Augmented Reality Eyewear for Assisting in the Preparation and Control of Cancer Therapies: Assessing the Learning Curve and Level of Adoption.

Since March 2022, the centralized cytotoxic preparation unit at the Lille University Hospital (Lille, France) is equipped with augmented reality eyewear for preparation and quality control. The technology enables a user-friendly guided step by step preparation process. It also assists the user by identifying vials through data matrix scan and recording photos at different stages of preparation in order to replace the in-process double visual inspection which will now be carried out a posteriori during the release control. In this paper, we evaluate user feedback and model the learning curve for this new tool. The team's feedback was evaluated using the System Usability Scale (SUS) and Short User Experience Questionnaire (S-UEQ). Both questionnaires showed very good acceptance of the tool by our teams, with scores of 79.7 for the SUS and 2.014 for the UEQ. Finally, a learning curve was drawn up according to Wright, showing a learning curve of 91%. This study shows that the tool has been very well integrated into our preparation unit.

[Use of a pharmaceutical decision support system in the valuation of hospital stays: Evaluation through 3 examples in collaboration with the department of medical information]. / Utilisation d'un système d'aide à la décision pharmaceutique dans la valorisation des séjours hospitaliers : évaluation à travers 3 exemples en collaboration avec le département de l'information médicale.

Pharmacy decision support systems (PDSS) help clinical pharmacists to prevent and detect adverse drug events. The coding of hospital stays by the department of medical information (DMI) requires expertise, as it determines hospital revenues and the epidemiological data transmitted via the French national hospital database. The aim was to study the interest and feasibility of using a PDSS, in collaboration with the DMI, to help with the coding of hospital stays. Over 5 months, three rules were implemented in the PDSS to detect gout, Parkinson's disease and oro-pharyngeal candidiasis. The PDSS alerts were analyzed by a pharmacy resident and then forwarded to the DMI, who analyzed the stays to see whether or not the coding for the disease corresponding to the alert was present. The absence of coding was evaluated and tracked, along with the resulting change in severity and valuation. Three hundred and ninety-nine alerts from the PDSS were analyzed and sent to the DMI, representing 211 stays and 309 uniform hospital standardized discharge abstract (UHSDA) in the fields of medicine, surgery and obstetrics. Two hundred and eight (67.3%) UHSDA did not have the coding corresponding to the alert. For the majority of these UHSDAs, apart from diagnostic precision, there was no impact on the valuation of stays. For 4 UHSDAs, the addition of the diagnosis code led to an increase in the value of the stay and the severity of the homogeneous patient groups. The total revaluation corresponding to this modification was €5416. The use of PDSS has helped in the precision of diagnosis coding and the valuation of stays. This result must be weighed against the time invested in analyzing alerts and associated coding. An improvement in disease detection and data processing is needed to be feasible in practice, given the more than 227,600 RSS performed per year at our facility.

Assessment of chemical contamination by cancer drugs during use of the RIVATM compounding robot: A pilot study.

INTRODUCTION: Many hospitals are now investing in robotic compounding system for the preparation of cytotoxic agents. The objective of the present study was to describe contamination by cytotoxics inside and outside the RIVATM robot (ARxIUM, Winnipeg, Canada). MATERIAL & METHODS: We applied a risk analysis to determine which locations inside and outside the compounding robot should be monitored. Samples were collected by swabbing with a wet swab (using 0.1 mL of sterile water) before the robots was cleaned. Ten cytotoxics compounded with the robot were screened for using LC-MS/MS. We determined the percentage contamination rates inside (CRin) and outside (CRout) the robot and the amounts of each contaminant (in ng/cm²). If a sample was found to be positive, a corrective action was implemented. RESULTS: Our risk analysis highlighted 10 locations inside the robot and 7 outside. Ten sampling campaigns (10 samples per campaign) were performed. The mean CRin (40%) was significantly higher than the mean CRout (2%; p < 10-4). Gemcitabine and cyclophosphamide were the main contaminants. After the implementation of corrective measures (such as daily cleaning with SDS/isopropyl alcohol), the CRin fell from 60% to 10%. DISCUSSION/CONCLUSION: The frequency of contamination was lower for robotic compounding than for manual compounding in an isolator. However, robotic compounding tended to generated larger mean amounts of contaminant; this was related to incidents such as splashing when syringes were disposed of after the compounding. The implementation of corrective actions effectively reduced the CRs. Further longer-term studies are required to confirm these results.

The Infusion of Piperacillin/Tazobactam with an Elastomeric Device: A Combined 24-H Stability Study and Drug Solution Flow Rate Analysis.

Bacterial respiratory tract infections (e.g., in patients with cystic fibrosis) may be treated with the intravenous infusion of a piperacillin/tazobactam (P/T) solution through an elastomeric device. In the present work, we combined a 24-h drug stability study with an assessment of the drug solution flow rate during an in vitro simulated infusion. Experiments were performed in triplicate with two excipient-free generic P/T solutions and an excipient-containing proprietary P/T solution in saline (all 50/6.25 mg/mL) released from an elastomeric infusion device at 32 °C. The P/T solutions' stability was assessed by an HPLC-UV assay, pH and osmolality measurements, a visual assessment, and particle counting. Before these analyses, a forced degradation study was performed. To assess the flow rate, a precision scale was used to weigh the solution collected at the infusion line outlet. The stability criteria were <10% degradation and a flow rate within ± 15% of the nominal value over the 24-h infusion period: all three P/T solutions were found to be stable. The actual flow rate was lower than the expected flow rate; this difference was probably due to the drug solution's high viscosity and must be taken into account in clinical use.

Impact of the use of a drug-drug interaction checker on pharmacist interventions involving well-known strong interactors.

OBJECTIVES: Several drug-drug interaction (DDI) checkers such as DDI-Predictor have been developed to detect and grade DDIs. DDI-Predictor gives an estimate of the magnitude of an interaction based on the ratio of areas under the curve. The objective of the present study was to analyse the frequencies of DDIs involving well-known strong interactors such as rifampicin and selective serotonin reuptake inhibitors (SSRIs), as reported by a clinical pharmacy team using DDI-Predictor, and the pharmacist intervention acceptance rate. METHODS: The pharmacist intervention rate and the physician acceptance rate were calculated for DDIs involving rifampicin or the SSRIs fluoxetine, paroxetine, duloxetine and sertraline. The rates were compared with a bilateral χ2 test or Fisher's exact test. RESULTS: Of the 284 DDIs recorded, 38 (13.4%) involved rifampicin and 78 (27.5%) involved SSRIs. The pharmacist intervention rate differed significantly (68.4% for rifampicin vs 48.8% for SSRIs; p=0.045) but the physician acceptance rate did not (84.6% for rifampicin vs 81.6% for SSRIs; p=1). Pharmaceutical interventions for SSRIs were more frequent when the ratio of the area under the drug concentration versus time curve in DDI-Predictor was >2. Pharmacists were more likely to issue a pharmacist intervention for DDIs involving rifampicin because of a high perceived risk of treatment failure and were less likely to issue a pharmacist intervention for DDIs involving an SSRI, except when the suspected interaction was strong. CONCLUSIONS: DDI checkers can help pharmacists to manage DDIs involving strong interactors. DDIs involving strong inhibitors versus a strong inducer differ with regard to their intervention and acceptance rates, notably due to the estimation of the magnitude of the DDI.

Retrospective comparison of a weight-based dose every 2 weeks with a fixed dose every month: a real-life analysis of nivolumab in the treatment of advanced melanoma.

Nivolumab was first authorized at a weight-based dose (WBD) of 3 mg/kg every two weeks (Q2W). Since 2017, a fixed dose (FD) regimen [first 240 mg Q2W and then 480 mg per month (Q4W)] was allowed. The objective of the study was to compare a WBD regimen and an FD regimen with regard to effectiveness and safety. We conducted a single-center, retrospective, real-life study of consecutive adult patients who had received a WBD of nivolumab or an FD of 480 mg Q4W. The primary endpoint was the occurrence of grade ≥3 immune-related adverse events (irAEs). The secondary endpoints were overall survival and cost of the treatment. In all, 342 patients were included: 71 in the WBD cohort and 271 in the FD cohort. Of these patients, 201 patients (59.6%) experienced an irAE, and 24 of these events were graded as ≥3. At 12 months, there was no significant difference in irAE occurrence between the two cohorts [hazard ratio (95% confidence interval): 0.54 (0.21-1.36), P  = 0.19]. The 12-month overall survival rate was significantly lower in the WBD cohort ( P  < 0.001). Switching from a fortnightly weight dose to a fixed monthly dose halves the cost of hospitalization. Our results did not show a significant difference between WBD and FD cohort in the occurrence of severe irAEs. However overall survival appeared to be significantly higher in FD group. Some clinical trials are investigating a hybrid dosing regimen in which a WBD is capped by an FD. The present results need to be confirmed in prospective studies.

Pharmaceutical Decision Support System Using Machine Learning to Analyze and Limit Drug-Related Problems in Hospitals.

The health product circuit corresponds to the chain of steps that a medicine goes through in hospital, from prescription to administration. The safety and regulation of all the stages of this circuit are major issues to ensure the safety and protect the well-being of hospitalized patients. In this paper we present an automatic system for analyzing prescriptions using Artificial Intelligence (AI) and Machine Learning (ML), with the aim of ensuring patient safety by limiting the risk of prescription errors or drug iatrogeny. Our study is made in collaboration with Lille University Hospital (LUH). We exploited the MIMIC-III (Medical Information Mart for Intensive Care) a large, single-center database containing information corresponding to patients admitted to critical care units at a large tertiary care hospital.

Combination of a propofol emulsion with alpha-2 adrenergic receptor agonists used for multimodal analgesia or sedation in intensive care units: a physicochemical stability study.

OBJECTIVES: To assess the physicochemical stability of the combination of a propofol emulsion with an alpha-2 (α2) adrenergic receptor agonist (α2A; clonidine or dexmedetomidine) under conditions mimicking routine practice in an intensive care unit or in multimodal analgesia procedures. METHODS: We developed and validated three stability-indicating methods based on high-performance liquid chromatography with ultraviolet (HPLC-UV) detection. Eight different conditions per combination were evaluated in triplicate, with variations in the simulated, bodyweight-adjusted dose level and the drugs' flow rate. The drugs were mixed in clinically relevant concentrations and proportions and then stored unprotected from light, in clear glass vials at room temperature for 96 hours. At each sampling point, we assessed the chemical stability (the HPLC-UV drug level, pH, and osmolality) and physical compatibility (visual aspect, zeta potential (ZP), mean droplet diameter (MDD, Z-average) and polydispersity index (PDI)). We validated our stability findings in positive and negative control experiments. RESULTS: Over the 96-hour test, the concentrations of propofol, clonidine and dexmedetomidine did not fall below 90% of the initial value, and the pH and osmolality were stable. The visual aspect of the mixed propofol emulsions did not change. The MDD remained below 500 nm (range 165-195 nm). The PDI was always below 0.4; 78.7% of the measurements were below 0.1 and 21.3% were between 0.1 and 0.4. The ZP measurements (-31.3 to -42.9 mV) suggested that the emulsion was stable. The MDD and PDI increased slightly at 96 hours under some conditions, which might indicate early destabilisation of the emulsion. Given that the MDD remained below 500 nm, these emulsions are compatible with intravenous administration. CONCLUSIONS: Our results demonstrate the chemical and physical compatibility of propofol-α2 agonist mixtures at concentrations and in proportions representative of standard protocols when stored unprotected from light at room temperature for 96 hours.

Evaluation of cancer drug infusion devices prior to the implementation of a compounding robot.

INTRODUCTION: Compounding robots are increasingly being implemented in hospital pharmacies. In our hospital, the recent acquisition of a robot (RIVATM, ARxIUM) for intravenous cancer drug compounding obliged us to replace the previously used infusion devices. The objective of the present study was to assess and qualify the new intravenous sets prior to their use in our hospital and prior to the implementation of the compounding robot. MATERIALS AND METHODS: The ChemoLockTM (ICU Medical) was compared with the devices used previously for compounding (BD PhaSealTM, Becton-Dickinson) and infusion (Connect-ZTM, Codan Medical). The connection/disconnection of infusion devices to/from 50 mL infusion bags was tested with a dynamometer (Multitest-i, Mecmesin). Leakage contamination was visualized by a methylene blue assay and was quantified in simulated pump infusions with 20 mg/mL quinine sulfate (N = 36/group); after the analytical assay had been validated, quinine was detected by UV-spectrophotometry at 280 and 330 nm. Groups were compared using chi-squared or Mann-Whitney U tests. RESULTS: The connection/disconnection test showed that although all the devices complied with the current standard, there was a statistically significant difference in the mean ± standard deviation compression force (51.5 ± 11.6 for the Connect-ZTM vs. 60.3 ± 11.7 for the ChemoLockTM; p = 0.0005). Leaks were detected in 32 (29.1%) of the 110 tests of the ChemoLockTM. The contamination rates were also significantly different: 13.9% for the BD PhaSealTM versus 75.0% for the ChemoLockTM; p < 0.0001). DISCUSSION/CONCLUSION: Our results showed that the new infusion device complied with current standards. However, the presence of contamination emphasizes the need for operators to use the recommended personal protective equipment. Further studies of contamination with cancer drugs are required.

Optimization of Automated Radiosynthesis of Gallium-68-Labeled PSMA11 with Two [68Ge]Ge/[68Ga]Ga Generators: Fractional Elution or Prepurification?

Prostate cancer is one of the most common forms of cancer in men. An imaging technique for its diagnosis is [68Ga]-prostate-specific membrane antigen ([68Ga]Ga-PSMA-11) positron emission tomography (PET). To address the increasing demand for [68Ga]-labeled peptides and reduce the cost of radiosynthesis, it is therefore necessary to optimize the elution process of [68Ge]Ge/[68Ga]Ga generators. This study aims to identify the most effective approach for optimizing radiosynthesis using double elution in parallel of two [68Ge]Ge/[68Ga]Ga generators. Two methods have been tested: one using prepurification, and the other using fractionated elution. Five synthesis sequences were conducted using each method. The mean labeling yields for double elution with prepurification were 45.8 ± 29.4 (mean ± standard deviation) and none met the required criteria. The mean labeling yields for the fractionated double elution were 97.5 ± 1.9 (mean ± standard deviation) meeting the criteria, significantly superior to the prepurification method (p = 0.012), and similar to those of simple elution. This study showed that fractionated double elution from [68Ge]Ge/[68Ga]Ga generators produced a significantly higher labeling yield than double elution with prepurification, resulting in a larger activity recovered via radiosynthesis, thereby allowing more diagnostic tests to be performed.

Acute stroke in patients taking an oral anticoagulant: impact of clinical pharmacist's intervention on pharmacovigilance reporting.

INTRODUCTION: Ischemic or hemorrhagic stroke can occur to patients treated with oral anticoagulants (OAC), through lack of effectiveness or overdosing. OBJECTIVE: To evaluate the impact of clinical pharmacist's intervention on pharmacovigilance (PV) reporting for OAC-treated patients hospitalized for stroke. METHODS: Monocentric prospective study in which a clinical pharmacist's intervention was performed in a stroke unit, with a focus on patients treated by OAC prior admission. A PV report was made with all data collected for cases of stroke suspected to be related to OAC therapy. Data provided by pharmacist were compared with data initially available in the patient's electronic medical records. PV reports with pharmacist intervention were compared to those without. RESULTS: During the study period, 48 patients were included in the study: 43 (89.6%) ischemic strokes with an embolic or unknown etiology, four hemorrhage strokes (8.33%), and one medication error (2.08%). A clinical pharmacist intervention was performed for 19 patients (39.6%) and provided significant additional data in all of them (100%). The information was related to adherence to treatment for 17 cases (89.5%), OAC's initial prescription date for 11 cases (57.9%) and identifying event(s) that could have interfered with the efficacy of the OAC in five cases (26.3%). For patients with pharmacist intervention, PV reports were significantly more informative in terms of date's introduction of anticoagulant, adherence to treatment, reference to weight change or concomitant event. CONCLUSIONS: clinical pharmacist's intervention with patients taking oral anticoagulants and hospitalized for acute stroke contributes to collect high-quality data for pharmacovigilance reporting.

Limitation of the migration of plasticizers from medical devices through treatment with low-pressure cold plasma, polydopamine coating, and annealing.

Poly(vinyl chloride) (PVC) is widely used in the manufacture of medical devices. The plasticizers added to PVC are potentially toxic for humans, likely to migrate, and thus unintentionally administered to patients. The objective of the present study was to reduce the migration of plasticizer (1,2-cyclohexanedicarboxylic acid, diisononylester (DINCH) or trioctyltrimellitate (TOTM)) from PVC by implementing a three-step surface treatment process: (i) pretreatment with low-pressure argon cold plasma, (ii) polydopamine coating, and (iii) post-treatment with cold plasma exposure or thermal treatment at 140 °C. Samples were then characterized in terms of the water contact angle (WCA) and the aspect in scanning electron microscopy. Plasticizer migration (n = 5) was measured using an HPLC technique with ultraviolet detection and found to depend on the treatment and the plasticizer. Plasticized PVC was hydrophobic, with a measured mean ± standard deviation WCA of 96.7 ± 3.6° for PVC-DINCH and 110.2 ± 5.8° for PVC-TOTM. Plasma post-treatment and thermal post-treatment were respectively associated with a mean decrease in migration of 38.3 ± 1.9% for DINCH and 61.5 ± 4.4% for TOTM. Our results are promising with regard to limiting the migration of plasticizers into the patient's blood and thus enabling the development of safer medical devices.

Evaluation of Strategies for Reducing Vancomycin-Piperacillin/Tazobactam Incompatibility.

BACKGROUND: Drug incompatibility is defined as a physical-chemical reaction between two or more injectable drugs and that results mainly in precipitation or insolubility. Several strategies for reducing incompatibilities have been implemented empirically in intensive care units. However, these strategies have never been compared directly (and particularly in terms of the particulate load and drug mass flow rate) under standardized conditions. The objective of the present in vitro study was to evaluate the impact of various strategies for preventing incompatibility between simultaneously infused vancomycin and piperacillin/tazobactam. METHODS: An in-line filter, a dilute vancomycin solution (5 mg/mL), and an alternative saline administration line were evaluated separately. The infusion line outlet was connected to a dynamic particle counter. The antibiotic concentration was measured in an HPLC-UV assay. RESULT: The use of an in-line filter and an alternative saline administration route did not significantly reduce the particulate load caused by vancomycin-piperacillin/tazobactam incompatibility. Dilution of the vancomycin solution was associated with a significantly lower particulate load and maintenance of the vancomycin mass flow rate. DISCUSSION: It is important to systematically compare the efficacy of strategies for preventing drug incompatibility. The use of diluted vancomycin solution gave the best results in the case of vancomycin-piperacillin/tazobactam incompatibility.

Cistracurium Besylate 10 mg/mL Solution Compounded in a Hospital Pharmacy to Prevent Drug Shortages: A Stability Study Involving Four Degradation Products.

BACKGROUND: Stability study of a 10 mg/mL injectable cisatracurium solution stored refrigerated in amber glass ampoules for 18 months (M18). METHODS: 4000 ampoules were aseptically compounded using European Pharmacopoeia (EP)-grade cisatracurium besylate, sterile water for injection, and benzenesulfonic acid. We developed and validated a stability-indicating HPLC-UV method for cisatracurium and laudanosine. At each stability study time point, we recorded the visual aspect, cisatracurium and laudanosine levels, pH, and osmolality. Sterility, bacterial endotoxin content, and non-visible particles in solution were checked after compounding (T0) and after M12 and M18 of storage. We used HPLC-MS/MS to identify the degradation products (DPs). RESULTS: During the study, osmolality remained stable, pH decreased slightly, and the organoleptic properties did not change. The number of non-visible particles remained below the EP's threshold. Sterility was preserved, and bacterial endotoxin level remained below the calculated threshold. Cisatracurium concentration remained within the ±10% acceptance interval for 15 months and then decreased to 88.7% of C0 after M18. The laudanosine generated accounted for less than a fifth of the cisatracurium degradation, and three DPs were generated-identified as EP impurity A, impurities E/F, and impurities N/O. CONCLUSION: Compounded 10 mg/mL cisatracurium injectable solution is stable for at least 15 months.

Antiviral functionalization of a polypropylene nonwoven textile structure as a self-decontaminating layer for respiratory masks.

The aim of this work was to develop a filtering biocidal polypropylene (PP) nonwoven textile structure to block and inactivate airborne bacteria and viruses. PP filters were functionalized with a cyclodextrin (CD)-polycarboxylic acid-crosslinked polymer (PP-CD) through a pad/dry/curing process, and were then activated by padding in an alkyl dimethyl benzalkonium chloride (ADBAC) solution. The textile finishing process parameters were optimized with the perspective of mass production, considering the threshold temperature necessary for provoking crosslinking and the limitation of the low thermal stability of PP. The use of an aqueous solution containing hydroxypropyl-ß-cyclodextrin (HPßCD), 1,2,3,4-butanetetracarboxylic acid (BTCA), ammonium hypophosphite (AH), and a surfactant allowed immobilization of the optimal quantity of cyclodextrin polymer under curing for 5 minutes at 125 °C without affecting the nonwoven PP structure. The presence of CD drastically increased the sorption of ADBAC on the textiles. There was leaching of ADBAC at the first rinsing and then satisfactory fastness at the second and third rinsings, revealing adsorption mechanisms by weak physical interactions, ionic interactions, and inclusion of ADBAC inside the CD cavities. SEM revealed no clogging of the nonwoven pores, nor any increase in the air flow resistance, as evaluated by pressure drop measurements. The filtration efficiency of particulate matter PM3.0 and PM0.5 was moderately affected, in contrast to that of PM0.3, which greatly decreased due to the loss of the electrostatic charge of the filter upon the functionalization process. Bactericidal tests resulted in a reduction of 3 log10 against Staphylococcus aureus, and for virucidal tests on human coronavirus HCoV-229E, there was a reduction of 3.4 log10, with both strains undergoing 20 minutes of contact. Finally, the filter we developed is manufacturable by a scalable process, and because of its filtration and biocidal performances, it is a choice material as a self-disinfecting layer in the fabrication of facepiece respirators.

Detection of Drug-Related Problems through a Clinical Decision Support System Used by a Clinical Pharmacy Team.

Clinical decision support systems (CDSSs) are intended to detect drug-related problems in real time and might be of value in healthcare institutions with a clinical pharmacy team. The objective was to report the detection of drug-related problems through a CDSS used by an existing clinical pharmacy team over 22 months. It was a retrospective single-center study. A CDSS was integrated in the clinical pharmacy team in July 2019. The investigating clinical pharmacists evaluated the pharmaceutical relevance and physician acceptance rates for critical alerts (i.e., alerts for drug-related problems arising during on-call periods) and noncritical alerts (i.e., prevention alerts arising during the pharmacist's normal work day) from the CDSS. Of the 3612 alerts triggered, 1554 (43.0%) were critical, and 594 of these 1554 (38.2%) prompted a pharmacist intervention. Of the 2058 (57.0%) noncritical alerts, 475 of these 2058 (23.1%) prompted a pharmacist intervention. About two-thirds of the total pharmacist interventions (PI) were accepted by physicians; the proportion was 71.2% for critical alerts (i.e., 19 critical alerts per month vs. 12.5 noncritical alerts per month). Some alerts were pharmaceutically irrelevant-mainly due to poor performance by the CDSS. Our results suggest that a CDSS is a useful decision-support tool for a hospital pharmacist's clinical practice. It can help to prioritize drug-related problems by distinguishing critical and noncritical alerts. However, building an appropriate organizational structure around the CDSS is important for correct operation.

Perception, knowledge, practices and training regarding the risk of exposure to antineoplastic drugs in three French compounding units.

INTRODUCTION: Healthcare workers are exposed to hazardous drugs such as antineoplastic drugs, which have potential carcinogenic, mutagenic and teratogenic effects. Protective measures must be taken after appropriate staff training to handle antineoplastic drugs in a safe way. The objective was to assess perception, knowledge, practices and training regarding the risk of exposure of healthcare workers in three French compounding units. METHODS: This descriptive study was based on a questionnaire made of 33 questions divided into five sections related to the handling of antineoplastic drugs: perception of the risks, knowledge of the risks, protection practices, specific training and general questions. RESULTS: Among the 39 participants, over half considered their overall risk of exposure to antineoplastic drugs not being very low. Inhalation was known to 69.2% of them as possible route of contamination. The breakroom was identified by 28.9% of them as a place of contamination. The procedure in case of accidental exposure to antineoplastic drugs was known by 69.2%, but only half could explain it. Only 38.5% said they changed their gloves every 30 min as recommended. Barely half said that they had been trained specifically for the handling of antineoplastic drugs during an initial training. Over half wished to be informed, trained and aware of the proper handling of antineoplastic drugs. CONCLUSION: Although some of these results are encouraging, specifically when compared to the other settings where antineoplastic drugs are handled, there is still room for improvement. Efforts to build an adapted and impactful training program must pursue. CLINICAL TRIAL REGISTRATION: Study CONTACT, ref. 19-504.

An ultra-high-performance chromatography method to study the long term stability of gemcitabine in dose banding conditions.

Gemcitabine is an analogue of cytidine arabinoside, used alone or in combination chemotherapy to treat various type of cancer. The dose-banding of gemcitabine provides the opportunity to anticipate the preparation of this anticancer drug on condition of carrying out stability studies. The aim of this study is to develop and validate a stability-indicating ultra-high-performance Liquid Chromatography (UHPLC) method for measuring the concentration of gemcitabine and to evaluate its stability at standardised rounded doses in polyolefin bags. The UHPLC with photodiode array (PDA) detector method was developed and validated (linearity, precision, accuracy, limits of detection and quantification, robustness and degradation test). Thirty polyolefin bags of gemcitabine (1600 mg/292 ml (n = 10), 1800 mg/297 ml (n = 10) and 2000 mg/303 ml (n = 10)) were prepared under aseptic conditions and stored at 5 ± 3 °C and 23 ± 2 °C for 49 days. Physical stability tests were periodically performed: visual and microscopic inspection and optical densities. The chemical stability was evaluated through pH monitoring and chromatographic assays. The results confirm the stability of Gemcitabine at selected standardised rounded doses of 1600 mg, 1800 mg and 2000 mg in NaCl 0.9% polyolefin bags for at least 49 days at 5 ± 3 °C and 23 ± 2 °C, allowing in-advance preparation.