RESUMEN
Electrochemical CO2 reduction reaction (CO2RR) to produce value-added multi-carbon chemicals has been an appealing approach to achieving environmentally friendly carbon neutrality in recent years. Despite extensive research focusing on the use of CO2 to produce high-value chemicals like high-energy-density hydrocarbons, there have been few reports on the production of propane (C3H8), which requires carbon chain elongation and protonation. A rationally designed 0D/2D hybrid Cu2O anchored-Ti3C2Tx MXene catalyst (Cu2O/MXene) is demonstrated with efficient CO2RR activity in an aqueous electrolyte to produce C3H8. As a result, a significantly high Faradaic efficiency (FE) of 3.3% is achieved for the synthesis of C3H8 via the CO2RR with Cu2O/MXene, which is ≈26 times higher than that of Cu/MXene prepared by the same hydrothermal process without NH4OH solution. Based on in-situ attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) and density functional theory (DFT) calculations, it is proposed that the significant electrocatalytic conversion originated from the synergistic behavior of the Cu2O nanoparticles, which bound the *C2 intermediates, and the MXene that bound the *CO coupling to the C3 intermediate. The results disclose that the rationally designed MXene-based hybrid catalyst facilitates multi-carbon coupling as well as protonation, thereby manipulating the CO2RR pathway.
RESUMEN
1D nanostructures exhibit a large surface area and a short network distance, facilitating electron and ion transport. In this study, a 1D van der Waals material, tin iodide phosphide (SnIP), is synthesized and used as an electrocatalyst for the conversion of CO2 to formate. The electrochemical treatment of SnIP reconstructs it into a web-like structure, dissolves the I and P components, and increases the number of oxygen vacancies. The resulting oxygen vacancies promote the activity of the CO2 reduction reaction (CO2RR), increasing the local pH of the electrode surface and maintaining the oxidative metal site of the catalyst despite the electrochemically reducing environment. This strategy, which stabilizes the oxidation state of the catalyst, also helps to improve the durability of CO2RR. In practice, 1D structured SnIP catalyst exhibits outstanding performance with >92% formate faradaic efficiency (FEformate) at 300 mA cm-2, a maximum partial current density for formate of 343 mA cm-2, and excellent long-term stability (>100 h at 100 mA cm-2 with >86% FEformate). This study introduced a method to easily generate oxygen vacancies on the catalyst surface by utilizing 1D materials and a strategy to improve the durability of CO2RR by stabilizing the oxidation state of the catalyst.
RESUMEN
Solution-based processing of van der Waals (vdW) one- (1D) and two-dimensional (2D) materials is an effective strategy to obtain high-quality molecular chains or atomic sheets in a large area with scalability. In this work, quasi-1D vdW Ta2Pt3Se8 was exfoliated via liquid phase exfoliation (LPE) to produce a stably dispersed Ta2Pt3Se8 nanowire solution. In order to screen the optimal exfoliation solvent, nine different solvents were employed with different total surface tensions and polar/dispersive (P/D) component (P/D) ratios. The LPE behavior of Ta2Pt3Se8 was elucidated by matching the P/D ratios between Ta2Pt3Se8 and the applied solvent, resulting in N-methyl-2-pyrrolidone (NMP) as an optimal solvent owing to the well-matched total surface tension and P/D ratio. Subsequently, Ta2Pt3Se8 nanowire thin films are manufactured via vacuum filtration using a Ta2Pt3Se8/NMP dispersion. Then, gas sensing devices are fabricated onto the Ta2Pt3Se8 nanowire thin films, and gas sensing property toward NO2 is evaluated at various thin-film thicknesses. A 50 nm thick Ta2Pt3Se8 thin-film device exhibited a percent response of 25.9% at room temperature and 32.4% at 100 °C, respectively. In addition, the device showed complete recovery within 14.1 min at room temperature and 3.5 min at 100 °C, respectively.
RESUMEN
To realize economically feasible electrochemical CO2 conversion, achieving a high partial current density for value-added products is particularly vital. However, acceleration of the hydrogen evolution reaction due to cathode flooding in a high-current-density region makes this challenging. Herein, we find that partially ligand-derived Ag nanoparticles (Ag-NPs) could prevent electrolyte flooding while maintaining catalytic activity for CO2 electroreduction. This results in a high Faradaic efficiency for CO (>90%) and high partial current density (298.39 mA cmâ2), even under harsh stability test conditions (3.4 V). The suppressed splitting/detachment of Ag particles, due to the lipid ligand, enhance the uniform hydrophobicity retention of the Ag-NP electrode at high cathodic overpotentials and prevent flooding and current fluctuations. The mass transfer of gaseous CO2 is maintained in the catalytic region of several hundred nanometers, with the smooth formation of a triple phase boundary, which facilitate the occurrence of CO2RR instead of HER. We analyze catalyst degradation and cathode flooding during CO2 electrolysis through identical-location transmission electron microscopy and operando synchrotron-based X-ray computed tomography. This study develops an efficient strategy for designing active and durable electrocatalysts for CO2 electrolysis.
RESUMEN
Herpes simplex virus 1 (HSV-1) latent infection entails repression of viral lytic genes in neurons. By functional screening using luciferase-expressing HSV-1, we identify ten neuron-specific microRNAs potentially repressing HSV-1 neuronal replication. Transfection of miR-9, the most active candidate from the screen, decreases HSV-1 replication and gene expression in Neuro-2a cells. Ectopic expression of miR-9 from lentivirus or recombinant HSV-1 suppresses HSV-1 replication in male primary mouse neurons in culture and mouse trigeminal ganglia in vivo, and reactivation from latency in the primary neurons. Target prediction and validation identify transcription factors Oct-1, a known co-activator of HSV transcription, and all three Onecut family members as miR-9 targets. Knockdown of ONECUT2 decreases HSV-1 yields in Neuro-2a cells. Overexpression of each ONECUT protein increases HSV-1 replication in Neuro-2a cells, human induced pluripotent stem cell-derived neurons, and primary mouse neurons, and accelerates reactivation from latency in the mouse neurons. Mutagenesis, ChIP-seq, RNA-seq, ChIP-qPCR and ATAC-seq results suggest that ONECUT2 can nonspecifically bind to viral genes via its CUT domain, globally stimulate viral gene transcription, reduce viral heterochromatin and enhance the accessibility of viral chromatin. Thus, neuronal miR-9 promotes viral epigenetic silencing and latency by targeting multiple host transcription factors important for lytic gene activation.
Asunto(s)
Herpes Simple , Herpesvirus Humano 1 , Células Madre Pluripotentes Inducidas , MicroARNs , Humanos , Masculino , Animales , Ratones , Herpesvirus Humano 1/genética , MicroARNs/genética , Neuronas , Herpes Simple/genética , Factores de Transcripción , Epigénesis Genética , Proteínas de HomeodominioRESUMEN
Materials with van der Waals (vdW) unit structures rely on weak interunit vdW forces, facilitating physical separation and advancing nanomaterial research with remarkable electrical properties. Recently, there has been growing interest in one-dimensional (1D) vdW materials, celebrated for their advantageous properties, characterized by reduced dimensionality and the absence of dangling bonds. In this context, we synthesize Ta2Pt3S8, a 1D vdW material, and assess its suitability for field-effect transistor (FET) applications. Spectroscopic analysis and electrical characterization confirmed that the band gap and work function of Ta2Pt3S8 are 1.18 and 4.77 eV, respectively. Leveraging various electrode materials, we fabricated n-type FETs based on Ta2Pt3S8 and identified Cr as the optimal electrode, exhibiting a high mobility of 57 cm2 V-1 s-1. In addition, we analyzed the electron transport mechanism in n-type FETs by investigating Schottky barrier height, Schottky barrier tunneling width, and contact resistance. Furthermore, we successfully fabricated p-type operating Ta2Pt3S8 FETs using a molybdenum trioxide (MoO3) layer as a high work function contact electrode. Finally, we achieved Ta2Pt3S8 nanowire rectifying diodes by creating a p-n junction with asymmetric contact electrodes of Cr and MoO3, demonstrating an ideality factor of 1.06. These findings highlight the electronic properties of Ta2Pt3S8, positioning it as a promising 1D vdW material for future nanoelectronics and functional vdW-based device applications.
RESUMEN
Productive replication of herpes simplex virus (HSV) relies upon a well-ordered transcriptional cascade flowing from immediate-early (IE) to early (E) to late (L) gene products. While several virus-encoded transcriptional activators are involved in this process, IE and E gene promoters also contain multiple binding sites for the ubiquitously expressed cellular transcription factor Sp1. Sp1 has been previously implicated in activating HSV-1 gene transcription downstream of these sites, but why Sp1-binding sites are maintained in the promoters of genes activated by virus-encoded activators remains unclear. We hypothesized that Sp1 enables continued HSV-1 transcription and replication when viral transactivators are limited. We used a depletion-based approach in human foreskin fibroblasts to investigate the specific contribution of Sp1 to the initiation and progression of the HSV-1 lytic gene cascade. We found that Sp1 increased viral transcript levels, protein expression, and replication following infection with VP16- or ICP0-deficient viruses but had little to no effect on rescued viruses or during wild-type (WT) HSV-1 infection. Moreover, Sp1 promoted WT virus transcription and replication following interferon treatment of fibroblasts and thus may contribute to viral immune evasion. Interestingly, we observed reduced expression of Sp1 and Sp1-family transcription factors in differentiated sensory neurons compared to undifferentiated cells, suggesting that reduced Sp1 levels may also contribute to HSV-1 latent infection. Overall, these findings indicate that Sp1 can promote HSV-1 gene expression in the absence of key viral transactivators; thus, HSV-1 may use Sp1 to maintain its gene expression and replication under adverse conditions.IMPORTANCEHerpes simplex virus (HSV) is a common human pathogen that actively replicates in the epithelia but can persist for the lifetime of the infected host via a stable, latent infection in neurons. A key feature of the HSV replication cycle is a complex transcriptional program in which virus and host-cell factors coordinate to regulate expression of the viral gene products necessary for continued viral replication. Multiple binding sites for the cellular transcription factor Sp1 are located in the promoters of HSV-1 genes, but how Sp1 binding contributes to transcription and replication of wild-type virus is not fully understood. In this study, we identified a specific role for Sp1 in maintaining HSV-1 gene transcription under adverse conditions, as when virus-encoded transcriptional activators were absent or limited. Preservation of Sp1-binding sites in HSV-1 gene promoters may thus benefit the virus as it navigates diverse cell types and host-cell conditions during infection.
Asunto(s)
Herpes Simple , Infecciones por Herpesviridae , Herpesvirus Humano 1 , Proteínas Inmediatas-Precoces , Infección Latente , Humanos , Herpesvirus Humano 1/fisiología , Transactivadores/genética , Proteínas Inmediatas-Precoces/genética , Factores de Transcripción/metabolismo , Replicación Viral , Expresión Génica , Regulación Viral de la Expresión GénicaRESUMEN
Combining an electrochemically stable material onto the surface of a catalyst can improve the durability of a transition metal catalyst, and enable the catalyst to operate stably at high current density. Herein, the contribution of the N-doped carbon shell (NCS) to the electrochemical properties is evaluated by comparing the characteristics of the Ni3Fe@NCS catalyst with the N-doped carbon shell, and the Ni3Fe catalyst. The synthesized Ni3Fe@NCS catalyst has a distinct overpotential difference from the Ni3Fe catalyst (ηOER = 468.8 mV, ηHER = 462.2 mV) at (200 and -200) mA cm-2 in 1 m KOH. In stability test at (10 and -10) mA cm-2, the Ni3Fe@NCS catalyst showed a stability of (95.47 and 99.6)%, while the Ni3Fe catalyst showed a stability of (72.4 and 95.9)%, respectively. In addition, the in situ X-ray Absorption Near Edge Spectroscopy (XANES) results show that redox reaction appeared in the Ni3Fe catalyst by applying voltages of (1.7 and -0.48) V. The decomposition of nickel and iron due to the redox reaction is detected as a high ppm concentration in the Ni3Fe catalyst through Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) analysis. This work presents the strategy and design of a next-generation electrochemical catalyst to improve the electrocatalytic properties and stability.
RESUMEN
In this study, the one-dimensional (1D) material V2Se9 was successfully synthesized using a colloidal method with VO(acac)2 and Se powder as precursors in a 1-octadecene solvent. The obtained colloidally synthesized V2Se9 (C-V2Se9) has an ultrathin nanobelt shape and a 4.5 times higher surface area compared with the bulk V2Se9, which is synthesized in a solid-state reaction as previously reported. In addition, all surfaces of C-V2Se9 are exposed to Se atoms, which is advantageous for storing Li through the conversion reaction into the Li2Se phase. Herein, the electrochemical performance of the C-V2Se9 anode material is evaluated; thus, the novelty of C-V2Se9 as a Se-rich 1D anode material is verified. The C-V2Se9 electrode exhibits a reversible capacity of 893.21 mA h g-1 and a Coulombic efficiency of 97.82% at the 100th cycle and excellent structural stability. Compared with the bulk V2Se9 electrode, the outstanding electrochemical performance of C-V2Se9 is attributed to its ultrathin nanobelt shape, high surface area, shorter Li diffusion length, and more electrochemically active sites. This work indicates the great potential of the Se-rich 1D material, C-V2Se9, as a post-transition metal dichalcogenide material for high-performance LIBs.
RESUMEN
Two-dimensional (2D) palladium phosphide sulfide (PdPS) has garnered significant attention, owing to its exotic physical properties originating from the distinct Cairo pentagonal tiling topology. Nevertheless, the properties of PdPS remain unexplored, especially for electronic devices. In this study, we introduce the thickness-dependent electrical characteristics of PdPS flakes into fabricated field-effect transistors (FETs). The broad thickness variation of the PdPS flakes, ranging from 0.7-306 nm, is prepared by mechanical exfoliation, utilizing large bulk crystals synthesized via chemical vapor transport. We evaluate this variation and confirm a high electron mobility of 14.4 cm2 V-1 s-1 and Ion/Ioff > 107. Furthermore, the 6.8 nm-thick PdPS FET demonstrates a negligible Schottky barrier height at the gold electrode contact, as evidenced by the measurement of the temperature-dependent transfer characteristics. Consequently, we adjusted the Fowler-Nordheim tunneling mechanism to elucidate the charge-transport mechanism, revealing a modulated mobility variation from 14.4 to 41.2 cm2 V-1 s-1 with an increase in the drain voltage from 1 to 5 V. The present findings can broaden the understanding of the unique properties of PdPS, highlighting its potential as a 2D ternary chalcogenide in future electronic device applications.
RESUMEN
Direct partial oxidation of methane to liquid oxygenates has been regarded as a potential route to valorize methane. However, CH4 activation usually requires a high temperature and pressure, which lowers the feasibility of the reaction. Here, we propose an electro-assisted approach for the partial oxidation of methane, using in-situ cathodically generated reactive oxygen species, at ambient temperature and pressure. Upon using acid-treated carbon as the electrocatalyst, the electro-assisted system enables the partial oxidation of methane in an acidic electrolyte to produce oxygenated liquid products. We also demonstrate a high production rate of oxygenates (18.9 µmol h-1) with selective HCOOH production. Mechanistic analysis reveals that reactive oxygen species such as âOH and âOOH radicals are produced and activate CH4 and CH3OH. In addition, unstable CH3OOH generated from methane partial oxidation can be additionally reduced to CH3OH on the cathode, and so-produced CH3OH is further oxidized to HCOOH, allowing selective methane partial oxidation.
RESUMEN
Single-atom catalysts (SACs) are appealing next-generation catalysts for various electrochemical technologies. Along with significant breakthroughs in their initial activity, SACs now face the next challenge for their viable applications, insufficient operational stability. In this Minireview, we summarize the current knowledge of SAC degradation mechanisms mainly based on Fe-N-C SACs, some of the most investigated SACs. Recent studies on isolated metal, ligand, and support degradations are introduced, and the underlying fundamentals of each degradation path are categorized into active site density (SD) and turnover frequency (TOF) losses. Finally, we discuss the challenges and prospects for the future outlook of stable SACs.
RESUMEN
Securing the electrochemical durability of noble metal platinum is of central importance for the successful implementation of a proton exchange membrane fuel cell (PEMFC). Pt dissolution, a major cause of PEMFC degradation, is known to be a potential-dependent transient process, but its underlying mechanism is puzzling. Herein, we elucidate a chemical Pt dissolution process that can occur in various electrocatalytic conditions. This process intensively occurs during potential perturbations with a millisecond timescale, which has yet to be seriously considered. The open circuit potential profiles identify the dominant formation of metastable Pt species at such short timescales and their simultaneous dissolution. Considering on these findings, a proof-of-concept strategy for alleviating chemical Pt dissolution is further studied by tuning electric double layer charging. These results suggest that stable Pt electrocatalysis can be achieved if rational synthetic or systematic strategies are further developed.
RESUMEN
Carbon capture and utilization technology has been studied for its practical ability to reduce CO2 emissions and enable economical chemical production. The main challenge of this technology is that a large amount of thermal energy must be provided to supply high-purity CO2 and purify the product. Herein, we propose a new concept called reaction swing absorption, which produces synthesis gas (syngas) with net-zero CO2 emission through direct electrochemical CO2 reduction in a newly proposed amine solution, triethylamine. Experimental investigations show high CO2 absorption rates (>84%) of triethylamine from low CO2 concentrated flue gas. In addition, the CO Faradaic efficiency in a triethylamine supplied membrane electrode assembly electrolyzer is approximately 30% (@-200 mA cm-2), twice higher than those in conventional alkanolamine solvents. Based on the experimental results and rigorous process modeling, we reveal that reaction swing absorption produces high pressure syngas at a reasonable cost with negligible CO2 emissions. This system provides a fundamental solution for the CO2 crossover and low system stability of electrochemical CO2 reduction.
RESUMEN
A quasi-one-dimensional van der Waals metallic nanowire Nb2 PdS6 is synthesized, and its electrical characteristics are analyzed. The chemical vapor transport method is applied to produce centimeter-scale Nb2 PdS6 crystals with needle-like structures and X-ray diffraction (XRD) confirms their high crystallinity. Scanning transmission electron microscopy reveals the crystal orientation and atomic arrangement of the specific region with atomic resolution. The electrical properties are examined by delaminating bulk Nb2 PdS6 crystals into a few nanometer-scale wires onto 100 nm-SiO2 /Si substrates using a mechanical exfoliation process. Ohmic behavior is confirmed at the low-field measurements regardless of their thickness variation, and 4.64 nm-thick Nb2 PdS6 shows a breakdown current density (JBD ) of 52 MA cm-2 when the high electrical field is delivered. Moreover, with further exfoliation down to a single atomic chain, the JBD of Nb2 PdS6 is predicted to have a value of 527 MA cm-2 . The breakdown of Nb2 PdS6 proceeds due to the Joule heating mechanism, and the Nb2 PdS6 nanowires are well fitted to the 1D thermal dissipating model.
RESUMEN
Recombinant herpes simplex virus strains can be constructed by several methods, including homologous recombination, bacterial artificial chromosome manipulation, and yeast genetic methods. Homologous recombination may have the advantage of introducing fewer genetic alterations in the viral genome, but the low level of recombinants can make this method more time consuming if there is no screen or selection. In this study we used complementing cell lines that express Cas9 and guide RNAs targeting the parental virus to rapidly generate recombinant viruses. Analysis of the progeny viruses indicated that CRISPR-Cas9 both promoted recombination to increase recombinant viruses and selected against parental viruses in the transfection progeny viruses. This approach can also be used to enrich for recombinants made by any of the current methods.
RESUMEN
Low-dimensional Nb2Se9 nanocrystals were synthesised through a simple one-pot colloidal synthesis with C18 organic solvents (octadecane, oleylalcohol, octadecanethiol, octadecene (ODE), and oleylamine (OLA)) of varied terminal functional groups. The solvent with high reducing power facilitated the nucleation of the nanoparticle, lowering threshold concentration and broadening the concentration spectrum. As a solvent, reducing agent, and capping agent, ODE functions as a primary factor in the synthesis of high-quality Nb2Se9 nanorods. We further discuss the unique adhesion role of ODE under the co-solvent system and demonstrate morphology control through synergism between ODE and OLA, verified by the electrochemical measurements.
RESUMEN
Electrocatalysis, whose reaction venue locates at the catalyst-electrolyte interface, is controlled by the electron transfer across the electric double layer, envisaging a mechanistic link between the electron transfer rate and the electric double layer structure. A fine example is in the CO2 reduction reaction, of which rate shows a strong dependence on the alkali metal cation (M+) identity, but there is yet to be a unified molecular picture for that. Using quantum-mechanics-based atom-scale simulation, we herein scrutinize the M+-coupling capability to possible intermediates, and establish H+- and M+-associated ET mechanisms for CH4 and CO/C2H4 formations, respectively. These theoretical scenarios are successfully underpinned by Nernstian shifts of polarization curves with the H+ or M+ concentrations and the first-order kinetics of CO/C2H4 formation on the electrode surface charge density. Our finding further rationalizes the merit of using Nafion-coated electrode for enhanced C2 production in terms of enhanced surface charge density.
RESUMEN
The electrosynthesis of formate from CO2 can mitigate environmental issues while providing an economically valuable product. Although stannic oxide is a good catalytic material for formate production, a metallic phase is formed under high reduction overpotentials, reducing its activity. Here, using a fluorine-doped tin oxide catalyst, a high Faradaic efficiency for formate (95% at 100 mA cm-2) and a maximum partial current density of 330 mA cm-2 (at 400 mA cm-2) is achieved for the electroreduction of CO2. Furthermore, the formate selectivity (≈90%) is nearly constant over 7 days of operation at a current density of 100 mA cm-2. In-situ/operando spectroscopies reveal that the fluorine dopant plays a critical role in maintaining the high oxidation state of Sn, leading to enhanced durability at high current densities. First-principle calculation also suggests that the fluorine-doped tin oxide surface could provide a thermodynamically stable environment to form HCOO* intermediate than tin oxide surface. These findings suggest a simple and efficient approach for designing active and durable electrocatalysts for the electrosynthesis of formate from CO2.
RESUMEN
Computational calculations and experimental studies reveal that the CoOOH phase and the intermediate-spin (IS) state are the key factors for realizing efficient Co-based electrocatalysts for the oxygen evolution reaction (OER). However, according to thermodynamics, general cobalt oxide converts to the CoO2 phase under OER condition, retarding the OER kinetics. Herein, we demonstrate a simple and scalable strategy to fabricate electrodes with maintaining Fe-CoOOH phase and an IS state under the OER. The changes of phase and spin states were uncovered by combining in-situ/operando X-ray based absorption spectroscopy and Raman spectroscopy. Electrochemical reconstruction of chalcogenide treated Co foam affords a highly enlarged active surface that conferred excellent catalytic activity and stability in a large-scale water electrolyzer. Our findings are meaningful in that the calculated results were experimentally verified through the operando analyses. It also proposes a new strategy for electrode fabrication and confirms the importance of real active phases and spin states under a particular reaction condition.