RESUMEN
Introduction: The COVID-19 infection as an inflammatory disease has posed significant challenges to global public health due to multi-factor risks associated with it leading to disease severity and mortality. Understanding the effect of age and comorbidities on overall disease progression is crucial to identify highly susceptible individuals and to develop effective disease management strategies in a resource limited country like Pakistan. Methodology: A retrospective study was conducted on hospitalized COVID-19 patients to assess the prevalence of various comorbidities among different age groups and their effect on disease severity and mortality rate. Results: In this retrospective study, a cohort of 618 hospitalized COVID-19 patients was analyzed, consisting of 387 males (62.6 %) and 231 females (37.4 %). Notably, the young age group (15-24 years), had the lowest frequency of hospitalized COVID-19 patients, while no case was observed in children (≤14 years) showing a significant association (p < 0.001) of age and disease prevalence. Comorbidities were observed in 63.9 % of COVID-19 patients including hypertension (HTN), diabetes mellitus (DM), ischemic heart diseases (IHD), asthma, chronic kidney disease (CKD) and tuberculosis (TB). The most common comorbidities were HTN (42.1 %) followed by DM (33.8 %), IHD (16.5 %), asthma (11.2 %), CKD (7.9 %) and TB (1.9 %).Furthermore, the study revealed a significant association between comorbidities, age groups, and the need for non-invasive ventilation (NIV) (p < 0.001), mechanical ventilation (MV) (p < 0.001), and intensive care unit (ICU) admission (p < 0.001). Patients with specific comorbidities and those in the older age group (≥65 years) demonstrated a higher need for these interventions. However, patients without any comorbidity consistently exhibited the highest cumulative proportion of survival at each time point, indicating better overall survival outcomes. In contrast, patients with multimorbidities of DM/HTN/IHD, HTN/IHD, and DM/HTN/CKD had comparatively lower survival rates and higher mortality rates (p < 0.001). Conclusion: This research highlights the significant impact of age, comorbidities and multimorbidities on the severity and mortality of COVID-19 patients. It highlights the importance of considering these factors in tailoring effective management strategies for patients with COVID-19 or other infectious respiratory diseases.
RESUMEN
Medicinal plants have been widely used for their antimicrobial properties against various microorganisms. Arisaema dracontium a familiar medicinal plant, was analyzed and silver nanoparticles (AgNPs) were synthesized using extracts of different parts of its shoot including leaves and stem. Further, the antimicrobial activity of different solvent extracts such as ethyl acetate, n-hexane, ethanol, methanol, and chloroform extracts were analyzed. AgNPs were prepared using aqueous silver nitrate solution and assessed their antibacterial activity against multidrug-resistant (MDR) and Non-multidrug-resistant bacteria. The characterization of AgNPs was done by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), UV-visible spectroscopy, Fourier Transform Infrared (FTI), and X-ray Diffraction approaches. The leaf extract contained Tannins, Flavonoids, Terpenoids, and Steroids while Alkaloids, Saponins, and Glycosides were undetected. The stem extract contained Alkaloids, Tannins, Flavonoids, Saponins, Steroids, and Glycosides while Terpenoids were not observed. The AgNPs synthesized from stem and leaf extracts in the current study had spherical shapes and ranged in size from 1 to 50 nm and 20-500 nm respectively as were visible in TEM. The leaf extract-prepared AgNPs showed significantly higher activities i.e., 27.75 mm ± 0.86 against the MDR strains as compared to the stem-derived nanoparticles i.e., 24.33 ± 0.33 by comparing the zones of inhibitions which can be attributed to the differences in their phytochemical constituents. The acute toxicity assay confirmed that no mortality was noticed when the dosage was 100 mg per kg which confirms that the confirms that the AgNPs are not toxic when used in low quantities. It is concluded that leaf extract from A. dracontium could be used against pathogenic bacteria offering economic and health benefits compared to the chemical substances.
Asunto(s)
Antibacterianos , Nanopartículas del Metal , Pruebas de Sensibilidad Microbiana , Extractos Vegetales , Hojas de la Planta , Plata , Extractos Vegetales/farmacología , Extractos Vegetales/química , Nanopartículas del Metal/química , Antibacterianos/farmacología , Antibacterianos/química , Plata/farmacología , Plata/química , Hojas de la Planta/química , Bacterias/efectos de los fármacos , Difracción de Rayos X , Fitoquímicos/farmacología , Espectroscopía Infrarroja por Transformada de Fourier , Farmacorresistencia Bacteriana Múltiple/efectos de los fármacos , Plantas Medicinales/química , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Tallos de la Planta/químicaRESUMEN
Potato (Solanum tuberosum) is the third crucial global crop facing threats from Alternaria solani, a necrotrophic fungal pathogen causing early blight disease. Beyond crop impact, it leads to substantial production reduction and economic losses worldwide. This study introduces a green synthesis method for producing Ferric Oxide nanoparticles (FNPs) using dried Guava (Psidium guajava) leaves. Guava leaf extract acts as a reducing agent, with iron (III) chloride hexahydrate (FeCl3·6H2O) as the oxidizing agent. This study employed various characterization techniques for Ferric Oxide nanoparticles (FNPs). Fourier Transform Infrared Spectroscopy (FTIR) revealed peaks at 877 cm-1, 1180 cm-1, 1630 cm-1, 1833 cm-1, 2344 cm-1, and 3614 cm-1, associated with Maghemite vibrations, polyphenol compounds, and amino acids. UV-Vis spectroscopy exhibited a characteristic absorbance peak at 252 nm for FNPs. Scanning Electron Microscope (SEM) images illustrated particle sizes of 29-41 nm, and Energy Dispersive Spectroscopy (EDS) indicated elemental composition. X-ray diffraction (XRD) confirmed crystalline FNPs with peaks at 26.78, 30.64, 36.06, 38.21, 43.64, 53.52, 57.42, 63.14 and 78.32. Disease resistance assays demonstrated FNPs' effectiveness against A. solani, reducing disease incidence and severity. In the leaf detach assay, concentrations of 15, 10 and 5 mg/L showed a dose-dependent reduction in disease severity and incidence. The Greenhouse Assay confirmed FNPs' concentration-dependent effect on disease incidence and severity. The study also explored FNPs' potential as biocontrol agents showing no adverse effects on overall plant development. Additionally, the study highlighted the agronomic potential of FNPs in enhancing plant growth and development emphasizing their role as micronutrients in biofortification. The findings suggest the promising application of FNPs in plant protection and biofortification strategies.
Asunto(s)
Alternaria , Nanopartículas del Metal , Nanopartículas , Solanum tuberosum , Nanopartículas/química , Compuestos Férricos/química , Espectroscopía Infrarroja por Transformada de Fourier , Nanopartículas del Metal/química , Extractos Vegetales/química , Difracción de Rayos X , Antibacterianos/químicaRESUMEN
Nanotechnology is one of the most advance and multidisciplinary fields. Recent advances in nanoscience and nanotechnology radically changed the way we diagnose, treat, and prevent various diseases in all aspects of human life. The use of plants and their extracts is one of the most valuable methods towards rapid and single-step protocol preparation for various nanoparticles, keeping intact "the green principles" over the conventional ones and proving their dominance for medicinal importance. A facile and eco-friendly technique for synthesizing silver nanoparticles has been developed by using the latex of Euphorbia royleana as a bio-reductant for reducing Ag+ ions in an aqueous solution. Various characterization techniques were employed to validate the morphology, structure, and size of nanoparticles via UV-Vis spectroscopy, XRD, SEM, and EDS. FTIR spectroscopy validates different functional groups associated with biomolecules stabilizing/capping the silver nanoparticles, while SEM and XRD revealed spherical nanocrystals with FCC geometry. The results revealed that latex extract-mediated silver nanoparticles (LER-AgNPs) exhibited promising antibacterial activity against both gram-positive and -negative bacterial strains (Bacillus pumilus, Staphylococcus aureus, E. coli, Pseudomonas aeruginosa, and Streptococcus viridians). Both latex of E. royleana and LER-AgNPs were found to be potent in scavenging DPPH free radicals with respective EC50s and EC70s as 0.267% and 0.518% and 0.287% and 0.686%. ROSs produced in the body damage tissue and cause inflammation in oxidative stress-originated diseases. H2O2 and OH* scavenging activity increased with increasing concentrations (20-100 µg/mL) of LER-AgNPs. Significant reestablishment of ALT, AST, ALP, and bilirubin serum levels was observed in mice intoxicated with acetaminophen (PCM), revealing promising hepatoprotective efficacy of LER-AgNPs in a dose-dependent manner.
RESUMEN
The application of green synthesis for silver nanoparticles in nanomedicine has experienced significant growth. Strobilanthes glutinosus, a plant primarily located in the Himalayas, remains largely unexplored. Considering the biomedical value of S. glutinosus, phytochemicals from this plant were used for the biosynthesis of silver nanoparticles. Silver nanoparticles were synthesized from aqueous extract of root and leaves of Strobilanthes glutinosus. The synthesized silver nanoparticles were characterized using UV-Vis spectrophotometry, Fourier-transform infrared spectroscopy, transmission electron microscopy, and X-ray diffraction. Total phenolic and flavonoid contents of plants were determined and compared with nanoparticles. The biomedical efficacy of plant extracts and silver nanoparticles was assessed using antioxidant and antibacterial assays. The UV-Vis spectra of leaf- and root-extract-mediated AgNPs showed characteristic peaks at 428 nm and 429 nm, respectively. TEM images revealed the polycrystalline and spherical shapes of leaf- and root-extract-mediated AgNPs with size ranges of 15-60 nm and 20-52 nm, respectively. FTIR findings shown the involvement of phytochemicals of root and leaf extracts in the reduction of silver ions into silver nanoparticles. The crystalline face-centered cubic structure of nanoparticles is depicted by the XRD spectra of leaf and root AgNPs. The plant has an ample amount of total phenolic content (TPC) and total flavonoid content (TFC), which enhance the scavenging activity of plant samples and their respective AgNPs. Leaf and root AgNPs have also shown good antibacterial activity, which may enhance the medicinal value of AgNPs.
RESUMEN
Rising soil salinity is a major concern for agricultural production worldwide, particularly in arid and semi-arid regions. To improve salt tolerance and the productivity of economic crop plants in the face of future climatic changes, plant-based solutions are required to feed the continuously increasing world population. In the present study, we aimed to ascertain the impact of Glutamic-acid-functionalized iron nanoparticles (Glu-FeNPs) on two varieties (NM-92 and AZRI-2006) of mung beans with different concentrations (0, 40 mM, 60 mM, and 80 mM) of osmotic stress. The result of the study showed that vegetative growth parameters such as root and shoot length, fresh and dry biomass, moisture contents, leaf area, and the number of pods per plant were significantly decreased with osmotic stress. Similarly, biochemicals such as protein, chlorophylls, and carotenes contents also significantly declined under induced osmotic stress. The application of Glu-FeNPs significantly (p ≤ 0.05) restored both the vegetative growth parameters and biochemical contents of plants under osmotic stress. The pre-sowing treatment of seeds with Glu-FeNPs significantly ameliorated the tolerance level of Vigna radiata to osmotic stress by optimizing the level of antioxidant enzymes and osmolytes such as superoxide dismutase (SOD), peroxidase (POD), and proline contents. Our finding indicates that Glu-FeNPs significantly restore the growth of plants under osmotic stress via enhancing photosynthetic activity and triggering the antioxidation system of both varieties.
RESUMEN
Cadmium (Cd) and lead (Pb) are global environmental pollutants. In this study, Nostoc sp. MK-11 was used as an environmentally safe, economical, and efficient biosorbent for the removal of Cd and Pb ions from synthetic aqueous solutions. Nostoc sp. MK-11 was identified on a morphological and molecular basis using light microscopic, 16S rRNA sequences and phylogenetic analysis. Batch experiments were performed to determine the most significant factors for the removal of Cd and Pb ions from the synthetic aqueous solutions using dry Nostoc sp. MK1 biomass. The results indicated that the maximum biosorption of Pb and Cd ions was found under the conditions of 1 g of dry Nostoc sp. MK-11 biomass, 100 mg/L of initial metal concentrations, and 60 min contact time at pH 4 and 5 for Pb and Cd, respectively. Dry Nostoc sp. MK-11 biomass samples before and after biosorption were characterized using FTIR and SEM. A kinetic study showed that a pseudo second order kinetic model was well fitted rather than the pseudo first order. Three isotherm models Freundlich, Langmuir, and Temkin were used to explain the biosorption isotherms of metal ions by Nostoc sp. MK-11 dry biomass. Langmuir isotherm, which explains the existence of monolayer adsorption, fitted well to the biosorption process. Considering the Langmuir isotherm model, the maximum biosorption capacity (qmax) of Nostoc sp. MK-11 dry biomass was calculated as 75.757 and 83.963 mg g-1 for Cd and Pb, respectively, which showed agreement with the obtained experimental values. Desorption investigations were carried out to evaluate the reusability of the biomass and the recovery of the metal ions. It was found that the desorption of Cd and Pb was above 90%. The dry biomass of Nostoc sp. MK-11 was proven to be efficient and cost-effective for removing Cd and especially Pb metal ions from the aqueous solutions, and the process is eco-friendly, feasible, and reliable.
Asunto(s)
Cadmio , Contaminantes Químicos del Agua , Cadmio/química , Biomasa , Plomo , Filogenia , ARN Ribosómico 16S , Concentración de Iones de Hidrógeno , Cinética , Adsorción , Agua/química , Contaminantes Químicos del Agua/química , IonesRESUMEN
Pollen morphology of 12 salt-tolerant grasses (Calamagrostis pseudophragmites, Cenchrus biflorus, Cenchrus ciliaris, Cenchrus pennisetiformis, Cymbopogon jwarancusa, Dactyloctenium aegyptium, Echinochloa colona, Echinochloa crus-galli, Saccharum griffithii, Saccharum ravennae, Saccharum spontaneum, and Urochloa ramosa) from the Salt Range was studied using scanning electron microscopy (SEM) and light microscopy (LM). The main aim was the elucidation of taxonomic significance of pollen morphology, which might be useful for taxonomists in the identification of halophytic Poaceae taxa. The described pollen morphology is a good source of taxonomic characteristics that can help in species and genera differentiation. The investigated variations in the pollen micromorphological features and exploration of new palynological traits support and strengthen the systematics of Poaceae. The pollen shape of all studied species was sub-spheroidal, and exine ornamentation includes microechinate-areolate (11 spp.) and microechinate (1 spp.). Two types of pollen apertures were reported, i.e., monoporate (11 spp.) and diporate (Cenchrus pennisetiformis). The annulus was found in all species while operculum was observed only in three species. The univariate and multivariate analyses were used to analyze the quantitative data. The highest pollen viability values (%) depicted the adaptability of Poaceae taxa in the salt region. Overall, the pollen characteristics in polar and equatorial view, apertures, annulus, operculum, and surface ornamentation of pollen grains of the family Poaceae are of great taxonomic significance for the species identification.
RESUMEN
Nanotechnology is one of the vital and quickly developing areas and has several uses in various commercial zones. Among the various types of metal oxide-based nanoparticles, zinc oxide nanoparticles (ZnO NPs) are frequently used because of their effective properties. The ZnO nanocomposites are risk-free and biodegradable biopolymers, and they are widely being applied in the biomedical and therapeutics fields. In the current study, the biochar-zinc oxide (MB-ZnO) nanocomposites were prepared using a solvent-free ball-milling technique. The prepared MB-ZnO nanocomposites were characterized through scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray powder diffraction (XRD), and thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and ultraviolet-visible (UV) spectroscopy. The MB-ZnO particles were measured as 43 nm via the X-ray line broadening technique by applying the Scherrer equation at the highest peak of 36.36°. The FTIR spectroscope results confirmed MB-ZnO's formation. The band gap energy gap values of the MB-ZnO nanocomposites were calculated as 2.77 eV by using UV-Vis spectra. The MB-ZnO nanocomposites were tested in various in vitro biological assays, including biocompatibility assays against the macrophages and RBCs and the enzymes' inhibition potential assay against the protein kinase, alpha-amylase, cytotoxicity assays of the leishmanial parasites, anti-inflammatory activity, antifungal activity, and antioxidant activities. The maximum TAC (30.09%), TRP (36.29%), and DPPH radicals' scavenging potential (49.19%) were determined at the maximum dose of 200 µg/mL. Similarly, the maximum activity at the highest dose for the anti-inflammatory (76%), at 1000 µg/mL, alpha-amylase inhibition potential (45%), at 1000 µg/mL, antileishmanial activity (68%), at 100 µg/mL, and antifungal activity (73 ± 2.1%), at 19 mg/mL, was perceived, respectively. It did not cause any potential harm during the biocompatibility and cytotoxic assay and performed better during the anti-inflammatory and antioxidant assay. MB-ZnO caused moderate enzyme inhibition and was more effective against pathogenic fungus. The results of the current study indicated that MB-ZnO nanocomposites could be applied as effective catalysts in various processes. Moreover, this research provides valuable and the latest information to the readers and researchers working on biopolymers and nanocomposites.
Asunto(s)
Nanopartículas del Metal , Óxido de Zinc , Antibacterianos/farmacología , Antifúngicos/farmacología , Antioxidantes/farmacología , Carbón Orgánico , Nanopartículas del Metal/química , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos X , Zea mays , Óxido de Zinc/química , Óxido de Zinc/farmacología , alfa-AmilasasRESUMEN
The pollen micro-morphology of family Solanaceae from the different phytogeographical region of Pakistan has been assessed. In this study, thirteen species belonging to ten genera of Solanaceae have been studied using light and scanning electron microscopy for both qualitative and quantitative features. Solanaceae is a eurypalynous family and a significant variation was observed in pollen size, shape, polarity and exine sculpturing. Examined plant species includes, Brugmansia suaveolens, Capsicum annuum, Cestrum parqui, Datura innoxia, Solanum lycopersicum, Nicotiana plumbaginifolia, Petunia hybrida, Physalis minima, Solanum americanum, Solanum erianthum, Solanum melongena, Solanum surattense and Withania somnifera. The prominent pollen type is tricolporate and shed as a monad. High pollen fertility reflects that observed taxa are well-known in the study area. Based on the observed pollen traits a taxonomic key was developed for the accurate and quick identification of species. Principal Component Analysis was performed that shows some morphological features are the main characters in the identification. Cluster Analysis was performed that separate the plant species in a cluster. The findings highlight the importance of Palyno-morphological features in the characterization and identification of Solanaceous taxa. It is concluded that both LM and SEM significantly play a key role in correct identification of taxa studied.
Asunto(s)
Capsicum , Solanaceae , Microscopía Electrónica de Rastreo , Pakistán , Polen , NicotianaRESUMEN
In this study, foliar anatomy and pollen morphology of 10 species of Acanthaceae has been investigated using light and scanning electron microscopy. The study was aimed to highlight the role of microscopy in microteaching at community for proper characterization of plants using palyno-anatomical characters including pollen type, exine sculpturing, shape of epidermal cells, pattern of anticlinal wall, type and size of stomata, and trichome. Most of the species have polygonal cell shapes but some species have irregular, tetragonal, and pentagonal shape of epidermal cells. The largest epidermal cell length on adaxial and abaxial surface were observed in Asystasia gangetica 66.95 and 87.40 µm whereas least was observed on adaxial surface in Justicia adhatoda 36.9 µm and on abaxial surface in Barleria cristata 35.65 µm. In anatomy, species have diacytic type of stomata, whereas stomata of paracytic type observed in two species, while in A. gangetica cyclocytic type of stomata are present. Quantitively on abaxial surface, largest stomata length 29.9 µm and width 24.30 µm was noted in B. cristata. While shortest stomata length was observed in Ruellia prostrata 25.95 µm whereas minimum width of stomata was examined in Barleria acanthoides 2.05 µm. The diversity of trichomes are present in all species except in Ruellia brittoniana. Acanthaceae can be characterized by exhibiting different pollen morphology having five types of pollen shapes, prolate, spheroidal, perprolate, subprolate, and oblate spheroidal. Exine peculiarities showing variations such as reticulate, granulate, coarsely reticulate, lophoreticulate, perforate tectate, and granulate surface were examined.
Asunto(s)
Acanthaceae/anatomía & histología , Epidermis de la Planta/anatomía & histología , Hojas de la Planta/anatomía & histología , Polen/ultraestructura , Acanthaceae/citología , Células Epidérmicas/ultraestructura , Microscopía , Microscopía Electrónica de Rastreo , Epidermis de la Planta/citología , Hojas de la Planta/citología , Estomas de Plantas/ultraestructura , Enseñanza , Tricomas/ultraestructuraRESUMEN
Exploration of substitute energy feed-stocks is the much-debated topic in the scientific society due to increasing power crises and related ecological concerns. As a source of sustainable energy, biodiesel turns out to be the best alternative to petro fuels. In this context, nonedible oil-producing seeds might be a potential source for biodiesel production owing to their environment-friendly nature and cost-effectiveness. The current study, consequently, deals with the investigation and identification of micro-morphological characters between six novel nonedible oil-bearing seeds employing scanning electron microscopy as possible biodiesel feed-stocks. Light microscopic examinations show that seed size varies from 0.3 to 1.3 cm in width and 0.5 to 1.5 cm in. Additionally, a large difference in seed color ranges from dark brown, black, and various shades of light brown was also witnessed. The FFA content of the seeds ranges in 0.3-4.1 mg KOH/g, and the seed oil content fall in 30-65% (w/w) range. SEM-mediated seed ultrastructure investigations displays greater variation in seed size, shape, color, periclinal wall shape, and sculpturing and so on. All the seeds differ from rounded, ovoid, ovate, oblong, flattened, and elliptical shape. Greater variation in seed wall structure has been seen from angular, entire, irregular, straight, elongated, smooth, and polygonal. The periclinal wall arrangements show alteration from flat, depressed, elevated, smooth, pentagonal, bullate, and coarse seed margins. The results obtained from the current study suggest that scanning electron microscopy could be a beneficial tool in vitalizing the hidden micromorphological characters among various nonedible oil producing seeds, which eventually helps in exploration, correct identification, seed classification, and authentication in future.
RESUMEN
In recent study, 15 taxa of family Poaceae from Dera Ghazi Khan were investigated for morphological characterization of seeds. Scanning electron microscopy (SEM) was utilized to study morphological features of grass seeds. Moreover, economic importance of studied taxa has been discussed in present research. Grass seeds or caryopsis were collected in their mature state from different areas of Dera Ghazi Khan. Collected caryopses were subjected to SEM to investigate surface sculpture, epidermal cell shape, and cell wall patterns. Caryopsis shape observed was elliptic to oval. Also, the morphology of plant is being investigated. Cell wall pattern observed was straight and wavy. Surface sculpturing varies from smooth to reticulate. Epidermal cell shape was either wavy or irregular. Hilum position is terminal in all species. Epidermal cell structure and cell wall pattern was not observable in some species. Major variations among studied taxa were observed in terms of seed surface pattern. Five types of caryopsis surface pattern were observed namely, striate, smooth, reticulate, papillate, and granulate. Investigated taxa illustrated variations in terms of studied morphological features. Utilization of SEM has been proved very helpful in exploring seed morphological features. These observed features can aid in delimitation and identification of various grass taxa. Recent research recommends the utilization of SEM for caryopsis morphology to solve the identification issue of problematic grass genera.
Asunto(s)
Poaceae/anatomía & histología , Poaceae/clasificación , Semillas/ultraestructura , Células Epidérmicas/ultraestructura , Microscopía Electrónica de Rastreo , Pakistán , Epidermis de la Planta/ultraestructura , Estomas de Plantas/ultraestructuraRESUMEN
Currently, exploration of alternative energy resources is hotly debated among the scientific community owing to rising energy crises and environmental issues. Biodiesel, as renewable energy source proves to be a better option and substitute to petro diesel. In this regard, nonedible seeds could be a better feedstock for synthesizing biodiesel due to their cost effectiveness and environmental friendly attributes. The present study, therefore, deals with the exploration and identification of micromorphologic features among eight novel nonedible oil yielding seeds via scanning electron microscopy (SEM) as potential feedstock for biodiesel industry. Light microscopic studies revealed that seeds size vary from 0.1-2.9 cm in length to 0.1-3 cm in width. Moreover, a great variation in seed color from black, green, and different shades of brown was also observed. Seeds ultra-structure examination by SEM exhibit great variation in seed shape, size, color, sculpturing and periclinal wall shape and arrangement and so on. All the understudy seeds vary from rounded, irregular, subspherical, ellipsoidal, reniform, flattened, polygonal, ovate, pyriform, oblong, and globose shape. Seeds wall structure exhibits great variation from entire, angular, straight, irregular, polygonal, smooth, and elongated. The periclinal wall pattern exhibits variation from flat to slightly concave-convex with straight, angular, undulate, or dentate seeds margin. Among the studied species only Argemone ochroleuca Linn. (Papaveraceae) possess micropylar peak, ridged raphe, and basal helium. The obtained results from the present study would therefore, suggest that SEM could be a useful tool in refreshing the veiled micromorphological features among different oil yielding seeds which in turn helps the researchers for their correct identification, exploration, authentication, and seeds classification in future.
RESUMEN
Seed micromorphological and macromorphological characteristics of 12 taxa of Caesalpiniaceae from Pakistan have been studied, using light and scanning electron microscopy, to investigate the importance of seed coat features as a taxonomic tool. Great variations have been observed in color, shape, dimension, and seed surface pattern among the different genera of the family. A taxonomic key was prepared for the studied taxa. Six types of seed shapes were observed; circular, elliptical, irregular, oblong, oval, and ovoid. All examined seeds were hard except fragile seeds of Haematoxylom campechianum. Eight types of surface ornamentation have been noticed that include levigate, lugose, papillate, reticulate, reticulate irregular, reticulate regular, rhombus, and rogues. Majority of the taxa has been observed with thick ornamentation wall but thin ornamentation wall has also been recorded in few species. Fracture line of the various patterns was present in all taxa except genus Bauhinia. Three types of texture crudeness; coarse, medium, and fine have been recorded. Both micromorphological and macromorphological characters of seed are very fruitful in identification and classification of Caesalpiniaceae.
Asunto(s)
Caesalpinia/anatomía & histología , Semillas/anatomía & histología , Semillas/ultraestructura , Caesalpinia/clasificación , Microscopía , Microscopía Electrónica de Rastreo , PakistánRESUMEN
The pollen morphology of 11 salt tolerant plant species of family Amaranthaceae from the salt range of Northern Punjab, Pakistan has been studied. The palyno-morphological characters were examined using light and scanning electron microscope. The examined all salt tolerant species have a slight difference in size but have similarity in shape, pore ornamentation, and polarity. The observed morphological characters of pollen grains were pollen symmetry, size, shape, pore ornamentation, pore size, number of pores, exine thickness, polar and equatorial diameter and, P/E ratio. Apolar type of pollens has been observed in all species. Shape of pollens was spheroidal. Exine sculpturing of pollen grains was scabrate (six spp), microechinate (four spp), and microechinate-scabrate (one spp). Different pori numbers were observed in different species. The pantoporate aperturate and sunken pore ornamentation have been reported in all species. A pollen taxonomic key was developed using examined morphological characters for the accurate identification of halophytic taxa. The high fertility and low sterility of pollens confirmed that the selected halophytes are well-established in the salt region. The findings highlight the taxonomic significance of pollen morphology in correct identification and differentiation of salt tolerant plant species.