We report the site-selective α-aryloxyalkyl C-H cyanation and allylation of aryl alkyl ethers using an acridinium photocatalyst with phosphate base under LED irradiation (456 nm). Oxidation of the aryl alkyl ether to its corresponding radical cation by the excited stated photocatalyst allowed facile deprotonation of the ArOC(sp3)-H bond to afford an α-aryloxyalkyl radical, which was trapped with sulfone substrates, resulting in expulsion of a sulfonyl radical and formation of allylated or cyanated products.
This paper reports the first examples of ground state radical-mediated intramolecular C-H amination to afford 1-methyl-1,2,3,4-tetrahydroquinolines from N-2,4-dinitrophenoxy derivatives of arylpropylamines. Whereas the photoactivation of N-2,4-dinitrophenoxyamines for intermolecular reactions has been established, ground state chemistry provides the desired cyclization products in moderate to excellent yields using Ru(bpy)3Cl2 (42-95% yields) under acidic conditions under an air atmosphere.
The air-stable complex Ni(COD)(DQ) (COD = 1,5-cyclooctadiene, DQ = duroquinone) promotes the coupling of aryl halides to arenes in the presence of KOtBu. This complex has recently been shown to perform coupling reactions based on organonickel intermediates, but in this case the coupling reactions proceed via aryl radicals as shown by our newly developed assay for aryl radicals. Coupling with this nickel source is more efficient than with Ni(COD)2, Ni(PPh3)4 and Ni(acac)2, all of which we also show to operate through aryl radical pathways.
Aryl radicals are intermediates in many reactions, but determining their presence unambiguously is often challenging. As we recently reported, reaction of 2-iodo-1,3-dimethylbenzene (7) in benzene with KOtBu and a suitable organic additive, leads to a base-induced homolytic aromatic substitution (BHAS) coupling reaction giving 2,6-dimethylbiphenyl (12) and biphenyl (3) as coupled products, together with xylene (13). In this case, biphenyl arises from a radical translocation and is the major coupling product. This paper now quantitatively investigates that reaction, which shows a very similar ratio for 3 : 12 [ca. 4 : 1] when using different sources of radical initiation. Deuterium isotope studies provide detailed mechanistic support for the proposed mechanism; when carried out in C6D6vs. C6H6, the reaction is characterised by a strong isotope effect for formation of 3-d10vs. 3, but not for formation of 12-d5vs. 12. These distinctive properties mean that the transformation can act as an assay for aryl radicals. An advantage of such a BHAS process is its sensitivity, since it involves a chain reaction that can amplify radical activity.
Bicyclo[1.1.1]pentane (BCP) derivatives have attracted significant recent interest in drug discovery as alkyne, tert-butyl and arene bioisosteres, where their incorporation is frequently associated with increased compound solubility and metabolic stability. While strategies for functionalisation of the bridgehead (1,3) positions are extensively developed, platforms allowing divergent substitution at the bridge (2,4,5) positions remain limited. Recent reports have introduced 1-electron strategies for arylation and incorporation of a small range of other substituents, but are limited in terms of scope, yields or practical complexity. Herein, we show the synthesis of diverse 1,2,3-trifunctionalised BCPs through lithium-halogen exchange of a readily accessible BCP bromide. When coupled with medicinally relevant product derivatisations, our developed 2-electron "late stage" approach provides rapid and straightforward access to unprecedented BCP structural diversity (>20â hitherto-unknown motifs reported). Additionally, we describe a method for the synthesis of enantioenriched "chiral-at-BCP" bicyclo[1.1.1]pentanes through a novel stereoselective bridgehead desymmetrisation.
Palladium salts and complexes were tested separately and in the presence of added ligands as potential sources of aryl radicals in ground-state coupling reactions of aryl halide with arenes under basic conditions (KOtBu). Our recently developed assay for aryl radicals was employed to test for aryl radicals. In this assay, aryl radicals derived from the test substrate, 1-iodo-2,6-dimethylbenzene 7, undergo base-promoted homolytic aromatic substitution (BHAS) with benzene to produce 2,6-dimethylbiphenyl 8 and biphenyl 9 in an approximately 1:4 ratio as well as m-xylene 10. The biphenyl arises from a diagnostic radical transfer reaction with the solvent benzene. Using substrate 7 with a range of Pd sources as potential initiators led to formation of 8, 9, and 10 in varying amounts. However, when any one of a range of diphosphinoferrocenes (e.g., dppf or dippf) or BINAP or the monophosphine, diphenylphosphinoferrocene, was added as a ligand to Pd(OAc)2, the ratio of [2,6-dimethylbiphenyl 8: biphenyl 9] moved decisively to that expected from the BHAS (radical) pathway. Further studies were conducted with dppf. When dppf was added to each of the other Pd sources, the ratio of coupled products was also diverted to that expected for radical BHAS chemistry. Deuterium isotope studies and radical trap experiments provide strong additional support for the involvement of aryl radicals. Accordingly, under these ground-state conditions, palladium sources, in the presence of defined ligands, convert aryl iodides to aryl radicals. A rationale is proposed for these observations.
The functionalisation of C-H bonds has been an enormous achievement in synthetic methodology, enabling new retrosynthetic disconnections and affording simple synthetic equivalents for synthons. Hydrogen atom transfer (HAT) is a key method for forming alkyl radicals from C-H substrates. Classic reactions, including the Barton nitrite ester reaction and Hofmann-Löffler-Freytag reaction, among others, provided early examples of HAT. However, recent developments in photoredox catalysis and electrochemistry have made HAT a powerful synthetic tool capable of introducing a wide range of functional groups into C-H bonds. Moreover, greater mechanistic insights into HAT have stimulated the development of increasingly site-selective protocols. Site-selectivity can be achieved through the tuning of electron density at certain C-H bonds using additives, a judicious choice of HAT reagent, and a solvent system. Herein, we describe the latest methods for functionalizing C-H/Si-H/Ge-H bonds using indirect HAT between 2018-2023, as well as a critical discussion of new HAT reagents, mechanistic aspects, substrate scopes, and background contexts of the protocols.
Herein, we report the decarboxylative Minisci heteroarylation of bicyclo[1.1.1]pentane (BCP) and 2-oxabicyclo[2.1.1]hexane (oBCH) derivatives at the bridge positions. In an operationally simple, photocatalyst-free process, free bridge carboxylic acids are directly coupled with nonprefunctionalized heteroarenes to provide rare examples of polysubstituted BCP and oBCH derivatives in synthetically useful yields. Additionally, the impact of the BCP core on the physicochemical properties of a representative example compared to those of its all-aromatic ortho- and meta-substituted analogues is evaluated.
We report highly selective photocatalytic functionalisations of alkyl groups in aryl alkyl ethers with a range of electron-poor alkenes using an acridinium catalyst with a phosphate base and irradiation with visible light (456 nm or 390 nm). Experiments indicate that the reaction operates via direct single-electron oxidation of the arene substrate ArOCHRR' to its radical cation by the excited state organic photocatalyst; this is followed by deprotonation of the ArOC-H in the radical cation to yield the radical ArOCËRR'. This radical then attacks the electrophile to form an intermediate alkyl radical that is reduced to complete the photocatalytic cycle. The oxidation step is selective for activated arenes (ArOR) over their non-activated counterparts and the subsequent deprotonation of the methoxy group affords the α-aryloxyalkyl radical that leads to a wide range of functionalised products in good to excellent yield.
The chemistry of nitrogen-centered radicals (NCRs) has plentiful applications in organic synthesis, and they continue to expand as our understanding of these reactive species increases. The utility of these reactive intermediates is demonstrated in the recent advances in C-H amination and the (di)amination of alkenes. Synthesis of previously challenging structures can be achieved by efficient functionalization of sp2 moieties without prefunctionalization, allowing for faster and more streamlined synthesis. This Review addresses the generation, reactivity, and application of NCRs, including, but not limited to, iminyl, aminyl, amidyl, and aminium species. Contributions from early discovery up to the most recent examples have been highlighted, covering radical initiation, thermolysis, photolysis, and, more recently, photoredox catalysis. Radical-mediated intermolecular amination of (hetero)arenes can occur with a variety of complex amine precursors, generating aniline derivatives, an important class of structures for drug discovery and development. Functionalization of olefins is achievable in high anti-Markovnikov regioselectivity and allows access to difunctionalized structures when the intermediate carbon radicals are trapped. Additionally, the reactivity of NCRs can be harnessed for the rapid construction of N-heterocycles such as pyrrolidines, phenanthridines, quinoxalines, and quinazolinones.
Alkenes , Nitrogen , Alkenes/chemistry , Amination , Amines/chemistry , Catalysis , Nitrogen/chemistry
Rearrangements of o-tolyl aryl ethers, amines, and sulfides with the Grubbs-Stoltz reagent (Et3SiH + KOtBu) were recently announced, in which the ethers were converted to o-hydroxydiarylmethanes, while the (o-tol)(Ar)NH amines were transformed into dihydroacridines. Radical mechanisms were proposed, based on prior evidence for triethylsilyl radicals in this reagent system. A detailed computational investigation of the rearrangements of the aryl tolyl ethers now instead supports an anionic Truce-Smiles rearrangement, where the initial benzyl anion can be formed by either of two pathways: (i) direct deprotonation of the tolyl methyl group under basic conditions or (ii) electron transfer to an initially formed benzyl radical. By contrast, the rearrangements of o-tolyl aryl amines depend on the nature of the amine. Secondary amines undergo deprotonation of the N-H followed by a radical rearrangement, to form dihydroacridines, while tertiary amines form both dihydroacridines and diarylmethanes through radical and/or anionic pathways. Overall, this study highlights the competition between the reactive intermediates formed by the Et3SiH/KOtBu system.
Photoredox chemistry with organic or transition metal agents has been reviewed in earlier years, but such is the pace of progress that we will overlap very little with earlier comprehensive reviews. This review first presents an overview of the area of research and then examines recent examples of C-C, C-N, C-O and C-S bond formations via radical intermediates with transition metal and organic radical promoters. Recent successes with Birch reductions are also included. The transition metal chemistry will be restricted to photocatalysts based on the most widely used metals, Ru and Ir, but includes coupling chemistries that take advantage of low-valent nickel, or occasionally copper, complexes to process the radicals that are formed. Our focus is on developments in the past 10 years (2011-2021). This period has also seen great advances in the chemistry of organic photoredox reagents and the review covers this area. The review is intended to present highlights and is not comprehensive.
"Escaping from flatland", by increasing the saturation level and three-dimensionality of drug-like compounds, can enhance their potency, selectivity and pharmacokinetic profile. One approach that has attracted considerable recent attention is the bioisosteric replacement of aromatic rings, internal alkynes and tert-butyl groups with bicyclo[1.1.1]pentane (BCP) units. While functionalisation of the tertiary bridgehead positions of BCP derivatives is well-documented, functionalisation of the three concyclic secondary bridge positions remains an emerging field. The unique properties of the BCP core present considerable synthetic challenges to the development of such transformations. However, the bridge positions provide novel vectors for drug discovery and applications in materials science, providing entry to novel chemical and intellectual property space. This Minireview aims to consolidate the major advances in the field, serving as a useful reference to guide further work that is expected in the coming years.
Substituted arylethylamines represent a key structural motif in natural, pharmaceutical, and agrochemical compounds. Access to such scaffolds has been the subject of long-standing synthetic interest. Herein, we report the synthesis of such scaffolds via a palladium-catalyzed C(sp3)-C(sp3) coupling between (chloromethyl)aryls and air-/moisture-stable N,N-dialkylaminomethyltrifluoroborate salts. Rapid hit identification was achieved using microscale high-throughput experimentation and was followed by millimolar-scale reaction parameter optimization. A range of structurally and electronically varied arylethylamine products were obtained in moderate to excellent yields (27-96%, >60 examples). The reaction mechanism is proposed to proceed via formation of a trialkylbenzylammonium species prior to oxidative addition.
Palladium , Salts , Catalysis
Integrins αvß5 and αvß3 are closely related, proangiogenic members of the wider RGD-binding integrin family. Due to their high sequence homology, the development of αvß5-selective compounds has remained elusive to synthetic and medicinal chemists. Herein, we describe a survey of SAR around a series of amide-containing 3-aryl-succinamic acid-based RGD mimetics. This resulted in the discovery of α,α,α-trifluorotolyl 12 which exhibits 800 × selectivity for αvß5versus αvß3 with a pyrrolidine amide linker that confers selectivity for αvß5 by positioning a key aryl ring in the SDL of αvß5 with good complementarity; binding in this mode is disfavoured in αvß3 due to clashes with key residues in the ß3-subunit. Compound 12 exhibits selective inhibition by a cell adhesion assay, high passive permeability and solubility which enables potential use of this inhibitor as an αvß5-selective in vitro tool compound.
Amides/pharmacology , Pyrrolidines/pharmacology , Receptors, Vitronectin/antagonists & inhibitors , Amides/chemical synthesis , Amides/metabolism , Cell Adhesion/drug effects , Humans , K562 Cells , Molecular Docking Simulation , Molecular Structure , Naphthyridines/chemical synthesis , Naphthyridines/metabolism , Naphthyridines/pharmacology , Protein Binding , Pyrrolidines/chemical synthesis , Pyrrolidines/metabolism , Receptors, Vitronectin/metabolism , Stereoisomerism , Structure-Activity Relationship
We report the first examples of radical cation Smiles rearrangements. A series of aryloxy alkylamines underwent spontaneous reaction, with the amino group displacing the ipso-alkoxy group through substitution, at ambient temperature and under photoactivation by visible light in the presence of an acridinium catalyst (5 mol%). The study was extended to 3-(2-methoxyphenyl)propan-1-amine derivatives, which lack an appropriate ipso leaving group. Here, efficient cyclisations resulted in displacement of the methoxy group and formation of tetrahydroquinolines.
The text-book mechanism of bimolecular nucleophilic aromatic substitutions (SNAr) reactions is a stepwise process that proceeds via a so-called Meisenheimer intermediate. Only recently the alternative, concerted version of this mechanism has gained acceptance as more and more examples thereof have been reported. But so far only isolated examples of concerted SNAr reactions have been described and a coherent picture of when a SNAr reaction proceeds via a stepwise and when via a concerted mechanism has not yet been established. Here key factors are identified that influence the mechanistic choice of SNAr reactions. Moreover, the electron affinity is used as a simple descriptor to make a prediction on whether a given aryl fluoride substrate favors a concerted or stepwise mechanism.
Hydrocarbons, Aromatic/chemistry , Quantum Theory , Molecular Structure
Intimate partner violence (IPV) is a significant public health problem that has profound effects on the physical and psychological well-being of millions of Americans. It is known that strangulation is one of the most lethal forms of IPV. Frequently, a lack of visible external trauma is present, and attempted strangulation may be accompanied by other more severe injuries to the head and face; thus, the signs and symptoms of nonfatal strangulation may be overlooked. Because the emergency department (ED) is frequently the first point of contact for an individual who has experienced any type of IPV, it is imperative that providers have the knowledge and skill set for the identification and management of this patient population. The purpose of this article is to present a discussion of the challenges faced by ED providers in the clinical decision-making process when caring for a patient who has experienced nonfatal strangulation.
Asphyxia/diagnosis , Asphyxia/therapy , Intimate Partner Violence , Emergency Service, Hospital , Female , Humans , Young Adult
Integrin inhibitors based on the tripeptide sequence Arg-Gly-Asp (RGD) are potential therapeutics for the treatment of idiopathic pulmonary fibrosis (IPF). Herein, we describe an expeditious three-step synthetic sequence of Horner-Wadsworth-Emmons olefination, diimide reduction, and global deprotection to synthesise cores for these compounds in high yields (63-83% over 3 steps) with no need for chromatography. Key to this transformation is the phosphoramidate protecting group, which is stable to metalation steps.
