Distal Clavicular Resection Worsens Outcomes in Rotator Cuff Repair: A National Database Study.

Introduction: Distal clavicular resection (DCR) is a procedure used to alleviate acromioclavicular joint (ACJ) pain, often done alongside rotator cuff repair (RCR). This investigation explored the relationships between DCR and RCR, outcomes of DCR during RCR, and complication rates of DCR. Methods: This retrospective study used electronic medical record data from the TriNetX database. Cohorts were subdivided based on the timeline of DCR in comparison to RCR, as well as comparing RCR with DCR against RCR without DCR. Results: In total 46 534 patients underwent RCR with 14.8% (6898) of these patients also undergoing DCR. And 72.8% (5021) had DCR during RCR, and 10.7% (740) had DCR after RCR. Less than 5% (<10) of patients with preexisting ACJ pain required DCR 3 years postoperatively, and 0.002% (78) patients without ACJ pain developed ACJ pain within 3 years. Less that 20 patients underwent DCR within 3 years of being diagnosed with ACJ pain. Patients who had RCR with DCR were more likely to have chronic pain postoperatively (P < .0001). Conclusion: Patients undergoing RCR do not require subsequent DCR. Performing DCR does not offer significant benefit when compared to performing isolated RCR without DCR in patients with preexisting ACJ pain, but increases risk for ACJ instability and chronic pain.

Renal dysfunction in adults following cardiopulmonary bypass is linked to declines in S-nitroso hemoglobin: a case series.

Background: Impaired kidney function is frequently observed in patients following cardiopulmonary bypass (CPB). Our group has previously linked blood transfusion to acute declines in S-nitroso haemoglobin (SNO-Hb; the main regulator of tissue oxygen delivery), reductions in intraoperative renal blood flow, and postoperative kidney dysfunction. While not all CPB patients receive blood, kidney injury is still common. We hypothesized that the CPB procedure itself may negatively impact SNO-Hb levels leading to renal dysfunction. Materials and methods: After obtaining written informed consent, blood samples were procured immediately before and after CPB, and on postoperative day (POD) 1. SNO-Hb levels, renal function (estimated glomerular filtration rate; eGFR), and plasma erythropoietin (EPO) concentrations were quantified. Additional outcome data were extracted from the patients' medical records. Results: Twenty-seven patients were enroled, three withdrew consent, and one was excluded after developing bacteremia. SNO-Hb levels declined after surgery and were directly correlated with declines in eGFR (R=0.48). Conversely, plasma EPO concentrations were elevated and inversely correlated with SNO-Hb (R=-0.53) and eGFR (R=-0.55). Finally, ICU stay negatively correlated with SNO-Hb concentration (R=-0.32). Conclusion: SNO-Hb levels are reduced following CPB in the absence of allogenic blood transfusion and are predictive of decreased renal function and prolonged ICU stay. Thus, therapies directed at maintaining or increasing SNO-Hb levels may improve outcomes in adult patients undergoing cardiac surgery.

Optimizing calibration of modern skeletal maturity systems.

Purpose: Greulich and Pyle is the most used system to estimate skeletal maturity but has significant drawbacks, prompting the development of newer skeletal maturity systems, such as the modified Fels skeletal maturity systems based on knee radiographs. To create a new skeletal maturity system, an outcome variable, termed a "skeletal maturity standard," must be selected for calibration of the system. Peak height velocity and 90% of final height are both considered reasonable skeletal maturity standards for skeletal maturity system development. We sought to answer two questions: (1) Does a skeletal maturity system developed using 90% of final height estimate skeletal age as well as it would if it was instead developed using peak height velocity? (2) Does a skeletal maturity system developed using 90% of final height perform as well in lower extremity length prediction as it would if it was instead developed using peak height velocity? Methods: The modified Fels knee skeletal maturity system was recalibrated based on 90% of final height and peak height velocity skeletal maturity standards. These models were applied to 133 serially obtained, peripubertal antero-posterior knee radiographs collected from 38 subjects. Each model was used to estimate the skeletal age of each radiograph. Skeletal age estimates were also used to predict each patient's ultimate femoral and tibial length using the White-Menelaus method. Results: The skeletal maturity system calibrated with 90% of final height produced more accurate skeletal age estimates than the same skeletal maturity system calibrated with peak height velocity (p < 0.05). The 90% of final height and peak height velocity models made similar femoral and tibial length predictions (p > 0.05). Conclusion: Using the 90% of final height skeletal maturity standard allows for simpler skeletal maturity system development than peak height velocity with potentially more accuracy.

High Prevalence of Work-related Musculoskeletal Disorders and Limited Evidence-based Ergonomics in Orthopaedic Surgery: A Systematic Review.

BACKGROUND: The Centers for Disease Control defines work-related musculoskeletal disorders as disorders of the nerves, muscles, tendons, joints, spinal discs, and cartilage that are caused or exacerbated by the environment or nature of work. Previous meta-analyses have characterized work-related musculoskeletal disorders among interventionists, general surgeons, and other surgical subspecialties, but prevalence estimates, prognosis, and ergonomic considerations vary by study and surgical specialty. QUESTIONS/PURPOSES: (1) What is the career prevalence of work-related musculoskeletal disorders in orthopaedic surgeons? (2) What is the treatment prevalence associated with work-related musculoskeletal disorders in orthopaedic surgeons? (3) What is the disability burden of work-related musculoskeletal disorders in orthopaedic surgeons? (4) What is the scope of orthopaedic surgical ergonomic assessments and interventions? METHODS: A systematic review of English-language studies from PubMed, MEDLINE, Embase, and Scopus was performed in December 2022 and reported in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. Studies that presented prevalence estimates of work-related musculoskeletal disorders or assessed surgical ergonomics in orthopaedic surgery were included. Reviews, case reports, gray literature (conference abstracts and preprints), and studies with mixed-surgeon (nonorthopaedic) populations were excluded. The search yielded 5603 abstracts; 24 survey-based studies with 4876 orthopaedic surgeons (mean age 48 years; 79% of surgeons were men) were included for an analysis of work-related musculoskeletal disorders, and 18 articles were included for a descriptive synthesis of ergonomic assessment. Quality assessment using the Joanna Briggs Institute Tool revealed that studies had a low to moderate risk of bias, largely because of self-reporting survey-based methodology. Because of considerable heterogeneity and risk of bias, prevalence outcomes were not pooled and instead are presented as ranges (mean I 2 = 91.3%). RESULTS: The career prevalence of work-related musculoskeletal disorders in orthopaedic surgeons ranged from 37% to 97%. By anatomic location, the prevalence of work-related musculoskeletal disorders in the head and neck ranged from 4% to 74%; back ranged from 9% to 77%; forearm, wrist, and hand ranged from 12% to 54%; elbow ranged from 3% to 28%; shoulder ranged from 3% to 34%; hip and thigh ranged from 1% to 10%; knee and lower leg ranged from 1% to 31%; and foot and ankle ranged from 4% to 25%. Of orthopaedic surgeons reporting work-related musculoskeletal disorders, 9% to 33% had a leave of absence, practice restriction or modification, or early retirement, and 27% to 83% received some form of treatment. Orthopaedic surgeons experienced biomechanical, cardiovascular, neuromuscular, and metabolic stress during procedures. Interventions to improve orthopaedic surgical ergonomics have been limited, but have included robotic assistance, proper visualization aids, appropriate use of power tools, and safely minimizing lead apron use. In hip and knee arthroplasty, robotic assistance was the most effective in improving posture and reducing caloric expenditure. In spine surgery, proper use of surgical loupes was the most effective in improving posture. CONCLUSION: Although the reported ranges of our main findings were wide, even on the low end of the reported ranges, work-related musculoskeletal disability among orthopaedic surgeons appears to be a substantial concern. We recommend that orthopaedic residency training programs incorporate surgical ergonomics or work injury lectures, workshops, and film review (alongside existing film review of surgical skills) into their curricula. We suggest hospitals engage in shared decision-making with surgeons through anonymous needs assessment surveys to implement wellness programs specific to surgeons' musculoskeletal needs. We urge institutions to assess surgeon ergonomics during routine quality assessment of novel surgical instruments and workflows. LEVEL OF EVIDENCE: Level III, prognostic study.

Mark-Up Trends in Contemporary Medicare Primary and Revision Total Joint Arthroplasty.

BACKGROUND: Understanding mark-up ratios (MRs), the ratio between a healthcare institution's submitted charge and the Medicare payment received, for high-volume orthopaedic procedures is imperative to inform policy about price transparency and reducing surprise billing. This analysis examined the MRs for primary and revision total hip and knee arthroplasty (THA and TKA) services to Medicare beneficiaries between 2013 and 2019 across healthcare settings and geographic regions. METHODS: A large dataset was queried for all THA and TKA procedures performed by orthopaedic surgeons between 2013 and 2019, using Healthcare Common Procedure Coding System (HCPCS) codes for the most frequently used services. Yearly MRs, service counts, average submitted charges, average allowed payments, and average Medicare payments were analyzed. Trends in MRs were assessed. We evaluated 9 THA HCPCS codes, averaging 159,297 procedures a year provided by a mean of 5,330 surgeons. We evaluated 6 TKA HCPCS codes, averaging 290,244 procedures a year provided by a mean of 7,308 surgeons. RESULTS: For knee arthroplasty procedures, a decrease was noted for HCPCS code 27438 (patellar arthroplasty with prosthesis) over the study period (8.30 to 6.62; P = .016) and HCPCS code 27447 (TKA) had the highest median (interquartile range [IQR]) MR (4.73 [3.64 to 6.30]). For revision knee procedures, the highest median (IQR) MR was for HCPCS code 27488 (removal of knee prosthesis; 6.12 [3.83-8.22]). While no trends were noted for both primary and revision hip arthroplasty, median (IQR) MRs in 2019 for primary hip procedures ranged from 3.83 (hemiarthroplasty) to 5.06 (conversion of previous hip surgery to THA) and HCPCS code 27130 (total hip arthroplasty) had a median (IQR) MR of 4.66 (3.58-6.44). For revision hip procedures, MRs ranged from 3.79 (open treatment of femoral fracture or prosthetic arthroplasty) to 6.10 (revision of THA femoral component). Wisconsin had the highest median MR by state (>9) for primary knee, revision knee, and primary hip procedures. CONCLUSION: The MRs for primary and revision THA and TKA procedures were strikingly high, as compared to nonorthopaedic procedures. These findings represent high levels of excess charges billed, which may pose serious financial burdens to patients and must be taken into consideration in future policy discussions to avoid price inflation.