Narcissistic self-sorting in Zn(II) porphyrin derived semiconducting nanostructures.

The narcissistic self-sorted phenomenon is explicitly attributed to the structural similarities in organic molecules. Although such relevant materials are rarely explored, self-sorted structures from macrocyclic π-conjugated-based p- and n-type organic semiconductors facilitate the increase of exciton dissociation and charge separation in bulk heterojunction solar cells. Herein, we report two extended π-conjugated derivatives consisting of zinc-porphyrin-linked benzothiadiazole acting as an acceptor (PB) and anthracene as a donor (PA). Despite having the same porphyrin π-conjugated core in PA and PB, variations in donor and acceptor moieties make the molecular packing form one-dimensional (1D) self-assembled nanofibers via H- and J-type aggregates. Interestingly, a dissimilar aggregate of PA and PB exists as a mixture (PA + PB), promoting narcissistic self-sorted structures. Electrochemical impedance investigation reveals that the electronic characteristics of self-sorting assemblies are influenced by the difference in electrostatic potentials for PA and PB, resulting in a transitional electrical conductivity of 0.14 S cm-1. Therefore, the design of such materials for the fabrication of effective photovoltaics is promoted by these extraordinary self-sorted behaviors in comparable organic π-conjugated molecules.

Efficient Photocatalytic CO2 Reduction with High Selectivity for Ethanol by Synergistically Coupled MXene-Ceria and the Charge Carrier Dynamics.

The primary factors that govern the selectivity and efficacy of CO2 photoreduction are the degree of activation of CO2 on the active surface sites of photocatalysts and charge separation/transfer kinetics. In this context, the rational synthesis of heterostructured MXene-coupled CeO2-based photocatalysts with different loading concentrations of Ti3C2MXene via a one-step hydrothermal approach has been undertaken. These photocatalysts exhibit a shift in X-ray diffraction peaks to higher 2θ values and changes in stretching vibrations of 5 wt % Ti3C2MXene/CeO2(5-TC/Ce) that indicate interaction between Ti3C2MXene and CeO2. Moreover, XPS analysis confirms the presence of the Ce3+/Ce4+ states. A sharp band at 2335 cm-1 observed during the CO2 photoreduction process corresponds to bidentate b-CO32-, which facilitates the adsorption of CO2 at the surface of the catalyst as revealed by the TPD analysis. Furthermore, the Schryvers test and NMR analysis were undertaken to confirm the formaldehyde intermediate formation during CO2 photoreduction to C2H5OH. The decrease in emission intensity, reduced lifetimes (2.68 ns), and lower interfacial resistance, as revealed by PL, TR-PL, and EIS analysis, imply an efficient charge separation and charge transfer in the case of the Ti3C2MXene/CeO2 heterojunction. The decrease in the intensity of peaks in the EPR spectrum in the case of 5-TC/Ce further confirms efficient charge transfer kinetics across the interface. The optimized 5-TC/Ce shows CO2 reduction with a drastically enhanced yield of ethanol on the order of 6127 µmol g-1 at 5 h with 98% selectivity and 7.54% apparent quantum efficiency, which is 6-fold higher than that of ethanol produced by bare CeO2. Herein, CeO2 that acts as a redox couple (Ce3+/Ce4+) when coupled with MXene having a metallic nature that reduces the electron transfer resistance is in unison, enabling an enhanced mobilization of electrons. Thereby, the synergistic coupling of Ti3C2MXene with CeO2 leads to an efficient photoreduction of CO2 under visible light illumination.

Efficient Photocatalytic Reduction of Hexavalent Chromium by BiVO4-Decorated MXene Photocatalysts and Their Charge Carrier Dynamics.

The synergistically MXene (Ti3C2Tx) co-catalyst-decorated BiVO4-based heterostructured photocatalysts have been synthesized by a hydrothermal approach with varied loading concentrations of MXene (Ti3C2Tx) to drive the hexavalent chromium reduction efficiently. The formation of the heterostructured photocatalyst was confirmed by the appearance of X-ray diffraction (XRD) peaks corresponding to the monoclinic BiVO4 phase and MXene (Ti3C2Tx) and also the antisymmetric (834 cm-1) and symmetric stretching (715 cm-1) of tetrahedral VO4 and D (1330 cm-1) and G (1570 cm-1) bands corresponding to MXene (Ti3C2Tx) in the Raman spectrum. The worm-like structures of BiVO4 nanocrystals grew onto the lamellar sheets of MXene (Ti3C2Tx), as shown by field emission scanning electron microscopy (FESEM), and has an increased surface area of 15.62 m2g-1 in the case of BVO-20-TC. X-ray photoelectron spectroscopy (XPS) analysis confirms the presence of V5+ and Ti3+states, and the uniform distribution of BiVO4 nanocrystals over lamellar sheets of MXene (Ti3C2Tx) is evident from energy-dispersive X-ray (EDX) analysis. The ultraviolet-diffuse reflectance spectroscopy (UV-DRS) spectra suggest a decrease in the band gap energy of BVO-20-TC to 2.335 eV, promoting a higher degree of visible light harvesting. Upon optimization, by varying the pH, the amount of the photocatalyst, and the concentration of Cr(IV), BVO-20-TC exhibits the highest photocatalytic efficiency (96.39%) while using a Cr(VI) concentration of 10 ppm at pH 2 and 15 mg of the photocatalyst, and the photoreduction of Cr(VI) to Cr(III) follows the pseudo-first-order reaction. The decrease in the PL intensity in BVO-20-TC reveals a faster transfer of electrons from MXene (Ti3C2Tx) to BiVO4. Further, the higher degree of band bending at the BiVO4/MXene (Ti3C2Tx) heterojunction, revealed from the Mott-Schottky analysis, facilitates efficient charge transfer and eventually faster and efficient photoreduction of Cr(VI) to Cr(III). The reusability and stability test undertaken for BVO-20-TC reveals that even after five cycles, the Cr (VI) photoreduction efficacy is retained. This work provides insights into photoreduction of Cr (VI) by using such heterostructures.

Synthesis and Opto-electronic Properties of BODIPY o-OPhos Systems.

Herein, we report the versatile synthetic strategy and opto-electronic properties for the phosphorylation of BODIPY derivatives 5aa-5ak by substituting with an electron-donating/withdrawing group at the ortho position. Nevertheless, this new methodology relatively promotes the tolerance of the aldehyde moiety and the high yield for the synthesis of BODIPY o-OPhos derivatives. The photophysical studies suggest improved optical properties due to the inductive effect of various electron-donating/withdrawing groups. The UV-visible and the emission data suggest that BODIPY o-OPhos derivatives emphasize the property of the excited states with an increase in fluorescence intensity and high quantum yields due to the presence of bulky phospsho-triester at the meso- position which hinders the free rotation around the C-Ar bond and facilitates the development of OLEDs and various organophosphorus warfare agents. Electrochemical studies reveal 5ak depicts the ease of redox activity amongst the 5aa-5ak derivatives. The density functional theory indicates the highest occupied molecular orbital on the BODIPY moiety whereas the lowest unoccupied molecular orbital delocalized on BODIPY and the phospho-triester moieties. Thus, the unique development of the novel BODIPY derivatives with improved optical and redox properties pave the way for fluorescent probes and bioimaging techniques.

Metal-free propargylation/aza-annulation approach to substituted ß-carbolines and evaluation of their photophysical properties.

An efficient acid-catalyzed propargylation/aza-annulation sequence was developed under metal-free reaction conditions, thus leading to a one-pot synthesis of a variety of substituted ß-carbolines starting from propargylic alcohols and indole 2-carbonyls. This versatile strategy was further extended to the synthesis of 5-azaindoles and 5-azabenzothiazoles. Optical properties suggested that manipulation of electron donor and acceptor moieties on ß-carbolines has an impact on their ground and excited state electronic behavior. This leads to blue or green emission and should facilitate the development of organic light emitting diodes (OLEDs). Electrochemical and stability studies revealed that 4a-6 shows ease of redox activity and photostability during illumination.

Voltage Stimulated Anion Binding of Metalloporphyrin-induced Crystalline 2D Nanoflakes.

Voltage-stimulated redox-active materials have received significant attention in the field of organic electronics and sensor technology. Such stimuli-responsive materials trigger the formation of crystalline nanostructures and facilitate the design of efficient smart devices hitherto unknown. Herein, we report that free-base and metallo-tetratolylporphyrin-linked ferrocene derivatives (H2 TTP-Fc and ZnTTP-Fc) undergo distinct proton/anion binding mechanism in CHCl3 during bulk electrolysis at applied voltage of 1.4 V to give [H4 TTP-Fc]+ Cl- and H+ [(Cl)ZnTTP-Fc]- followed by nanospheres and crystalline 2D nanoflakes formation, confirmed by SEM and TEM images, by methanol vapor diffusion (MVD) approach. Moreover, X-ray diffraction analysis suggest that protonated H2 TTP-Fc aggregates exhibit amorphous nature, whereas H+ [(Cl)ZnTTP-Fc]- depict crystalline nature from layer-by-layer arrangement of nanoflakes assisted by π-π stacking and ion-dipole interactions.

Stipulating Low Production Cost Solar Cells All Set to Retail !

Today's solar cells are exceptionally in demand whilst excess exploitation of natural fossil fuels. In this context, the first and second generation solar cells commercially available in market for more than decades however limitations in production cost and large-scale applications insist to generate inexpensive materials for fabrication. Thereby, organic materials based solar cells explored and emerging as third generation solar cells which possess flexibility, low cost and large-scale applications. For example, organic photovoltaics, dye sensitized solar cells and perovskite (organic-inorganic) solar cells (PSCs) are considered third generation solar cells wherein PSCs reached the record power conversion efficiency (PCE ∼23 %) and durability assists great advantages for commercialization in near future. Moreover, we reported various global renowned companies involved producing the modules and materials for three generation solar cells, hence, majority of companies considered commercialization of perovskite based solar cells assist low cost photovoltaics to meet the current energy necessities and environmental safety.

Recent Advances on Stimuli-Responsive Smart Materials and their Applications.

Stimuli-responsive materials have raised major attention in digital technology, sensors and biomedical applications owing to quick response towards external stimuli, for example light, voltage, pressure, temperature, mechanical friction and pH. Nevertheless, action of external stimuli on organic materials affects their internal physico-chemical properties and facilitates improved thermal/photo stability, tuning detection sensitivity, accuracy and biocompatibility. This review article highlights recent progress on stimuli-responsive materials with mixed valence species, viologens, twisting chirality, crystalline/amorphous, sol-gel phase transitions and resulting supramolecular nanostructures via non-covalent interactions. These materials can be applied in flexible electronics, drug delivery, detection of pollutants and bioimaging. Thus, the demand for widespread research on development of stimuli-responsive materials are requisite to resolve the challenges pertaining to stability and sensitivity of devices for design in comprehensive technology.

Role of Co-Sensitizers in Dye-Sensitized Solar Cells.

Co-sensitization is a popular route towards improved efficiency and stability of dye-sensitized solar cells (DSSCs). In this context, the power conversion efficiency (PCE) values of DSSCs incorporating Ru- and porphyrin-based dyes can be improved from 8-11 % to 11-14 % after the addition of additives, co-adsorbents, and co-sensitizers that reduce aggregation and charge recombination in the device. Among the three supporting material types, co-sensitizers play a major role to enhance the performance and stability of DSSCs, which is requried for commercialization. In this Minireview, we highlight the role co-sensitizers play in improving photovoltaic performance of devices containing Ru- and porphyrin-based sensitizers.

Light induced oxidation of an indoline derived system triggered spherical aggregates.

Indoline based donor-acceptor system (InBT) exhibits a colour transition from pink to orange to yellow in chloroform facilitated by the photo-oxidation of the N,N-dimethyl indoline of InBT and neutralized by chloride counter ions upon light irradiation at short and long range excitation wavelengths of 320 and 500 nm, which leads to spherical aggregates when subjected to methanol vapour diffusion (MVD).

Emerging of Inorganic Hole Transporting Materials For Perovskite Solar Cells.

Hole transporting material (HTM) is a significant component to achieve the high performance perovskite solar cells (PSCs). Over the years, inorganic, organic and hybrid (organic-inorganic) material based HTMs have been developed and investigated successfully. Today, perovskite solar cells achieved the efficiency of 22.1 % with with 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine) 9,9-spirobifluorene (spiro-OMeTAD) as HTM. Nevertheless, synthesis and cost of organic HTMs is a major challenging issue and therefore alternative materials are required. From the past few years, inorganic HTMs showed large improvement in power conversion efficiency (PCE) and stability. Recently CuOx reached the PCE of 19.0% with better stability. These developments affirms that inorganic HTMs are better alternativesto the organic HTMs for next generation PSCs. In this report, we mainly focussed on the recent advances of inorganic and hybrid HTMs for PSCs and highlighted the efficiency and stability of PSCs improved by changing metal oxides as HTMs. Consequently, we expect that energy levels of these inorganic HTMs matches very well with the valence band of perovskites and improved efficiency helps in future practical deployment of low cost PSCs.

Unprecedented Charge-Transfer Complex of Fused Diporphyrin as Near-Infrared Absorption-Induced High-Aspect-Ratio Nanorods.

Charge-transfer (CT) complexes of near-infrared absorbing systems have been unknown until now. Consequently, structural similarities between donor and acceptor are rather important to achieve this phenomenon. Herein, we report electron donors such as non-fused diporphyrin-anthracene (DP), zinc diporphyrin-anthracene (ZnDP) and fused zinc diporphyrin-anthracene (FZnDP) in which FZnDP absorbs in NIR region and permits a CT complex with the electron acceptor, perylene diimide (PDI) in CHCl3 exclusively. UV/Vis-NIR absorption, 1 H NMR, NOESY and powder X-ray diffraction analysis demonstrated that the CT complex formation occurs by π-π stacking between perylene units in FZnDP and PDI upon mixing together in a 1:1 molar concentration in CHCl3 , unlike non-fused ZnDP and DP. TEM and AFM images revealed that the CT complex initially forms nanospheres leading to nanorods by diffusion of CH3 OH vapors into the CHCl3 solution of FZnDP/PDI (1:1 molar ratio). Therefore, these CT nanorods could lead to significant advances in optical, biological and ferroelectric applications.