Verification of acromion marker cluster and scapula spinal marker cluster methods for tracking shoulder kinematics: a comparative study with upright four-dimensional computed tomography.

BACKGROUND: This study validated the accuracy of the acromion marker cluster (AMC) and scapula spinal marker cluster (SSMC) methods compared with upright four-dimensional computed tomography (4DCT) analysis. METHODS: Sixteen shoulders of eight healthy males underwent AMC and SSMC assessments. Active shoulder elevation was tracked using upright 4DCT and optical motion capture system. The scapulothoracic and glenohumeral rotation angles calculated from AMC and SSMC were compared with 4DCT. Additionally, the motion of these marker clusters on the skin with shoulder elevation was evaluated. RESULTS: The average differences between AMC and 4DCT during 10°-140° of humerothoracic elevation were - 2.2° ± 7.5° in scapulothoracic upward rotation, 14.0° ± 7.4° in internal rotation, 6.5° ± 7.5° in posterior tilting, 3.7° ± 8.1° in glenohumeral elevation, - 8.3° ± 10.7° in external rotation, and - 8.6° ± 8.9° in anterior plane of elevation. The difference between AMC and 4DCT was significant at 120° of humerothoracic elevation in scapulothoracic upward rotation, 50° in internal rotation, 90° in posterior tilting, 120° in glenohumeral elevation, 100° in external rotation, and 100° in anterior plane of elevation. However, the average differences between SSMC and 4DCT were - 7.5 ± 7.7° in scapulothoracic upward rotation, 2.0° ± 7.0° in internal rotation, 2.3° ± 7.2° in posterior tilting, 8.8° ± 7.9° in glenohumeral elevation, 2.0° ± 9.1° in external rotation, and 1.9° ± 10.1° in anterior plane of elevation. The difference between SSMC and 4DCT was significant at 50° of humerothoracic elevation in scapulothoracic upward rotation and 60° in glenohumeral elevation, with no significant differences observed in other rotations. Skin motion was significantly smaller in AMC (28.7 ± 4.0 mm) than SSMC (38.6 ± 5.8 mm). Although there was smaller skin motion in AMC, SSMC exhibited smaller differences in scapulothoracic internal rotation, posterior tilting, glenohumeral external rotation, and anterior plane of elevation compared to 4DCT. CONCLUSION: This study demonstrates that AMC is more accurate for assessing scapulothoracic upward rotation and glenohumeral elevation, while SSMC is preferable for evaluating scapulothoracic internal rotation, posterior tilting, glenohumeral external rotation, and anterior plane of elevation, with smaller differences compared to 4DCT.

Three cases of open surgical procedures on ileal conduits for the repair of benign ureteroenteric anastomotic strictures after total pelvic exenteration of rectal tumors.

Ureteroenteric anastomotic strictures (UEAS) are typical complications after creating an ileal conduit for total pelvic exenteration (TPE) of rectal tumors. We report the ileal conduit for reconstruction in three patients, in the age-range of 47-73 years. Case 1 was when a left-sided UEAS had sufficient length of ureter for anastomosis, Case 2 was a right-sided UEAS with sufficient length of ureter for anastomosis, and Case 3 was a left-sided UEAS with insufficient length of ureter for anastomosis. There were no complications after operation and no recurrence of UEAS. It is important to learn the open surgical procedures for repair of a benign UEAS after TPE of rectal cancers. This has fewer complications and is safe in the long term.

How many times can patients tolerate reoperation for the local recurrence of colorectal cancer in terms of complications?

The frequency of resection for the recurrence of colorectal cancer has not been investigated in previous studies. Likewise, the related postoperative complications and the limit for indicating surgical resection has not been reported. Herein, we reported the complications of a highly frequent surgical approach for rectal cancer recurrence, i.e., exceeding three reoperations, based on our clinical experience. We included 15 cases exceeding two operations for the local recurrence of colorectal cancer from 2014 to 2019. We examined the postoperative complications classified as Clavien?Dindo IIIb. The positive rates of the complications were 0 (0.0%), 0 (0.0%), 2 (13.3%), 3 (37.5%), and 0 (0.0%) for the primary, 1st recurrent, 2nd recurrent, 3rd recurrent, and 4th recurrent operation group (p=0.027), respectively. It is important to exercise caution in handling cases exceeding two reoperations (exceeding three reoperations including the primary operation). J. Med. Invest. 70 : 369-376, August, 2023.

Influence of Proximal Humeral Cortical Bone Thickness on the Radiographic Outcome After Osteosynthesis of Proximal Humeral Fractures: Propensity Matching Score Analysis.

Introduction: Osteoporosis can affect the surgical outcomes of proximal humeral fractures in older people. Recently, the cortical bone thickness of the proximal humerus on plain radiograph has been proposed to reflect local osteoporosis of the proximal humerus; however, its effect on the surgical outcome of proximal humeral fractures remains unclear. The purpose of this study is to investigate the influence of cortical bone thickness on postoperative radiographic outcomes after osteosynthesis for proximal humeral fractures. Materials and Methods: We retrospectively identified 190 patients (≥50 years) who underwent osteosynthesis with an intramedullary nail or plate for proximal humeral fractures. The patients were categorized into 2 groups according to the cut-off value of an average proximal humerus cortical bone thickness of 6 mm on plain radiographs: patients with and without local osteoporosis. After propensity score matching, we compared the incidence of postoperative radiographic complications between the 2 groups. We also performed subgroup analyses of outcomes in a subgroup of patients who underwent intramedullary nailing and those who underwent plate fixation. Results: Propensity score matching yielded 60 patients in each group. No significant difference in complication rates was observed between the 2 groups. However, in the intramedullary nailing subgroup, the incidence of reduction loss was significantly higher in patients with local osteoporosis than in those without local osteoporosis (51.7% vs 14.3%, P = .002). Discussion: The proximal humeral cortical bone thickness had no significant effect on the overall radiographic outcome; however, reduction loss after intramedullary nailing was susceptible to local osteoporosis of the proximal humerus. Conclusion: Our study suggests that plate fixation is advantageous in preventing postoperative reduction loss in patients with lower cortical bone thickness.

Dynamic evaluation of the sternoclavicular and acromioclavicular joints using an upright four-dimensional computed tomography.

In the analysis of the shoulder complex, the sequential changes occurring in the sternoclavicular and acromioclavicular joints during active shoulder motion are challenging to track. This study aimed to investigate the in vivo sternoclavicular and acromioclavicular joint motions during active elevation, including the sequential changes in these joint spaces using upright four-dimensional computed tomography (4DCT). Bilateral shoulders of 12 healthy volunteers upright 4DCT were obtained during active elevation similar to a "hands up" motion. The sternoclavicular and acromioclavicular rotation angles, joint distances, and closest points on the clavicle relative to the thorax and scapula were evaluated during 10°-140° of humerothoracic elevation. During humerothoracic elevation, the clavicle elevated, retracted, and rotated posteriorly relative to the thorax, whereas the scapula rotated upwardly, internally, and posteriorly relative to the clavicle. All the sternoclavicular and acromioclavicular joint rotation angles were significantly different at ≥ 30°-50° of humerothoracic elevation compared with 10° of humerothoracic elevation. The mean sternoclavicular and acromioclavicular joint distances were 2.2 ± 1.1 mm and 1.6 ± 0.9 mm, respectively. The closest points were located on the anteroinferior part of the medial and lateral clavicle in the sternoclavicular and acromioclavicular joints, respectively. Significant differences were observed in the acromioclavicular joint distance and anterior/posterior movements of the closest points in the sternoclavicular and acromioclavicular joints compared with 10° of humerothoracic elevation. Our sternoclavicular and acromioclavicular closest point results indicate that the impingement tends to occur at the anteroinferior part of the medial and lateral aspects of the clavicle and may be related to osteoarthritis.

Total Pelvic Exenteration Combined With Sacral Resection for Rectal Cancer.

BACKGROUND: This retrospective study aimed to demonstrate surgical operative approach of total pelvic exenteration combined with sacral resection with rectal cancer and elucidate the relationships between the level of sacral resection and short-term outcomes. METHODS: Twenty cases were selected. Data regarding sex, age, body mass index, neoadjuvant therapy, location of sacral resection ("Upper" or "Lower" relative to the level between the 3rd and 4th sacral segment), operative time, bleeding, and curability (R0/R1) were collected and compared to determine their association with complications exhibiting a Clavien-Dindo grade III. RESULTS: The complication rate was significantly higher for recurrent cancers (n = 10, 76.9%) than for primary cancers (n = 1, 14.3%) (P = .007), and for "Upper" resection (n = 8, 72.7%) than for "Lower" resection (n = 3, 33.3%) (P = .078). Significant differences were observed when complication rates for "Lower" and primary cancer resection (n = 3, .0%) were compared between "Upper" and recurrent cancers (n = 8, 100.0%) (P = .007). CONCLUSION: In patients with recurrent rectal cancer, "Upper" sacral resection during total pelvic exenteration is associated with a high complication rate, highlighting the need for careful monitoring.

Three-dimensional shoulder kinematics: Upright four-dimensional computed tomography in comparison with an optical three-dimensional motion capture system.

Although shoulder kinematics have been analyzed by various methods, dynamic shoulder motion is difficult to track. This study aimed to validate the shoulder kinematic analysis using upright four-dimensional computed tomography (4DCT) and to compare the results with optical three-dimensional motion capture. During active elevation, bilateral shoulders of 10 healthy volunteers were tracked using 4DCT and motion capture. The scapulothoracic and glenohumeral rotations and the scapulohumeral rhythm (SHR) at each position were calculated, and the differences between 4DCT and motion capture were compared. During 10-140° of humerothoracic elevation, the scapulothoracic joint showed upward rotation, internal rotation, and posterior tilting, and the glenohumeral joint showed elevation, external rotation, and anterior plane of elevation in both analyses. In scapulothoracic rotations, the mean differences between the two analyses were -2.6° in upward rotation, 13.9° in internal rotation, and 6.4° in posterior tilting, and became significant with humerothoracic elevation ≥110° in upward rotation, ≥50° in internal rotation, and ≥100° in posterior tilting. In glenohumeral rotations, the mean differences were 3.7° in elevation, 9.1° in internal rotation, and -8.8° in anterior plane of elevation, and became significant with humerothoracic elevation ≥110° in elevation, ≥90° in internal rotation, and ≥100° in anterior plane of elevation. The mean overall SHRs were 1.8 in 4DCT and 2.4 in motion capture, and the differences became significant with humerothoracic elevation ≥100°. The 4DCT analysis of in vivo shoulder kinematics using upright computed tomography scanner is feasible, but the values were different from those by skin-based analysis at the elevated arm positions.

In Vivo Metacarpophalangeal Joint Kinematics After Silicone Implant Arthroplasty in Patients With Rheumatoid Arthritis.

PURPOSE: The aim of this study was to determine the potential mechanism of implant fracture using 3-dimensional motion analysis of patients with rheumatoid arthritis. METHODS: Active flexion motion in 9 hands (34 fingers) of 6 female patients with rheumatoid arthritis who previously underwent hinged silicone metacarpophalangeal joint arthroplasty was examined using 4-dimensional computed tomography. Positions of the proximal phalanges relative to the metacarpals were quantified using a surface registration method. The deformation of the silicone implant was classified in the sagittal plane in the maximum flexion frame. The longitudinal bone axis of the proximal phalanx and the helical axis of the proximal phalanx were evaluated in 3-dimensional coordinates based on the hinge of the silicone implant. RESULTS: Nineteen fingers were classified into group 1, in which the silicone implant moved volarly during flexion without buckling of the distal stem. Twelve fingers were classified into group 2, in which the distal stem of the silicone implant buckled. Three fingers were classified into group 3, in which the base of the distal stem had already fractured. Quantitatively, the longitudinal bone axes of the proximal phalanges were displaced from dorsal to volar in the middle stage of flexion and migrated in the proximal direction in the late phase of flexion. The helical axes of the proximal phalanges were located on the dorsal and proximal sides of the hinge, and these tended to move in the volar and proximal directions as the metacarpophalangeal joint flexed. CONCLUSIONS: Volar and proximal translation of the proximal phalange was observed on 4-dimensional computed tomography. CLINICAL RELEVANCE: Proximal displacement of the bone axis late in flexion appears to be a contributing factor inducing implant fractures, because the pistoning motion does not allow the implant to move in the proximal direction.

Inferior subluxation of humeral head after osteosynthesis for greater tuberosity fracture.

BACKGROUND: Inferior subluxation of the humeral head is frequently observed immediately after surgery for proximal humerus fractures; however, the incidence and risk factors of inferior subluxation after osteosynthesis for isolated greater tuberosity fractures remain unsolved. Additionally, the postoperative course of inferior subluxation has not been elucidated. The purpose of the present study is to identify the predictors for the occurrence of postoperative inferior subluxation by multivariate analysis and investigate the postoperative shift of inferior subluxation and its effect on surgical outcomes. METHODS: We retrospectively identified 68 patients who underwent surgery for isolated greater tuberosity fractures. The dependent variable was the inferior subluxation at 1 week postoperatively. The explanatory variables were age, sex, affected side of the shoulder, body mass index, history of smoking, local osteoporosis, time period to surgery, axillary nerve injury, inferior subluxation before surgery, fracture dislocation, surgical approach, surgical method, operative time, amount of blood loss, and postoperative drainage. Baseline variables that were statistically significant in the univariate analyses were included in the logistic regression analysis. The patients were further categorized into two groups according to the presence of inferior shoulder subluxation exhibited 1 week postoperatively: patients with inferior subluxation (+ IS group) and patients without inferior subluxation (- IS group). We compared the incidence of postoperative complications between the two groups. RESULTS: Of 68 patients, 17 (25.0%) had inferior shoulder subluxation observed 1 week postoperatively. Multivariate analysis showed that long operative time was a risk factor for postoperative subluxation (odds ratio = 1.03; P = 0.030). In all cases, inferior subluxation disappeared within 3 months of surgery. No significant difference in complication rate was observed between the + IS and - IS groups. CONCLUSIONS: The present study provides novel information regarding postoperative inferior subluxation of fractures of the greater tuberosity. Inferior subluxation occurred in 25% of patients immediately after surgery. Long operative time contributes to the onset of postoperative inferior subluxation; however, this was temporary in all cases and had no significant effect on the surgical outcomes. LEVEL OF EVIDENCE: Level III.

Risk factors of radiographic severity of massive rotator cuff tear.

As massive rotator cuff tears progress, various radiographic changes occur; however, the factors associated with radiographic changes remain largely unknown. This study aimed to determine the factors that affect radiographic severity in massive rotator cuff tears using multivariate analyses. We retrospectively reviewed 210 shoulders with chronic massive rotator cuff tears. The dependent variables were superior migration of the humeral head (Hamada grades 2-3), narrowing of the glenohumeral joint (grade 4), and humeral head collapse (grade 5). Baseline variables that were significant in univariate analyses were included in multivariate models. There were 91, 59, 43, and 17 shoulders classified as Hamada grades 1, 2-3, 4, and 5, respectively. Multivariate analysis showed that infraspinatus tear (P = 0.015) and long head of biceps (LHB) tendon rupture (P = 0.007) were associated with superior migration of humeral head. Superior subscapularis tear (P = 0.003) and LHB tendon rupture (P < 0.001) were associated with narrowing of glenohumeral joint. Female sex (P = 0.006) and superior subscapularis tear (P = 0.006) were associated with humeral head collapse. This study identified the rupture of infraspinatus and LHB as risk factors of superior migration of humeral head, and the rupture of subscapularis and LHB and female sex as risk factors of cuff tear arthropathy.

Knee varus alters three-dimensional ankle alignment in standing- a study with upright computed tomography.

BACKGROUND: For knee osteoarthritis (OA) treatment, it is important to correct the lower limb alignment including the foot. However, in the upright position, lower limb alignment is generally assessed from the body surface or radiographs, and it is a challenge to capture the exact characteristics of three-dimensional lower limb alignment. The purpose of the study was to measure lower limb alignment in patients with knee OA using upright computed tomography (CT) and radiography, and to identify features of knee joint deformity. METHODS: A total of 45 limbs in 25 patients with knee OA were enrolled. The subjects underwent both upright CT and radiography for the whole lower limb in the standing position. The joint angles were calculated on both images. The degree of knee OA was classified according to Kellgren-Lawrence (KL) grade by referring to radiography, which is mainly based on the degree of articular cartilage loss and severity of osteophytes, and the characteristics or correlation between knee and ankle joint in each group was investigated. RESULTS: In KL-I, there was an association between varus of the knee joint and internal rotation of the talocrural joint (r = 0.76, P < 0.05). In KL-II, there was an association between varus of the knee joint and eversion of the subtalar joint (r = 0.63, P < 0.05) and talocrural joint (r = - 0.65, P < 0.05). In KL-III, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = - 0.62, P < 0.05), and in KL-IV, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = - 0.58, P < 0.05). CONCLUSIONS: The lower limb alignment of patients with knee OA in the standing position was found that as knee OA worsened, it became apparent that compensatory knee joint alignment depended on the ankle joint rather than the subtalar joint. The results may help in the rehabilitation of patients with knee OA, since the ankle joint alignment has a significant impact on the knee joint during coarse movements involving load.

Three-dimensional alignment of the upper extremity in the standing neutral position in healthy subjects.

BACKGROUND: Though alignment of the spine and lower extremities in the standing neutral position has been evaluated, a few studies evaluating the alignment of the upper extremities have also been made. This study assessed the normal alignment of the upper extremities in the standing neutral position and clarified the three-dimensional angular rotations of the upper extremity joints. METHODS: Computed tomography (CT) images of 158 upper extremities from 79 healthy volunteers were prospectively acquired in the standing neutral position using an upright CT scanner. Three-dimensional coordinate systems of the thorax, scapula, humerus, and forearm were designated, and three-dimensional angular rotations of the scapulothoracic, glenohumeral, and elbow joints were calculated. RESULTS: The median angle of the scapulothoracic joint was 9.2° (interquartile range [IQR], 5.2°-12.5°) of upward rotation, 29.0° (IQR, 24.9°-33.3°) of internal rotation, and 7.9° (IQR, 4.3°-11.8°) of anterior tilt. The median angle of the glenohumeral joint was 4.5° (IQR, 0.9°-7.8°) of abduction, 9.0° (IQR, 2.2°-19.0°) of internal rotation, and 0.3° (IQR, - 2.6°-3.1°) of extension. The median angle of the elbow joint was 9.8° (IQR, 6.9°-12.4°) of valgus, 90.2° (IQR, 79.6°-99.4°) of pronation, and 15.5° (IQR, 13.2°-18.1°) of flexion. Correlations in angular rotation values were found between the right and left upper extremities and between joints. CONCLUSIONS: This study clarified the three-dimensional angular rotation of upper extremity joints in the standing neutral position using an upright CT scanner. Our results may provide important insights for the functional evaluation of upper extremity alignment.

Increase in tibial internal rotation due to weight-bearing is a key feature to diagnose early-stage knee osteoarthritis: a study with upright computed tomography.

BACKGROUND: The classification of knee osteoarthritis is an essential clinical issue, particularly in terms of diagnosing early knee osteoarthritis. However, the evaluation of three-dimensional limb alignment on two-dimensional radiographs is limited. This study evaluated the three-dimensional changes induced by weight-bearing in the alignments of lower limbs at various stages of knee osteoarthritis. METHODS: Forty five knees of 25 patients (69.9 ± 8.9 years) with knee OA were examined in the study. CT images of the entire leg were obtained in the supine and standing positions using conventional CT and 320-row detector upright CT, respectively. Next, the differences in the three-dimensional alignment of the entire leg in the supine and standing positions were obtained using 3D-3D surface registration technique, and those were compared for each Kellgren-Lawrence grade. RESULTS: Greater flexion, adduction, and tibial internal rotation were observed in the standing position, as opposed to the supine position. Kellgren-Lawrence grades 1 and 4 showed significant differences in flexion, adduction, and tibial internal rotation between two postures. Grades 2 and 4 showed significant differences in adduction, while grades 1 and 2, and 1 and 3 showed significant differences in tibial internal rotation between standing and supine positions. CONCLUSIONS: Weight-bearing makes greater the three-dimensional deformities in knees with osteoarthritis. Particularly, greater tibial internal rotation was observed in patients with grades 2 and 3 compared to those with grade 1. The greater tibial internal rotation due to weight-bearing is a key pathologic feature to detect early osteoarthritic change in knees undergoing osteoarthritis.

Four-dimensional computed tomographic analysis of screw home movement in patients with anterior cruciate ligament deficient knee - a 3D-3D registration technique.

OBJECTIVE: The tibia externally rotates to the femur during the last 20° of the knee extension motion. This kinematic phenomenon is well known as screw home movement (SHM). The purpose was to clarify the SHM in anterior cruciate ligament deficient (ACLD) knee using four-dimensional computed tomography (4DCT). MATERIALS AND METHODS: Six patients with a unilateral isolated ACLD knee participated. In the static position, CT scan of the both limbs of the femur and tibia were performed. Then, 4DCT was performed around knee. In the CT gantry, subjects were positioned in supine position with 45° of knee flexion on a triangle pillow and were asked to extend the knee to full extension within 10 s on each limb. The CT data were accumulated in digital imaging and communication in medicine (DICOM) data format. From the static CT and 4DCT DICOM data, three-dimensional surfaces of the knee joint were reconstructed. The whole tibia surface was matched into the partial tibia surface of that frame using 3D-3D registration technique. After the assessment of coordination system of the whole leg, knee flexion, abduction, and external rotation angle were calculated. RESULTS: Knee external rotation angle was significantly smaller on the ACLD side than on the contralateral unaffected side in 0-15° of knee flexion (P < 0.05 in 0, 5, 10, and 15 degrees), while the angle was similar during 15-60° of knee flexion. CONCLUSION: The absence of SHM in ACLD knee was detected using 3D-3D registration technique based on 4DCT.

Risk Factors for Loss of Active Shoulder Range of Motion in Massive Rotator Cuff Tears.

BACKGROUND: Patients with massive rotator cuff tears often exhibit loss of active range of shoulder motion, which can interfere with activities of daily living. The risk factors for loss of motion remain largely unknown. PURPOSE: To clarify the predictive factors that affect the range of motion in chronic massive rotator cuff tears using multivariate analyses. STUDY DESIGN: Case-control study; Level of evidence, 3. METHODS: The authors retrospectively reviewed 204 consecutive patients who were evaluated at their institution with chronic massive rotator cuff tears. In this study, the dependent variable was determined to be active anterior elevation limited to ≤90° or external rotation (ER) with the arm at the side limited to ≤0°. Explanatory variables included age; sex; affected side; duration of symptoms; smoking history; existence of diabetes, hypertension, or rheumatoid arthritis; involved tendons; presence of a 3-tendon tear; rupture of the long head of biceps tendon; superior migration of the humeral head; and cuff tear arthropathy. Baseline variables that were observed to be significant in the univariate analyses were included in multivariate models, which used logistic regression to identify independent predictors of loss of motion. RESULTS: Overall, 73 patients (35.8%) exhibited limited anterior elevation, and 27 (13.2%) exhibited limited ER. Multivariate analyses showed that inferior subscapularis tear (odds ratio [OR], 14.66; 95% CI, 2.95-72.93; P = .001), smoking (OR, 4.13; 95% CI, 1.94-8.79; P < .001), superior migration of humeral head (OR, 3.92; 95% CI, 1.80-8.53; P = .001), and 3-tendon tear (OR, 3.29; 95% CI, 1.32-8.20; P = .011) were significantly associated with the loss of anterior elevation. Teres minor tear (OR, 73.37; 95% CI, 9.54-564.28; P < .001) and superior migration of the humeral head (OR, 3.55; 95% CI, 1.04-12.19; P = .044) were significantly associated with loss of ER. CONCLUSION: In the current study, a history of smoking, type of torn tendons, and superior migration of the humeral head were associated with loss of active shoulder motion. In particular, the status of inferior subscapularis or teres minor contributed to the onset of pseudoparalysis in massive rotator cuff tears.

Repair of antegrade anastomosis between ileal segment and amputated ureter for recurrent rectal cancer.

We describe a case of repair of the antegrade anastomosis between the "ileal segment" and amputated ureter for recurrent rectal cancer, in which some postoperative complications occurred but eventually resolved. If the length of the ureter is inadequate for end-to-end anastomosis, an ileal segment can be used as a conduit. This surgical technique is not difficult because an ileal conduit is typically created during total pelvic exenteration of rectal cancers. Therefore, anastomosing the ureter to an "ileal segment" is easy and feasible. Hence, we consider that knowledge of this technique would be beneficial for surgical oncologists who perform colorectal surgeries.

Residual coracoclavicular separation after plate fixation for distal clavicle fractures: comparison between fracture patterns.

BACKGROUND: Plate fixation is an established treatment for Neer type II and V distal clavicle fractures; however, residual coracoclavicular (C-C) separation after osteosynthesis for unstable distal clavicle fractures has rarely been discussed. This study aimed to reveal the extent of postoperative C-C separation after plate fixation for distal clavicle fractures and to evaluate the relationship between residual C-C separation and the risk of postoperative complications. METHODS: We retrospectively reviewed 60 patients with a displaced distal clavicle fracture that was treated with a Scorpion plate without C-C reconstruction and successfully united. Distal clavicle fractures were divided as per the Neer classification into type IIA (12 patients), IIB (36 patients), and V (12 patients) groups. The modified C-C distance ratio at the time of injury and after bone union, and the postoperative complications (plate-related pain, delayed union, infection, and contracture) were compared among the three groups. RESULTS: The mean postoperative modified C-C distance ratio was 115.0% ± 12.0%; this ratio was significantly larger in the type IIB and V groups than in the type IIA group (P = .021 and P = .006, respectively). However, there was no significant difference in the frequency of postoperative complications among the three groups. CONCLUSIONS: Our study demonstrated that a certain degree of C-C separation remained after plate fixation for Neer type II and V distal clavicle fractures, even when bone union was achieved. The postoperative residual C-C separation was greater for the type IIB and V groups than for the type IIA group; however, this difference may not affect postoperative complications.

Risk factors and prognosis of humeral head inferior subluxation in proximal humeral fractures after osteosynthesis.

BACKGROUND: Humeral head inferior subluxation often occurs immediately after osteosynthesis for proximal humeral fracture; however, the underlying cause remains largely unknown. In addition, the prognosis of postoperative inferior subluxation has not been fully investigated. This study aimed to clarify the predictive factors that affected the onset of postoperative inferior subluxation using multivariate analysis and examine the postoperative course of inferior subluxation and its influence on postoperative outcomes. METHODS: We retrospectively reviewed 212 patients who underwent osteosynthesis for Neer 2- or 3-part proximal humeral fractures. In the multivariate analysis, the dependent variable was set as the inferior subluxation observed 1 week after the surgery. The explanatory variables included age, sex, affected side, body mass index, smoking, local osteoporosis, preoperative axillary nerve injury, time from injury to surgery, fracture dislocation, fracture pattern, preoperative inferior subluxation, surgical procedure, surgical approaches, blood loss, operative time, and postoperative drainage. Baseline variables, which were observed to be significant in the univariate analysis, were included in multivariate models. Furthermore, based on the presence of inferior subluxation at 1 week after the surgery, we divided the patients into two groups: with inferior subluxation (+IS group) and without inferior subluxation (-IS group). We compared the postoperative outcomes (incidence of postoperative complications and range of motion) between these two groups. RESULTS: Of 212 patients, 64 (30.7%) experienced inferior subluxation at 1 week after the surgery. On multivariate analyses, preoperative inferior subluxation (odds ratio = 4.69; 95% confidence interval = 2.45-9.76; P < .001) and longer operative time (odds ratio = 1.01; 95% confidence interval = 1.00-1.02; P = .049) were the risk factors for postoperative inferior subluxation. In the +IS group, inferior subluxation resolved at 1 year after the surgery in 89.5% of patients. There was no significant difference in the postoperative outcome between the +IS and -IS groups. However, four of six patients with persistent inferior subluxation, more than 6 months after the surgery, experienced complications, such as varus angulation of the humeral head or screw joint perforation. CONCLUSIONS: This study provides new information on the risk factors for and prognosis of postosteosynthesis inferior subluxation in patients with proximal humeral fracture. Longer operative time and presence of preoperative inferior subluxation was associated with an increased risk of postoperative inferior subluxation, although it was temporary in most cases, and had no significant influence on the postoperative outcomes. However, in patients with persistent inferior subluxation of more than 6 months duration, inferior subluxation may be related to postoperative complications.

Factors related to large bone defects of bipolar lesions and a high number of instability episodes with anterior glenohumeral instability.

BACKGROUND: Significant bone defects are associated with poor clinical results after surgical stabilization in cases of glenohumeral instability. Although multiple factors are thought to adversely affect enlargement of bipolar bone loss and increased shoulder instability, these factors have not been sufficiently evaluated. The purpose of this study was to identify the factors related to greater bone defects and a higher number of instability episodes in patients with glenohumeral instability. METHODS: A total of 120 consecutive patients with symptomatic unilateral instability of the glenohumeral joint were retrospectively reviewed. Three-dimensional surface-rendered/registered models of bilateral glenoids and proximal humeri from computed tomography data were matched by software, and the volumes of bone defects identified in the glenoid and humeral head were assessed. After relationships between objective variables and explanatory variables were evaluated using bivariate analyses, factors related to large bone defects in the glenoid and humeral head and a high number of total instability episodes and self-irreducible dislocations greater than the respective 75th percentiles were evaluated using logistic regression analyses with significant variables on bivariate analyses. RESULTS: Larger humeral head defects (P < .001) and a higher number of total instability episodes (P = .032) were found to be factors related to large glenoid defects. On the other hand, male sex (P = .014), larger glenoid defects (P = .015), and larger number of self-irreducible dislocations (P = .027) were related to large humeral head bone defects. An increased number of total instability episodes was related to longer symptom duration (P = .001) and larger glenoid defects (P = .002), and an increased number of self-irreducible dislocations was related to larger humeral head defects (P = .007). CONCLUSIONS: Whereas this study showed that bipolar lesions affect the amount of bone defects reciprocally, factors related to greater bone defects differed between the glenoid and the humeral head. Glenoid defects were related to the number of total instability episodes, whereas humeral head defects were related to the number of self-irreducible dislocations.