RESUMEN
A comprehensive life cycle assessment (LCA) was conducted for the matchsticks industry in the Khyber Pakhtunkhwa province of Pakistan to quantify environmental footprint, water footprint, cumulative energy use, and to identify improvement opportunities in the matchsticks manufacturing process. One carton of matchsticks was used as reference unit for this study. Foreground data was collected from the matchsticks industry through questionnaire surveys, personal meetings, and field measurements. The collected data was transformed into potential environmental impacts through the Centre for Environment Studies (CML) 2000 v.2.05 method present by default in the SimaPro v.9.1 software. Water footprint was calculated using methodology developed by Hoekstra et al., 2012 (water scarcity index) V1.02 and cumulative energy demand by SimaPro v.9.1 software. The results showed that transport of primary material (wood logs), sawn wood for matchsticks, red phosphorous, acrylic varnish, and kerosene fuel oil contributed to the overall environmental impacts. Transport of primary materials and sawn timber for matchsticks contributed significantly to abiotic depletion, global warming, eutrophication potential, ozone depletion, corrosion, human toxicity, and aquatic ecotoxicity effects. The total water footprint for manufacturing one carton of matchsticks was 0.265332 m3, whereas the total cumulative energy demand was 715.860 Mega Joules (MJ), mainly sourced from non-renewable fossil fuels (708.979 MJ). Scenario analysis was also conducted for 20% and 30% reduction in the primary material distance covered by trucks and revealed that reducing direct material transport distances could diminish environmental impacts and energy consumption. Therefore, environmental footprint could be minimized through diverting matchsticks industries freight from indigenous routes to high mobility highways and by promoting industrial forestry close to industrial zones in Pakistan. Many industries did not have emissions control systems, exceeding the permissible limit for emissions established by the National Environmental Quality Standards (NEQS) of Pakistan. Thus, installation of emissions control system could also diminish emissions from match industry in Pakistan.
Asunto(s)
Ambiente , Combustibles Fósiles , Industrias/normas , Agua/química , Eutrofización , Calentamiento Global , Humanos , Pérdida de Ozono , Pakistán , Madera/efectos adversosRESUMEN
Mountain environments in the world host highly specialized flora and fauna which are vulnerable because of land use and climate change. Transhumance and other land use traditional practices are present in most of the mountains of the world, and management tools able to cope with new socioeconomic settings and environmental changes are urgently needed. During past centuries, yak (Bos grunniens) herding in Northern Pakistan involved the migration of herds to high mountain international rangelands, but the recent establishment of international borders breaks the traditional transhumance paths, promoting several ecological problems. In this paper, we propose the use of least cost path (LCP) algorithm to identify the most efficient corridors of transhumance for yak herds on northern high altitudes of Pakistan. Specifically, LCP was implemented to identify the critical grazing areas and the connecting zones to be accounted in a new management plan for the yaks in the region. The LCP analysis showed that some grazing areas are connected with several paths, whereas other areas are connected to a lesser extent. The analyses identified a set of best minimum cost paths able to guarantee local connectivity. We also delineated several medium and low efficient paths that could play a crucial role for maintaining regional connectivity which is essential for reducing the isolation of herds and the consequent inbreeding problems. The analytical framework implemented in this study allowed to (1) provide valuable information concerning the movement of yak herds in Gilgit-Baltistan, (2) identify potential corridors that are able to promote herd movement between villages and high mountain rangelands, and (3) identify critical areas for the connectivity of yaks by ranking of the potential corridors according to their length and permeability. The analysis would be extended to other transhumant herds and high mountain areas that are facing sociopolitical transformations and environmental changes.
Asunto(s)
Altitud , Crianza de Animales Domésticos/métodos , Conservación de los Recursos Naturales/métodos , Monitoreo del Ambiente/métodos , Herbivoria , Crianza de Animales Domésticos/tendencias , Animales , Bovinos , Cambio Climático , Conservación de los Recursos Naturales/tendencias , PakistánRESUMEN
Very old natural forests comprising the species of Fagaceae (Lithocarpus xylocarpus, Castanopsis wattii, Lithocarpus hancei) have been prevailing since years in the Ailaoshan Mountain Nature Reserve (AMNR) SW China. Within these forest trees, density is quite variable. We studied the forest structure, stand dynamics and carbon density at two different sites to know the main factors which drives carbon sequestration process in old forests by considering the following questions: How much is the carbon density in these forest trees of different DBH (diameter at breast height)? How much carbon potential possessed by dominant species of these forests? How vegetation carbon is distributed in these forests? Which species shows high carbon sequestration? What are the physiochemical properties of soil in these forests? Five-year (2005-2010) tree growth data from permanently established plots in the AMNR was analysed for species composition, density, stem diameter (DBH), height and carbon (C) density both in aboveground and belowground vegetation biomass. Our study indicated that among two comparative sites, overall 54 species of 16 different families were present. The stem density, height, C density and soil properties varied significantly with time among the sites showing uneven distribution across the forests. Among the dominant species, L. xylocarpus represents 30% of the total carbon on site 1 while C. wattii represents 50% of the total carbon on site 2. The average C density ranged from 176.35 to 243.97 t C ha-1. The study emphasized that there is generous degree to expand the carbon stocking in this AMNR through scientific management gearing towards conservation of old trees and planting of potentially high carbon sequestering species on good site quality areas.
Asunto(s)
Secuestro de Carbono , Bosques , Biomasa , Carbono/análisis , China , Fagaceae/crecimiento & desarrollo , Tallos de la Planta/crecimiento & desarrollo , Suelo/químicaRESUMEN
Extension of the rotation length in forest management has been highlighted in Article 3.4 of the Kyoto Protocol to help the countries in their commitments for reduction in greenhouse gas emissions. CO2FIX Model Ver.3.2 was used to examine the dynamics of carbon stocks (C stocks) in a rubber plantation in South Western China with the changing rotation lengths. To estimate the efficiency of increasing the rotation length as an Article 3.4 activity, study predicted that the rubber production and C stocks of the ecosystem increased with the increasing rotation (25, 30, 35, 40 and 45 years). While comparing the pace of growth both in economical (rubber production) and ecological (C stocks) terms in each rotation, 40 years rotation length showed maximum production and C stocks. After elongation of 40 year rotation to four consecutive cycles, it was concluded that the total C stocks of the ecosystem were 186.65 Mg ha(-1). The longer rotation lengths showed comparatively increased C stocks in below ground C stock after consecutive four rotations. The pace of C input (Mg C ha(-1) yr(-1)) and rubber production indicated that 40 years rotation is best suited for rubber plantation. The study has developed carbon mitigation based on four rotation scenarios. The possible stimulated increase in C stocks of the entire ecosystem after consecutive long rotations indicated that the emphasis must be paid on deciding the rotation of rubber plantation in SW China for reporting under article 3.4 of the Kyoto Protocol.