Developing Benign Ni/g-C3N4 Catalysts for CO2 Hydrogenation: Activity and Toxicity Study.

This research discusses the CO2 valorization via hydrogenation over the non-noble metal clusters of Ni and Cu supported on graphitic carbon nitride (g-C3N4). The Ni and Cu catalysts were characterized by conventional techniques including XRD, AFM, ATR, Raman imaging, and TPR and were tested via the hydrogenation of CO2 at 1 bar. The transition-metal-based catalyst designed with atom-economy principles presents stable activity and good conversions for the studied processes. At 1 bar, the rise in operating temperature during CO2 hydrogenation increases the CO2 conversion and the selectivity for CO and decreases the selectivity for methanol on Cu/CN catalysts. For the Ni/CN catalyst, the selectivity to light hydrocarbons, such as CH4, also increased with rising temperature. At 623 K, the conversion attained ca. 20%, with CH4 being the primary product of the reaction (CH4 yield >80%). Above 700 K, the Ni/CN activity increases, reaching almost equilibrium values, although the Ni loading in Ni/CN is lower by more than 90% compared to the reference NiREF catalyst. The presented data offer a better understanding of the effect of the transition metals' small metal cluster and their coordination and stabilization within g-C3N4, contributing to the rational hybrid catalyst design with a less-toxic impact on the environment and health. Bare g-C3N4 is shown as a good support candidate for atom-economy-designed catalysts for hydrogenation application. In addition, cytotoxicity to the keratinocyte human HaCaT cell line revealed that low concentrations of catalysts particles (to 6.25 µg mL-1) did not cause degenerative changes.

Surface Chemical and Morphological Analysis of Chitosan/1,3-ß-d-Glucan Polysaccharide Films Cross-Linked at 90 °C.

The cross-linking temperature of polymers may affect the surface characteristics and molecular arrangement, which are responsible for their mechanical and physico-chemical properties. The aim of this research was to determine and explain in detail the mechanism of unit interlinkage of two-component chitosan/1,3-ß-d-glucan matrices gelled at 90 °C. This required identifying functional groups interacting with each other and assessing surface topography providing material chemical composition. For this purpose, various spectroscopic and microscopic approaches, such as attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), were applied. The results indicate the involvement mainly of the C-C and C-H groups and C=O⋯HN moieties in the process of biomaterial polymerization. Strong chemical interactions and ionocovalent bonds between the N-glucosamine moieties of chitosan and 1,3-ß-d-glucan units were demonstrated, which was also reflected in the uniform surface of the sample without segregation. These unique properties, hybrid character and proper cell response may imply the potential application of studied biomaterial as biocompatible scaffolds used in regenerative medicine, especially in bone restoration and/or wound healing.

Copolymers Containing 1-Methyl-2-phenyl-imidazole Moieties as Permanent Dipole Generating Units: Synthesis, Spectroscopic, Electrochemical, and Photovoltaic Properties.

New donor-acceptor conjugated alternating or random copolymers containing 1-methyl-2-phenylbenzimidazole and benzothiadiazole (P1), diketopyrrolopyrrole (P4), or both acceptors (P2) are reported. The specific feature of these copolymers is the presence of a permanent dipole-bearing moiety (1-methyl-2-phenyl imidazole (MPI)) fused with the 1,4-phenylene ring of the polymer main chain. For comparative reasons, polymers of the same main chain but deprived of the MPI group were prepared, namely, P5 with diketopyrrolopyrrole and P3 with both acceptors. The presence of the permanent dipole results in an increase of the optical band gap from 1.51 eV in P3 to 1.57 eV in P2 and from 1.49 eV in P5 to 1.55 eV in P4. It also has a measurable effect on the ionization potential (IP) and electrochemical band gap (EgCV), leading to their decrease from 5.00 and 1.83 eV in P3 to 4.92 and 1.79 eV in P2 as well as from 5.09 and 1.87 eV in P5 to 4.94 and 1.81 eV in P4. Moreover, the presence of permanent dipole lowers the exciton binding energy (Eb) from 0.32 eV in P3 to 0.22 eV in P2 and from 0.38 eV in P5 to 0.26 eV in P4. These dipole-induced changes in the polymer properties should be beneficial for photovoltaic applications. Bulk heterojunction solar cells fabricated from these polymers (with PC71BM acceptor) show low series resistance (rs), indicating good electrical transport properties. The measured power conversion efficiency (PCE) of 0.54% is limited by the unfavorable morphology of the active layer.

Amyloid ß interaction with model cell membranes - What are the toxicity-defining properties of amyloid ß?

Disruption of the neuronal membrane by toxic amyloid ß oligomers is hypothesized to be the major event associated with Alzheimer's disease's neurotoxicity. Misfolding of amyloid ß is followed by aggregation via different pathways in which structurally different amyloid ß oligomers can be formed. The respective toxic actions of these structurally diverse oligomers can vary significantly. Linking a particular toxic action to a structurally unique kind of amyloid ß oligomers and resolving their toxicity-determining feature remains challenging because of their transient stability and heterogeneity. Moreover, the lipids that make up the membrane affect amyloid ß oligomers' behavior, thus adding to the problem's complexity. The present review compares and analyzes the latest results to improve understanding of amyloid ß oligomers' interaction with lipid bilayers.

Variances in the Expression Profile of the EMT-Related Genes in Endometrial Cancer Lines In Vitro Study.

BACKGROUND: The aim of the study was to evaluate the variances in the expression pattern of mRNAs and miRNAs related to the EMT in the Ishikawa (histological grade 1; G1), EC-1A (histological grade 2; G2), and KLE (histological grade 3; G3) cell cultures under cisplatin treatment. METHODS: Endometrial cancer cell lines were exposed to 75.22 mg (an average concentration of the drug used in patients with endometrial cancer) for 12.24 and 48 hours in comparison to the untreated cells (control). The molecular analysis included: extraction of total RNA, microarray analysis (mRNA and miRNA), RTqPCR, and the ELISA assay. RESULTS: Out of 226 mRNAs associated with the EMT, the number of mRNAs differentially expressed in endometrial cancer cell cultures treated with cisplatin compared to a control culture was as follows: Ishikawa line - 87 mRNAs; EC-1A - 84 mRNAs; KLE - 71 mRNAs (p<0.05). The greatest changes in the Ishikawa line treated with the drug compared to the control were noticed for mRNA STAT1 TGFß1, SMAD3, FOXO8, whereas in EC-1A they were mRNA TGFß1, BAMBI, SMAD4, and in KLE mRNA COL1A1, FOXO8, TGFß1. The analysis also showed that miR-106a, miR-30d, miR-300 are common for all cell lines used in this experiment. CONCLUSION: Cisplatin changes the expression profile of genes associated with EMT in endometrial cancer cell lines. It seems that the expression pattern of TGFß1 might be a promising, supplementary molecular marker of the effectiveness of cisplatin therapy. The analysis showed that miR-30d, miR-300, and miR-106a are involved in the regulation of the expression of EMT-related genes.

Expression Pattern of Leptin and Its Receptors in Endometrioid Endometrial Cancer.

The identification of novel molecular markers and the development of cancer treatment strategies are very important as cancer incidence is still very high. Obesity can contribute to cancer progression, including endometrial cancer. Adipocytes secrete leptin, which, when at a high level, is associated with an increased risk of cancer. The aim of this study was to determine the expression profile of leptin-related genes in the endometrial tissue samples and whole blood of patients. The study material included tissue samples and whole blood collected from 30 patients with endometrial cancer and 30 without cancer. Microarrays were used to assess the expression profile of leptin-related genes. Then, the expression of leptin (LEP), leptin receptor (LEPR), leptin receptor overlapping transcript (LEPROT), and leptin receptor overlapping transcript-like 1 (LEPROTL1) was determined by the Real-Time Quantitative Reverse Transcription Reaction (RT-qPCR). The serum leptin concentration was evaluated using Enzyme-linked immunosorbent assay (ELISA). Leptin and its receptors were overexpressed both at the mRNA and protein levels. Furthermore, there were strong positive correlations between leptin levels and patient Body Mass Index (BMI). Elevated levels of leptin and its receptors may potentially contribute to the progression of endometrial cancer. These observations may be useful in designing endometrial cancer treatment strategies.

Interaction of LL-37 human cathelicidin peptide with a model microbial-like lipid membrane.

The only representative of cathelicidin peptides in humans is LL-37, a multifunctional antimicrobial peptide (AMP) that is a part of the innate immune response. Details of the LL-37 direct activity against pathogens are not well understood at the molecular level. Here, we present research on the mechanism of interaction between LL-37 and a model multicomponent bilayer lipid membrane (BLM), mimicking microbial cell membrane. Electrochemical impedance spectroscopy (EIS), high-resolution atomic force microscopy (AFM) imaging, and polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS) were applied to study the peptide influence on a model microbial-like membrane. We show that LL-37 causes changes in the phospholipid molecules conformation and orientation, leading to membrane disintegration, significantly affecting the membrane electrical parameters, such as capacitance and resistance. High-resolution AFM imaging shows topographical and mechanical effects of such disintegration, while PM-IRRAS data indicates that introduction of LL-37 causes changes in the phospholipid acyl chains from all-trans to gauche conformations. Moreover, the presence of LL-37 significantly alters the value of the phospholipid tilt angle. Altogether, our results suggest a "carpet" membrane dissolution followed by a detergent-like membrane disruption mechanism upon LL-37 activity. This research gives a novel insight into the understanding of LL-37 influence on multicomponent model membranes and a promising contribution to the development of LL-37-derived therapeutic agents against drug-resistant bacteria.

Molecular Landscape of the Epithelial-Mesenchymal Transition in Endometrioid Endometrial Cancer.

Modern diagnostics are based on molecular analysis and have been focused on searching for new molecular markers to use in diagnostics. Included in this has been the search for the correlation between gene expression in tissue samples and liquid biological materials. The aim of this study was to evaluate the differences in the expression profile of messenger RNA (mRNA) and micro-RNA (miRNA) related to the epithelial-mesenchymal transition (EMT) in different grades of endometrial cancer (G1-G3), in order to select the most promising molecular markers. The study material consisted of tissue samples and whole blood collected from 30 patients with endometrial cancer (study group; G1 = 15; G2 = 8; G3 = 7) and 30 without neoplastic changes (control group). The molecular analysis included the use of the microarray technique and RTqPCR. Microarray analysis indicated the following number of mRNA differentiating the endometrial cancer samples from the control (tissue/blood): G1 vs. C = 21/18 mRNAs, G2 vs. C = 19/14 mRNAs, and G3 vs. C = 10/9 mRNAs. The common genes for the tissue and blood samples (Fold Change; FC > 3.0) were G1 vs. C: TGFB1, WNT5A, TGFB2, and NOTCH1; G2 vs. C: BCL2L, SOX9, BAMBI, and SMAD4; G3 vs. C STAT1 and TGFB1. In addition, mRNA TGFB1, NOTCH1, and BCL2L are common for all grades of endometrial cancer. The analysis showed that miR-144, miR-106a, and miR-30d are most strongly associated with EMT, making them potential diagnostic markers.

Inhibition of Amyloid ß-Induced Lipid Membrane Permeation and Amyloid ß Aggregation by K162.

Alzheimer's disease (AD) is characterized by progressive neurodegeneration associated with amyloid ß (Aß) peptide aggregation. The aggregation of Aß monomers (AßMs) leads to the formation of Aß oligomers (AßOs), the neurotoxic Aß form, capable of permeating the cell membrane. Here, we investigated the effect of a fluorene-based active drug candidate, named K162, on both Aß aggregation and AßO toxicity toward the bilayer lipid membrane (BLM). Electrochemical impedance spectroscopy (EIS), atomic force microscopy (AFM), and molecular dynamics (MD) were employed to show that K162 inhibits AßOs-induced BLM permeation, thus preserving BLM integrity. In the presence of K162, only shallow defects on the BLM surface were formed. Apparently, K162 modifies Aß aggregation by bypassing the formation of toxic AßOs, and only nontoxic AßMs, dimers (AßDs), and fibrils (AßFs) are produced. Unlike other Aß toxicity inhibitors, K162 preserves neurologically beneficial AßMs. This unique K162 inhibition mechanism provides an alternative AD therapeutic strategy that could be explored in the future.

9,10-Anthraquinones Disubstituted with Linear Alkoxy Groups: Spectroscopy, Electrochemistry, and Peculiarities of Their 2D and 3D Supramolecular Organizations.

Spectroscopic, electrochemical, and structural properties of 2,6-dialkoxy-9,10-anthraquinones (Anth-OCn, n = 4, 6, 8, 10, and 12) of increasing alkoxy substituents length were investigated. UV-vis spectroscopy showed a substitution-induced bathochromic shift of the least energetic band from 325 nm in the case of unsubstituted anthraquinone to ca. 350 nm for the studied derivatives. Similarly as unsubstituted anthraquinone, the studied compound showed two reversible one electron reductions to a radical anion and spinless anions, respectively. The first reduction was affected by electron-donating properties of the substituents, its potential being shifted to ca. -1.5 V (vs Fc/Fc+), i.e., by 80 to 95 mV as compared to the case of unsubstituted anthraquinone. This corresponded to a decrease of |EA| from 3.27 to 3.19-3.17 eV. The experimental spectroscopic and electrochemical data were in full agreement with the DFT calculations. The introduction of the alkoxy substituent improved solution processibility of the studied compounds and facilitated the formation of their ordered supramolecular 2D aggregation on HOPG as well as single crystal growth from solutions. Comparative structural investigations carried out on single crystals and monolayers deposited on HOPG revealed two, mutually related, effects of the substituent length on the resulting supramolecular organization. The first one concerns both the 2D organization in the monolayers and 3D molecular arrangement in crystals: increasing substituent length evolution of the structure occurs from herringbone-type to lamellar. The second effect, observed in monolayers of the derivatives with longer substituents, concerns gradual evolution of their lamellar structures with increasing substituent length. This evolution is induced by the structure of the graphite substrate and involves increasing correlation of the molecules orientation (anthraquinone cores as well as alkoxy substituents) with the symmetry of the graphite substrate. As a result, their 2D and 3D structures become dissimilar.

Effect of Gelation Temperature on the Molecular Structure and Physicochemical Properties of the Curdlan Matrix: Spectroscopic and Microscopic Analyses.

In order to determine the effect of different gelation temperatures (80 °C and 90 °C) on the structural arrangements in 1,3-ß-d-glucan (curdlan) matrices, spectroscopic and microscopic approaches were chosen. Attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) and Raman spectroscopy are well-established techniques that enable the identification of functional groups in organic molecules based on their vibration modes. X-ray photoelectron spectroscopy (XPS) is a quantitative analytical method utilized in the surface study, which provided information about the elemental and chemical composition with high surface sensitivity. Contact angle goniometer was applied to evaluate surface wettability and surface free energy of the matrices. In turn, the surface topography characterization was obtained with the use of atomic force microscopy (AFM) and scanning electron microscopy (SEM). Described techniques may facilitate the optimization, modification, and design of manufacturing processes (such as the temperature of gelation in the case of the studied 1,3-ß-d-glucan) of the organic polysaccharide matrices so as to obtain biomaterials with desired characteristics and wide range of biomedical applications, e.g., entrapment of drugs or production of biomaterials for tissue regeneration. This study shows that the 1,3-ß-d-glucan polymer sample gelled at 80 °C has a distinctly different structure than the matrix gelled at 90 °C.

Spectroscopic studies on the temperature-dependent molecular arrangements in hybrid chitosan/1,3-ß-D-glucan polymeric matrices.

Chitosan/1,3-ß-D-glucan matrices have been recently used in various biomedical applications. Within this study, the structural changes in hybrid polysaccharide chitosan/1,3-ß-D-glucan matrices cross-linked at 70 °C and 80 °C were detected with Attenuated Total Reflection Fourier Transform Infrared spectroscopy (ATR FT-IR) and Raman spectroscopy enabled thorough insights into molecular structure of studied biomaterials, whereas X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) provided their surface characteristics with confirmation of their effective and non-destructive properties. There are temperature-dependent differences in the chemical interactions between 1,3-ß-D-glucan units and N-glucosamine in chitosan, resulting in surface polarity changes. The second order derivatives and deconvolution revealed the alterations in the secondary structure of studied matrices, along with different sized grain-like structures revealed by AFM. Since surface physicochemical properties of biomaterials have great impact on cell behavior, abovementioned techniques may allow to optimize and modify the preparation of polymeric matrices with desired features.

Self-Assembly Properties of Solution Processable, Electroactive Alkoxy, and Alkylthienylene Derivatives of Fused Benzoacridines: A Scanning Tunneling Microscopy Study.

Self-organization in mono- and bilayers on HOPG of two groups of benz[5,6]acridino[2,1,9,8-klmna]acridine derivatives, namely, 8,16-dialkoxybenzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridines with an increasing alkoxy substituent length and 8,16-bis(3- or 4- or 5-octylthiophen-2-yl)benzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridines, i.e., three positional isomers of the same benzoacridine, is investigated by scanning tunneling microscopy. The layers were deposited from a solution of the adsorbate (in hexane or dichloromethane) and imaged ex situ at molecular resolution. In all cases, the resulting two-dimensional (2D) supramolecular organization is governed by the interactions between large, fused heteroaromatic cores that form densely packed rows separated by areas covered by substituents. In 8,16-dialkoxybenzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridines, the alkoxy substituents, separating the rows of densely packed cores, are interdigitated. An increasing substituent length leads to an intuitively expected increase in this 2D unit cell parameter that corresponds to the orientation of the substituent in the monolayer. In the case of 8,16-bis(3- or 4- or 5-octylthiophen-2-yl)benzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridine positional isomers, the self-assembly processes are more complex. Although the determined 2D unit cell is in all cases essentially the same, the role of alkylthienylene substituents in layer formation is distinctly different. Thus, the formation of monolayers and bilayers is very sensitive to isomerism. 8,16-Bis(5-octylthiophen-2-yl)benzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridine is capable of forming the most stable monolayer and the most labile bilayer. In the case of 8,16-bis(3-octylthiophen-2-yl)benzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridine, an inverse phenomenon is observed leading to the most labile monolayer and the most stable bilayer. These differences are rationalized in terms of dissimilar molecular geometries of the studied isomers and different interdigitation patterns in their 2D supramolecular structures.

Size-Dependent Interaction of Amyloid ß Oligomers with Brain Total Lipid Extract Bilayer-Fibrillation Versus Membrane Destruction.

Amyloid ß, Aß(1-42), is a component of senile plaques present in the brain of Alzheimer's disease patients and one of the main suspects responsible for pathological consequences of the disease. Herein, we directly visualize the Aß activity toward a brain-like model membrane and demonstrate that this activity strongly depends on the Aß oligomer size. PeakForce quantitative nanomechanical mapping mode of atomic force microscopy imaging revealed that the interaction of large-size (LS) Aß oligomers, corresponding to high-molecular-weight Aß oligomers, with the brain total lipid extract (BTLE) membrane resulted in accelerated Aß fibrillogenesis on the membrane surface. Importantly, the fibrillogenesis did not affect integrity of the membrane. In contrast, small-size (SS) Aß oligomers, corresponding to low-molecular-weight Aß oligomers, created pores and then disintegrated the BTLE membrane. Both forms of the Aß oligomers changed nanomechanical properties of the membrane by decreasing its Young's modulus by ∼45%. Our results demonstrated that both forms of Aß oligomers induce the neurotoxic effect on the brain cells but their action toward the membrane differs significantly.

Supramolecular organization of liquid-crystal dimers - bis-cyanobiphenyl alkanes on HOPG by scanning tunneling microscopy.

2D supramolecular organization of a series of six cyanobiphenyls bimesogens deposited on highly oriented pyrolytic graphite (HOPG) is studied by scanning tunneling microscopy (STM). The adsorbates are 1,ω-bis(4-cyanobiphenyl-4'-yl)alkanes (CBnCB) with different lengths of their flexible alkyl spacer (containing from 7 to 12 methylene groups). Microscopic investigations at the molecular resolution allow for detailed analysis of the effect of the alkyl spacer length on the type and the extent of the resulting 2D organization. It was demonstrated that bimesogens with shorter spacers (7 and 8 methylene units) organize in a similar manner characterized by the formation of two types of differently ordered monolayers: dense packed, wherein the molecules are oriented in one direction and ordered into parallel rows (layer structure), or less densely packed where they are organized into a chiral windmill-like structure. For derivatives with longer spacers (ranging from 9 to 12 methylene units) the additional effect of parity of carbon atoms in the spacer (even versus odd) is observed. In this range of the spacer lengths even membered bimesogens are also organized in a typical layer structure. However, odd-membered dimers exhibit a much more complex 2D supramolecular organization with a larger unit cell and a helical arrangement of the molecules. Careful comparison of this structure with the 3D structural data derived from the X-ray diffraction investigations of single crystals indicates that for these bimesogens a clear correlation exists between the observed complex 2D supramolecular organization in the monolayer and the organization in one of the crystallographic planes of the 3D nematic twist-bent phase.

Basic issues concerning health-related quality of life.

INTRODUCTION: Chronic diseases such as cancer have a strong influence on both physical health and quality of life, which together comprise the concept of health-related quality of life (HRQoL) - in other words, the complete state of physical, social, and psychological functioning. Herein, we review the literature on the theory of HRQoL in relation to oncological diseases. MATERIAL AND METHODS: A literature search of English-language publications that included an analysis of the conceptual models of HRQoL was performed using PubMed. The data were screened and synthesized by all authors and relevant papers were selected. RESULTS: We outline the theoretical models most often used to conceptualize HRQoL, including the Centre for Health Promotion model from the University of Toronto, the conceptual model of Wilson and Cleary and the contextual model of Ashing-Giwa formulated specifically for cancer patients. CONCLUSIONS: Understanding the theoretical basis of HRQoL is indispensable for valid research in this area.

Influence of the silver deposition method on the activity of platforms for chemometric surface-enhanced Raman scattering measurements: Silver films on ZrO2 nanopore arrays.

Deposition of plazmonic metal nanoparticles on nanostructured oxide templates is an important part in preparation and design of suitable substrates for surface-enhanced Raman scattering (SERS) measurements. In this contribution we analyze the influence of the Ag deposition methods (magnetron sputtering and evaporation in vacuum, which are often used interchangeably) on SERS activity of the resultant Ag-n/ZrO2/Zr composite samples fabricated. We found that deposition of the same amount of Ag (0.020mg/cm2) on the ZrO2 nanoporous layers using magnetron sputtering and evaporation in vacuum leads to formation of two different surface morphologies, which can be distinguished on the basis of high-resolution scanning electron microscopy (HR-SEM) measurements. Those differences distinctly affect SERS intensity measured for probe molecules: pyridine and sodium 2-mercaptoethanesulfonate. SERS substrates obtained using evaporation technique are ca. 1.5 times more efficient than substrates prepared using magnetron sputtering.

Star-Shaped Conjugated Molecules with Oxa- or Thiadiazole Bithiophene Side Arms.

Star-shaped conjugated molecules, consisting of a benzene central unit symmetrically trisubstituted with either oxa- or thiadiazole bithiophene groups, were synthesized as promising molecules and building blocks for application in (opto)electronics and electrochromic devices. Their optical (Eg (opt)) as well as electrochemical (Eg (electro)) band gaps depended on the type of the side arm and the number of solubilizing alkyl substituents. Oxadiazole derivatives showed Eg (opt) slightly below 3 eV and by 0.2 eV larger than those determined for thiadiazole-based compounds. The presence of alkyl substituents in the arms additionally lowered the band gap. The obtained compounds were efficient electroluminophores in guest/host-type light-emitting diodes. They also showed a strong tendency to self-organize in monolayers deposited on graphite, as evidenced by scanning tunneling microscopy. The structural studies by X-ray scattering revealed the formation of supramolecular columnar stacks in which the molecules were organized. Differences in macroscopic alignment in the specimen indicated variations in the self-assembly mechanism between the molecules. The compounds as trifunctional monomers were electrochemically polymerized to yield the corresponding polymer network. As shown by UV/Vis-NIR spectroelectrochemical studies, these networks exhibited reversible electrochromic behavior both in the oxidation and in the reduction modes.

Soluble Flavanthrone Derivatives: Synthesis, Characterization, and Application to Organic Light-Emitting Diodes.

Simple modification of benzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridine-8,16-dione, an old and almost-forgotten vat dye, by reduction of its carbonyl groups and subsequent O-alkylation, yields solution-processable, electroactive, conjugated compounds of the periazaacene type, suitable for the use in organic electronics. Their electrochemically determined ionization potential and electron affinity of about 5.2 and -3.2 eV, respectively, are essentially independent of the length of the alkoxyl substituent and in good agreement with DFT calculations. The crystal structure of 8,16-dioctyloxybenzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridine (FC-8), the most promising compound, was solved. It crystallizes in space group P1‾ and forms π-stacked columns held together in the 3D structure by dispersion forces, mainly between interdigitated alkyl chains. Molecules of FC-8 have a strong tendency to self-organize in monolayers deposited on a highly oriented pyrolytic graphite surface, as observed by STM. 8,16-Dialkoxybenzo[h]benz[5,6]acridino[2,1,9,8-klmna]acridines are highly luminescent, and all have photoluminescence quantum yields of about 80 %. They show efficient electroluminescence, and can be used as guest molecules with a 4,4'-bis(N-carbazolyl)-1,1'-biphenyl host in guest/host-type organic light-emitting diodes. The best fabricated diodes showed a luminance of about 1900 cd m(-12) , a luminance efficiency of about 3 cd A(-1) , and external quantum efficiencies exceeding 0.9 %.

Indanthrone dye revisited after sixty years.

Indanthrone, an old, insoluble dye can be converted into a solution processable, self-assembling and electroluminescent organic semiconductor, namely tetraoctyloxydinaptho[2,3-a:2',3'-h]phenazine (P-C8), in a simple one-pot process consisting of the reduction of the carbonyl group by sodium dithionite followed by the substitution with solubility inducing groups under phase transfer catalysis conditions.