RESUMEN
Increased life expectancy in industrialized countries is causing an increased incidence of osteoporosis and the need for bioactive bone implants. The integration of implants can be improved physically, but mainly by chemical modifications of the material surface. It was recognized that amino-group-containing coatings improved cell attachment and intracellular signaling. The aim of this study was to determine the role of the amino group density in this positive cell behavior by developing controlled amino-rich nanolayers. This work used covalent grafting of polymer-based nanocoatings with different amino group densities. Titanium coated with the positively-charged trimethoxysilylpropyl modified poly(ethyleneimine) (Ti-TMS-PEI), which mostly improved cell area after 30 min, possessed the highest amino group density with an N/C of 32%. Interestingly, changes in adhesion-related genes on Ti-TMS-PEI could be seen after 4 h. The mRNA microarray data showed a premature transition of the MG-63 cells into the beginning differentiation phase after 24 h indicating Ti-TMS-PEI as a supportive factor for osseointegration. This amino-rich nanolayer also induced higher bovine serum albumin protein adsorption and caused the cells to migrate slower on the surface after a more extended period of cell settlement as an indication of a better surface anchorage. In conclusion, the cell spreading on amine-based nanocoatings correlated well with the amino group density (N/C).
Asunto(s)
Aminas , Osteoblastos , Adsorción , Diferenciación Celular , Países DesarrolladosRESUMEN
Several physico-chemical modifications have been developed to improve cell contact with prosthetic oral implant surfaces. The activation with non-thermal plasmas was one option. Previous studies found that gingiva fibroblasts on laser-microstructured ceramics were hindered in their migration into cavities. However, after argon (Ar) plasma activation, the cells concentrated in and around the niches. The change in surface properties of zirconia and, subsequently, the effect on cell behavior is unclear. In this study, polished zirconia discs were activated by atmospheric pressure Ar plasma using the kINPen®09 jet for 1 min. Surfaces were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), and water contact angle. In vitro studies with human gingival fibroblasts (HGF-1) focused on spreading, actin cytoskeleton organization, and calcium ion signaling within 24 h. After Ar plasma activation, surfaces were more hydrophilic. XPS revealed decreased carbon and increased oxygen, zirconia, and yttrium content after Ar plasma. The Ar plasma activation boosted the spreading (2 h), and HGF-1 cells formed strong actin filaments with pronounced lamellipodia. Interestingly, the cells' calcium ion signaling was also promoted. Therefore, argon plasma activation of zirconia seems to be a valuable tool to bioactivate the surface for optimal surface occupation by cells and active cell signaling.
RESUMEN
BACKGROUND: Electronic Laboratory Notebooks (ELNs) are used to document experiments and investigations in the wet-lab. Protocols in ELNs contain a detailed description of the conducted steps including the necessary information to understand the procedure and the raised research data as well as to reproduce the research investigation. The purpose of this study is to investigate whether such ELN protocols can be used to create semantic documentation of the provenance of research data by the use of ontologies and linked data methodologies. METHODS: Based on an ELN protocol of a biomedical wet-lab experiment, a retrospective provenance model of the raised research data describing the details of the experiment in a machine-interpretable way is manually engineered. Furthermore, an automated approach for knowledge acquisition from ELN protocols is derived from these results. This structure-based approach exploits the structure in the experiment's description such as headings, tables, and links, to translate the ELN protocol into a semantic knowledge representation. To satisfy the Findable, Accessible, Interoperable, and Reuseable (FAIR) guiding principles, a ready-to-publish bundle is created that contains the research data together with their semantic documentation. RESULTS: While the manual modelling efforts serve as proof of concept by employing one protocol, the automated structure-based approach demonstrates the potential generalisation with seven ELN protocols. For each of those protocols, a ready-to-publish bundle is created and, by employing the SPARQL query language, it is illustrated that questions about the processes and the obtained research data can be answered. CONCLUSIONS: The semantic documentation of research data obtained from the ELN protocols allows for the representation of the retrospective provenance of research data in a machine-interpretable way. Research Object Crate (RO-Crate) bundles including these models enable researchers to easily share the research data including the corresponding documentation, but also to search and relate the experiment to each other.
Asunto(s)
Documentación , Bases del Conocimiento , Documentación/métodos , Electrónica , Estudios Retrospectivos , Web SemánticaRESUMEN
The high biocompatibility, good mechanical properties, and perfect esthetics of ceramic dental materials motivate investigation into their suitability as an endosseous implant. Osseointegration at the interface between bone and implant surface, which is a criterion for dental implant success, is dependent on surface chemistry and topography. We found out earlier that osteoblasts on sharp-edged micro-topographies revealed an impaired cell phenotype and function and the cells attempted to phagocytize these spiky elevations in vitro. Therefore, micro-structured implants used in dental surgery should avoid any spiky topography on their surface. The sandblasted, acid-etched, and heat-treated yttria-stabilized zirconia (cer.face®14) surface was characterized by scanning electron microscopy and energy dispersive X-ray. In vitro studies with human MG-63 osteoblasts focused on cell attachment and intracellular stress level. The cer.face 14 surface featured a landscape with nano-micro hills that was most sinusoidal-shaped. The mildly curved profile proved to be a suitable material for cell anchorage. MG-63 cells on cer.face 14 showed a very low reactive oxygen species (ROS) generation similar to that on the extracellular matrix protein collagen I (Col). Intracellular adenosine triphosphate (ATP) levels were comparable to Col. Ceramic cer.face 14, with its sinusoidal-shaped surface structure, facilitates cell anchorage and prevents cell stress.
RESUMEN
Electrostatic forces at the cell interface affect the nature of cell adhesion and function; but there is still limited knowledge about the impact of positive or negative surface charges on cell-material interactions in regenerative medicine. Titanium surfaces with a variety of zeta potentials between -90 mV and +50 mV were generated by functionalizing them with amino polymers, extracellular matrix proteins/peptide motifs and polyelectrolyte multilayers. A significant enhancement of intracellular calcium mobilization was achieved on surfaces with a moderately positive (+1 to +10 mV) compared with a negative zeta potential (-90 to -3 mV). Dramatic losses of cell activity (membrane integrity, viability, proliferation, calcium mobilization) were observed on surfaces with a highly positive zeta potential (+50 mV). This systematic study indicates that cells do not prefer positive charges in general, merely moderately positive ones. The cell behavior of MG-63s could be correlated with the materials' zeta potential; but not with water contact angle or surface free energy. Our findings present new insights and provide an essential knowledge for future applications in dental and orthopedic surgery.
RESUMEN
Plasma-polymerized allylamine (PPAAm) coatings of titanium enhance the cell behavior of osteoblasts. The purpose of the present study was to evaluate a PPAAm nanolayer on zirconia after a storage period of 5 years. Zirconia specimens were directly coated with PPAAm (ZA0) or stored in aseptic packages at room temperature for 5 years (ZA5). Uncoated zirconia specimens (Zmt) and the micro-structured endosseous surface of a zirconia implant (Z14) served as controls. The elemental compositions of the PPAAm coatings were characterized and the viability, spreading and gene expression of human osteoblastic cells (MG-63) were assessed. The presence of amino groups in the PPAAm layer was significantly decreased after 5 years due to oxidation processes. Cell viability after 24 h was significantly higher on uncoated specimens (Zmt) than on all other surfaces. Cell spreading after 20 min was significantly higher for Zmt = ZA0 > ZA5 > Z14, while, after 24 h, spreading also varied significantly between Zmt > ZA0 > ZA5 > Z14. The expression of the mRNA differentiation markers collagen I and osteocalcin was upregulated on untreated surfaces Z14 and Zmt when compared to the PPAAm specimens. Due to the high biocompatibility of zirconia itself, a PPAAm coating may not additionally improve cell behavior.
RESUMEN
The physico-chemical surface design of implants influences the surrounding cells. Osteoblasts on sharp-edged micro-topographies revealed an impaired cell phenotype, function and Ca2+ mobilization. The influence of edges and ridges on the Wnt/ß-catenin pathway in combination with the cells' stress response has not been clear. Therefore, MG-63 osteoblasts were studied on defined titanium-coated micro-pillars (5 × 5 × 5 µm) in vitro and in silico. MG-63s on micro-pillars indicated an activated state of the Wnt/ß-catenin pathway. The ß-catenin protein accumulated in the cytosol and translocated into the nucleus. Gene profiling indicated an antagonism mechanism of the transcriptional activity of ß-catenin due to an increased expression of inhibitors like ICAT (inhibitor of ß-catenin and transcription factor-4). Cells on pillars produced a significant reactive oxygen species (ROS) amount after 1 and 24 h. In silico analyses provided a detailed view on how transcriptional activity of Wnt signaling is coordinated in response to the oxidative stress induced by the micro-topography. Based on a coordinated expression of regulatory elements of the Wnt/ß-catenin pathway, MG-63s are able to cope with an increased accumulation of ß-catenin on micro-pillars and suppress an unintended target gene expression. Further, ß-catenin may be diverted into other signaling pathways to support defense mechanisms against ROS.
Asunto(s)
Especies Reactivas de Oxígeno/metabolismo , Vía de Señalización Wnt/genética , beta Catenina/metabolismo , Simulación por Computador , Humanos , Técnicas In VitroRESUMEN
OBJECTIVES: Different approaches are currently undertaken to structure the endosseous part of zirconia implants. The purpose of the present study was to evaluate how surface roughness and monoclinic to tetragonal phase ratio of zirconia affect cell behavior of human osteoblasts. METHODS: Zirconia discs with five different surface structures were produced: machined; machined heat-treated; polished; polished heat-treated; sandblasted, etched and heat-treated (cer.face 14, vitaclinical). The specimen surfaces were then characterized in terms of monoclinic to tetragonal phase ratio, wettability, roughness and visualized using scanning electron microscopy. To determine the reaction of the human osteoblastic cells (MG-63) to the surface roughness and monoclinic to tetragonal phase ratio of zirconia, cell spreading, morphology, actin cytoskeleton, viability and gene expression of alkaline phosphatase (ALP), collagen type I (COL) and osteocalcin (OCN) were assessed. RESULTS: Heat-treatment of the specimens significantly improved the surface wettability. With increased surface roughness Ra of the specimens, cell spreading was reduced. Cell viability after 24h correlated linearly with the tetragonal phase ratio of the specimens. Gene expression after 24h and 3 d was comparable on all specimens irrespective their surface roughness or monoclinic to tetragonal phase ratio. SIGNIFICANCE: Smooth zirconia surfaces with a high tetragonal phase ratio revealed best surface conditions for MG-63 osteoblastic cells and may be considered to design the endosseous part of zirconia implants.
Asunto(s)
Osteoblastos , Circonio , Humanos , Ensayo de Materiales , Microscopía Electrónica de Rastreo , Propiedades de SuperficieRESUMEN
Encrustations of ureteral stents are one of the biggest problems with urological implants. Crystalline biofilms can occur alone or in combination with bacterial biofilms. To identify which surface parameters provide guidance for the development of novel stent materials, we used an in vitro encrustation system. Synthetic urine with increasing pH to simulate an infection situation was pumped over the polymer samples with adjusted flow rates at 37 °C to mimic the native body urine flow. Chemical surface features (contact angle, surface charge), as well as encrustations were characterized. The encrustations on the materials were analyzed quantitatively (dry mass) and qualitatively using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and Fourier transform infrared spectroscopy (FTIR). The aim of this comparative study was to identify crucial surface parameters that might predict the quantity and type of mineral deposits in vitro and provide guidance for the development and screening of new polymer-based biomaterials for ureteral stent design. For the first time, we could identify that, within the range of our polymers, those materials with a slight hydrophilicity and a strong negative zeta potential (around -60 mV) were most favorable for use as ureteral stent materials, as the deposition of crystalline biofilms was minimized.
RESUMEN
Recently, the potential use of cold atmospheric pressure plasma (CAP) in cancer treatment has gained increasing interest. Especially the enhanced selective killing of tumor cells compared to normal cells has prompted researchers to elucidate the molecular mechanisms for the efficacy of CAP in cancer treatment. This review summarizes the current understanding of how CAP triggers intracellular pathways that induce growth inhibition or cell death. We discuss what factors may contribute to the potential selectivity of CAP towards cancer cells compared to their non-malignant counterparts. Furthermore, the potential of CAP to trigger an immune response is briefly discussed. Finally, this overview demonstrates how these concepts bear first fruits in clinical applications applying CAP treatment in head and neck squamous cell cancer as well as actinic keratosis. Although significant progress towards understanding the underlying mechanisms regarding the efficacy of CAP in cancer treatment has been made, much still needs to be done with respect to different treatment conditions and comparison of malignant and non-malignant cells of the same cell type and same donor. Furthermore, clinical pilot studies and the assessment of systemic effects will be of tremendous importance towards bringing this innovative technology into clinical practice.
RESUMEN
Nano- and microstructured titanium surfaces have recently attracted attention in the field of regenerative medicine because of the influence which surface characteristics such as roughness and wettability can have on cellular processes. This study focuses on the correlation of surface properties (wettability and nano/micro texture) of laser-structured Ti6Al4V samples with pronounced cell adhesion. Samples were structured with multiple laser parameters in order to create a range of surface properties. Surface characterization was performed by contact angle measurements 1 and 7 days after laser processing. The arithmetic mean roughness of the material surface in an area (Sa) was determined by means of confocal laser scanning microscopy (CLSM). Immediately after wettability tests of the laser-structured surfaces, in vitro experiments with human MG-63 osteoblasts were carried out. For this purpose, the cell morphology and actin cytoskeleton organization were analyzed using CLSM and scanning electron microscopy. On rough microstructures with deep cavities, the cell growth and spreading were inhibited. An improved cellular adhesion and growth on nanostructured and sinusoidal microstructured surfaces could be demonstrated, regardless of hydrophilicity of the surfaces.
RESUMEN
Biomaterials should be bioactive in stimulating the surrounding tissue to accelerate the ingrowth of permanent implants. Chemical and topographical features of the biomaterial surface affect cell physiology at the interface. A frequently asked question is whether the chemistry or the topography dominates the cell-material interaction. Recently, we demonstrated that a plasma-chemical modification using allylamine as a precursor was able to boost not only cell attachment and cell migration, but also intracellular signaling in vital cells. This microwave plasma process generated a homogenous nanolayer with randomly distributed, positively charged amino groups. In contrast, the surface of the human osteoblast is negatively charged at -15 mV due to its hyaluronan coat. As a consequence, we assumed that positive charges at the material surface-provoking electrostatic interaction forces-are attractive for the first cell encounter. This plasma-chemical nanocoating can be used for several biomaterials in orthopedic and dental implantology like titanium, titanium alloys, calcium phosphate scaffolds, and polylactide fiber meshes produced by electrospinning. In this regard, we wanted to ascertain whether plasma polymerized allylamine (PPAAm) is also suitable for increasing the attractiveness of a ceramic surface for dental implants using Yttria-stabilized tetragonal zirconia.
RESUMEN
Besides their use for drug and gene delivery, dendrimer molecules are also favorable for the design of new surface coatings for orthopedic and dental implants due to the wide variety of functional terminal groups and their multivalent character. The purpose of this work was to observe how covalently immobilized polyamidoamine (PAMAM) dendrimer molecules with different terminal chemical groups influenced serum protein adsorption and osteoblast behavior. To this end, fifth-generation PAMAM dendrimers were immobilized on silicon surfaces with an anhydride-containing silane coupling agent which results in positively charged terminal NH2-groups. Coatings with a net negative charge were generated by introduction of terminal CO2H- or CH3-groups. Surface characterization was performed by static and dynamic contact angle and zeta potential. The in vitro studies with human MG-63 osteoblastic cells focused on cell adhesion, morphology, cell cycle, apoptosis and actin formation within 24â¯h. This work demonstrated that cell growth was dependent on surface chemistry and correlated strongly with the surface free energy and charge of the material. The positively charged NH2 surface induced tight cell attachment with well-organized actin stress fibers and a well spread morphology. In contrast, CO2H- and CH3-functional groups provoked a decrease in cell adhesion and spreading and indicated higher apoptotic potential, although both were hydrophilic. The knowledge about the cell-material dialogue is of relevance for the development of bioactive implants in regenerative medicine.
Asunto(s)
Dendrímeros/química , Dendrímeros/farmacología , Osteocitos/citología , Poliaminas/química , Poliaminas/farmacología , Citoesqueleto de Actina/efectos de los fármacos , Citoesqueleto de Actina/metabolismo , Adsorción , Apoptosis/efectos de los fármacos , Proteínas Sanguíneas/química , Adhesión Celular/efectos de los fármacos , Línea Celular , Proliferación Celular/efectos de los fármacos , Materiales Biocompatibles Revestidos/farmacología , Humanos , Osteoblastos/citología , Osteoblastos/efectos de los fármacos , Osteocitos/efectos de los fármacos , Silicio/farmacología , Electricidad Estática , Propiedades de Superficie , Agua/químicaRESUMEN
OBJECTIVE: The recently developed bioactive glass PC-XG3, which is suitable to coat zirconia implant surfaces with high adhesion strength may reduce the time of osseointegration and the marginal bone loss following implantation. The glass composition has been previously evaluated for cytotoxicity on fibroblast cells, and will now be used to evaluate the cell behavior of osteoblast cells. METHODS: Three different surface morphologies were created with PC-XG3 on zirconia discs. A clinically tested zirconia implant surface as well as polished and machined zirconia served as a reference. Cell viability after 24 h, cell spreading after 30 min and 24 h and the respective morphology of human osteoblasts using scanning electron microscopy were evaluated. Additionally, the corrosive process of PC-XG3 in cell culture medium up to 7 d was measured. RESULTS: Initial cell behavior of human osteoblasts was not accelerated by the PC-XG3 surface when compared to zirconia. Additionally, it was found that a decreased surface roughness promoted initial cell spreading. Storage in cell culture medium resulted in the accumulation of C and N on the bioglass surface while Mg, Si, K and Ca were decreased and crack formation was observed. SIGNIFICANCE: Since initial spreading quality to a biomaterial is a crucial factor that will determine the subsequent cell function, proliferation, differentiation, and viability it can be assumed that a coating of zirconia implants with this bioactive glass will unlikely reduce osseointegration time.
Asunto(s)
Osteoblastos , Circonio , Proliferación Celular , Humanos , Microscopía Electrónica de Rastreo , Oseointegración , Propiedades de Superficie , TitanioRESUMEN
Biomaterials can cause a chronic local inflammation called foreign body reaction, with formation of foreign body giant cells (FBGC) by monocyte/macrophage fusion. However, FBGC appearance and role for biomaterials with different physicochemical properties are not yet fully understood. This study aimed at examining FBGC and inflammatory cells after intramuscular implantation of poly(l-lactide-co-d/l-lactide) (PLA) as membranes and uncoated electro-spun fiber meshes or meshes with a positively charged plasma-polymer coating into rats. After 7, 14 and 56 days, CD68+ and CD163+ macrophages, T lymphocytes, MHC-II+ cells, FBGC, and nestin-stained tissue area as regeneration marker were morphometrically analyzed. FBGC occurrence was primarily determined by material morphology, as their numbers for meshes were 10-fold higher during acute and 50-fold higher during chronic inflammation than for membranes but comparable between uncoated and coated meshes. CD68+ macrophages decreased around and within meshes, while CD163+ macrophages and MHC-II+ cells increased within meshes. T lymphocytes within meshes were higher for coated meshes, suggesting that the peri-implant tissue immunological response is also influenced by surface chemistry. FBGC were predominantly CD68+ and CD163- , and nestin-stained tissue area was negatively correlated with CD68+ monocytes/macrophages numbers and positively correlated with CD163+ macrophages numbers, highlighting differing roles in FBGC formation and tissue regeneration. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2726-2734, 2018.
Asunto(s)
Células Gigantes de Cuerpo Extraño/patología , Inflamación/etiología , Poliésteres/efectos adversos , Poliésteres/química , Prótesis e Implantes/efectos adversos , Animales , Células Presentadoras de Antígenos/metabolismo , Antígenos CD/metabolismo , Antígenos de Histocompatibilidad Clase II/metabolismo , Inflamación/patología , Macrófagos/metabolismo , Masculino , Ratas Endogámicas Lew , Propiedades de Superficie , Linfocitos T/metabolismoRESUMEN
BACKGROUND: Biomaterial modifications-chemical and topographical-are of particular importance for the integration of materials in biosystems. Cells are known to sense these biomaterial characteristics, but it has remained unclear which physiological processes bio modifications trigger. Hence, the question arises of whether the dynamic of intracellular calcium ions is important for the characterization of the cell-material interaction. In our prior research we could demonstrate that a defined geometrical surface topography affects the cell physiology; this was finally detectable in a reduced intracellular calcium mobilization after the addition of adenosine triphosphate (ATP). RESULTS: This new contribution examines the cell physiology of human osteoblasts concerning the relative cell viability and the calcium ion dynamic on different chemical modifications of silicon-titanium (Ti) substrates. Chemical modifications comprising the coating of Ti surfaces with a plasma polymerized allylamine (PPAAm)-layer or with a thin layer of collagen type-I were compared with a bare Ti substrate as well as tissue culture plastic. For this purpose, the human osteoblasts (MG-63 and primary osteoblasts) were seeded onto the surfaces for 24 h. The relative cell viability was determined by colorimetric measurements of the cell metabolism and relativized to the density of cells quantified using crystal violet staining. The calcium ion dynamic of osteoblasts was evaluated by the calcium imaging analysis of fluo-3 stained vital cells using a confocal laser scanning microscope. The positively charged nano PPAAm-layer resulted in enhanced intracellular calcium ion mobilization after ATP-stimulus and cell viability. This study underlines the importance of the calcium signaling for the manifestation of the cell physiology. CONCLUSIONS: Our current work provides new insights into the intracellular calcium dynamic caused by diverse chemical surface compositions. The calcium ion dynamic appears to be a sensitive parameter for the cell physiology and, thus, may represent a useful approach for evaluating a new biomaterial. In this regard, reliable in vitro-tests of cell behavior at the interface to a material are crucial steps in securing the success of a new biomaterial in medicine.
RESUMEN
The topographical and chemical surface features of biomaterials are sensed by the cells, affecting their physiology at the interface. When placed on titanium, we recently discovered osteoblasts attempted caveolae-mediated phagocytosis of the sharp-edged microstructures. This active, energy-consuming process resulted in decreased osteoblastic cell functions (e.g. secretion of extracellular matrix proteins). However, chemical modification with plasma polymerized allylamine (PPAAm) was able to amplify osteoblast adhesion and spreading, resulting in better implant osseointegration in vivo In the present in vitro study, we analyzed whether this plasma polymer nanocoating is able to attenuate the microtopography-induced changes of osteoblast physiology. On PPAAm, we found cells showed a higher cell interaction with the geometrical micropillars by 30â min, and a less distinct reduction in the mRNA expression of collagen type I, osteocalcin and fibronectin after 24â h of cell growth. Interestingly, the cells were more active and sensitive on PPAAm-coated micropillars, and react with a substantial Ca2+ ion mobilization after stimulation with ATP. These results highlight that it is important for osteoblasts to establish cell surface contact for them to perform their functions.
Asunto(s)
Adhesión Celular , Materiales Biocompatibles Revestidos/química , Proteínas de la Matriz Extracelular/metabolismo , Expresión Génica , Osteoblastos/citología , Alilamina/química , Línea Celular , Colágeno Tipo I/metabolismo , Fibronectinas/metabolismo , Humanos , Osteoblastos/metabolismo , Osteocalcina/metabolismo , Polimerizacion , ARN Mensajero/análisis , Propiedades de Superficie , Titanio/químicaRESUMEN
Topographical material surface features are sensed by cells and provoke a large range of cellular responses. We recognized earlier, that at micropillar topographies in the range of 5 µm, the osteoblasts attempt to phagocytize the pillars resulted in increased energy requirements and reduced osteoblast marker expression, e.g., collagen type I and osteocalcin. However, the precise cellular signaling transducing the topographic information into the cell and evoking phagocytic processes remained unknown. Here, we could show that the RhoA/ROCK signaling is involved in the transduction of the topography-mediated cellular reactions. After inhibition of ROCK-2 with Y27632 for 24 h, no caveolae-mediated micropillar assembly of the cell membrane domain component caveolin-1 (Cav-1) was found. ROCK inhibition was also able to attenuate the pillar-induced decrease in ß-actin. Interestingly, phosphatidylinositol 3-kinase (PI3K) inhibition with LY294002 for 24 h did not influence the Cav-1 clustering on micropillars. Our results illustrate the importance of the integrin down-stream signaling of RhoA/ROCK in the recognition of and adaption to surface microtopographies by osteoblasts and extend our understanding about the complex mechanism of action inside the cells.
Asunto(s)
Comunicación Celular/fisiología , Mecanotransducción Celular/fisiología , Nanoestructuras/química , Osteoblastos/fisiología , Andamios del Tejido/química , Adhesión Celular/fisiología , Células Cultivadas , Humanos , Osteoblastos/citología , Osteoblastos/metabolismo , Transducción de Señal/fisiología , Propiedades de Superficie , Quinasas Asociadas a rho/metabolismo , Quinasas Asociadas a rho/fisiología , Proteína de Unión al GTP rhoA/metabolismo , Proteína de Unión al GTP rhoA/fisiologíaRESUMEN
Copper (Cu) could be suitable to create anti-infective implants based on Titanium (Ti), for example by incorporating Cu into the implant surface using plasma immersion ion implantation (Cu-PIII). The cytotoxicity of Cu might be circumvented by an additional cell-adhesive plasma polymerized allylamine film (PPAAm). Thus, this study aimed to examine in vivo local inflammatory reactions for Ti6Al4V implants treated with Cu-PIII (Ti-Cu), alone or with an additional PPAAm film (Ti-Cu-PPAAm), compared to untreated implants (Ti). Successful Cu-PIII and PPAAm treatment was confirmed with X-ray Photoelectron Spectroscopy. Storage of Ti-Cu and Ti-Cu-PPAAm samples in double-distilled water for five days revealed a reduction of Cu release by PPAAm. Subsequently, Ti, Ti-Cu and Ti-Cu-PPAAm samples were simultaneously implanted into the neck musculature of 24 rats. After 7, 14 and 56 days, peri-implant tissue was retrieved from 8 rats/day for morphometric immunohistochemistry of different inflammatory cells. On day 56, Ti-Cu induced significantly stronger reactions compared to Ti (tissue macrophages, antigen-presenting cells, T lymphocytes) and to Ti-Cu-PPAAm (tissue macrophages, T lymphocytes, mast cells). The response for Ti-Cu-PPAAm was comparable with Ti. In conclusion, PPAAm reduced the inflammatory reactions caused by Cu-PIII. Combining both plasma processes could be useful to create antibacterial and tissue compatible Ti-based implants.
RESUMEN
AIM: To investigate osteoconductive and antimicrobial properties of a titanium-copper-nitride (TiCuN) film and an additional BONIT® coating on titanium substrates. METHODS: For micro-structuring, the surface of titanium test samples was modified by titanium plasma spray (TPS). On the TPS-coated samples, the TiCuN layer was deposited by physical vapor deposition. The BONIT® layer was coated electrochemically. The concentration of copper ions released from TiCuN films was measured by atomic absorption spectrometry. MG-63 osteoblasts on TiCuN and BONIT® were analyzed for cell adhesion, viability and spreading. In parallel, Staphylococcus epidermidis (S. epidermidis) were cultivated on the samples and planktonic and biofilm-bound bacteria were quantified by counting of the colony-forming units. RESULTS: Field emission scanning electron microscopy (FESEM) revealed rough surfaces for TPS and TiCuN and a special crystalline surface structure on TiCuN + BONIT®. TiCuN released high amounts of copper quickly within 24 h. These release dynamics were accompanied by complete growth inhibition of bacteria and after 2 d, no planktonic or adherent S. epidermidis were found on these samples. On the other hand viability of MG-63 cells was impaired during direct cultivation on the samples within 24 h. However, high cell colonization could be found after a 24 h pre-incubation step in cell culture medium simulating the in vivo dynamics closer. On pre-incubated TiCuN, the osteoblasts span the ridges and demonstrate a flattened, well-spread phenotype. The additional BONIT®coating reduced the copper release of the TiCuN layer significantly and showed a positive effect on the initial cell adhesion. CONCLUSION: The TiCuNcoating inhibits the formation of bacterial biofilms on orthopedic implants by influencing the "race for the surface" to the advantage of osteoblasts.