RESUMEN
The current study was a preliminary evaluation of the feasibility and biologic features of three-dimensionally bio-printed tissue-engineered (3D bio-printed) vascular grafts comprising dermal fibroblast spheroids for venous replacement in rats and swine. The scaffold-free tubular tissue was made by the 3D bio-printer with normal human dermal fibroblasts. The tubular tissues were implanted into the infrarenal inferior vena cava of 4 male F344-rnu/rnu athymic nude rats and the short-term patency and histologic features were analyzed. A larger 3D bio-printed swine dermal fibroblast-derived prototype of tubular tissue was implanted into the right jugular vein of a swine and patency was evaluated at 4 weeks. The short-term patency rate was 100%. Immunohistochemistry analysis showed von Willebrand factor positivity on day 2, with more limited positivity observed on the luminal surface on day 5. Although the cross-sectional area of the wall differed significantly between preimplantation and days 2 and 5, suggesting swelling of the tubular tissue wall (both p < 0.01), the luminal diameter of the tubular tissues was not significantly altered during this period. The 3D bio-printed scaffold-free tubular tissues using human dermal or swine fibroblast spheroids may produce better tissue-engineered vascular grafts for venous replacement in rats or swine.
RESUMEN
OBJECTIVES: The development of bio-three-dimensional (bio-3D) printers has led to significant advances in regenerative medicine. Three-dimensional constructs, including spheroids, are maintained by extracellular matrix proteins secreted by cells so that the cells can be cultured in conditions closer to the physiological environment. This study aimed to create a useful 3D construct as a model of the dentin-pulp complex. METHODS: We examined the expression patterns of extracellular matrix proteins and cell proliferation areas in a 3D construct created using O9-1 cells derived from cranial neural crest cells of mice. The 3D construct was created by sticking the spheroid cultures onto a needle array using a bio-3D printer. RESULTS: Cell proliferation areas along with characteristic expression of tenascin C and DMP1 were evaluated. The expression of tenascin C and DMP1 was significantly enhanced in the spheroids compared to that in two-dimensional cultures. Moreover, cell proliferation regions and tenascin C expression were confirmed in the outer layer of spheroids in the embryonic stem cell medium, with insignificant DMP1 expression being observed. Interestingly, in a 3D construct cultured in calcification-induction medium, DMP1 expression was promoted, and DMP1-positive cells existed in the outermost layer without overlapping with tenascin C expression. CONCLUSIONS: The extracellular matrix proteins, tenascin C and DMP1, were expressed in a polarized manner in spheroids and 3D constructs, similar to the findings in the dental papilla. Therefore, these 3D constructs show potential as artificial models for studying odontogenesis.
Asunto(s)
Proliferación Celular , Proteínas de la Matriz Extracelular , Cresta Neural , Impresión Tridimensional , Tenascina , Cresta Neural/citología , Cresta Neural/metabolismo , Animales , Ratones , Tenascina/metabolismo , Proteínas de la Matriz Extracelular/metabolismo , Línea Celular , Esferoides Celulares/citología , Esferoides Celulares/metabolismo , Ingeniería de Tejidos/métodosRESUMEN
BACKGROUND: In javelin, although many previous studies have examined throwing movements that can increase initial velocity, the characteristics of throwing arm movement an elongated implement have not been clarified. The purpose of the present study was to examine the characteristics of the throwing movement of an elongated implement by comparing throwing movement between a javelin and baseball. METHODS: Twelve male javelin throwers were asked to perform a javelin throw (JT) and a baseball long toss (LT) twice. The three-dimensional coordinates of reflective markers attached to the athlete's body, javelin, and baseball were measured using an optical motion capture system. %Trajectory was used as an index to evaluate the degree to which the hand was moved linearly during the throw. A smaller value of this indicator meant that the hand was move closer to a straight line. The joint angles in the throwing arm were obtained by calculating the Euler angles between body segments. These data were used to compare JT and LT. RESULTS: %Trajectory showed that JT was significantly smaller than LT. Significant differences in the joint angles of the throwing arm were noted between JT and LT. CONCLUSIONS: JT showed a kinematic pattern in which the hand was moved more linearly than in baseball long toss.
Asunto(s)
Brazo , Béisbol , Movimiento , Humanos , Masculino , Béisbol/fisiología , Fenómenos Biomecánicos , Movimiento/fisiología , Brazo/fisiología , Adulto Joven , AdultoRESUMEN
Introduction & objectives: Stem cell therapy for regenerative medicine has been sincerely investigated, but not still popular although some clinical trials show hopeful results. This therapy is suggested to be a representative candidate such as bone defect due to the accident, iatrogenic resection oncological tumor, congenital disease, and severe periodontitis in oral region. Recently, the Bio-3D printer "Regenova®" has been introduced as an innovative three-dimensional culture system, equipped scaffold-free bio-assembling techniques without any biomaterials. Therefore, we expected a mount of bone defect could be repaired by the structure established from this Bio-3D printer using osteogenic potential stem cells. Material & methods: The gingival tissue (1x1 mm) was removed from the distal part of the lower wisdom tooth of the patients who agreed our study. Human Gingival Mesenchymal Stem Cells (hGMSCs) were isolated from this tissue and cultured, since we confirmed the characteristics such as facile isolation and accelerated proliferation, further, strong potential of osteogenic-differentiation. Spheroids were formed using hGMSC in 96-well plates designed for low cell adhesion. The size of the spheroids was measured, and fluorescent immunostaining was employed to verify the expression of stem cell and apoptosis marker, and extracellular matrix. Following four weeks of bone differentiation, µCT imaging was performed. Calcification was confirmed by alizarin red and von Kossa staining. Fluorescent immunostaining was utilized to assess the expression of markers indicative of advanced bone differentiation. Results: We have established and confirmed the spheroids (â¼600 µm in diameter) constructed from human GMSCs (hGMSCs) still maintain stem cell potentials and osteogenic differentiation abilities from the results that CD73 and not CD34 were expressed as stem cell positive and negative marker, respectively. These spheroids were pilled up like cylindal shape to the "Kenzan" platform of Bio-3D printer and cultured for 7days. The cylindal structure originated from compound spheroids were tried to differentiate into bone four weeks with osteogenic induction medium. The calcification of bio-3D printed bone-like structures was confirmed by alizarin red and Von Kossa staining. In addition, µCT analysis revealed that the HU (Hounsfield Unit) of the calcified structures was almost identical to that of trabecular bone. Immunofluorescent staining detected osteocalcin expression, a late-stage bone differentiation marker. Conclusion: For the first time, we have achieved the construction of a scaffold-free, bone-like luminal structure through the assembly of spheroids comprised of this hGMSCs. This success is sure to be close to the induction of clinical application against regenerative medicine especially for bone defect disease.
RESUMEN
In javelin training, many athletes improve their throwing technique by throwing from a slower run-up velocity than in competitions. However, whether the acquisition of javelin velocity in throwing from a slower run-up velocity is the same as in full run-up throwing is unclear. The purpose of this study was to clarify the differences in the contribution of each movement to the javelin velocity caused by changes in the run-up velocity within an individual. Twelve collegiate male javelin throwers were included in this study. Athletes performed two types of throws: one-cross throwing (Cross) and full run-up throwing (Run). The coordinates of reflective markers attached to the thrower's body and the javelin were recorded using an optical motion capture system. The percentage contribution of each joint movement to the javelin velocity was calculated and compared between Cross and Run. Cross had a lower contribution of trunk forward lean to forward and upward javelin velocities compared to Run. On the other hand, Cross had a higher contribution of trunk counter-clockwise rotation to forward and upward javelin velocities than Run. These results suggest that as the velocity of run-up changes within an individual, the acquisition of javelin velocity also changes.
RESUMEN
A 65-year-old woman was referred to our hospital for lumbago. The patient was diagnosed with multiple myeloma in 2020. She underwent chemotherapy and radiation therapy, and the disease progression stabilized. In 2022, the patient presented with severe anemia(Hb 4.9 mg/dL), and upper gastrointestinal endoscopy revealed a type 1 tumor in the middle body of the stomach. Computed tomography showed masses in the stomach and pancreas. The patient required a large volume of blood transfusion and underwent total gastrectomy to control the bleeding. Histological examination of the resected specimen indicated infiltration of myeloma cells. The patient died from invasive lesions in other organs, a year after surgery. Usually, extramedullary multiple myeloma lesions occur in the liver, spleen, and lymph nodes. Gastric invasion of multiple myeloma is very rare. Because of poor prognosis, surgery for gastric invasion of multiple myeloma is even rarer. We report a case of gastric invasion of multiple myeloma with a literature review.
Asunto(s)
Mieloma Múltiple , Neoplasias Gástricas , Femenino , Humanos , Anciano , Mieloma Múltiple/cirugía , Neoplasias Gástricas/tratamiento farmacológico , Gastrectomía/métodos , Ganglios Linfáticos/patologíaRESUMEN
Morbidity and mortality rates associated with atherosclerosis-related diseases are increasing. Therefore, developing new research models is important in furthering our understanding of atherosclerosis and investigate novel treatments. Here, we designed novel vascular-like tubular tissues from multicellular spheroids composed of human aortic smooth muscle cells, endothelial cells, and fibroblasts using a bio-3D printer. We also evaluated their potential as a research model for Mönckeberg's medial calcific sclerosis. The tubular tissues were sufficiently strong to be handled 1 week after printing and could still be cultured for 3 weeks. Histological assessment showed that calcified areas appeared in the tubular tissues within 1 week after culture in a medium containing inorganic phosphate (Pi) or calcium chloride as the calcification-stimulating factors. Calcium deposition was confirmed using micro-computed tomography imaging. Real-time quantitative reverse transcription polymerase chain reaction analysis revealed that the expression of osteogenic transcription factors increased in calcified tubular tissues. Furthermore, the administration of Pi and rosuvastatin enhanced tissue calcification. The bio-3D printed vascular-like tubular structures, which are composed of human-derived cells, can serve as a novel research model for Mönckeberg's medial calcific sclerosis.
Asunto(s)
Aterosclerosis , Esclerosis Calcificante de la Media de Monckeberg , Calcificación Vascular , Humanos , Esclerosis Calcificante de la Media de Monckeberg/metabolismo , Células Endoteliales/metabolismo , Microtomografía por Rayos X , Calcificación Vascular/diagnóstico por imagenRESUMEN
Background: To date, there is no effective long-lasting treatment for cartilage tissue repair. Primary chondrocytes and mesenchymal stem/stromal cells are the most commonly used cell sources in regenerative medicine. However, both cell types have limitations, such as dedifferentiation, donor morbidity, and limited expansion. Here, we report a stepwise differentiation method to generate matrix-rich cartilage spheroids from induced pluripotent stem cell-derived mesenchymal stem/stromal cells (iMSCs) via the induction of neural crest cells under xeno-free conditions. Methods: The genes and signaling pathways regulating the chondrogenic susceptibility of iMSCs generated under different conditions were studied. Enhanced chondrogenic differentiation was achieved using a combination of growth factors and small-molecule inducers. Results: We demonstrated that the use of a thienoindazole derivative, TD-198946, synergistically improves chondrogenesis in iMSCs. The proposed strategy produced controlled-size spheroids and increased cartilage extracellular matrix production with no signs of dedifferentiation, fibrotic cartilage formation, or hypertrophy in vivo. Conclusion: These findings provide a novel cell source for stem cell-based cartilage repair. Furthermore, since chondrogenic spheroids have the potential to fuse within a few days, they can be used as building blocks for biofabrication of larger cartilage tissues using technologies such as the Kenzan Bioprinting method.
RESUMEN
BACKGROUND: Pole vaulting involves trunk flexion, extension, and rotation, which may place the lumbar spine under stress. Repeated pole vaulting may cause lumbar disc degeneration (DD) and lumbar spondylolysis (LS); however, this phenomenon is yet to be established. OBJECTIVE: This study aimed to determine the difference in the maximum joint angles of the shoulder, hip, and trunk during pole vaulting between male pole vaulters with and without lumbar DD or LS. METHODS: This retrospective study included 17 male pole vaulters. Four high-speed cameras were used to record the pole vaulters at 240 Hz. Radiography and magnetic resonance imaging were used to examine the lumbar spine in all athletes. Differences in the data between two sets of groups were analyzed using the unpaired t-test or the Mann-Whitney U test. RESULTS: There was a significant difference in the maximum joint angle of hip flexion between pole vaulters with and without lumbar DD (p= 0.03). CONCLUSION: Pole vaulters with lumbar DD may use lumbar flexion instead of hip flexion during the rock-back movement. Moreover, LS may occur due to repeated failed vaulting. Therefore, trunk stability and functional movements should be prioritized to prevent organic changes in the lower back.
Asunto(s)
Degeneración del Disco Intervertebral , Espondilólisis , Humanos , Masculino , Degeneración del Disco Intervertebral/diagnóstico por imagen , Estudios Retrospectivos , Vértebras Lumbares/diagnóstico por imagen , Espondilólisis/diagnóstico por imagen , Espondilólisis/patología , AtletasRESUMEN
Ureteral strictures, which can be caused by ureteral injury, radiation therapy, ureterolithiasis, urinary tract infections, and ureteral endometriosis, typically require ureteral reconstruction. Although tissue engineering, autologous alternative tissue transplantation, and surgical techniques applying various flaps have been carried out for ureteral regeneration, all with some success, each method has its advantages and disadvantages. As an alternative, we created the first artificial ureter structures using only live cells and grafted them into healthy rat ureters. Spheroids were created using normal human dermal fibroblasts and human umbilical vein endothelial cells and subsequently laminated using a bio-three-dimensional printer. After molding the laminated spheroids into tubular structures, the artificial ureters were transplanted into live rats. After 2-12 weeks, the animals were sacrificed and their gross and pathological features were examined. In the artificial ureteral lumen of rats with Grade 0-1 hydronephrosis, regeneration of the ureteral epithelium was observed, the thickness of which increased over the course of the experiment. Regeneration of the muscular layer was also observed, extending from the normal ureteral side toward the artificial ureter structure over time. However, complete regeneration was not observed at the end of 12 weeks. Although ureteral peristalsis was noted in all cases, it was weaker than expected. Therefore, we achieved short-segment ureteral regeneration using a cell-only structure. This finding suggests that by applying alternative strategies to this method, such as changing the cell type and composition, regeneration over the entire length of the ureter may be possible in the future. STATEMENT OF SIGNIFICANCE: Until now, ureteral regeneration techniques have been dominated by the use of high-molecular-weight compounds and autologous tissues, and there have been no reports of regeneration using structures made entirely of cells. This is the first report of ureteral regeneration using a tubular structure made from stacked spheroids. Although this study only attained short-segment ureteral regeneration, regeneration of the ureter over a much longer proportion of its length can be achieved in the future by applying other strategies, such as changing the cell type. This study provides a foundation to achieve the future goal of complete regeneration.
Asunto(s)
Uréter , Obstrucción Ureteral , Humanos , Femenino , Ratas , Animales , Células Endoteliales/patología , Obstrucción Ureteral/patología , Obstrucción Ureteral/cirugía , Ingeniería de Tejidos/métodos , Impresión TridimensionalRESUMEN
Autologous nerve grafting is the gold standard method for peripheral nerve injury with defects. Artificial nerve conduits have been developed to prevent morbidity at the harvest site. However, the artificial conduit regeneration capacity is not sufficient. A Bio 3D printer is technology that creates three-dimensional tissue using only cells. Using this technology, a three-dimensional nerve conduit (Bio 3D nerve conduit) was created from several cell spheroids. We reported the first application of the Bio 3D nerve conduit for peripheral nerve injury. A Bio 3D nerve conduit that was created from several cells promotes peripheral nerve regeneration. The Bio 3D nerve conduit may be useful clinically to treat peripheral nerve defects.
Asunto(s)
Traumatismos de los Nervios Periféricos , Humanos , Traumatismos de los Nervios Periféricos/cirugía , Regeneración Nerviosa/fisiología , Nervios Periféricos/cirugía , Prótesis e Implantes , Autoinjertos , Andamios del TejidoRESUMEN
BACKGROUND: Although autogenous bone implantation is considered to be the gold standard for the reconstruction of bone defects, this approach remains challenging when treating extensive bone defects (EBDs). Therefore, artificial materials (AMs) such as artificial bone and scaffolds are often used for treating EBDs. Nevertheless, complications such as material failure, foreign body reaction, and infection are common. To overcome these issues, we aimed to develop a new treatment for an EBD using scaffold-free adipose-derived stromal cells (ADSCs) to fabricate chondrogenic/osteogenic-induced constructs without AMs. METHODS: ADSCs were obtained from the subcutaneous adipose tissue of 8-week-old female Wistar rats (n = 3) and assessed to determine their potential for multilineage differentiation into adipocytes (Oil Red O staining), chondrocytes (hematoxylin and eosin, Alcian blue, and Safranin O staining), and osteoblasts (Alizarin red and von Kossa staining). Spheroids (n = 320), each containing 3.0 × 104 ADSCs, were then used to fabricate scaffold-free cell constructs using a bio-3D printer with a needle array. The spheroids and constructs were stimulated with induction medium to induce chondrogenic and osteogenic differentiation. The induced cartilage- and bone-like constructs were finally evaluated using micro-computed tomography (µCT) and histological analysis. RESULTS: The collected ADSCs were capable of trilineage differentiation, and were successfully used to produce scaffold-free constructs. The fabricated constructs (n = 3) exhibited equivalent strength (load, 195.3 ± 6.1 mN; strength, 39.1 ± 1.2 kPa; and stiffness, 0.09 ± 0.01 N/mm) to that of soft tissues such as the muscles in the uninduced condition. In chondrogenic induction experiments, Alcian blue and Safranin O staining confirmed the differentiation of the constructs into cartilage, and cartilage tissue-like structures were produced. In the osteogenic induction experiment, Alizarin Red and von Kossa staining showed calcium salt deposition, and µCT images confirmed the same calcification level as that of the cortical bone. CONCLUSIONS: Scaffold-free constructs consisting of ADSCs without an AM were fabricated, and cartilage- and bone-like tissues were successfully generated, demonstrating their potential for bone reconstruction.
Asunto(s)
Osteogénesis , Ingeniería de Tejidos , Tejido Adiposo , Animales , Diferenciación Celular , Células Cultivadas , Femenino , Osteogénesis/fisiología , Impresión Tridimensional , Ratas , Ratas Wistar , Células del Estroma , Ingeniería de Tejidos/métodos , Andamios del Tejido , Microtomografía por Rayos XRESUMEN
INTRODUCTION: Differentiation of hepatocytes and culture methods have been investigated in dogs as a tool to establish liver transplant and drug metabolism examination systems. However, mass culture techniques for canine hepatocytes (cHep) have not been investigated, and it is necessary to construct a suitable culture system. Recently, a protocol called Bud production has attracted attention, and a mixed culture of human and mouse hepatocytes, stem cells, and artificial blood vessels significantly improved the size and formation ratio of spheroids. The purpose of this study was to investigate and improve the in vitro culture of cHep by mixing canine adipose-derived mesenchymal stem cells (cASCs) and human umbilical vein endothelial cells (HUVECs). METHODS: Spheroid formation ratio and histological examination were evaluated among four culture methods, including cHep alone, two-mix (cHep + cASCs and cHep + HUVEC), and three-mix (cHep + HUVEC + cASCs), on days 0, 4, and 7. Expression levels of liver-related genes (ALB, AFP, α1-AT, CDH1, CYP2E1, CYP3A12, and TAT) were evaluated by quantitative real-time polymerase chain reaction (RT-PCR). Protein expression of albumin, vimentin, and von Willebrand Factor (vWF) was investigated to confirm the location of the hepatocytes. RESULTS: The ratio of spheroid formation was 60.2% in the three-mix culture and was significantly improved compared with cHep alone (5.9%) and two-mix; cHep + cASCs (36.2%) and cHep + HUVEC (26.4%) (P < 0.001). Histological evaluation revealed that the three-mix spheroids formed large canine hepatocyte spheroids (LcHS), and hepatocytes were distributed in the center of the spheroids. Quantitative gene expression analysis of LcHS showed that liver-related genes expression were maintained the same levels with that of a culture of cHep alone from days 4-7. CONCLUSION: These results revealed that the three-mix culture method using cHep, HUVECs, and cASCs was capable of promoting LcHS without impairing liver function in cHep, suggesting that LcHS could be used for the application of high-volume culture techniques in dogs.
RESUMEN
BACKGROUND: Medical interventions for subchondral bone cysts in horses have been extensively studied. This study investigated the regeneration of articular cartilage and subchondral bone with scaffold-free three-dimensional (3D) constructs of equine synovial membrane-derived mesenchymal stem cells (SM-MSCs) isolated from three ponies and expanded until over 1.0 × 107 cells at passage 2 (P2). RESULTS: SM-MSCs were strongly positive for CD11a/CD18, CD44, and major histocompatibility complex (MHC) class I; moderately positive for CD90, CD105, and MHC class II; and negative for CD34 and CD45 on flow cytometry and differentiated into osteogenic, chondrogenic, and adipogenic lineages in the tri-lineage differentiation assay. After culturing SM-MSCs until P3, we prepared a construct (diameter, 6.3 mm; height, 5.0 mm) comprising approximately 1920 spheroids containing 3.0 × 104 cells each. This construct was confirmed to be positive for type I collagen and negative for type II collagen, Alcian blue, and Safranin-O upon histological analysis and was subsequently implanted into an osteochondral defect (diameter, 6.8 mm; depth, 5.0 mm) at the right femoral medial condyle. The contralateral (left femoral) defect served as the control. At 3 and 6 months after surgery, the radiolucent volume (RV, mm3) of the defects was calculated based on multiplanar reconstruction of computed tomography (CT) images. Magnetic resonance (MR) images were evaluated using a modified two-dimensional MR observation of cartilage repair tissue (MOCART) grading system, while macroscopic (gross) and microscopic histological characteristics were scored according to the International Cartilage Repair Society (ICRS) scale. Compared to the control sites, the implanted defects showed lower RV percentages, better total MOCART scores, higher average gross scores, and higher average histological scores. CONCLUSIONS: Implantation of a scaffold-free 3D-construct of SM-MSCs into an osteochondral defect could regenerate the original structure of the cartilage and subchondral bone over 6 months post-surgery in horses, indicating the potential of this technique in treating equine subchondral bone cysts.
Asunto(s)
Quistes Óseos , Cartílago Articular , Enfermedades de los Caballos , Células Madre Mesenquimatosas , Regeneración , Animales , Quistes Óseos/veterinaria , Fémur , Caballos , Membrana Sinovial/citología , Andamios del TejidoRESUMEN
OBJECTIVES: Cell therapies, such as stem cell suspension injection, are used to treat bronchopleural fistula. Although it is safe and effective, injected cells cannot remain within the bronchioles of the fistula due to cell leakage into the thoracic cavity. Here, we inserted a 'bio plug' into the fistula, produced using cells and a bio-3D printer, to examine the effectiveness of bio plugs for the closure of bronchopleural fistulas, the optimal cell source and the closure mechanism. METHODS: Bio plugs were made with mesenchymal stem (stromal) cells derived from bone marrow (MSCBM), fibroblasts and rat lung micro-vessel endothelial cells using a bio-3D printer with different cell mixing ratios. Six groups, according to the presence or absence and the type of bio plugs, were compared. The plugs were inserted into the bronchi of F344 rats. The obstruction ratio and histological and immunohistochemical findings were evaluated. RESULTS: MSCBM+ rat lung micro-vessel endothelial cell group exhibited a higher obstruction ratio among all groups excluding the MSCBM group (P = 0.039). This group had fibrosis and CD31-positive cells and fewer CD68-positive cells than MSCBM and MSCBM+ fibroblast groups. CONCLUSIONS: Bio plugs with mixed cells, including stem cells, contribute to bronchial closure in the current experimental setting. Endothelial cells effectively maintain the structure in this model. Although bronchial closure for bronchopleural fistula could not be described as clinical conditions were not reproduced, we collected essential data on bronchial closure; however, further experiments are warranted.
Asunto(s)
Fístula Bronquial , Enfermedades Pleurales , Animales , Fístula Bronquial/etiología , Fístula Bronquial/cirugía , Células Endoteliales , Humanos , Enfermedades Pleurales/cirugía , Neumonectomía/efectos adversos , Ratas , Ratas Endogámicas F344RESUMEN
Osteoarthritis is a leading cause of pain and joint immobility, the incidence of which is increasing worldwide. Currently, total joint replacement is the only treatment for end-stage disease. Scaffold-based tissue engineering is a promising alternative approach for joint repair but is subject to limitations such as poor cytocompatibility and degradation-associated toxicity. To overcome these limitations, a completely scaffold-free Kenzan method for bio-3D printing was used to fabricate cartilage constructs feasible for repairing large chondral defects. Human induced pluripotent stem cell (iPSC)-derived neural crest cells with high potential to undergo chondrogenesis through mesenchymal stem cell differentiation were used to fabricate the cartilage. Unified, self-sufficient, and functional cartilaginous constructs up to 6 cm2in size were assembled by optimizing fabrication time during chondrogenic induction. Maturation for 3 weeks facilitated the self-organisation of the cells, which improved the construct's mechanical strength (compressive and tensile properties) and induced changes in glycosaminoglycan and type II collagen expression, resulting in improved tissue function. The compressive modulus of the construct reached the native cartilage range of 0.88 MPa in the 5th week of maturation. This paper reports the fabrication of anatomically sized and shaped cartilage constructs, achieved by combining novel iPSCs and bio-3D printers using a Kenzan needle array technology, which may facilitate chondral resurfacing of articular cartilage defects.
Asunto(s)
Cartílago Articular , Células Madre Pluripotentes Inducidas , Diferenciación Celular , Condrocitos , Condrogénesis , Humanos , Impresión Tridimensional , Regeneración , Ingeniería de Tejidos , Andamios del TejidoRESUMEN
The fabrication of three-dimensional (3D) cardiac tissue using human induced pluripotent stem cell-derived cardiomyocytes (iPSC-CMs) is useful not only for regenerative medicine, but also for drug discovery. Here, we report a bio-3D printer that can fabricate tubular cardiac constructs using only human iPSC-CMs. Protocols to evaluate the contractile force and response to electrical stimulation in the cardiac constructs are described. We confirmed that the constructs can be applied for transplantation or drug response testing. In the near future, we expect that the constructs will be used as alternatives for heart transplantation and in animal experiments for new drug development.
Asunto(s)
Miocitos Cardíacos/citología , Ingeniería de Tejidos/métodos , Células Cultivadas , Trasplante de Corazón , Células Endoteliales de la Vena Umbilical Humana , Humanos , Células Madre Pluripotentes Inducidas/citología , Impresión Tridimensional , Medicina Regenerativa/métodos , Andamios del TejidoRESUMEN
The safety and therapeutic efficacy of new drugs are tested in experimental animals. However, besides being a laborious, costly process, differences in drug responses between humans and other animals and potential cardiac adverse effects lead to the discontinued development of new drugs. Thus, alternative approaches to animal tests are needed. Cardiotoxicity and responses of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs) to drugs are conventionally evaluated by cell seeding and two-dimensional (2D) culture, which allows measurements of field potential duration and the action potentials of CMs using multielectrode arrays. However, 2D-cultured hiPSC-CMs lack 3D spatial adhesion, and have fewer intercellular and extracellular matrix interactions, as well as different contractile behavior from CMsin vivo. This issue has been addressed using tissue engineering to fabricate three-dimensional (3D) cardiac constructs from hiPSC-CMs culturedin vitro. Tissue engineering can be categorized as scaffold-based and scaffold-free. In scaffold-based tissue engineering, collagen and fibrin gel scaffolds comprise a 3D culture environment in which seeded cells exhibit cardiac-specific functions and drug responses, whereas 3D cardiac constructs fabricated by tissue engineering without a scaffold have high cell density and form intercellular interactions. This review summarizes the characteristics of scaffold-based and scaffold-free cardiac tissue engineering and discusses the applications of fabricated cardiac constructs to drug screening.
Asunto(s)
Miocitos Cardíacos , Animales , Matriz Extracelular , Corazón , Humanos , Células Madre Pluripotentes Inducidas , Preparaciones Farmacéuticas , Ingeniería de TejidosRESUMEN
Previously, we developed a Bio3D conduit fabricated from human fibroblasts and reported a significantly better outcome compared with artificial nerve conduit in the treatment of rat sciatic nerve defect. The purpose of this study is to investigate the long-term safety and nerve regeneration of Bio3D conduit compared with treatments using artificial nerve conduit and autologous nerve transplantation.We used 15 immunodeficient rats and randomly divided them into three groups treated with Bio3D (n = 5) conduit, silicon tube (n = 5), and autologous nerve transplantation (n = 5). We developed Bio3D conduits composed of human fibroblasts and bridged the 5 mm nerve gap created in the rat sciatic nerve. The same procedures were performed to bridge the 5 mm gap with a silicon tube. In the autologous nerve group, we removed the 5 mm sciatic nerve segment and transplanted it. We evaluated the nerve regeneration 24 weeks after surgery.Toe dragging was significantly better in the Bio3D group (0.20 ± 0.28) than in the silicon group (0.6 ± 0.24). The wet muscle weight ratios of the tibial anterior muscle of the Bio3D group (79.85% ± 5.47%) and the autologous nerve group (81.74% ± 2.83%) were significantly higher than that of the silicon group (66.99% ± 3.51%). The number of myelinated axons and mean myelinated axon diameter was significantly higher in the Bio3D group (14708 ± 302 and 5.52 ± 0.44 µm) and the autologous nerve group (14927 ± 5089 and 6.04 ± 0.85 µm) than the silicon group (7429 ± 1465 and 4.36 ± 0.21 µm). No tumors were observed in any of the rats in the Bio3D group at 24 weeks after surgery.The Bio3D group showed significantly better nerve regeneration and there was no significant difference between the Bio3D group and the nerve autograft group in all endpoints.