RESUMEN
Greywater has lower pathogen and nutrient levels than other mixed wastewaters, making it easier to treat and to reuse in nature-based wastewater treatment systems. Green walls (GWs) are one type of nature-based solutions (NBS) that are evolving in design to support on-site and low-cost greywater treatment. Greywater treatment in GWs involves interacting and complex physical, chemical, and biological processes. Design and operational considerations of such green technologies must facilitate these pivotal processes to achieve effective greywater treatment. This critical review comprehensively analyses the scientific literature on nutrient removal from greywater in GWs. It discusses nutrient removal efficiency in different GW types. Total nitrogen removal ranges from 7 to 91% in indirect green facades (IGF), 48-93% for modular living walls (MLW), and 8-26% for continuous living walls (CLW). Total phosphorus removal ranges from 7 to 67% for IGF and 2-53% for MLW. The review also discusses the specific nutrient removal mechanisms orchestrated by vegetation, substrates, and biofilms to understand their role in nitrogen and phosphorus removal within GWs. The effects of key GW design parameters on nutrient removal, including substrate characteristics, vegetation species, biodegradation, temperature, and operating parameters such as irrigation cycle and hydraulic loading rate, are assessed. Results show that greater substrate depth enhances nutrient removal efficiency in GWs by facilitating efficient filtration, straining, adsorption, and various biological processes at varying depths. Particle size and pore size are critical substrate characteristics in GWs. They can significantly impact the effectiveness of physicochemical and biological removal processes by providing sufficient pollutant contact time, active surface area, and by influencing saturation and redox conditions. Hydraulic loading rate (HLR) also impacts the contact time and redox conditions. An HLR between 50 and 60 mm/d during the vegetation growing season provides optimal nutrient removal. Furthermore, nutrient removal was higher when watering cycles were customized to specific vegetation types and their drought tolerances.
Asunto(s)
Biopelículas , Nitrógeno , Adsorción , Biodegradación Ambiental , Nutrientes , FósforoRESUMEN
There is considerable debate over how visual speech is processed in the absence of sound and whether neural activity supporting lipreading occurs in visual brain areas. Much of the ambiguity stems from a lack of behavioral grounding and neurophysiological analyses that cannot disentangle high-level linguistic and phonetic/energetic contributions from visual speech. To address this, we recorded EEG from human observers as they watched silent videos, half of which were novel and half of which were previously rehearsed with the accompanying audio. We modeled how the EEG responses to novel and rehearsed silent speech reflected the processing of low-level visual features (motion, lip movements) and a higher-level categorical representation of linguistic units, known as visemes. The ability of these visemes to account for the EEG - beyond the motion and lip movements - was significantly enhanced for rehearsed videos in a way that correlated with participants' trial-by-trial ability to lipread that speech. Source localization of viseme processing showed clear contributions from visual cortex, with no strong evidence for the involvement of auditory areas. We interpret this as support for the idea that the visual system produces its own specialized representation of speech that is (1) well-described by categorical linguistic features, (2) dissociable from lip movements, and (3) predictive of lipreading ability. We also suggest a reinterpretation of previous findings of auditory cortical activation during silent speech that is consistent with hierarchical accounts of visual and audiovisual speech perception.
Asunto(s)
Corteza Auditiva , Percepción del Habla , Humanos , Lectura de los Labios , Percepción del Habla/fisiología , Encéfalo/fisiología , Corteza Auditiva/fisiología , Fonética , Percepción Visual/fisiologíaRESUMEN
In noisy environments, our ability to understand speech benefits greatly from seeing the speaker's face. This is attributed to the brain's ability to integrate audio and visual information, a process known as multisensory integration. In addition, selective attention plays an enormous role in what we understand, the so-called cocktail-party phenomenon. But how attention and multisensory integration interact remains incompletely understood, particularly in the case of natural, continuous speech. Here, we addressed this issue by analyzing EEG data recorded from participants who undertook a multisensory cocktail-party task using natural speech. To assess multisensory integration, we modeled the EEG responses to the speech in two ways. The first assumed that audiovisual speech processing is simply a linear combination of audio speech processing and visual speech processing (i.e., an A + V model), while the second allows for the possibility of audiovisual interactions (i.e., an AV model). Applying these models to the data revealed that EEG responses to attended audiovisual speech were better explained by an AV model, providing evidence for multisensory integration. In contrast, unattended audiovisual speech responses were best captured using an A + V model, suggesting that multisensory integration is suppressed for unattended speech. Follow up analyses revealed some limited evidence for early multisensory integration of unattended AV speech, with no integration occurring at later levels of processing. We take these findings as evidence that the integration of natural audio and visual speech occurs at multiple levels of processing in the brain, each of which can be differentially affected by attention.
Asunto(s)
Percepción del Habla , Humanos , Percepción del Habla/fisiología , Habla , Atención/fisiología , Percepción Visual/fisiología , Encéfalo/fisiología , Estimulación Acústica , Percepción AuditivaRESUMEN
The contribution of ecotoxic dissolved metals from metallic roofs into urban waterways is a global issue. Identifying the specific origin of dissolved metals is critical to enabling appropriate stormwater management approaches that can provide the intended outcome of cleaner urban waterways. An event load pollutant model, Modelled Estimates of Discharges for Urban Stormwater Assessments (MEDUSA2.0), was used to predict the zinc load contributed from individual roof surfaces, under a wide range of rainfall conditions. Zinc was chosen as the pollutant of most concern given the extensive area of zinc-based roof surfaces, and the prevalence and mobility of zinc within urban waterways. The model categorized each roof by surface material and condition, and was run for individual rain events across multiple years to illustrate the influences on zinc loads from both surface type and rainfall conditions. Scenarios of future management were also assessed through the model to compare their benefits in terms of load reductions against the current baseline loadings. To understand how the load prediction and scenario modelling can provide valuable guidance for stormwater management decision-makers, the model was applied to a large urban catchment in Christchurch, New Zealand. Seven representative subcatchments of the varying proportions of industrial, commercial and residential land use type were also modelled to compare zinc loads generated. Results showed that an individual catchment's composition of roof types was the main driver of zinc load generation rather than the catchment's land use type. The modelled management scenarios demonstrated that reductions of 30% zinc could be achieved by changing only 4-13% of a subcatchment's unpainted zinc-based roof surfaces.
Asunto(s)
Contaminantes Ambientales , Contaminantes Químicos del Agua , Monitoreo del Ambiente/métodos , Metales , Lluvia , Movimientos del Agua , Contaminantes Químicos del Agua/análisis , Zinc/análisisRESUMEN
Background-The recent burden of lip and oral cavity, nasopharynx and other pharynx cancer (LOCP) has not been specifically investigated in Europe. Methods-In this descriptive epidemiological study, LOCP was categorised into lip and oral cavity cancer, nasopharynx cancer and other pharynx cancer, with European trends documented using the 2019 Global Burden of Disease (GBD). Summary statistics included deaths, age-standardised incidence rates (ASIR), mortality rates, YLLs (years of life lost), YLDs (years of life lived with disability) and DALYS (disability-adjusted life years). Results-Lip and oral cavity cancer (LO) is the most dominant with the incidence decreasing from 6.2 new cases per 100,000 (95% UI: 6.1-6.4) in 1990 to 5.3 new cases per 100,000 (95% UI: 4.6-6.1). However, nasopharynx cancer (NP) and other pharynx cancer (OP) increased from 1 and 2.2 new cases per 100,000 in 1990 to 1.1 and 3.3 new cases per 100,000 in 2019, respectively. It was noted that LOCP YLLs is much higher than YLDs. In Europe, eastern European countries, specifically Hungary, have the highest burden of LOCP. When LOCP attributable to tobacco in Ireland was compared with the EU, the percentage decrease in OP DALYs attributable to tobacco is below the EU average, whereas the percentage decrease in LO attributable to tobacco in Ireland was above the EU average. Conclusions-There has been a significant increase in ASIR in categories other pharynx and nasopharynx cancer since 1990, with significant geographic variations.
Asunto(s)
Neoplasias Nasofaríngeas , Neoplasias Faríngeas , Unión Europea , Carga Global de Enfermedades , Salud Global , Humanos , Labio , Neoplasias Nasofaríngeas/epidemiología , Neoplasias Faríngeas/epidemiología , Faringe , Años de Vida Ajustados por Calidad de VidaRESUMEN
Seeing a speaker's face benefits speech comprehension, especially in challenging listening conditions. This perceptual benefit is thought to stem from the neural integration of visual and auditory speech at multiple stages of processing, whereby movement of a speaker's face provides temporal cues to auditory cortex, and articulatory information from the speaker's mouth can aid recognizing specific linguistic units (e.g., phonemes, syllables). However, it remains unclear how the integration of these cues varies as a function of listening conditions. Here, we sought to provide insight on these questions by examining EEG responses in humans (males and females) to natural audiovisual (AV), audio, and visual speech in quiet and in noise. We represented our speech stimuli in terms of their spectrograms and their phonetic features and then quantified the strength of the encoding of those features in the EEG using canonical correlation analysis (CCA). The encoding of both spectrotemporal and phonetic features was shown to be more robust in AV speech responses than what would have been expected from the summation of the audio and visual speech responses, suggesting that multisensory integration occurs at both spectrotemporal and phonetic stages of speech processing. We also found evidence to suggest that the integration effects may change with listening conditions; however, this was an exploratory analysis and future work will be required to examine this effect using a within-subject design. These findings demonstrate that integration of audio and visual speech occurs at multiple stages along the speech processing hierarchy.SIGNIFICANCE STATEMENT During conversation, visual cues impact our perception of speech. Integration of auditory and visual speech is thought to occur at multiple stages of speech processing and vary flexibly depending on the listening conditions. Here, we examine audiovisual (AV) integration at two stages of speech processing using the speech spectrogram and a phonetic representation, and test how AV integration adapts to degraded listening conditions. We find significant integration at both of these stages regardless of listening conditions. These findings reveal neural indices of multisensory interactions at different stages of processing and provide support for the multistage integration framework.
Asunto(s)
Encéfalo/fisiología , Comprensión/fisiología , Señales (Psicología) , Percepción del Habla/fisiología , Percepción Visual/fisiología , Estimulación Acústica , Mapeo Encefálico , Electroencefalografía , Femenino , Humanos , Masculino , Fonética , Estimulación LuminosaRESUMEN
Untreated runoff was collected over multiple rain events from 19 impermeable urban surfaces, including nine roofs, six roads and four carparks, to quantify the differences in water quality due to surface type, age, condition and location. All 19 sites were exposed to the same climatic conditions. Samples were analysed for key urban pollutants of concern, namely total suspended solids and total and dissolved copper and zinc. Results showed uncoated zinc-based roofs produced zinc concentrations (up to 55 mg/L) several orders of magnitude higher than receiving environment water quality guidelines in New Zealand, of which the vast majority was in dissolved form. Even non-metallic roofs with zinc-based guttering produced zinc concentrations over ten times higher than the same roof material without zinc-based guttering. Older zinc-based roofs had approximately five times higher zinc concentrations, demonstrating a substantial age effect on the untreated runoff quality. Similarly, copper roofs produced more than an order of magnitude higher copper concentrations (up to 7.8 mg/L) above the next highest copper-producing surfaces: higher trafficked roads and carparks. Regardless of traffic volume or function, all roads and carparks produced high TSS concentrations. Dissolved metal concentrations were high across the dataset confirming that metal partitioning is an important consideration for effective pollutant control as different removal processes need to be used for dissolved versus particulate metals. This dataset provides an important benchmark of untreated runoff quality across different impermeable surface types within the same geographical area and clearly shows the influence of surface characteristics on water quality runoff regardless of the local differences in land use. These findings provide valuable guidance to stormwater managers in identifying priority surfaces and selection of appropriate treatment strategies for effective stormwater management for total suspended solids, zinc and copper.
RESUMEN
Recent work using electroencephalography has applied stimulus reconstruction techniques to identify the attended speaker in a cocktail party environment. The success of these approaches has been primarily based on the ability to detect cortical tracking of the acoustic envelope at the scalp level. However, most studies have ignored the effects of visual input, which is almost always present in naturalistic scenarios. In this study, we investigated the effects of visual input on envelope-based cocktail party decoding in two multisensory cocktail party situations: (a) Congruent AV-facing the attended speaker while ignoring another speaker represented by the audio-only stream and (b) Incongruent AV (eavesdropping)-attending the audio-only speaker while looking at the unattended speaker. We trained and tested decoders for each condition separately and found that we can successfully decode attention to congruent audiovisual speech and can also decode attention when listeners were eavesdropping, i.e., looking at the face of the unattended talker. In addition to this, we found alpha power to be a reliable measure of attention to the visual speech. Using parieto-occipital alpha power, we found that we can distinguish whether subjects are attending or ignoring the speaker's face. Considering the practical applications of these methods, we demonstrate that with only six near-ear electrodes we can successfully determine the attended speech. This work extends the current framework for decoding attention to speech to more naturalistic scenarios, and in doing so provides additional neural measures which may be incorporated to improve decoding accuracy.
Asunto(s)
Ritmo alfa , Atención/fisiología , Encéfalo/fisiología , Percepción del Habla/fisiología , Percepción Visual/fisiología , Adolescente , Adulto , Femenino , Humanos , Masculino , Adulto JovenRESUMEN
Sediment and heavy metals in stormwater runoff are key pollutants of urban waterways, and their presence in stormwater is driven by climatic factors such as rainfall intensity. This study describes the total suspended solids (TSS) and heavy metal concentrations found in runoff from four different urban surfaces within a residential/institutional catchment, in a climate where rainfall is typically of low intensity (<5.1mm·h(-1)). The results were compared to untreated runoff quality from a compilation of international studies. The road runoff had the highest TSS concentrations, while copper and galvanized roof runoff had the highest copper and zinc concentrations, respectively. Pollutant concentrations were found to be significantly different between surfaces; quantification and prediction of pollutant contributions from urban surfaces should thus take account of the different surface materials, instead of being aggregated into more generalized categories such as land use. The TSS and heavy metal concentrations were found to be at the low to medium end of ranges observed internationally, except for total copper and zinc concentrations generated by dissolution of copper and galvanized roofing material respectively; these concentrations were at least as high as those reported internationally. TSS wash-off from the roofs was seen to be a source-limited process, where all available TSS is washed off during the rain event despite the low intensity rainfall, whereas both road TSS and heavy metals wash-off from roof and road surfaces appeared to all be transport-limited and therefore some carryover of pollutants occurs between rain events. A first flush effect was seen from most surfaces for TSS, but not for heavy metals. This study demonstrates that in low intensity rainfall climates, quantification of untreated runoff quality from key individual surface types in a catchment are needed to enable development of targeted and appropriately sized stormwater treatment systems.
RESUMEN
Speech is a multisensory percept, comprising an auditory and visual component. While the content and processing pathways of audio speech have been well characterized, the visual component is less well understood. In this work, we expand current methodologies using system identification to introduce a framework that facilitates the study of visual speech in its natural, continuous form. Specifically, we use models based on the unheard acoustic envelope (E), the motion signal (M) and categorical visual speech features (V) to predict EEG activity during silent lipreading. Our results show that each of these models performs similarly at predicting EEG in visual regions and that respective combinations of the individual models (EV, MV, EM and EMV) provide an improved prediction of the neural activity over their constituent models. In comparing these different combinations, we find that the model incorporating all three types of features (EMV) outperforms the individual models, as well as both the EV and MV models, while it performs similarly to the EM model. Importantly, EM does not outperform EV and MV, which, considering the higher dimensionality of the V model, suggests that more data is needed to clarify this finding. Nevertheless, the performance of EMV, and comparisons of the subject performances for the three individual models, provides further evidence to suggest that visual regions are involved in both low-level processing of stimulus dynamics and categorical speech perception. This framework may prove useful for investigating modality-specific processing of visual speech under naturalistic conditions.
RESUMEN
Understanding the particle size distribution (PSD) of sediment in urban runoff assists in the selection of appropriate treatment systems for sediment removal as systems vary in their ability to remove sediment across different particle size fractions. Variation in PSD in runoff from individual urban surfaces both during and across multiple rain events is not well understood and it may lead to performance uncertainty in treatment systems. Runoff PSDs in international literature were compiled to provide a comparative summary of PSDs from different urban surfaces. To further assess both intra-event and inter-event PSD variation, untreated runoff was collected from road, concrete roof, copper roof, and galvanized roof surfaces within an urban catchment exposed to the same rainfall conditions and analysed for PSD and total suspended solids (TSS). Road runoff had the highest TSS concentrations, while copper roofs had high initial TSS that reduced to very low levels under steady state conditions. Despite variation in TSS concentrations, the median particle diameter of the TSS was comparable across the surfaces. Intra-event variation was generally not significant, but substantial inter-event variation was observed, particularly for coarser road and concrete roof surfaces. PSD variation for each surface contributed to a wide range in predicted treatment performance and suggests that short-retention treatment devices carry a high performance risk of not being able to achieve adequate TSS removal across all rain events.
Asunto(s)
Lluvia , Eliminación de Residuos Líquidos/métodos , Movimientos del Agua , Contaminantes Químicos del Agua/análisis , Ciudades , Monitoreo del Ambiente , Nueva Zelanda , Tamaño de la PartículaRESUMEN
Stormwater treatment technologies to manage runoff during rain events are primarily designed to reduce flood risks, settle suspended solids and concurrently immobilise metals and nutrients. Life Cycle Assessment (LCA) is scarcely documented for stormwater systems despite their ubiquitous implementation. LCA modelling quantified the environmental impacts associated with the materials, construction, transport, operation and maintenance of different stormwater treatment systems. A pre-fabricated concrete vortex unit, a sub-surface sandfilter and a raingarden, all sized to treat a functional unit of 35 m(3) of stormwater runoff per event, were evaluated. Eighteen environmental mid-point metrics and three end-point 'damage assessment' metrics were quantified for each system's lifecycle. Climate change (kg CO2 eq.) dominated net environmental impacts, with smaller contributions from human toxicity (kg 1,4-DB eq.), particulate matter formation (kg PM10 eq.) and fossil depletion (kg oil eq.). The concrete unit had the highest environmental impact of which 45% was attributed to its maintenance while impacts from the sandfilters and raingardens were dominated by their bulky materials (57%) and transport (57%), respectively. On-site infiltrative raingardens, a component of green infrastructure (GI), had the lowest environmental impacts because they incurred lower maintenance and did not have any concrete which is high in embodied CO2. Smaller sized raingardens affording the same level of stormwater treatment had the lowest overall impacts reinforcing the principle that using fewer resources reduces environmental impacts. LCA modelling can serve as a guiding tool for practitioners making environmentally sustainable solutions for stormwater treatment.
Asunto(s)
Conservación de los Recursos Naturales/métodos , Ambiente , Lluvia , Movimientos del Agua , Purificación del Agua/métodos , Cambio Climático , Combustibles Fósiles/análisis , Humanos , Modelos Teóricos , Material Particulado , Purificación del Agua/instrumentaciónRESUMEN
Atmospheric pollutants deposited on impermeable surfaces can be an important source of pollutants to stormwater runoff; however, modelling atmospheric pollutant loads in runoff has rarely been done, because of the challenges and uncertainties in monitoring their contribution. To overcome this, impermeable concrete boards (≈ 1m(2)) were deployed for 11 months in different locations within an urban area (industrial, residential and airside) throughout Christchurch, New Zealand, to capture spatially distributed atmospheric deposition loads in runoff over varying meteorological conditions. Runoff was analysed for total and dissolved Cu, Zn, Pb, and total suspended solids (TSS). Mixed-effect regression models were developed to simulate atmospheric pollutant loads in stormwater runoff. In addition, the models were used to explain the influence of different meteorological characteristics (e.g. antecedent dry days and rain depth) on pollutant build-up and wash-off dynamics. The models predicted approximately 53% to 69% of the variation in pollutant loads and were successful in predicting pollutant-load trends over time which can be useful for general stormwater planning processes. Results from the models illustrated the importance of antecedent dry days on pollutant build-up. Furthermore, results indicated that peak rainfall intensity and rain duration had a significant relationship with TSS and total Pb, whereas, rain depth had a significant relationship with total Cu and total Zn. This suggested that the pollutant speciation phase plays an important role in surface wash-off. Rain intensity and duration had a greater influence when the pollutants were predominantly in their particulate phase. Conversely, rain depth exerted a greater influence when a high fraction of the pollutants were predominantly in their dissolved phase. For all pollutants, the models were represented by a log-arctan relationship for pollutant build-up and a log-log relationship for pollutant wash-off. The modelling approach enables the site-specific relationships between individual pollutants and rainfall characteristics to be investigated.
Asunto(s)
Atmósfera/química , Cobre/análisis , Plomo/análisis , Conceptos Meteorológicos , Modelos Teóricos , Contaminantes Químicos del Agua/análisis , Zinc/análisis , Monitoreo del Ambiente , Nueva Zelanda , Lluvia/química , Incertidumbre , Movimientos del AguaRESUMEN
Metal roofs are recognized for conveying significant metal loads to urban streams through stormwater runoff. Metal concentrations in urban runoff depend on roof types and prevailing weather conditions but the combined effects of roof age and rainfall pH on metal mobilization are not well understood. To investigate these effects on roof runoff, water quality was analysed from galvanized iron and copper roofs following rainfall events and also from simulating runoff using a rainfall simulator on specially constructed roof modules. Zinc and copper yields under different pH regimes were investigated for two roof materials and two different ages. Metal mobilization from older roofs was greater than new roofs with 55-year-old galvanized roof surfaces yielding more Zn, on average increasing by 45% and 30% under a rainfall pH of 4 and 8, respectively. Predominantly dissolved (85-95%) Zn and Cu concentrations in runoff exponentially increased as the rainfall pH decreased. Results also confirmed that copper guttering and downpipes associated with galvanized steel roof systems can substantially increase copper levels in roof runoff. Understanding the dynamics of roof surfaces as a function of weathering and rainfall pH regimes can help developers with making better choices about roof types and materials for stormwater improvement.
Asunto(s)
Materiales de Construcción/análisis , Metales , Lluvia/química , Contaminantes Químicos del Agua/química , Concentración de Iones de Hidrógeno , Factores de TiempoRESUMEN
High biomass productivity and efficient harvesting are currently recognized challenges in microbial biofuel applications. To produce naturally settleable biomass, combined growth of native microalgae and bacteria was facilitated in laboratory sequencing batch reactors (SBRs) using primary treated wastewater from the Christchurch Wastewater Treatment Plant (CWTP) in New Zealand. SBRs were operated under a simulated, local, summer climate (i.e., 925 µmol/m(2)/s of photosynthetically active radiation for 14.7 h per day at 21 °C mean water temperature) using 1.4- to 8-day hydraulic retention times (HRTs) to optimize growth. Solids retention times (SRTs) were varied from 4 to 40 days by discharging different ratios of supernatant and completely mixed culture. Biomass productivity up to 31 g/m(2)/day of solids was obtained, and it generally increased as retention times decreased. Biomass settleability was typically 70-95%, and the microbes aggregated into compact flocs as cultures aged up to four months. Due to a low lipid content of 10.5%, anaerobic digestion appeared to be the most appropriate biofuel conversion process with potential to generate 19,200 m(3)/ha/yr of methane based on settleable mixture productivity.
Asunto(s)
Bacterias/metabolismo , Biocombustibles , Biomasa , Microalgas/metabolismoRESUMEN
PURPOSE: Urban waterways are impacted by diffuse stormwater runoff, yet other discharges can unintentionally contaminate them. The Okeover stream in Christchurch, New Zealand, receives air-conditioning discharge, while its ephemeral reach relies on untreated stormwater flow. Despite rehabilitation efforts, the ecosystem is still highly disturbed. It was assumed that stormwater was the sole contamination source to the stream although water quality data were sparse. We therefore investigated its water and sediment quality and compared the data with appropriate ecotoxicological thresholds from all water sources. METHODS: Concentrations of metals (Zn, Cu and Pb) in stream baseflow, stormwater runoff, air-conditioning discharge and stream-bed sediments were quantified along with flow regimes to ascertain annual contaminant loads. Metals were analysed by ICP-MS following accredited techniques. RESULTS: Zn, Cu and Pb concentrations from stormflow exceeded relevant guidelines for the protection of 90% of aquatic species by 18-, 9- and 5-fold, respectively, suggesting substantial ecotoxicity potential. Sporadic copper (Cu) inputs from roof runoff exceeded these levels up to 3,200-fold at >4,000 µg L⻹ while Cu in baseflow from air-conditioning inputs exceeded them 5.4-fold. There was an 11-fold greater annual Cu load to the stream from air-conditioning discharge compared to stormwater runoff. Most Zn and Cu were dissolved species possibly enhancing metal bioavailability. Elevated metal concentrations were also found throughout the stream sediments. CONCLUSIONS: Environmental investigations revealed unsuspected contamination from air-conditioning discharge that contributed greater Cu annual loads to an urban stream compared to stormwater inputs. This discovery helped reassess treatment strategies for regaining ecological integrity in the ecosystem.
Asunto(s)
Sedimentos Geológicos/química , Metales Pesados/análisis , Ríos/química , Urbanización , Eliminación de Residuos Líquidos , Contaminantes Químicos del Agua/análisis , Calidad del Agua , Aire Acondicionado , Fenómenos Químicos , Materiales de Construcción/análisis , Cobre/análisis , Cobre/química , Ecotoxicología/métodos , Concentración de Iones de Hidrógeno , Plomo/análisis , Plomo/química , Metales Pesados/química , Nueva Zelanda , Oxígeno/análisis , Lluvia , Estaciones del Año , Solubilidad , Contaminantes Químicos del Agua/química , Zinc/análisis , Zinc/químicaRESUMEN
Contaminants deposited on impermeable surfaces migrate to stormwater following rainfall events, but accurately quantifying their spatial and temporal yields useful for mitigation purposes is challenging. To overcome limitations in current sampling methods, a system was developed for rapid quantification of contaminant build-up and wash-off dynamics from different impervious surfaces. Thin boards constructed of concrete and two types of asphalt were deployed at different locations of a large carpark to capture spatially distributed contaminants from dry atmospheric deposition over specified periods of time. Following experimental exposure time, the boards were then placed under a rainfall simulator in the laboratory to generate contaminant runoff under controlled conditions. Single parameter effects including surface roughness and material composition, number of antecedent dry days, rain intensity, and water quality on contaminant build-up and wash-off yields could be investigated. The method was applied to quantify spatial differences in deposition rates of contaminants (TSS, zinc, copper and lead) at two locations varying in their distance to vehicle traffic. Results showed that boards exposed at an unused part of the carpark >50 m from vehicular traffic captured similar amounts of contaminants compared with boards that were exposed directly adjacent to the access route, indicating substantial atmospheric contaminant transport. Furthermore, differences in contaminant accumulation as a function of surface composition were observed. Runoff from asphalt boards yielded higher zinc loads compared with concrete surfaces, whereas runoff from concrete surfaces resulted in higher TSS concentrations attributed to its smoother surfaces. The application of this method enables relationships between individual contaminant behaviour and specific catchment characteristics to be investigated and provides a technique to derive site-specific build-up and wash-off functions required for modelling contaminant loads from impermeable surfaces.
Asunto(s)
Atmósfera/química , Monitoreo del Ambiente , Contaminantes Ambientales/análisis , Metales Pesados/análisis , Ciudades , Contaminación Ambiental/estadística & datos numéricos , Lluvia/química , Transportes , Contaminantes Químicos del Agua/análisisRESUMEN
Bioreactors represent an emerging technology for removing metals and sulfate commonly found in acid mine drainage (AMD). Six continuously fed anaerobic bioreactors employing organic and alkaline waste materials were operated to investigate relationships between metal and sulfate removal from AMD. Median AMD influent chemistry was 65.8mg/L Fe (49.7-113mg/L), 46.5mg/L Al (33.5-72.4mg/L) and 608mg/L sulfate (493-1007mg/L). Bioreactors containing mussel shells as an alkaline substrate amendment were more effective at removing metals and sulfate than those containing limestone. Experimental results indicated bioreactor design and operation should be dependent on treatment goals. These include 0.3mol sulfate loading/m(3)/day for sulfate removal (mean of 94.1% (87.6-98.0%), 0.4mol metals/m(3)/day for metal (mean of 99.0% (98.5-99.9%)) and partial sulfate (mean of 46.0% (39.6-57.8%)) removal and 0.8mol metals/m(3)/day for metal (mean of 98.4% (98.2-98.6%) and minimal sulfate (mean of 16.6% (11.9-19.2%)) removal. Aluminum removal efficiency was on average 1.72% (0.04-3.42%) greater than Fe during stable operating conditions.