to prevent primary neurons from making undesired connections in long-term cultures. In this study, a new copolymer with greatly enhanced antifouling properties is developed, characterized, and evaluated for its reliability, stability, and versatility. To this end, the following components are grafted to a poly(acrylamide) (PAcrAm) backbone: hexaneamine, to support spontaneous electrostatic adsorption in buffered aqueous solutions, and propyldimethylethoxysilane, to increase the durability via covalent bonding to hydroxylated culture surfaces and antifouling polymer poly(2-methyl-2-oxazoline) (PMOXA). In an assay for neural connectivity control, the new copolymer's ability to effectively prevent unwanted neurite outgrowth is compared to the gold standard, PLL-g-PEG. Additionally, its versatility is evaluated on polystyrene, glass, and poly(dimethylsiloxane) using primary hippocampal and cortical rat neurons as well as C2C12 myoblasts, and human fibroblasts. PAcrAm-g-(PMOXA, NH2, Si) consistently outperforms PLL-g-PEG with all tested culture surfaces and cell types, and it is the first surface coating which reliably prevents arranged nodes of primary neurons from forming undesired connections over the long term. Whereas the presented work focuses on the proof of concept for the new antifouling coating to successfully and sustainably prevent unwanted connectivity, it is an important milestone for in vitro neuroscience, enabling follow-up studies to engineer neurologically relevant networks. Furthermore, because PAcrAm-g-(PMOXA, NH2, Si) can be quickly applied and used with various surfaces and cell types, it is an attractive extension to the toolbox for in vitro biology and biomedical engineering.
Asunto(s)
Oxazoles/química , Adsorción , Animales , Células Cultivadas , Humanos , Polietilenglicoles , Polilisina , Polímeros , Ratas , Reproducibilidad de los Resultados , Propiedades de SuperficieRESUMEN
Grafting synthetic polymers to inorganic and organic surfaces to yield polymer "brushes" has represented a revolution in many fields of materials science. Polymer brushes provide colloidal stabilization to nanoparticles (NPs), prevent and/or regulate the adsorption of proteins on biomaterials, and significantly reduce friction when applied to two surfaces sheared against each other. Can the performance of polymer brushes as steric stabilizers and boundary lubricants be improved? The answer to this question encompasses the application of polymer grafts presenting different chain topologies, beyond linearity. In particular, grafted polymers forming loops and cycles at the surface have been recently demonstrated to enable the modulation of interfacial physicochemical properties, including nanomechanical and nanotribological, to an extent that is difficultly addressed by using their linear counterparts. Loop and cyclic polymer brushes provide enhanced steric stabilization to surfaces, increase their biopassivity and show superlubricious behavior. Their distinctive structure, the methods applied to fabricate them and their application in several technologically relevant fields of materials science are reviewed in this contribution.
RESUMEN
Cyclic poly-2-ethyl-2-oxazoline (PEOXA) ligands for superparamagnetic Fe3 O4 nanoparticles (NPs) generate ultra-dense and highly compact shells, providing enhanced colloidal stability and bio-inertness in physiological media. When linear brush shells fail in providing colloidal stabilization to NPs, the cyclic ones assure long lasting dispersions. While the thermally induced dehydration of linear PEOXA shells cause irreversible aggregation of the NPs, the collapse and subsequent rehydration of similarly grafted cyclic brushes allow the full recovery of individually dispersed NPs. Although linear ligands are densely grafted onto Fe3 O4 cores, a small plasma protein such as bovine serum albumin (BSA) still physisorbs within their shells. In contrast, the impenetrable entropic shield provided by cyclic brushes efficiently prevents nonspecific interaction with proteins.
RESUMEN
Osteoarthritis leads to an alteration in the composition of the synovial fluid, which is associated with an increase in friction and the progressive and irreversible destruction of the articular cartilage. In order to tackle this degenerative disease, there has been a growing interest in the medical field to establish effective, long-term treatments to restore cartilage lubrication after damage. Here we develop a series of graft-copolymers capable of assembling selectively on the degraded cartilage, resurfacing it, and restoring the lubricating properties of the native tissue. These comprise a polyglutamic acid backbone (PGA) coupled to brush-forming, poly-2-methyl-2-oxazoline (PMOXA) side chains, which provide biopassivity and lubricity to the surface, and to aldehyde-bearing tissue-reactive groups, for the anchoring on the degenerated cartilage via Schiff bases. Optimization of the graft-copolymer architecture (i.e., density and length of side chains and amount of tissue-reactive functions) allowed a uniform passivation of the degraded cartilage surface. Graft-copolymer-treated cartilage showed very low coefficients of friction within synovial fluid, reestablishing and in some cases improving the lubricating properties of the natural cartilage. Due to these distinctive properties and their high biocompatibility and stability under physiological conditions, cartilage-reactive graft-copolymers emerge as promising injectable formulations to slow down the progression of cartilage degradation, which characterizes the early stages of osteoarthritis.