RESUMEN
Young female athletes participating in sports requiring rapid changes of direction are at heightened risk of suffering traumatic knee injury, especially noncontact rupture of the anterior cruciate ligament (ACL). Clinical studies have revealed that geometric features of the tibiofemoral joint are associated with increased risk of suffering noncontact ACL injury. However, the relationship between three-dimensional (3D) tibiofemoral geometry and knee mechanics in young female athletes is not well understood. We developed a statistically augmented computational modeling workflow to determine relationships between 3D geometry of the knee and tibiofemoral kinematics and ACL force in response to an applied loading sequence of compression, valgus, and anterior force, which is known to load the ACL. This workflow included 3D characterization of tibiofemoral bony geometry via principal component analysis and multibody dynamics models incorporating subject-specific knee geometries. A combination of geometric features of both the tibia and the femur that spanned all three anatomical planes was related to increased ACL force and to increased kinematic coupling (i.e., anterior, medial, and distal tibial translations and internal tibial rotation) in response to the applied loads. In contrast, a uniplanar measure of tibiofemoral geometry that is associated with ACL injury risk, sagittal plane slope of the lateral tibial plateau subchondral bone, was not related to ACL force. Thus, our workflow may aid in developing mechanics-based ACL injury screening tools for young, active females based on a unique combination of bony geometric features that are related to increased ACL loading.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Humanos , Femenino , Lesiones del Ligamento Cruzado Anterior/complicaciones , Articulación de la Rodilla/fisiología , Ligamento Cruzado Anterior/fisiología , Tibia/fisiología , Atletas , Simulación por Computador , Fenómenos BiomecánicosRESUMEN
BACKGROUND: Little is known about the effect of modern hip arthroscopy on the natural history of femoroacetabular impingement syndrome (FAIS) with respect to joint preservation. PURPOSE: To (1) characterize the natural history of FAIS and (2) understand the effect of modern hip arthroscopy by radiographically comparing the hips of patients who underwent only unilateral primary hip arthroscopy with a minimum follow-up of 10 years. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: Between 2010 and 2012, 619 consecutive patients were reviewed from the practice of a single fellowship-trained hip arthroscopic surgeon. Inclusion criteria were FAIS, bilateral radiographic findings of femoroacetabular impingement, primary unilateral hip arthroscopy (labral repair, femoroplasty, or capsular closure), and minimum 10-year follow-up. The preoperative and minimum 10-year postoperative radiographs of patients were evaluated at each time point. Both operative and nonoperative hips were graded using the Tönnis classification or the presence of hip arthroplasty by 2 independent reviewers. Subgroup analyses were performed. RESULTS: A total of 200 hips from 100 patients were evaluated at a mean follow-up of 12.0 years. Preoperatively, 98% and 99% of operative and nonoperative hips were evaluated as Tönnis grades 0 and 1, respectively; 5% of nonoperative hips had worse Tönnis grades than operative hips. The nonoperative hip advanced to a worse Tönnis grade in 48% (48/100) of cases compared with 28% (28/100) among operative hips. At follow-up, Tönnis grades between hips were equal in 70% (70/100) of the cases, the operative hip had a better grade 25% (25/100) of the time, and the nonoperative hip had a better grade 5% (5/100) of the time. Modern hip arthroscopy was associated with a relative risk reduction of 42% in osteoarthritis progression. Impingement with borderline dysplasia, age, preoperative Tönnis grade, and alpha angle >65° were key risk factors in the radiographic progression of osteoarthritis. CONCLUSION: Although the majority of patients (70%) undergoing hip arthroscopy for FAIS did not experience differences between operative and nonoperative hips in terms of the radiographic progression of osteoarthritis, the natural history may be favorably altered for 25% of patients whose Tönnis grade was better after undergoing arthroscopic correction. Modern hip arthroscopy indications and techniques represent a valid joint-preservation procedure conferring a relative risk reduction of 42% in the progression of osteoarthritis. Arthroscopy for mixed patterns of impingement and instability were the fastest to degenerate.
Asunto(s)
Artroplastia de Reemplazo de Cadera , Pinzamiento Femoroacetabular , Osteoartritis , Humanos , Pinzamiento Femoroacetabular/diagnóstico por imagen , Pinzamiento Femoroacetabular/cirugía , Pinzamiento Femoroacetabular/complicaciones , Articulación de la Cadera/diagnóstico por imagen , Articulación de la Cadera/cirugía , Estudios de Seguimiento , Artroplastia de Reemplazo de Cadera/métodos , Artroscopía/métodos , Estudios de Cohortes , Resultado del Tratamiento , Osteoartritis/cirugía , Estudios RetrospectivosRESUMEN
BACKGROUND: Dissatisfaction after total knee arthroplasty (TKA) ranges from 15 to 30%. While patient selection may be partially responsible, morphological and reconstructive challenges may be determinants. Preoperative computed tomography (CT) scans for TKA planning allow us to evaluate the hip-knee-ankle axis and establish a baseline phenotypic distribution across anatomic parameters. The purpose of this cross-sectional analysis was to establish the distributions of 27 parameters in a pre-TKA cohort and perform threshold analysis to identify anatomic outliers. METHODS: There were 1,352 pre-TKA CTs that were processed. A 2-step deep learning pipeline of classification and segmentation models identified landmark images and then generated contour representations. We used an open-source computer vision library to compute measurements for 27 anatomic metrics along the hip-knee axis. Normative distribution plots were established, and thresholds for the 15th percentile at both extremes were calculated. Metrics falling outside the central 70th percentile were considered outlier indices. A threshold analysis of outlier indices against the proportion of the cohort was performed. RESULTS: Significant variation exists in pre-TKA anatomy across 27 normally distributed metrics. Threshold analysis revealed a sigmoid function with a critical point at 9 outlier indices, representing 31.2% of subjects as anatomic outliers. Metrics with the greatest variation related to deformity (tibiofemoral angle, medial proximal tibial angle, lateral distal femoral angle), bony size (tibial width, anteroposterior femoral size, femoral head size, medial femoral condyle size), intraoperative landmarks (posterior tibial slope, transepicondylar and posterior condylar axes), and neglected rotational considerations (acetabular and femoral version, femoral torsion). CONCLUSIONS: In the largest non-industry database of pre-TKA CTs using a fully automated 3-stage deep learning and computer vision-based pipeline, marked anatomic variation exists. In the pursuit of understanding the dissatisfaction rate after TKA, acknowledging that 31% of patients represent anatomic outliers may help us better achieve anatomically personalized TKA, with or without adjunctive technology.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Aprendizaje Profundo , Articulación de la Rodilla , Tomografía Computarizada por Rayos X , Humanos , Artroplastia de Reemplazo de Rodilla/métodos , Femenino , Masculino , Anciano , Persona de Mediana Edad , Estudios Transversales , Articulación de la Rodilla/diagnóstico por imagen , Articulación de la Rodilla/cirugía , Articulación de la Rodilla/anatomía & histología , Articulación de la Cadera/diagnóstico por imagen , Articulación de la Cadera/cirugía , Articulación de la Cadera/anatomía & histología , Articulación del Tobillo/diagnóstico por imagen , Articulación del Tobillo/cirugía , Articulación del Tobillo/anatomía & histología , Anciano de 80 o más AñosRESUMEN
PURPOSE: To (1) characterize the various forms of wearable sensor devices (WSDs) and (2) review the peer-reviewed literature of applied wearable technology within sports medicine. METHODS: A systematic search of PubMed and EMBASE databases, from inception through 2023, was conducted to identify eligible studies using WSDs within sports medicine. Data extraction was performed of study demographics and sensor specifications. Included studies were categorized by application: athletic training, rehabilitation, and research. RESULTS: In total, 43 studies met criteria for inclusion in this review. Forms of WSDs include pedometers, accelerometers, encoders (consisting of magnetometers and gyroscopes), force sensors, global positioning system trackers, and inertial measurement units. Outcome metrics include step counts; gait, limb motion, and angular positioning; foot and skin pressure; change of direction and inclination, including analysis of both body parts and athletes on a field; displacement and velocity of body segments and joints; heart rate; plethysmography; sport-specific kinematics; range of motion, symmetry, and alignment; head impact; sleep; throwing biomechanics; and kinetic and spatiotemporal running metrics. WSDs are used in athletic training to assess sport-specific biomechanics and workload with a goal of injury prevention and training optimization, as well as for rehabilitation monitoring and research such as for risk predicting and aiding diagnosis. CONCLUSIONS: WSDs enable real-time monitoring of human performance across a variety of implementations and settings, allowing collection of metrics otherwise not achievable. WSDs are powerful tools with multiple applications within athletic training, patient rehabilitation, and orthopaedic and sports medicine research. CLINICAL RELEVANCE: Wearable technology may represent the missing link to quantitatively addressing return to play and previous performance. WSDs are commercially available and portable adjuncts that allow clinicians, trainers, and individual athletes to monitor biomechanical parameters, workload, and recovery status to better contextualize personalized training, injury risk, and rehabilitation.
RESUMEN
BACKGROUND: The way in which force increases in the anterolateral tissues and the lateral extra-articular tenodesis (LET) tissue to resist internal rotation (IR) of the tibia after anterior cruciate ligament (ACL) reconstruction in isolation and after LET augmentation, respectively, is not well understood. PURPOSE: (1) To compare in a cadaveric model how force increases (ie, engages) in the anterolateral tissues with IR of the tibia after isolated ACL reconstruction and in the LET tissue after augmentation of the ACL reconstruction with LET and (2) to determine whether IR of the tibia is related to engagement of the LET tissue. STUDY DESIGN: Controlled laboratory study. METHODS: IR moments were applied to 9 human cadaveric knees at 0°, 30°, 60°, and 90° of flexion using a robotic manipulator. Each knee was tested in 2 states: (1) after isolated ACL reconstruction with intact anterolateral tissues and (2) after LET was performed using a modified Lemaire technique with the LET tissue fixed at 60° of flexion under 44 N of tension. Resultant forces carried by the anterolateral tissues and the LET tissue were determined via superposition. The way force increased in these tissues was characterized via parameters of tissue engagement, namely in situ slack, in situ stiffness, and tissue force at peak applied IR moment, and then compared (α < .05). IR was related to parameters of engagement of the LET tissue via simple linear regression (α < .05). RESULTS: The LET tissue exhibited less in situ slack than the anterolateral tissues at 30°, 60°, and 90° of flexion (P≤ .04) and greater in situ stiffness at 30° and 90° of flexion (P≤ .043). The LET tissue carried greater force at the peak applied IR moment at 0° and 30° of flexion (P≤ .01). IR was related to the in situ slack of the LET tissue (R2≥ 0.88; P≤ .0003). CONCLUSION: LET increased restraint to IR of the tibia compared with the anterolateral tissue, particularly at 30°, 60°, and 90° of flexion. IR of the tibia was positively associated with in situ slack of the LET tissue. CLINICAL RELEVANCE: Fixing the LET at 60° of flexion still provided IR restraint in the more functionally relevant flexion angle of 30°. Surgeons should pay close attention to the angle of internal and/or external tibial rotation when fixing the LET tissue intraoperatively because this surgical parameter is related to in situ slack of the LET tissue and, therefore, the amount of IR of the tibia.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Inestabilidad de la Articulación , Tenodesis , Humanos , Tenodesis/métodos , Lesiones del Ligamento Cruzado Anterior/cirugía , Fenómenos Biomecánicos , Cadáver , Inestabilidad de la Articulación/cirugía , Articulación de la Rodilla/cirugía , Rango del Movimiento ArticularRESUMEN
Background: Limited data exist regarding the association of tibiofemoral bony and soft tissue geometry and knee laxity with risk of first-time noncontact anterior cruciate ligament (ACL) rupture. Purpose: To determine associations of tibiofemoral geometry and anteroposterior (AP) knee laxity with risk of first-time noncontact ACL injury in high school and collegiate athletes. Study Design: Cohort study; Level of evidence, 2. Methods: Over a 4-year period, noncontact ACL injury events were identified as they occurred in 86 high school and collegiate athletes (59 female, 27 male). Sex- and age-matched control participants were selected from the same team. AP laxity of the uninjured knee was measured using a KT-2000 arthrometer. Magnetic resonance imaging was taken on ipsilateral and contralateral knees, and articular geometries were measured. Sex-specific general additive models were implemented to investigate associations between injury risk and 6 features: ACL volume, meniscus-bone wedge angle in the lateral compartment of the tibia, articular cartilage slope at the middle region of the lateral compartment of the tibia, femoral notch width at the anterior outlet, body weight, and AP displacement of the tibia relative to the femur. Importance scores (in percentages) were calculated to rank the relative contribution of each variable. Results: In the female cohort, the 2 features with the highest importance scores were tibial cartilage slope (8.6%) and notch width (8.1%). In the male cohort, the 2 top-ranked features were AP laxity (5.6%) and tibial cartilage slope (4.8%). In female patients, injury risk increased by 25.5% with lateral middle cartilage slope becoming more posteroinferior from -6.2° to -2.0° and by 17.5% with lateral meniscus-bone wedge angle increasing from 27.3° to 28.2°. In males, an increase in AP displacement from 12.5 to 14.4 mm in response to a 133-N anterior-directed load was associated with a 16.7% increase in risk. Conclusion: Of the 6 variables studied, there was no single dominant geometric or laxity risk factor for ACL injury in either the female or male cohort. In males, AP laxity >13 to 14 mm was associated with sharply increased risk of noncontact ACL injury. In females, lateral meniscus-bone wedge angle >28° was associated with a sharply decreased risk of noncontact ACL injury.
RESUMEN
BACKGROUND: Outcomes after isolated hip arthroscopic surgery for patients with dysplasia have been unfavorable. Results have included iatrogenic instability and conversion to total hip arthroplasty at a young age. However, patients with borderline dysplasia (BD) have shown more favorable results at short- and medium-term follow-up. PURPOSE: To assess long-term outcomes after hip arthroscopic surgery for femoroacetabular impingement in patients with BD (lateral center-edge angle [LCEA] = 18°-25°) compared with a control group of patients without dysplasia (LCEA = 26°-40°). STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: We identified a group of 33 patients (38 hips) with BD who were treated for FAI between March 2009 and July 2012. An age- and sex-matched control group of 83 patients (96 hips) was also identified. Patient-reported outcome scores were collected preoperatively and subsequently at a mean of 9.6 years postoperatively. RESULTS: The mean LCEA and Tönnis angle were 22.42°± 2.02° and 6.27°± 3.23° in the BD group, respectively, and 31.71°± 3.52° and 2.42°± 3.02° in the control group, respectively (P < .001). At a mean follow-up of 9.6 years (range, 8.2-11.6 years), there was a significant improvement in all patient-reported outcome scores in both groups (P < .001). There were no significant differences between preoperative and postoperative scores or rates of achieving the minimal clinically important difference between the BD and control groups. Bilateral surgery was noted to be a risk factor for any revision during the follow-up period (P < .001). There were 2 hips (5.3%) that underwent revision surgery in the BD group and 10 hips (10.4%) in the control group; of these, 1 patient in the BD group underwent total hip arthroplasty, and 1 patient who had undergone bilateral surgery in the control group underwent bilateral hip resurfacing. CONCLUSION: Durable outcomes (>9 years) with low revision rates can be expected after hip arthroscopic surgery with an approach that involves labral preservation where possible and careful attention to capsular closure in patients with BD. The observed outcomes were similar to those of a femoroacetabular impingement group with normal coverage. These results highlight the importance of classifying patients into impingement or instability categories and tailoring treatment appropriately with arthroscopic surgery or periacetabular osteotomy, respectively.
Asunto(s)
Pinzamiento Femoroacetabular , Luxación de la Cadera , Humanos , Pinzamiento Femoroacetabular/cirugía , Articulación de la Cadera/diagnóstico por imagen , Articulación de la Cadera/cirugía , Estudios de Cohortes , Luxación de la Cadera/cirugía , Resultado del Tratamiento , Artroscopía/métodos , Estudios Retrospectivos , Estudios de SeguimientoRESUMEN
BACKGROUND: Surgical management of complications following knee arthroplasty demands accurate and timely identification of implant manufacturer and model. Automated image processing using deep machine learning has been previously developed and internally validated; however, external validation is essential prior to scaling clinical implementation for generalizability. METHODS: We trained, validated, and externally tested a deep learning system to classify knee arthroplasty systems as one of the 9 models from 4 manufacturers derived from 4,724 original, retrospectively collected anteroposterior plain knee radiographs across 3 academic referral centers. From these radiographs, 3,568 were used for training, 412 for validation, and 744 for external testing. Augmentation was applied to the training set (n = 3,568,000) to increase model robustness. Performance was determined by the area under the receiver operating characteristic curve, sensitivity, specificity, and accuracy. Implant identification processing speed was calculated. The training and testing sets were drawn from statistically different populations of implants (P < .001). RESULTS: After 1,000 training epochs by the deep learning system, the system discriminated 9 implant models with a mean area under the receiver operating characteristic curve of 0.989, accuracy of 97.4%, sensitivity of 89.2%, and specificity of 99.0% in the external testing dataset of 744 anteroposterior radiographs. The software classified implants at a mean speed of 0.02 seconds per image. CONCLUSION: An artificial intelligence-based software for identifying knee arthroplasty implants demonstrated excellent internal and external validation. Although continued surveillance is necessary with implant library expansion, this software represents a responsible and meaningful clinical application of artificial intelligence with immediate potential to globally scale and assist in preoperative planning prior to revision knee arthroplasty.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Inteligencia Artificial , Humanos , Artroplastia de Reemplazo de Rodilla/métodos , Estudios Retrospectivos , Radiografía , Aprendizaje AutomáticoRESUMEN
High-grade knee laxity is associated with early anterior cruciate ligament (ACL) graft failure, poor function, and compromised clinical outcome. Yet, the specific ligaments and ligament properties driving knee laxity remain poorly understood. We described a Bayesian calibration methodology for predicting unknown ligament properties in a computational knee model. Then, we applied the method to estimate unknown ligament properties with uncertainty bounds using tibiofemoral kinematics and ACL force measurements from two cadaver knees that spanned a range of laxities; these knees were tested using a robotic manipulator. The unknown ligament properties were from the Bayesian set of plausible ligament properties, as specified by their posterior distribution. Finally, we developed a calibrated predictor of tibiofemoral kinematics and ACL force with their own uncertainty bounds. The calibrated predictor was developed by first collecting the posterior draws of the kinematics and ACL force that are induced by the posterior draws of the ligament properties and model parameters. Bayesian calibration identified unique ligament slack lengths for the two knee models and produced ACL force and kinematic predictions that were closer to the corresponding in vitro measurement than those from a standard optimization technique. This Bayesian framework quantifies uncertainty in both ligament properties and model outputs; an important step towards developing subject-specific computational models to improve treatment for ACL injury.
Asunto(s)
Lesiones del Ligamento Cruzado Anterior , Inestabilidad de la Articulación , Humanos , Ligamento Cruzado Anterior , Fenómenos Biomecánicos , Teorema de Bayes , Calibración , Incertidumbre , Tibia , Rango del Movimiento Articular , Articulación de la Rodilla , CadáverRESUMEN
Deep learning has the potential to be one of the most transformative technologies to impact orthopedic surgery. Substantial innovation in this area has occurred over the past 5 years, but clinically meaningful advancements remain limited by a disconnect between clinical and technical experts. That is, it is likely that few orthopedic surgeons possess both the clinical knowledge necessary to identify orthopedic problems, and the technical knowledge needed to implement deep learning-based solutions. To maximize the utilization of rapidly advancing technologies derived from deep learning models, orthopedic surgeons should understand the steps needed to design, organize, implement, and evaluate a deep learning project and its workflow. Equipping surgeons with this knowledge is the objective of this three-part editorial review. Part I described the processes involved in defining the problem, team building, data acquisition, curation, labeling, and establishing the ground truth. Building on that, this review (Part II) provides guidance on pre-processing and augmenting the data, making use of open-source libraries/toolkits, and selecting the required hardware to implement the pipeline. Special considerations regarding model training and evaluation unique to deep learning models relative to "shallow" machine learning models are also reviewed. Finally, guidance pertaining to the clinical deployment of deep learning models in the real world is provided. As in Part I, the focus is on applications of deep learning for computer vision and imaging.
Asunto(s)
Aprendizaje Profundo , Cirujanos Ortopédicos , Cirujanos , Humanos , Inteligencia Artificial , Aprendizaje AutomáticoRESUMEN
PURPOSE: To determine return to soccer rates and soccer performance in a large cohort of competitive soccer players after hip arthroscopic surgery for the treatment of femoroacetabular impingement (FAI) and to identify possible risk factors associated with not returning to soccer. METHODS: An institutional hip preservation registry was retrospectively reviewed for patients identified as competitive soccer players who underwent primary hip arthroscopy for FAI performed between 2010 and 2017. Patient demographics and injury characteristics as well as clinical and radiographic findings were recorded. All patients were contacted for return to soccer information using a soccer-specific return to play questionnaire. Multivariable logistic regression analysis was used to identify potential risk factors for not returning to soccer. RESULTS: Eighty-seven competitive soccer players (119 hips) were included. 32 players (37%) underwent simultaneous or staged bilateral hip arthroscopy. The mean age at surgery was 21.6 ± 7.0 years. Overall, 65 players (74.7%) returned to soccer, of which 43 players (49% of all included players) returned to pre-injury level of play or better. Most common reasons for not returning to soccer were pain or discomfort (50%) followed by fear of re-injury (31.8%). The mean time to return to soccer was 33.1 ± 26.3 weeks. Among 22 players who did not return to soccer, 14 (63.6%) reported satisfaction from surgery. Multivariable logistic regression analysis revealed female players (odds ratio [OR] = 0.27; confidence interval [CI] = 0.083 to 0.872; p = 0.029) and older aged players (OR = 0.895; 95% CI = 0.832 to 0.963; p = 0.003) were less likely to return to soccer. Bilateral surgery was not found to be a risk factor. CONCLUSION: Hip arthroscopic treatment for FAI in symptomatic competitive soccer players allowed three-quarters of them to return to soccer. Despite not returning to soccer, two-thirds of players who did not return to soccer were satisfied with their outcome. Female and older aged players were less likely to return to soccer. These data can better guide clinicians and soccer players with realistic expectations related to the arthroscopic management of symptomatic FAI. LEVEL OF EVIDENCE: III.
Asunto(s)
Pinzamiento Femoroacetabular , Fútbol , Humanos , Femenino , Persona de Mediana Edad , Anciano , Adolescente , Adulto Joven , Adulto , Pinzamiento Femoroacetabular/cirugía , Fútbol/lesiones , Articulación de la Cadera/cirugía , Artroscopía , Estudios Retrospectivos , Volver al Deporte , Resultado del TratamientoRESUMEN
PURPOSE: To define the clinical effect of intra-articular injection of iliac crest-derived bone marrow aspirate concentrate (BMAC) at the time of hip arthroscopy in patients with symptomatic labral tears and early radiographic degenerative changes. METHODS: A retrospective review of a prospectively collected hip registry database was performed. Patients with symptomatic labral tears and Tönnis grade 1 or 2 degenerative changes who underwent labrum-preserving hip arthroscopy with BMAC injection were included and were matched with patients who underwent hip arthroscopy without BMAC injection. Patient-reported outcomes (PROs) collected preoperatively and up to 2 years postoperatively included the modified Harris Hip Score, Hip Outcome Score-Activities of Daily Living, Hip Outcome Score-Sport, and International Hip Outcome Tool 33 score. Clinical relevance was measured with the minimal clinically important difference, patient acceptable symptom state, and substantial clinical benefit for each outcome score. RESULTS: A total of 35 patients underwent labrum-preserving hip arthroscopy with BMAC injection and were matched with 35 control patients. There were no differences in demographic characteristics between the groups (P > .05). The BMAC group consisted of 22 patients (62.9%) with Tönnis grade 1 changes and 13 (37.1%) with Tönnis grade 2 changes, whereas all 35 control patients had Tönnis grade 0 hips. All PROs were significantly improved in both groups at 2 years, with no difference in improvement. The rate of failure requiring conversion to total hip arthroplasty was 14.3% (mean, 1.6 years postoperatively) in the BMAC group and 5.7% (mean, 7 years postoperatively) in the control group (P = .09). The difference in the frequency of patients achieving the minimal clinically important difference, patient acceptable symptom state, and substantial clinical benefit was not statistically significant between cohorts. CONCLUSIONS: In a challenging group of patients with symptomatic labral tears and early radiographic degenerative changes, hip arthroscopy with BMAC injection results in statistically and clinically significant improvement in PROs comparable to a group of patients with nonarthritic hips undergoing hip arthroscopy at short-term follow-up. LEVEL OF EVIDENCE: Level III, retrospective comparative therapeutic trial.
Asunto(s)
Artritis , Pinzamiento Femoroacetabular , Humanos , Articulación de la Cadera/cirugía , Estudios Retrospectivos , Resultado del Tratamiento , Pinzamiento Femoroacetabular/cirugía , Satisfacción del Paciente , Artroscopía/métodos , Actividades Cotidianas , Médula Ósea , Medición de Resultados Informados por el Paciente , Inyecciones Intraarticulares , Estudios de SeguimientoRESUMEN
Literature surrounding artificial intelligence (AI)-related applications for hip and knee arthroplasty has proliferated. However, meaningful advances that fundamentally transform the practice and delivery of joint arthroplasty are yet to be realized, despite the broad range of applications as we continue to search for meaningful and appropriate use of AI. AI literature in hip and knee arthroplasty between 2018 and 2021 regarding image-based analyses, value-based care, remote patient monitoring, and augmented reality was reviewed. Concerns surrounding meaningful use and appropriate methodological approaches of AI in joint arthroplasty research are summarized. Of the 233 AI-related orthopaedics articles published, 178 (76%) constituted original research, while the rest consisted of editorials or reviews. A total of 52% of original AI-related research concerns hip and knee arthroplasty (n = 92), and a narrative review is described. Three studies were externally validated. Pitfalls surrounding present-day research include conflating vernacular ("AI/machine learning"), repackaging limited registry data, prematurely releasing internally validated prediction models, appraising model architecture instead of inputted data, withholding code, and evaluating studies using antiquated regression-based guidelines. While AI has been applied to a variety of hip and knee arthroplasty applications with limited clinical impact, the future remains promising if the question is meaningful, the methodology is rigorous and transparent, the data are rich, and the model is externally validated. Simple checkpoints for meaningful AI adoption include ensuring applications focus on: administrative support over clinical evaluation and management; necessity of the advanced model; and the novelty of the question being answered.Cite this article: Bone Joint J 2022;104-B(12):1292-1303.
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Realidad Aumentada , Ortopedia , Humanos , Inteligencia Artificial , Aprendizaje AutomáticoRESUMEN
BACKGROUND: Individualized risk prediction has become possible with machine learning (ML), which may have important implications in enhancing clinical decision making. We previously developed an ML algorithm to predict propensity for clinically meaningful outcome improvement after hip arthroscopy for femoroacetabular impingement syndrome. External validity of prognostic models is critical to determine generalizability, although it is rarely performed. PURPOSE: To assess the external validity of an ML algorithm for predicting clinically meaningful improvement after hip arthroscopy. STUDY DESIGN: Cohort study; Level of evidence, 3. METHODS: An independent hip preservation registry at a tertiary academic medical center was queried for consecutive patients/athletes who underwent hip arthroscopy for femoroacetabular impingement syndrome between 2015 and 2017. By assuming a minimal clinically important difference (MCID) outcome/event proportion of 75% based on the original study, a minimum sample of 132 patients was required. In total, 154 patients were included. Age, body mass index, alpha angle on anteroposterior pelvic radiographs, Tönnis grade and angle, and preoperative Hip Outcome Score-Sports Subscale were used as model inputs to predict the MCID for the Hip Outcome Score-Sports Subscale 2 years postoperatively. Performance was assessed using identical metrics to the internal validation study and included discrimination, calibration, Brier score, and decision curve analysis. RESULTS: The concordance statistic in the validation cohort was 0.80 (95% CI, 0.71 to 0.87), suggesting good to excellent discrimination. The calibration slope was 1.16 (95% CI, 0.74 to 1.61) and the calibration intercept 0.13 (95% CI, -0.26 to 0.53). The Brier score was 0.15 (95% CI, 0.12 to 0.18). The null model Brier score was 0.20. Decision curve analysis revealed favorable net treatment benefit for patients with use of the algorithm as compared with interventional changes made for all and no patients. CONCLUSION: The performance of this algorithm in an independent patient population in the northeast region of the United States demonstrated superior discrimination and comparable calibration to that of the derivation cohort. The external validation of this algorithm suggests that it is a reliable method to predict propensity for clinically meaningful improvement after hip arthroscopy and is an essential step forward toward introducing initial use in clinical practice. Potential uses include integration into electronic medical records for automated prediction, enhanced shared decision making, and more informed allocation of resources to optimize patient outcomes.
Asunto(s)
Pinzamiento Femoroacetabular , Humanos , Preescolar , Pinzamiento Femoroacetabular/cirugía , Artroscopía , Estudios de Cohortes , Resultado del Tratamiento , Actividades Cotidianas , Aprendizaje Automático , AlgoritmosRESUMEN
PURPOSE: To evaluate the reliability, construct validity, and responsiveness of the lower extremity-specific Patient-Reported Outcomes Measurement Information System (PROMIS) Mobility (MO) bank in patients who underwent hip arthroscopic surgery for femoroacetabular impingement. METHODS: Patients who underwent primary hip arthroscopic surgery at a large academic musculoskeletal specialty center between November 2019 and November 2020 completed the following baseline and 6-month measures: PROMIS MO, PROMIS Pain Interference (PI), PROMIS Physical Function (PF), modified Harris Hip Score, International Hip Outcome Tool 33, visual analog scale, and Single Assessment Numeric Evaluation. Construct validity was evaluated using Spearman correlation coefficients. The number of questions until completion was recorded as a marker of test burden. The percentage of patients scoring at the extreme high (ceiling) or low (floor) for each measure was recorded to measure inclusivity. Responsiveness was tested by comparing differences between baseline and 6-month measures, controlling for age and sex, using generalized estimating equations. Magnitudes of responsiveness were assessed through the effect size (Cohen d). RESULTS: In this study, 660 patients (50% female patients) aged 32 ± 14 years were evaluated. PROMIS MO showed a strong correlation with PROMIS PF (r = 0.84, P < .001), the International Hip Outcome Tool 33 (r = 0.73, P < .001), PROMIS PI (r = -0.76, P < .001), and the modified Harris Hip Score (r = 0.73, P < .001). Neither PROMIS MO, PROMIS PI, nor PROMIS PF met the conventional criteria for floor or ceiling effects (≥15%). The mean number of questions answered (± standard deviation) was 4.7 ± 2.1 for PROMIS MO, 4.1 ± 0.6 for PROMIS PI, and 4.1 ± 0.6 for PROMIS PF. From baseline to 6 months, the PROMIS and legacy measures exhibited significant responsiveness (P < .05), with similar effect sizes between the patient-reported outcome measures. CONCLUSIONS: This longitudinal study reveals that in patients undergoing hip arthroscopy, PROMIS MO computerized adaptive testing maintains high correlation with legacy hip-specific instruments, significant responsiveness to change, and low test burden compared with legacy measures, with no ceiling or floor effects at 6-month postoperative follow-up. LEVEL OF EVIDENCE: Level IV, retrospective case series.
Asunto(s)
Artroscopía , Pinzamiento Femoroacetabular , Humanos , Femenino , Masculino , Pinzamiento Femoroacetabular/cirugía , Estudios Retrospectivos , Reproducibilidad de los Resultados , Estudios Longitudinales , Pruebas Adaptativas Computarizadas , Medición de Resultados Informados por el Paciente , Sistemas de InformaciónRESUMEN
BACKGROUND: Anterior cruciate ligament (ACL) graft position within the anatomic femoral footprint of the native ACL and the flexion angle at which the graft is fixed (i.e., fixation angle) are important considerations in ACL reconstruction surgery. However, their combined effect on ACL graft force remains less well understood. HYPOTHESIS: During passive flexion, grafts placed high within the femoral footprint carry lower forces than grafts placed low within the femoral footprint (i.e., high and low grafts, respectively). Forces carried by high grafts are independent of fixation angle. All reconstructions impart higher forces on the graft than those carried by the native ACL. STUDY DESIGN: Controlled laboratory study. METHODS: Five fresh-frozen cadaveric knees were mounted to a robotic manipulator and flexed from full extension to 90° of flexion. The ACL was sectioned and ACL force was calculated via superposition. ACL reconstructions were then performed using a patellar tendon autograft. For each knee, four different reconstruction permutations were tested: high and low femoral graft positions fixed at 15° and at 30° of flexion. Graft forces were calculated from full extension to 90° of flexion for each combination of femoral graft position and fixation angle again via superposition. Native ACL and ACL graft forces were compared through early flexion (by averaging tissue force from 0 to 30° of flexion) and in 5° increments from full extension to 90° of flexion. RESULTS: When fixed at 30° of flexion, high grafts carried less force than low grafts through early flexion bearing a respective 64 ± 19 N and 88 ± 11 N (p = 0.02). Increasing fixation angle from 15° to 30° caused graft forces through early flexion to increase 40 ± 13 N in low grafts and 23 ± 6 N in high grafts (p < 0.001). Low grafts fixed at 30° of flexion differed most from the native ACL, carrying 67 ± 9 N more force through early flexion (p < 0.001). CONCLUSION: ACL grafts placed high within the femoral footprint and fixed at a lower flexion angle carried less force through passive flexion compared to grafts placed lower within the femoral footprint and fixed at a higher flexion angle. At the prescribed pretensions, all grafts carried higher forces than the native ACL through passive flexion. CLINICAL RELEVANCE: Both fixation angle and femoral graft location within the anatomic ACL footprint influence graft forces and, therefore, should be considered when performing ACL reconstruction.
Asunto(s)
Reconstrucción del Ligamento Cruzado Anterior , Ligamento Cruzado Anterior , Ligamento Cruzado Anterior/cirugía , Fenómenos Biomecánicos , Cadáver , Fémur/cirugía , Humanos , Articulación de la Rodilla/cirugía , Rango del Movimiento ArticularRESUMEN
The Patient-Reported Outcomes Measurement Information System (PROMIS) Global-10 assesses generic-related quality of life, but has not been well studied in the orthopaedic literature. The purpose was to compare PROMIS Global-10 and legacy hip-specific patient-reported outcome measures (PROMs) in patients undergoing hip arthroscopy for femoroacetabular impingement syndrome (FAIS). This study included patients who underwent primary hip arthroscopy with complete preoperative and 6-month post-operative follow-up. PROMIS Global-10 Physical (PROMIS-P) and Mental (PROMIS-M) components, as well as the modified Harris hip score (mHHS) and International Hip Outcome Tool-33 (iHOT-33) were assessed. PROM analysis included: post-operative changes, correlations, floor and ceiling effects and responsiveness. Final analysis included 112 patients. Average age and body mass index were 36.1±11.7 years and 24.8±3.9 kg/m2, respectively. All 6-month PROMs, except PROMIS-M, were significantly improved compared to preoperative level (P<0.02). Preoperatively, PROMIS-P was poorly correlated with mHHS and iHOT-33 (r s <0.4) whereas PROMIS-M was only poorly correlated with iHOT-33 (r s <0.4, 95% CI of 0.02-0.37). Post-operatively, the iHOT-33 was poorly correlated with both PROMIS measures (r s <0.4). The mHHS was fairly correlated with both PROMIS measures (r s <0.6) post-operatively. The effect sizes for mHHS and iHOT-33 were high (d=1.2 and 1.40, respectively), whereas the effect sizes for PROMIS Global-10 were small (d<0.3). PROMIS Global-10 demonstrated lower effect sizes and poor to fair correlation with legacy hip-specific PROMs, and appears to have a limited role in the assessment of patients undergoing hip arthroscopy for FAIS. Therefore, the PROMIS Global-10 may have a limited role in assessing patients with FAIS.
RESUMEN
BACKGROUND: There is concern that utilization of lateral extra-articular tenodesis (LET) in conjunction with anterior cruciate ligament (ACL) reconstruction (ACLR) may disturb lateral compartment contact mechanics and contribute to joint degeneration. HYPOTHESIS: ACLR augmented with LET will alter lateral compartment contact mechanics in response to simulated pivoting maneuvers. STUDY DESIGN: Controlled laboratory study. METHODS: Loads simulating a pivot shift were applied to 7 cadaveric knees (4 male; mean age, 39 ± 12 years; range, 28-54 years) using a robotic manipulator. Each knee was tested with the ACL intact, sectioned, reconstructed (via patellar tendon autograft), and, finally, after augmenting ACLR with LET (using a modified Lemaire technique) in the presence of a sectioned anterolateral ligament and Kaplan fibers. Lateral compartment contact mechanics were measured using a contact stress transducer. Outcome measures were anteroposterior location of the center of contact stress (CCS), contact force from anterior to posterior, and peak and mean contact stress. RESULTS: On average, augmenting ACLR with LET shifted the lateral compartment CCS anteriorly compared with the intact knee and compared with ACLR in isolation by a maximum of 5.4 ± 2.3 mm (P < .001) and 6.0 ± 2.6 mm (P < .001), respectively. ACLR augmented with LET also increased contact force anteriorly on the lateral tibial plateau compared with the intact knee and compared with isolated ACLR by a maximum of 12 ± 6 N (P = .001) and 17 ± 10 N (P = .002), respectively. Compared with ACLR in isolation, ACLR augmented with LET increased peak and mean lateral compartment contact stress by 0.7 ± 0.5 MPa (P = .005) and by 0.17 ± 0.12 (P = .006), respectively, at 15° of flexion. CONCLUSION: Under simulated pivoting loads, adding LET to ACLR anteriorized the CCS on the lateral tibial plateau, thereby increasing contact force anteriorly. Compared with ACLR in isolation, ACLR augmented with LET increased peak and mean lateral compartment contact stress at 15° of flexion. CLINICAL RELEVANCE: The clinical and biological effect of increased anterior loading of the lateral compartment after LET merits further investigation. The ability of LET to anteriorize contact stress on the lateral compartment may be useful in knees with passive anterior subluxation of the lateral tibia.