"Dissolve-on-Demand" 3D Printed Materials: Polymerizable Eutectics for Generating High Modulus, Thermoresponsive and Photoswitchable Eutectogels.

Solvent-free photopolymerization of vinyl monomers to produce high modulus materials with applications in 3D printing and photoswitchable materials is demonstrated. Polymerizable eutectic (PE) mixtures are prepared by simply heating and stirring various molar ratios of N-isopropylacrylamide (NIPAM), acrylamide (AAm) and 2-hydroxyethyl methacrylate (HEMA). The structural and thermal properties of the resulting mixtures are evaluated by 1D and 2D NMR spectroscopy as well as differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). UV photocuring kinetics of the PE mixtures is evaluated via in situ photo-DSC and photorheology measurements. The PE mixtures cure rapidly and display storage moduli that are orders of magnitude greater than equivalent copolymers cured in an aqueous medium. The versatility of these PE systems is demonstrated through the addition of a photoswitchable spiropyran acrylate monomer, as well as applying the PE formulation as a stereolithography (SLA)-based 3D printing resin. Due to the hydrogen-bonding network in PE systems, 3D printing of the eutectic resin is possible in the absence of crosslinkers. The addition of a RAFT agent to reduce average polymer chain length enables 3D printing of materials which retain their shape and can be dissolved on demand in appropriate solvents.

Physicochemical and in vitro biological evaluation of an injectable self-healing quaternized chitosan/oxidized pectin hydrogel for potential use as a wound dressing material.

Injectable self-healing hydrogels are attractive materials for use as wound dressings. To prepare such hydrogels, the current study used quaternized chitosan (QCS) to improve the solubility and antibacterial activity and oxidized pectin (OPEC) to introduce aldehyde groups for Schiff's base reaction with the amine groups from QCS. Self-healing hydrogels were made by co-injection of polymer solutions at specific polymer concentrations and reagent ratios that optimized both Schiff's base reactions and ionic interactions. The optimal hydrogel displayed self-healing 30 min after cutting and continuous self-healing during continuous step strain analysis, rapid gelation (< 1 min), a storage modulus of 394 Pa, and hardness of 700 mN, and compressibility of 162 mN s. The adhesiveness of this hydrogel (133 Pa) was within a suitable range for application as a wound dressing. The extraction media from the hydrogel displayed no cytotoxicity to NCTC clone 929 cells and higher cell migration than the control. While the extraction media from the hydrogel was found not to have antibacterial properties, QCS was verified as having MIC50 of 0.04 mg/mL against both E. coli and S. aureus. Therefore, this injectable self-healing QCS/OPEC hydrogel has the potential use as a biocompatible hydrogel material for wound management.

Evaluation of surface layer stability of surface-modified polyester biomaterials.

Surface modification of biomaterials is a strategy used to improve cellular and in vivo outcomes. However, most studies do not evaluate the lifetime of the introduced surface layer, which is an important aspect affecting how a biomaterial will interact with a cellular environment both in the short and in the long term. This study evaluated the surface layer stability in vitro in buffer solution of materials produced from poly(lactic-co-glycolic acid) (50:50) and polycaprolactone modified by hydrolysis and/or grafting of hydrophilic polymers using grafting from approaches. The data presented in this study highlight the shortcomings of using model substrates (e.g., spun-coated films) rather than disks, particles, and scaffolds. It also illustrates how similar surface modification strategies in some cases result in very different lifetimes of the surface layer, thus emphasizing the need for these studies as analogies cannot always be drawn.

Challenges for the development of surface modified biodegradable polyester biomaterials: A chemistry perspective.

The design of current implants produced from biodegradable polyesters is based on strength and rate of degradation and tailored by the choice of polyester used. However, detailed knowledge about the degradation mechanism of surface modified materials with applications in biomaterials science and tissue engineering is currently lacking. This perspective aims to outline the need for a greater focus on analyzing the degradation of modified polyesters to ensure they can fulfil their intended function and that degradation products can effectively be cleared from the body. The status of the literature regarding surface modified polyesters is summarized to illustrate the main aspects investigated in recent studies and specifically the number of studies investigating the fate of the materials upon degradation.