Exploring the Effect of Resins of Different Origin on the Structure, Dynamics and Curing Characteristics of SBR Compounds.

The replacement of synthetic and petroleum-based ingredients with greener alternatives of natural origin is an imperative issue in rubber technology for the tire industry. In this study, a glycerin-esterified maleated rosin resin, derived from natural resources, is examined as a potential tackifier in styrene-butadiene rubber (SBR) formulations. A comparison is made with two synthetic resins commonly used as tackifiers in tire manufacturing: a petroleum-derived aromatic resin and a phenolic resin. Specifically, this research investigates how these resins affect the structure, dynamics, and curing characteristics of SBR compounds, which are strictly related to the mechanical and technological properties of the final products. Moving die rheometer and equilibrium swelling experiments are employed to analyze vulcanization kinetics and crosslink density, which are differently influenced by the different resins. Information on the polymer-resin compatibility is gained by differential scanning calorimetry and dynamo-mechanical analysis, while solid-state NMR methods offer insights into the structure and dynamics of both cured and uncured SBR compounds at the molecular level. Overall, our analysis shows that the resin of vegetal origin has a comparable impact on the SBR compound to that observed for the synthetic resins and could be further tested for industrial applications.

Ionic Liquids as Working Fluids for Heat Storage Applications: Decomposition Behavior of N-Butyl-N-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate.

Ionic liquids (ILs) represent promising working fluids to be used in thermal energy storage (TES) technologies thanks to their peculiar properties, such as low volatility, high chemical stability, and high heat capacity. Here, we studied the thermal stability of the IL N-butyl-N-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate ([BmPyrr]FAP), a potential working fluid for TES applications. The IL was heated at 200 °C for up to 168 h either in the absence or in contact with steel, copper, and brass plates to simulate the conditions used in TES plants. High-resolution magic angle spinning nuclear magnetic resonance spectroscopy was found to be useful for the identification of the degradation products of both the cation and the anion, thanks to the acquisition of 1H, 13C, 31P, and 19F-based experiments. In addition, elemental analysis was performed on the thermally degraded samples by inductively coupled plasma optical emission spectroscopy and energy dispersive X-ray spectroscopy. Our analysis shows a significant degradation of the FAP anion upon heating for more than 4 h, even in the absence of the metal/alloy plates; on the other hand, the [BmPyrr] cation displays a remarkable stability also when heated in contact with steel and brass.

Structural insights on the selective interaction of the histidine-rich piscidin antimicrobial peptide Of-Pis1 with membranes.

Of-Pis1 is a potent piscidin antimicrobial peptide (AMP), recently isolated from rock bream (Oplegnathus fasciatus). This rich in histidines and glycines 24-amino acid peptide displays high and broad antimicrobial activity and no significant hemolytic toxicity against human erythrocytes, suggesting low toxicity. To better understand the mechanism of action of Of-Pis1 and its potential selectivity, using NMR and CD spectroscopies, we studied the interaction with eukaryotic and procaryotic membranes and membrane models. Anionic sodium dodecyl sulfate (SDS) and lipopolysaccharide (LPS) micelles were used to mimic procaryotic membranes, while zwitterionic dodecyl phosphocholine (DPC) was used as eukaryotic membrane surrogate. In an aqueous environment, Of-Pis1 adopts a flexible random coil conformation. In DPC and SDS instead, the N-terminal region of Of-Pis1 forms an amphipathic α-helix with the non-polar face in close contact with the micelles. Slower solvent exchange and higher pKas of the histidine residues in SDS than in DPC suggest that Of-Pis1 interacts more tightly with SDS. Of-Pis1 also binds tightly and structurally perturbs LPS micelles. Of-Pis1 interacts with both Escherichia coli and mammalian cell membranes, but only in the presence of Escherichia coli membranes it populates the helical conformation. Furthermore, ligand-based NMR experiments support a tighter and more specific interaction with bacterial than with eukaryotic membranes. Overall, these data clearly show the selective interaction of this broadly active AMP with bacterial over eukaryotic membranes. The conformational information is discussed in terms of Of-Pis1 amino acid sequence and composition to provide insights useful to design more potent and selective AMPs.

Influence of Sulfur-Curing Conditions on the Dynamics and Crosslinking of Rubber Networks: A Time-Domain NMR Study.

The characterization of the structural and dynamic properties of rubber networks is of fundamental importance in rubber science and technology to design materials with optimized mechanical properties. In this work, natural and isoprene rubber networks obtained by curing at three different temperatures (140, 150, and 170 °C) and three different sulfur contents (1, 2, and 3 phr) in the presence of a 3 phr accelerator were studied using a combination of low-field time-domain NMR (TD-NMR) techniques, including 1H multiple-quantum experiments for the measurement of residual dipolar couplings (Dres), the application of the Carr-Purcell-Meiboom-Gill pulse sequence for the measurement of the transverse magnetization decay and the extraction of 1H T2 relaxation times, and the use of field cycling NMR relaxometry for the determination of T1 relaxation times. The microscopic properties determined by TD-NMR experiments were discussed in comparison with the macroscopic properties obtained using equilibrium swelling, moving die rheometer, and calorimetric techniques. The obtained correlations between NMR observables, crosslink density values, maximum torque values, and glass transition temperatures provided insights into the effects of the vulcanization temperature and accelerator/sulfur ratio on the structure of the polymer networks, as well as on the effects of crosslinking on the segmental dynamics of elastomers. Dres and T2 were found to show linear correlations with the crosslink density determined by equilibrium swelling, while T1 depends on the local dynamics of polymer segments related to the glass transition, which is also affected by chemical modifications of the polymer chains occurring during vulcanization.

The stability of paintings and the molecular structure of the oil paint polymeric network.

A molecular-level understanding of the structure of the polymeric network formed upon the curing of air-drying artists' oil paints still represents a challenge. In this study we used a set of analytical methodologies classically employed for the characterisation of a paint film-based on infrared spectroscopy and mass spectrometry-in combination with solid state NMR (SSNMR), to characterise model paint layers which present different behaviours towards surface cleaning with water, a commonly applied procedure in art conservation. The study demonstrates, with the fundamental contribution of SSNMR, a relationship between the painting stability and the chemical structure of the polymeric network. In particular, it is demonstrated for the first time that a low degree of cross-linking in combination with a high degree of oxidation of the polymeric network render the oil paint layer sensitive to water.

Glassy and Polymer Dynamics of Elastomers by 1H-Field-Cycling NMR Relaxometry: Effects of Fillers.

1H spin-lattice relaxation rate (R1) dispersions were acquired by field-cycling (FC) NMR relaxometry between 0.01 and 35 MHz over a wide temperature range on polyisoprene rubber (IR), either unfilled or filled with different amounts of carbon black, silica, or a combination of both, and sulfur cured. By exploiting the frequency-temperature superposition principle and constructing master curves for the total FC NMR susceptibility, χ″(ω) = ωR1(ω), the correlation times for glassy dynamics, τs, were determined. Moreover, the contribution of polymer dynamics, χpol″(ω), to χ″(ω) was singled out by subtracting the contribution of glassy dynamics, χglass″(ω), well represented by the Cole-Davidson spectral density. Glassy dynamics resulted moderately modified by the presence of fillers, τs values determined for the filled rubbers being slightly different from those of the unfilled one. Polymer dynamics was affected by the presence of fillers in the Rouse regime. A change in the frequency dependence of χpol″(ω) at low frequencies was observed for all filled rubbers, more pronounced for those reinforced with silica, which suggests that the presence of the filler particles can affect chain conformations, resulting in a different Rouse mode distribution, and/or interchain interactions modulated by translational motions.

Glassy and Polymer Dynamics of Elastomers by 1H Field-Cycling NMR Relaxometry: Effects of Cross-Linking.

1H spin lattice relaxation rate (R 1) dispersions were acquired by field-cycling (FC) NMR relaxometry between 0.01 and 35 MHz over a wide temperature range on polyisoprene (IR), polybutadiene (BR), and poly(styrene-co-butadiene) (SBR) rubbers, obtained by vulcanization under different conditions, and on the corresponding uncured elastomers. By exploiting the frequency-temperature superposition principle, χ″(ωτs) master curves were constructed by shifting the total FC NMR susceptibility, χ″(ω) = ωR 1(ω), curves along the frequency axis by the correlation times for glassy dynamics, τs. Longer τs values and, correspondingly, higher glass transition temperatures were determined for the sulfur-cured elastomers with respect to the uncured ones, which increased by increasing the cross-link density, whereas no significant changes were found for fragility. The contribution of polymer dynamics, χ pol ″(ω), to χ″(ω) was singled out by subtracting the contribution of glassy dynamics, χ glass ″(ω), well represented using a Cole-Davidson spectral density. For all elastomers, χ pol ″(ω) was found to represent a small fraction, on the order of 0.05-0.14, of the total χ″(ω), which did not show a significant dependence on cross-link density. In the investigated temperature and frequency ranges, polymer dynamics was found to encompass regimes I (Rouse dynamics) and II (constrained Rouse dynamics) of the tube reptation model for the uncured elastomers and only regime I for the vulcanized ones. This is clear evidence that chemical cross-links impose constraints on chain dynamics on a larger space and time scale than free Rouse modes.

A stapled chromogranin A-derived peptide is a potent dual ligand for integrins αvß6 and αvß8.

Combining 2D STD-NMR, computation, biochemical assays and click-chemistry, we have identified a chromogranin-A derived compound (5) that has high affinity and bi-selectivity for αvß6 and αvß8 integrins and is stable in microsomal preparations. 5 is suitable for nanoparticle functionalization and delivery to cancer cells, holding promise for diagnostic and/or therapeutic applications.

Succinimide-Based Conjugates Improve IsoDGR Cyclopeptide Affinity to αvß3 without Promoting Integrin Allosteric Activation.

The isoDGR sequence is an integrin-binding motif that has been successfully employed as a tumor-vasculature-homing molecule or for the targeted delivery of drugs and diagnostic agents to tumors. In this context, we previously demonstrated that cyclopeptide 2, the product of the conjugation of c(CGisoDGRG) (1) to 4-( N-maleimidomethyl)cyclohexane-1-carboxamide, can be successfully used as a tumor-homing ligand for nanodrug delivery to neoplastic tissues. Here, combining NMR, computational, and biochemical methods, we show that the succinimide ring contained in 2 contributes to stabilizing interactions with αvß3, an integrin overexpressed in the tumor vasculature. Furthermore, we demonstrate that various cyclopeptides containing the isoDGR sequence embedded in different molecular scaffolds do not induce αvß3 allosteric activation and work as pure integrin antagonists. These results could be profitably exploited for the rational design of novel isoDGR-based ligands and tumor-targeting molecules with improved αvß3-binding properties and devoid of adverse integrin-activating effects.

Cyclodextrins as inhibitors of the precipitation of riboflavin-5'-phosphate due to presence of zinc chloride: A NMR investigation.

Several cyclodextrins (CDs) were probed in order to counteract the precipitation of riboflavin-5'-phosphate (or flavin mononucleotide, FMN-P) due to the presence of divalent cations, by exploiting Nuclear Magnetic Resonance (NMR) spectroscopy both for quantitative analyses and stereochemical characterizations. Among CDs, ß-cyclodextrin (ß-CD) showed the best solubilizing power in virtue of the formation of a 1-2 FMN-P/ß-CD complex, the stereochemistry of which was ascertained by ROESY (Rotating-frame Overhauser Enhanced SpectroscopY) measurements.

Integrating a prospective pilot trial and patient-derived xenografts to trace metabolic changes associated with acute myeloid leukemia.

Despite the considerable progress in understanding the molecular bases of acute myeloid leukemia (AML), new tools to link disease biology to the unpredictable patient clinical course are still needed. Herein, high-throughput metabolomics, combined with the other "-omics" disciplines, holds promise in identifying disease-specific and clinically relevant features.In this study, we took advantage of nuclear magnetic resonance (NMR) to trace AML-associated metabolic trajectory employing two complementary strategies. On the one hand, we performed a prospective observational clinical trial to identify metabolic changes associated with blast clearance during the first two cycles of intensive chemotherapy in nine adult patients. On the other hand, to reduce the intrinsic variability associated with human samples and AML genetic heterogeneity, we analyzed the metabolic changes in the plasma of immunocompromised mice upon engraftment of primary human AML blasts.Combining the two longitudinal approaches, we narrowed our screen to seven common metabolites, for which we observed a mirror-like trajectory in mice and humans, tracing AML progression and remission, respectively. We interpreted this set of metabolites as a dynamic fingerprint of AML evolution.Overall, these NMR-based metabolomic data, to be consolidated in larger cohorts and integrated in more comprehensive system biology approaches, hold promise for providing valuable and non-redundant information on the systemic effects of leukemia.