Evaluation of structural skeletal asymmetry of the glenoid fossa in adult patients with unilateral posterior crossbite using surface-to-surface matching on CBCT images.

OBJECTIVES: To compare, using surface-to-surface (StS) matching, any shape differences between the crossbite and noncrossbite side of the glenoid fossa and articular eminence in adult patients affected by posterior unilateral crossbite (PUXB) and compare them with unaffected controls. MATERIALS AND METHODS: 32 cone beam computed tomography (CBCT) scans of patients (mean age: 23.72 ± 3.74 years) undergoing surgical maxillary expansion were analyzed to obtain three-dimensional models of the left and right glenoid fossae that were superimposed using stable anatomical reference points and then compared using StS matching to evaluate the presence of any shape differences. These findings were compared with those obtained from 16 CBCT scans of unaffected controls (mean age: 23.72 ± 3.73 years). RESULTS: A mean difference of >11% was found between the study group and controls when comparing the matching percentages of the two sides of the glenoid fossa and articular eminence at all three levels of tolerance selected for this study. These differences were found to be highly statistically significant (P ≤ .0001). CONCLUSIONS: According to the shape analysis findings, adult PUXB patients exhibit a higher degree of glenoid fossa and articular eminence shape differences compared to unaffected controls.

One Step before 3D Printing-Evaluation of Imaging Software Accuracy for 3-Dimensional Analysis of the Mandible: A Comparative Study Using a Surface-to-Surface Matching Technique.

The accuracy of 3D reconstructions of the craniomaxillofacial region using cone beam computed tomography (CBCT) is important for the morphological evaluation of specific anatomical structures. Moreover, an accurate segmentation process is fundamental for the physical reconstruction of the anatomy (3D printing) when a preliminary simulation of the therapy is required. In this regard, the objective of this study is to evaluate the accuracy of four different types of software for the semiautomatic segmentation of the mandibular jaw compared to manual segmentation, used as a gold standard. Twenty cone beam computed tomography (CBCT) with a manual approach (Mimics) and a semi-automatic approach (Invesalius, ITK-Snap, Dolphin 3D, Slicer 3D) were selected for the segmentation of the mandible in the present study. The accuracy of semi-automatic segmentation was evaluated: (1) by comparing the mandibular volumes obtained with semi-automatic 3D rendering and manual segmentation and (2) by deviation analysis between the two mandibular models. An analysis of variance (ANOVA) was used to evaluate differences in mandibular volumetric recordings and for a deviation analysis among the different software types used. Linear regression was also performed between manual and semi-automatic methods. No significant differences were found in the total volumes among the obtained 3D mandibular models (Mimics = 40.85 cm3, ITK-Snap = 40.81 cm3, Invesalius = 40.04 cm3, Dolphin 3D = 42.03 cm3, Slicer 3D = 40.58 cm3). High correlations were found between the semi-automatic segmentation and manual segmentation approach, with R coefficients ranging from 0,960 to 0,992. According to the deviation analysis, the mandibular models obtained with ITK-Snap showed the highest matching percentage (Tolerance A = 88.44%, Tolerance B = 97.30%), while those obtained with Dolphin 3D showed the lowest matching percentage (Tolerance A = 60.01%, Tolerance B = 87.76%) (p < 0.05). Colour-coded maps showed that the area of greatest mismatch between semi-automatic and manual segmentation was the condylar region and the region proximate to the dental roots. Despite the fact that the semi-automatic segmentation of the mandible showed, in general, high reliability and high correlation with the manual segmentation, caution should be taken when evaluating the morphological and dimensional characteristics of the condyles either on CBCT-derived digital models or physical models (3D printing).

Evaluation of mandibular symmetry and morphology in adult patients with unilateral posterior crossbite: a CBCT study using a surface-to-surface matching technique.

OBJECTIVES: To investigate mandibular morphology in adults affected by posterior unilateral crossbite (PUXB) and to evaluate the hemi mandibular volumes from the crossbite (CB) and non-CB sides of the same patients. METHODS: Thirty-eight cone beam computed tomography (CBCT) images were consecutively recruited and the Digital Imaging and Communications in Medicine (DICOM)-formatted scans were volume rendered into a surface three-dimensional (3D) mesh model and volumes to obtain the 3D model of the mandibular bone. To achieve the surface point-to-point analysis of the mandibular models, a reverse engineering software was used. The same procedure was performed for an age-matched control group (19 CBCT images). RESULTS: Total mandibular volume showed a difference of 2.46 cm3 between patients and controls, which was not statistically significant. A mean difference of 1.53 cm3 was found comparing the hemi mandibular volumes from the CB and non-CB sides of PUXB patients, this difference was statistically significant (P ≤ 0.01). Findings for the surface-to-surface deviation analysis, demonstrated a higher percentage of mismatch in patients PUXB, over 10% at 0.5 mm tolerance level. LIMITATIONS: Limitations are related to the intrinsic surfaces matching methodology, that make difficult to evaluate discrepancies among different mandibular anatomical units. CONCLUSION: Adult patients affected by PUXB show a greater mandibular structural asymmetry compared to controls because of a lower matching percentage obtained from the surface-to-surface matching technique. IMPLICATIONS: Treatment of adult patients affected by PUXB should take into consideration the possibility of a mild mandibular asymmetry mainly localized at the condyle and gonial angle levels.

Influence of Dental Composite Viscosity in Attachment Reproduction: An Experimental in Vitro Study.

BACKGROUND: Attachments are composite auxiliaries that are used during a clear aligner orthodontic therapy to achieve difficult tooth movements. Two important factors are the planned configuration and the actual position of these auxiliary elements to obtain the desired force system. The aim of the present study was to evaluate the role of different composite materials in the correct reproduction of attachment shape and position. METHODS: The materials that were considered in the study were a flowable resin, a dental restorative material, and an orthodontic composite. The attachments were created on three models of extracted teeth. Once the impressions were performed, 25 attachments of different shapes were added onto each virtual model to obtain the necessary templates to make the attachments. Each tested material was used to create a set of 25 attachments that were then scanned with an accuracy of 10µm. The resultant STL (stereolithography) files were superimposed onto the ones from the initial virtual plan, through Geomagic software, and the aligned scans were then compared while using a color map. The parameters that were calculated to make a comparison between the created attachments and the ideal ones were the maximum deviation in defect and in excess, the overflow, and the volume's difference. In addition to these measurements comparing the three above-mentioned groups, the difference in volume between all the ideal and realized samples were analyzed. To test for differences among the three groups, a one-way Analysis of variance (ANOVA) was used with a Bonferroni post-hoc test. The level of significance was set at p < 0.05. RESULTS: No statistically significant results were found between the three groups regarding the maximum value in defect, the maximum value in excess, and the minimum value as control, while a statistically significant difference was found between the overflow of orthodontic resin when compared to the flowable composite. CONCLUSIONS: The three materials that were used in this study were appropriate for attachment fabrication. The fidelity of attachment reproduction was similar when using the three different composites. The orthodontic composite showed more overflow when compared with the flowable one.

Assessment of Vitamin C and Antioxidant Profiles in Saliva and Serum in Patients with Periodontitis and Ischemic Heart Disease.

Vitamin C and antioxidants play a crucial role in endothelial function and may be a link for the known interaction of periodontitis and ischemic heart disease (CAD). This pilot study evaluates the association of gingival health, periodontitis, CAD, or both conditions with salivary and serum vitamin C and antioxidant levels. The clinical and periodontal characteristics, serum, and saliva samples were collected from 36 patients with periodontitis, 35 patients with CAD, 36 patients with periodontitis plus CAD, and 36 healthy controls. Levels of vitamin C, antioxidants, and C-reactive protein (hs-CRP) were assessed with a commercially available kit. The median concentrations of salivary and serum vitamin C and antioxidants (α-tocopherol, ß-carotene, lutein, and lycopene) were significantly lower in the CAD group (p < 0.001) and in the periodontitis plus CAD group (p < 0.001) compared to periodontitis patients and controls. In univariate models, periodontitis (p = 0.034), CAD (p < 0.001), and hs-CRP (p < 0.001) were significantly negatively associated with serum vitamin C; whereas, in a multivariate model, only hs-CRP remained a significant predictor of serum vitamin C (p < 0.001). In a multivariate model, the significant predictors of salivary vitamin C levels were triglycerides (p = 0.028) and hs-CRP (p < 0.001). Patients with CAD and periodontitis plus CAD presented lower levels of salivary and serum vitamin C compared to healthy subjects and periodontitis patients. hs-CRP was a significant predictor of decreased salivary and serum vitamin C levels.

Three-dimensional analysis of mandibular functional units in adult patients with unilateral posterior crossbite: A cone beam study with the use of mirroring and surface-to-surface matching techniques.

OBJECTIVES: To use three-dimensional (3D) mirroring and surface-to-surface techniques to determine any differences in mandibular functional unit shape and morphology between the crossbite side and non-crossbite side in adult patients with posterior unilateral crossbite who had not received any corrective treatment for malocclusion. MATERIALS AND METHODS: Cone-beam computed tomography (CBCT) records from 24 consecutive adult white patients (mean age, 27.5 years; range 22.6-39.7 years; 14 women and 10 men) seeking treatment for maxillary transverse deficiency were assessed in this study. The control group comprised CBCT scans from age- and sex-matched patients. Segmentation masks were generated to obtain 3D surface mesh models of the mandibles and analyze the six skeletal functional units, which were further analyzed with reverse engineering software. RESULTS: Statistically significant differences in the mean surface distance when comparing the study sample and the control sample were found at the condylar process, mandibular ramus, angular process (P ≤ .0001), and alveolar process (P ≤ .01); no statistically significant differences were found for the coronoid process, the chin, and the mandibular body (P ≥ .5). CONCLUSIONS: The condylar, angular, and alveolar processes plus the mandibular ramus appear to play a more dominant role than did the body, the coronoid, and the chin units in the asymmetry of the mandible in patients with unilateral crossbite.

Three-dimensional evaluations of the digital casts of morphologic maxillary teeth symmetry in patients with unilateral palatally displaced canines.

INTRODUCTION: The goal of this study was to compare the size and morphologic symmetry of the maxillary teeth in subjects with and without unilateral palatally displaced canines (PDCs). METHODS: Plaster casts of 38 subjects (mean age 14.75 ± 0.95 y) with unilateral PDCs were selected (study group [SG]) and compared with casts from an age- and sex-matched control group (CG). Then dental casts of both groups were scanned into 3-dimensional (3D) models. Tooth sizes (mesiodistal [MD] and buccolingual [BL] widths and volumes) for SG and CG were measured. Afterward, 3D deviation analysis was carried out with the use of Geomagic Control X software. All of the data were normally distributed according to parametric tests. RESULTS: All of the maxillary tooth diameters were smaller in SG than in CG. Statistically significant differences (P ≤ 0.001) were obtained when comparing the widths and volumes of the PDC quadrant and the unaffected quadrant of the same patient. Morphologic tooth symmetry by surface-to-surface matching for SG (PDC side vs non-PDC side) and CG (right vs left quadrant) demonstrated significant (P ≤ 0.001) but small differences, except for the lateral upper incisors (71.27%). CONCLUSIONS: Unlike control subjects, PDC patients showed high mismatching of lateral incisor crowns of ∼30%.

Morphology of palatally displaced canines and adjacent teeth, a 3-D evaluation from cone-beam computed tomographic images.

BACKGROUND: The goal of this study was to investigate in patients with unilateral palatally displaced canine (PDC) the morphology of maxillary teeth from cone-beam computed tomography (CBCT) scans both on the PDC side and non-PDC side using a "surface matching" technique. METHODS: CBCT images from 28 patients (mean age 16.04 ± 1.77 years) with unilateral PDC were selected. Each tooth in this study was segmented and then rendered into a 3D model using Mimics Research software and the root length was measured. Afterwards, 3D deviation analysis between the PDC and non-PDC side was carried out using Geomagic Control X software. RESULTS: Statistically significant differences (p ≤ 0.001) were obtained when comparing the root lengths and volumes of lateral incisors from the PDC side, non-PDC side and control group. In accordance with the findings of 3D deviation analysis, statistically significant differences between the patients and control group were obtained for the lateral incisors and canines (p ≤ 0.0001) and greater differences were found for the tooth crowns and root tips. CONCLUSIONS: Lateral incisors adjacent to PDCs have shorter roots than contra-lateral lateral incisors. Furthermore, there were morphological differences between lateral incisors and canines in subjects with unilateral PDCs.

Three-dimensional evaluation on digital casts of maxillary palatal size and morphology in patients with functional posterior crossbite.

Background and objectives: Some authors have recently postulated the possibility of a unilateral contraction of the palate in patients with crossbite. This study aimed to investigate palatal dimension size and morphology in subjects with functional posterior crossbite and to localize location of the contraction through a 3D analysis procedure. Materials and methods: A study sample (SS) of 35 subjects (mean age 9.2 ± 0.8 years), diagnosed with functional crossbite, and a control sample (CS) of 35 subjects (mean age 9.4 ± 0.9 years) without crossbite were selected for this study. The digital models of each patient were analysed to assess palatal dimension size and symmetry by measuring linear distances between primary canines (D1) and fist molars (D2) to the median palatine plane and by performing and analysing the 3D deviation between the two specular models of the palatal vault for each patient. Results: Our findings demonstrate a significantly narrower dimension of D2 for the crossbite side than at the non-crossbite side. The 3D deviation analysis demonstrates a lower matching percentage of the palatal vault models in the SS (83.36%) compared with the CS (92.82%) and a location of that the palatal contraction is at the alveolar bone level. Conclusions: It can be assumed that there is a bilateral symmetrical contraction of the palatal vault and an asymmetric contraction of the alveolar process, but further studies are needed to corroborate this hypothesis.