RESUMEN
Polyolefins such as polyethylenes and polypropylenes are the most-produced plastic waste globally, yet are difficult to convert into useful products due to their unreactivity. Pyrolysis is a practical method for large-scale treatment of mixed, contaminated plastic, allowing for their conversion into industrially-relevant petrochemicals. Metal-organic frameworks (MOFs), despite their tremendous utility in heterogenous catalysis, have been overlooked for polyolefin depolymerization due to their perceived thermal instabilities and inability of polyethylenes and polypropylenes to penetrate their pores. Herein, we demonstrate the viability of UiO-66 MOFs containing coordinatively-unsaturated zirconia nodes, as effective catalysts for pyrolysis that significantly enhances the yields of valuable liquid and gas hydrocarbons, whilst halving the amounts of residual solids produced. Reactions occur on the Lewis-acidic UiO-66 zirconia nodes, without the need for noble metals, and yields aliphatic product distributions distinctly different from the aromatic-rich hydrocarbons from zeolite catalysis. We also demonstrate the first unambiguous characterization of polyolefin penetration into UiO-66 pores at pyrolytic temperatures, allowing access to the abundant Zr-oxo nodes within the MOF interior for efficient C-C cleavage. Our work highlights the potential of MOFs as highly-designable heterogeneous catalysts for depolymerization of plastics which can complement conventional catalysts in reactivity.
RESUMEN
Polymer-based organic cathode materials have shown immense promise for lithium storage, owing to their structural diversity and functional group tunability. However, designing appropriate high-performance cathode materials with a high-rate capability and long cycle life remains a significant challenge. It is quintessential to design polymer-based electrodes with lithiophilic linkages. Herein, we design a bifurcated dibenzamide (DBA) linkage having lithiophilic functionalities. 1H NMR has been used as an experimental tool to understand the lithiophilic nature of the DBAs. Considering the strong Li+ affinity of DBAs, a series of polybenzamides have been designed as lithium storage systems. The design of porous polybenzamides consists of amides as only redox-active functionalities, and the rest are inactive phenyl units. Porous polybenzamides, when tested as cathodes against a Li-metal anode, displayed high capacity and rate performance, demonstrating their redox activity. The most efficient polybenzamide (TAm-TA) delivered a specific capacity of 248 mA h g-1 at 1C. TAm-TA retained 63% of its specific capacity at a very high rate of 10C (157 mA h g-1). Notably, polybenzamides displayed a capacity enhancement during long cycling, tending to achieve their theoretical capacity. Long cycling stability tests over 3000 cycles at a rate of 1.3C and over 6000 cycles at elevated rates (5C to 40C) demonstrate the electrochemical robustness of dibenzamide linkages. Finally, two full-cell experiments using TAm-TA as both cathode and anode were conducted, which delivered high capacity, demonstrating that TAm-TA is a promising candidate for Li+-ion batteries (LIBs). Furthermore, the ex situ Fourier transform infrared (FT-IR), X-ray photoemission spectroscopy (XPS), and density functional theory (DFT) studies revealed the stepwise lithiation/delithiation mechanism for polybenzamides.
RESUMEN
Dabrafenib (DBF), an anticancer drug, exhibits isostructural properties in its hydrate (DBFâH2O) and perhydrate (DBFâH2O2) forms, as revealed by single-crystal X-ray diffraction. Despite the H2O and H2O2 solvent molecules occupying identical locations, the two polymorphs have different thermal behaviors. In general, determination of stoichiometry of H2O in the perhydrate crystals is difficult due to the presence of both H2O and H2O2 in the same crystal voids. This study utilizes magic-angle spinning (MAS) solid-state NMR (SSNMR) combined with gauge-included projector augmented wave calculations to characterize the influence of solvent molecules on the local environment in pseudopolymorphs. SSNMR experiments were employed to assign 1H, 13C, and 15N peaks and identify spectral differences in the isostructural pseudopolymorphs. Proton spectroscopy at fast MAS was used to identify and quantify H2O2/H2O in DBFâH2O2 (mixed hydrate/perhydrate). 1H-1H dipolar-coupling-based experiments were recruited to confirm the 3D molecular packing of solvent molecules in DBFâH2O and DBFâH2O2. Homonuclear (1H-1H) and heteronuclear (1H-14N) distance measurements, in conjunction with diffraction structures and optimized hydrogen atom positions by density functional theory, helped decipher local interactions of H2O2 with DBF and their geometry in DBFâH2O2. This integrated X-ray structure, quantum chemical calculations, and NMR study of pseudopolymorphs offer a practical approach to scrutinizing crystallized solvent interactions in the crystal lattice even without high-resolution crystal structures or artificial sample enrichment.
RESUMEN
High isotropic resolution is essential for the structural elucidation of samples with multiple sites. In this study, utilizing the benefits of TRAPDOR-based heteronuclear multiple quantum coherence (T-HMQC) and a pair of one rotor period long cosine amplitude modulated low-power (cos-lp) pulse-based symmetric-split-t1 multiple-quantum magic angle spinning (MQMAS) methods, we have developed a proton-detected 2D 35Cl/1H T-HMQC-MQMAS pulse sequence under fast MAS (70 kHz) to achieve high-resolution in the indirect dimension of the spin-3/2 (35Cl) nuclei connected via protons. As T-HMQC polarizes not only single-quantum central transition (SQCT) but also triple-quantum (TQ) coherences, the proposed 2D pulse sequence is implemented via selection of two coherence pathways (SQCTâTQ âSQCT and TQ â SQCTâTQ) resulting in the 35Cl isotropic dimension and is superior to the existing double-quantum satellite-transition (DQST) T-HMQC in terms of resolution.
Asunto(s)
Resonancia Magnética Nuclear Biomolecular , Teoría CuánticaRESUMEN
Developing highly stable porous coordination polymers (PCPs) with integrated electrical conductivity is crucial for advancing our understanding of electrocatalytic mechanisms and the structure-activity relationship of electrocatalysts. However, achieving this goal remains a formidable challenge because of the electrochemical instability observed in most PCPs. Herein, we develop a "modular design" strategy to construct electrochemically stable semiconducting PCP, namely, Fe-pyNDI, which incorporates a chain-type Fe-pyrazole metal cluster and π-stacking column with effective synergistic effects. The three-dimensional electron diffraction (3D ED) technique resolves the precise structure. Both theoretical and experimental investigation confirms that the π-stacking column in Fe-pyNDI can provide an efficient electron transport path and enhance the structural stability of the material. As a result, Fe-pyNDI can serve as an efficient model electrocatalyst for nitrate reduction reaction (NO3RR) to ammonia with a superior ammonia yield of 339.2â µmol h-1 cm-2 (14677â µgâ h-1 mgcat. -1) and a faradaic efficiency of 87 % at neutral electrolyte, which is comparable to state-of-the-art electrocatalysts. The in-situ X-ray absorption spectroscopy (XAS) reveals that during the reaction, the structure of Fe-pyNDI can be kept, while part of the Fe3+ in Fe-pyNDI was reduced in situ to Fe2+, which serves as the potential active species for NO3RR.
RESUMEN
The development of NMR crystallography methods requires a reliable database of chemical shifts measured for systems with known crystal structure. We measured and assigned carbon and hydrogen chemical shifts of twenty solid natural amino acids of known polymorphic structure, meticulously determined using powder X-ray diffraction. We then correlated the experimental data with DFT-calculated isotropic shieldings. The small size of the unit cell of most amino acids allowed for advanced computations using various families of DFT functionals, including generalized gradient approximation (GGA), meta-GGA and hybrid DFT functionals. We tested several combinations of functionals for geometry optimizations and NMR calculations. For carbon shieldings, the widely used GGA functional PBE performed very well, although an improvement could be achieved by adding shielding corrections calculated for isolated molecules using a hybrid functional. For hydrogen nuclei, we observed the best performance for NMR calculations carried out with structures optimized at the hybrid DFT level. The high fidelity of the calculations made it possible to assign additional signals that could not be assigned based on experiments alone, for example signals of two non-equivalent molecules in the unit cell of some of the amino acids.
Asunto(s)
Aminoácidos , Carbono , Cristalografía , Espectroscopía de Resonancia Magnética/métodos , HidrógenoRESUMEN
ß-Keto-enamine-linked 2D covalent organic frameworks (COFs) have emerged as highly robust materials, showing significant potential for practical applications. However, the exclusive reliance on 1,3,5-triformylphloroglucinol (Tp aldehyde) in the design of such COFs often results in the production of non-porous amorphous polymers when combined with certain amine building blocks. Attempts to adjust the crystallinity and porosity by a modulator approach are inefficient because Tp aldehyde readily forms stable ß-keto-enamine-linked monomers/oligomers with various aromatic amines through an irreversible keto-enol tautomerization process. Our research employed a unique protection-deprotection strategy to enhance the crystallinity and porosity of ß-keto-enamine-linked squaramide-based 2D COFs. Advanced solid-state NMR studies, including 1D 13 C CPMAS, 1 H fast MAS, 15 N CPMAS, 2D 13 C-1 H correlation, 1 H-1 H DQ-SQ, and 14 N-1 H HMQC NMR were used to establish the atomic-level connectivity within the resultant COFs. The TpOMe -Sqm COFs synthesized utilizing this strategy have a surface area of 487â m2 g-1 , significantly higher than similar COFs synthesized using Tp aldehyde. Furthermore, detailed time-dependent PXRD, solid-state 13 C CPMAS NMR, and theoretical DFT studies shed more light on the crystallization and linkage conversion processes in these 2D COFs. Ultimately, we applied this protection-deprotection method to construct novel keto-enamine-linked highly porous organic polymers with a surface area of 1018â m2 g-1 .
RESUMEN
The development of synthetic routes for the formation of robust porous organic polymers (POPs) with well-defined nanoscale morphology is fundamentally significant for their practical applications. The thermodynamic characteristics that arise from reversible covalent bonding impart intrinsic chemical instability in the polymers, thereby impeding their overall potential. Herein, a unique strategy is reported to overcome the stability issue by designing robust imidazole-linked POPs via tandem reversible/irreversible bond formation. Incorporating inherent rigidity into the secondary building units leads to robust microporous polymeric nanostructures with hollow-spherical morphologies. An in-depth analysis by extensive solid-state NMR (1D and 2D) study on 1H, 13C, and 14N nuclei elucidates the bonding and reveals the high purity of the newly designed imidazole-based POPs. The nitrogen-rich polymeric nanostructures are further used as metal-free electrocatalysts for water splitting. In particular, the rigid POPs show excellent catalytic activity toward the oxygen evolution reaction (OER) with long-term durability. Among them, the most efficient OER electrocatalyst (TAT-TFBE) requires 314 mV of overpotential to drive 10 mA cm-2 current density, demonstrating its superiority over state-of-the-art catalysts (RuO2 and IrO2).
RESUMEN
To investigate potential applications of the 3,3'-dihydroxy-2,2'-biindan-1,1'-dione (BIT) structure as an organic semiconductor with intramolecular hydrogen bonds, a new synthetic route under mild conditions is developed based on the addition reaction of 1,3-dione to ninhydrin and the subsequent hydrogenation of the hydroxyl group. This route affords several new BIT derivatives, including asymmetrically substituted structures that are difficult to access by conventional high-temperature synthesis. The BIT derivatives exhibit rapid tautomerization by intramolecular double proton transfer in solution. The tautomerizations are also observed in the solid state by variable temperature measurements of X-ray diffractometry and magic angle spinning 13C solid-state NMR. Possible interplay between the double proton transfer and the charge transport is suggested by quantum chemical calculations. The monoalkylated BIT derivative with a lamellar packing structure suitable for lateral charge transport in films shows a hole mobility of up to 0.012 cm2 V-1 s-1 with a weak temperature dependence in an organic field effect transistor.
RESUMEN
Organic ionic plastic crystals (OIPCs) are a ductile soft material where the composing ions are in isotropic free rotation, while their positions are aligned in order. The rotational motion in its plastic phase promotes ion conduction by decreasing the activation energy. Here, we report novel OIPCs comprised of tetracyanoborate ([TCB]-) and various organic cations. In particular, the OIPC composed of [TCB]- and spiro-(1,1')-bipyrrolidinium ([spiropyr]+) cations can transform into its plastic phase at ultralow temperature (Tp = -55 °C) while maintaining a high melting point (Tm = 242 °C). Replacement of the cation with either tetraalkylammonium or phosphonium and comparing their phase behavior, the high Tm was attributed to the relatively small interionic distance between [spiropyr]+ and [TCB]-. At the same time, the low Tp was realized by the restricted vibrational mode of the spirostructure, allowing the initiation of isotropic rotational motion with less thermal energy input.
RESUMEN
The conversion of CO2 to a sole carbonaceous product using photocatalysis is a sustainable solution for alleviating the increasing levels of CO2 emissions and reducing our dependence on nonrenewable resources such as fossil fuels. However, developing a photoactive, metal-free catalyst that is highly selective and efficient in the CO2 reduction reaction (CO2RR) without the need for sacrificial agents, cocatalysts, and photosensitizers is challenging. Furthermore, due to the poor solubility of CO2 in water and the kinetically and thermodynamically favored hydrogen evolution reaction (HER), designing a highly selective photocatalyst is challenging. Here, we propose a molecular engineering approach to design a photoactive polymer with high CO2 permeability and low water diffusivity, promoting the mass transfer of CO2 while suppressing HER. We have incorporated a contorted triptycene scaffold with "internal molecular free volume (IMFV)" to enhance gas permeability to the active site by creating molecular channels through the inefficient packing of polymer chains. Additionally, we introduced a pyrene moiety to promote visible-light harvesting capability and charge separation. By leveraging these qualities, the polymer exhibited a high CO generation rate of 77.8 µmol g-1 h-1, with a high selectivity of â¼98% and good recyclability. The importance of IMFV was highlighted by replacing the contorted triptycene unit with a planar scaffold, which led to a selectivity reversal favoring HER over CO2RR in water. In situ electron paramagnetic resonance (EPR), time-resolved photoluminescence spectroscopy (TRPL), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) techniques, further supported by theoretical calculations, were employed to enlighten the mechanistic insight for metal-free CO2 reduction to exclusively CO in water.
RESUMEN
Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO2 molecules as a precursor. The mass ratio of CO2 conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO2 and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO2 -derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer-Emmett-Teller surface area of 945â m2 g-1 and high stability against strong acid (6â M HCl), base (6â M NaOH), and boiling water over 24â hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10-2 â S cm-1 at 85 °C, 95 % of relative humidity.
RESUMEN
Metal-organic frameworks (MOFs) are potential candidates for the platform of the solid acid; however, no MOF has been reported that has both aqueous ammonium stability and a strong acid site. This manuscript reports a highly stable MOF with a cation exchange site synthesized by the reaction between zirconium and mellitic acid under a high concentration of ammonium cations (NH4+). Single-crystal XRD analysis of the MOF revealed the presence of four free carboxyl groups of the mellitic acid ligand, and the high first association constant (pKa1) of one of the carboxyl groups acts as a monovalent ion-exchanging site. NH4+ in the MOF can be reversibly exchanged with proton (H+), sodium (Na+), and potassium (K+) cations in an aqueous solution. Moreover, the uniform nanospace of the MOF provides the acid site for selective NH4+ recovery from the aqueous mixture of NH4+ and Na+, which could solve the global nitrogen cycle problem. The solid acid nature of the MOF also results in the proton conductivity reaching 1.34 × 10-3 S cm-1 at 55 °C by ion exchange from NH4+ to H+.
RESUMEN
Few-layer organic nanosheets are becoming increasingly attractive as two-dimensional (2D) materials due to their precise atomic connectivity and tailor-made pores. However, most strategies for synthesizing nanosheets rely on surface-assisted methods or top-down exfoliation of stacked materials. A bottom-up approach with well-designed building blocks would be the convenient pathway to achieve the bulk-scale synthesis of 2D nanosheets with uniform size and crystallinity. Herein, we have synthesized crystalline covalent organic framework nanosheets (CONs) by reacting tetratopic thianthrene tetraaldehyde (THT) and aliphatic diamines. The bent geometry of thianthrene in THT retards the out-of-plane stacking, while the flexible diamines introduce dynamic characteristics into the framework, facilitating nanosheet formation. Successful isoreticulation with five diamines with two to six carbon chain lengths generalizes the design strategy. Microscopic imaging reveals that the odd and even diamine-based CONs transmute to different nanostructures, such as nanotubes and hollow spheres. The single-crystal X-ray diffraction structure of repeating units indicates that the odd-even linker units of diamines introduce irregular-regular curvature in the backbone, aiding such dimensionality conversion. Theoretical calculations shed more light on nanosheet stacking and rolling behavior with respect to the odd-even effects.
RESUMEN
The mutual orientation of nuclear spin interaction tensors provides critical information on the conformation and arrangement of molecules in chemicals, materials, and biological systems at an atomic level. Proton is a ubiquitous and important element in a variety of substances, and its NMR is highly sensitive due to their virtually 100% natural abundance and large gyromagnetic ratio. Nevertheless, the measurement of mutual orientation between the 1H CSA tensors has remained largely untouched in the past due to strong 1H-1H homonuclear interactions in a dense network of protons. In this study, we have developed a proton-detected 3D 1H CSA/1H CSA/1H CS correlation method that utilizes three techniques to manage homonuclear interactions, namely fast magic-angle spinning, windowless C-symmetry-based CSA recoupling (windowless-ROCSA), and a band-selective 1H-1H polarization transfer. The asymmetric 1H CSA/1H CSA correlated powder patterns produced by the C-symmetry-based methods are highly sensitive to the sign and asymmetry parameter of the 1H CSA, and the Euler angle ß as compared to the symmetric pattern obtained by the existing γ-encoded R-symmetry-based CSA/CSA correlation methods and allows a larger spectral area for data fitting. These features are beneficial for determining the mutual orientation between the nuclear spin interaction tensors with improved accuracy.
Asunto(s)
Imagen por Resonancia Magnética , Protones , Espectroscopía de Resonancia Magnética/métodosRESUMEN
The hyperpolarization of biomolecules at room temperature could facilitate highly sensitive magnetic resonance imaging for metabolic studies and nuclear magnetic resonance (NMR)-based screenings for drug discovery. In this study, we demonstrate the hyperpolarization of biomolecules in eutectic crystals using photoexcited triplet electrons at room temperature. Eutectic crystals composed of the domains of benzoic acid doped with the polarization source and analyte domains were prepared using a melting-quenching process. Spin diffusion between the benzoic acid and analyte domain was elucidated using solid-state NMR analysis, indicating that hyperpolarization was transferred from the domain of benzoic acid to the domain of the analyte.
RESUMEN
In this work, we have proposed a proton-detected three-dimensional (3D) 15N-1H dipolar coupling (DIP)/1H chemical shift anisotropy (CSA)/1H chemical shift (CS) correlation experiment to measure the relative orientation between the 15N-1H dipolar coupling and the 1H CSA tensors under fast magic angle spinning (MAS) solid-state NMR. In the 3D correlation experiment, the 15N-1H dipolar coupling and 1H CSA tensors are recoupled using our recently developed windowless C-symmetry-based C331-ROCSA (recoupling of chemical shift anisotropy) DIPSHIFT and C331-ROCSA pulse-based methods, respectively. The 2D 15N-1H DIP/1H CSA powder lineshapes extracted using the proposed 3D correlation method are shown to be sensitive to the sign and asymmetry of the 1H CSA tensor, a feature that allows the determination of the relative orientation between the two correlating tensors with improved accuracy. The experimental method developed in this study is demonstrated on a powdered U-15N L-Histidine.HCl·H2O sample.
RESUMEN
Covalent organic nanotubes (CONTs) are porous one-dimensional frameworks connected through imine bonds via Schiff base condensation between aldehydes and amines. The presence of two amine groups at the ortho position in the structurally demanding tetraaminotriptycene (TAT) building block leads to multiple reaction pathways between the ditopic aldehyde and the tetratopic amine. We have synthesized five different monomers of CONT-1 by the Schiff base condensation reaction between TAT and o-anisaldehyde. The conversion of imine to imidazole bonding in a monomer is probed using NMR, mass spectrometry, and X-ray diffraction techniques. Solid-state NMR provide insights into the CONTs' structural connectivity. A theoretical investigation suggests that the π-π stacking could be the driving force for rapid imine to imidazole conversion within the CONT-1. Microscopic imaging sheds further light on the self-assembly process of the CONTs, indicating both head-to-head and side-by-side assembly.
RESUMEN
1H-14N internuclear distances are readily and accurately measured using the symmetry-based phase-modulated resonance-echo saturation-pulse double-resonance (PM-S-RESPDOR) method in rigid solids. The fraction curve, (S0 - S')/S0, is represented by a single variable of a 1H-14N heteronuclear dipolar coupling, where S0 and S' are the PM-S-RESPDOR signal intensity with and without 14N PM saturation pulse, respectively. Analytical equation of the fraction curve easily provides 1H-14N couplings. This treatment is only applicable when NH proton resonance is well separated from the other proton peaks. With the limited 1H resolution even at fast MAS > 60 kHz, unfortunately, this condition is not necessarily satisfied especially in multi-component systems which often appear in pharmaceutical applications. To overcome this problem, T-HMQC filtering is applied to suppress the 1H signals other than NH proton prior to the PM-S-RESPDOR experiments. The method is well demonstrated on two components acetaminophen-oxalic acid (APAP-OXA) systems. Further analysis of orientation dependence of T-HMQC and PM-S-RESPDOR shows that the analytical equation can be safely applied in the analysis of T-HMQC filtered PM-S-RESPDOR experiments.