RESUMEN
5-bromopyridine-2,3-diamine reacted with benzaldehyde to afford the corresponding 6-Bromo-2-phenyl-3H-imidazo[4,5-b]pyridine (1). The reaction of the latter compound (1) with a series of halogenated derivatives under conditions of phase transfer catalysis solid-liquid (CTP) allows the isolation of the expected regioisomers compounds (2-8). The alkylation reaction of (1) gives, each time, two regioisomers, N3 and N4; in the case of ethyl bromoactate, the reaction gives, at the same time, the three N1, N3 and N4 regioisomers. The structures of synthesized compounds were elucidated on the basis of different spectral data (1H NMR, 13C NMR), X-Ray diffraction and theoretical study using the DFT method, and confirmed for each compound. Hirshfeld surface analysis was used to determine the intermolecular interactions responsible for the stabilization of the molecule. Density functional theory was used to optimize the compounds, and the HOMO-LUMO energy gap was calculated, which was used to examine the inter/intra molecular charge transfer. The molecular electrostatic potential map was calculated to investigate the reactive sites that were present in the molecule. In order to determine the potential mode of interactions with DHFR active sites, the three N1, N3 and N4 regioisomers were further subjected to molecular docking study. The results confirmed that these analogs adopted numerous important interactions, with the amino acid of the enzyme being targeted. Thus, the most docking efficient molecules, 2 and 4, were tested in vitro for their antibacterial activity against Gram-positive bacteria (Bacillus cereus) and Gram-negative bacteria (Escherichia coli). Gram-positive bacteria were more sensitive to the action of these compounds compared to the Gram-negative, which were much more resistant.
Asunto(s)
Antiinfecciosos , Simulación del Acoplamiento Molecular , Conformación Molecular , Antiinfecciosos/farmacología , Antiinfecciosos/química , Antibacterianos/farmacología , Antibacterianos/química , Bacterias Grampositivas , Piridinas/farmacología , Piridinas/químicaRESUMEN
The asymmetric unit of the title compound, C11H12N2O2·H2O, contains a mol-ecule of 1,4,6-trimethyl-1,4-di-hydro-quinoxaline-2,3-dione and a solvent water mol-ecule. Four atoms of the benzene ring are disordered over two sets of sites in a 0.706â (7):0.294â (7) ratio while the N-bound methyl groups are rotationally disordered with occupancy ratios of 0.78â (4):0.22â (4) and 0.76â (5):0.24â (5). In the crystal, mol-ecules are linked by O-Hâ¯O and C-Hâ¯O hydrogen bonds into layers lying parallel to (10). The Hirshfeld surface analysis indicates that the most important contributions to the packing arrangement are due to Hâ¯H (51.3%) and Oâ¯H/Hâ¯O (28.6%) inter-actions. The mol-ecular structure calculated by density functional theory is compared with the experimentally determined mol-ecular structure, and the HOMO-LUMO energy gap has been calculated.
RESUMEN
The title quinoxaline mol-ecule, C23H20N2O2, is not planar, the dihedral angle angle between the mean planes of the benzene rings being 72.54â (15)°. In the crystal, mol-ecules are connected into chains extending parallel to (10) by weak C-Hâ¯O hydrogen bonds. Weak C-Hâ¯π inter-actions link the chains, forming a three-dimensional network structure. Hirshfeld surface analysis revealed that the most important contributions for the crystal packing are from Hâ¯H (48.7%), Hâ¯C/Câ¯H (32.0%), Hâ¯O/Oâ¯H (15.4%), Câ¯C (1.9%), Hâ¯N/Nâ¯H (1.1%) contacts.
RESUMEN
The title compound, C18H12FNOS, is built up from a 4-fluoro-benzyl-idene moiety and a di-hydro-benzo-thia-zine unit with a propynyl substituent, with the heterocyclic portion of the di-hydro-benzo-thia-zine unit adopting a shallow boat conformation with the propynyl substituent nearly perpendicular to it. The two benzene rings are oriented at a dihedral angle of 43.02â (6)°. In the crystal, C-HFlurphenâ¯FFlurphen (Flurphen = fluoro-phen-yl) hydrogen bonds link the mol-ecules into inversion dimers, enclosing R 2 2(8) ring motifs, with the dimers forming oblique stacks along the a-axis direction. Hirshfeld surface analysis of the crystal structure indicates that the most important contributions to the crystal packing are from Hâ¯H (33.9%), Hâ¯C/Câ¯H (26.7%), Hâ¯F/Fâ¯H (10.9%) and Câ¯C (10.6%) inter-actions. Hydrogen bonding and van der Waals inter-actions are the dominant inter-actions in the crystal packing. Density functional theory (DFT) optimized structures at the B3LYP/6-311â G(d,p) level are compared with the experimentally determined mol-ecular structure in the solid state. The HOMO-LUMO behaviour was elucidated to determine the energy gap.
RESUMEN
BACKGROUND: A novel series of 1,2,3-triazole derivatives containing 1,4-benzothiazin-3-one ring (7a-9a, 7b-9b), (10a-12a, 10b-12b) and (13-15) were synthesized by 1,3-dipolar cycloaddition reactions of azides α-D-galactopyranoside azide F, 2,3,4,6-tetra-O-acetyl-(D)-glucopyranosyl azide G and methyl-N-benzoyl-α-azidoglycinate H with compounds 4-6. FINDINGS: Initially, the reactions were conducted under thermal conditions in ethanol. The reaction leads, each time, to the formation of two regioisomers: (Schemes 2, 3) with yields of 17 to 21% for 1,5-disubstituted 1,2,3-triazole-regioisomers (7b-12b) and yields ranging from 61 to 65% for the 1,4-disubstituted regioisomers (7a-12a). In order to report an unequivocal synthesis of the 1,4-regioisomers and confirm the structures of the two regioisomers obtained in thermal conditions (Huisgen reactions), the method click chemistry (Copper-Catalyzed Azide-Alkyne Cycloaddition) has been used. CONCLUSIONS: The newly synthesized compounds using cycloaddition reactions were evaluated in vitro for their antibacterial activities against some Gram positive and Gram negative microbial strains. Among the compounds tested, the compound 8a showed excellent antibacterial activities against PA ATCC and Acin ESBL (MIC = 31.2 µg/ml).
RESUMEN
The development of low-cost catalytic systems that mimic the activity of tyrosinase enzymes (Catechol oxidase) is of great promise for future biochemistry technologic demands. Herein, we report the synthesis of new biomolecules systems based on hydrazone derivatives containing a pyrazole moiety (L1-L6) with superior catecholase activity. Crystal structures of L1 and L2 biomolecules were determined by X-ray single crystal diffraction (XRD). Optimized geometrical parameters were calculated by density functional theory (DFT) at B3LYP/6-31G (d, p) level and were found to be in good agreement with single crystal XRD data. Copper (II) complexes of the compounds (L1-L6), generated in-situ, were investigated for their catalytic activities towards the oxidation reaction of catechol to ortho-quinone with the atmospheric dioxygen, in an attempt to model the activity of the copper containing enzyme tyrosinase. The studies showed that the activities depend on four parameters: the nature of the ligand, the nature of counter anion, the nature of solvent and the concentration of ligand. The Cu(II)-ligands, given here, present the highest catalytic activity (72.920 µmol·L-1·min-1) among the catalysts recently reported in the existing literature.
Asunto(s)
Catecoles/química , Hidrazonas/química , Pirazoles/química , Catálisis , Cristalografía por Rayos X , Modelos Moleculares , Estructura Molecular , Oxidación-Reducción , Espectrofotometría Ultravioleta , Relación Estructura-ActividadRESUMEN
The benzimidazolone part of the title mol-ecule, C10H8N2O, is almost planar [r.m.s. deviation = 0.014â (1)â Å] and the NCH2C CH group forms a dihedral angle of 67.95â (6)° with its best plane. In the crystal, mol-ecules form inversion dimers via pairs of N-Hâ¯O hydrogen bonds. C-Hâ¯O inter-actions connect the dimers, forming a two-dimensional polymeric network parallel to (100).
RESUMEN
The benzimidazolone residue in the title mol-ecule, C10H9N3O3, is almost planar, with the largest deviation from the mean plane being 0.016â (2)â Å for the C atom linked to the nitro group. This plane is nearly perpendicular to the 1-allyl chain as indicated by the C-N-C-C torsion angle of 90.9â (3)°. The fused-ring system makes a dihedral angle of 5.6â (3)° with the nitro group, leading to a synperiplanar conformation. In the crystal, zigzag supra-molecular chains are formed along the a axis by N-Hâ¯O hydrogen bonds.
RESUMEN
In the two independent mol-ecules of the title compound, C(10)H(7)N(3)O(3), the nitro substitutent is twisted slightly with respect to the benzodiazol fused-ring system [dihedral angles = 4.9â (3) and 8.5â (1)°]. The two independent mol-ecules are disposed about a pseudo inversion center and are held together by N-Hâ¯O hydrogen bonds. The supramolecular dimer is essentially planar [dihedral angle between the fused rings = 2.0â (1)°]. Adjacent dimers are linked by acetyl-ene-nitro C-Hâ¯O inter-actions, generating a ribbon motif along (110).
RESUMEN
The two fused five- and six-membered rings building the mol-ecule of the title compound, C(13)H(10)BrN(3), are approximately planar, the largest deviation from the mean plane being 0.004â (2)â Å. The dihedral angle between the imidazo[4,5-b]pyridine mean plane and that of the phenyl ring is 41.84â (11)°. The structure is held together by slipped π-π stacking between symmetry-related mol-ecules, with an inter-planar distance of 3.583â (1)â Å and a centroid-centroid vector of 3.670â (2)â Å.
RESUMEN
The fused five- and six-membered rings in the title compound, C(14)H(12)N(2)O, are essentially planar, the largest deviation from the mean plane being 0.023â (2)â Å. The dihedral angle between the benzimidazole mean plane and the phenyl ring is 68.50â (6)°. In the crystal, each mol-ecule is linked to its symmetry equivalent created by a crystallographic inversion center by pairs of N-Hâ¯O hydrogen bonds, forming inversion dimers.
RESUMEN
There are two crystallographically independent mol-ecules in the asymmetric unit of the title compound, C(22)H(17)BrN(6). The dihedral angles between the imidazo[4,5-b]pyridine mean plane and the phenyl rings are 20.4â (2) and 24.0â (2)° in the two mol-ecules. The orientation of triazoles compared to the imidazo[4,5-b]pyridine system is almost the same in both mol-ecules, with dihedral angles of 64.2â (2) and 65.1â (2)°. However, the main difference between the two mol-ecules lies in the arrangement of the phenyl groups compared to imidazo[4,5-b]pyridine in each mol-ecule. Indeed, in the first mol-ecule the dihedral angle between the plane of the phenyl ring and that of the imidazo[4,5-b]pyridine system is 67.7â (2)°, while in the second mol-ecule the plane of the phenyl ring is almost perpendicular to that of the imidazo[4,5-b]pyridine system with a dihedral angle of 86.0â (2)°.
RESUMEN
In the title compound, C(13)H(10)N(2)O, the fused-ring system is essentially planar, the largest deviation from the mean plane being 0.015â (1)â Å. The two propynyl groups are nearly perpendicular to the benzimidazole plane, making dihedral angles of 85â (3) and 80â (2)â °, and point in opposite directions. There are two short inter-molecular C-Hâ¯O contacts to the carbonyl O atom, one involving the acetyl-enic H atom and the other a H atom of the methyl-ene group.
RESUMEN
In the title mol-ecule, C(17)H(15)BrN(4)O(2), the fused-ring system is essentially planar, the largest deviation from the mean plane being 0.015â (2)â Å, and forms dihedral angles of 37.8â (2) and 35.5â (2)° with the phenyl and oxazolidine rings, respectively. The conformation adopted by the mol-ecule is stabilized by an intra-molecular πâ¯π inter-action [centroid-centroid distance = 3.855(2)â Å] between oxazolidine and phenyl rings. The crystal packing features inter-molecular C-Hâ¯N and C-Hâ¯O inter-actions.
RESUMEN
The benzimidazolone part of the mol-ecule of the title compound, C(15)H(21)N(3)O(3), is almost planar (r.m.s. deviation = 0.007â Å) with its mean plane aligned at a dihedral angle of 10.4â (3)° with respect to the mean plane of the nitro substituent. In the crystal, two mol-ecules are disposed about a center of inversion, generating an N-Hâ¯O hydrogen-bonded cyclic dimer with R(2) (2)(8) graph-set motif.
RESUMEN
The benzimidazolone part of the title mol-ecule, C(17)H(25)N(3)O(3), is almost planar (r.m.s. deviation = 0.016â Å) and its mean plane is aligned at 7.9â (4) ° with respect to the mean plane of the nitro substituent. In the crystal, two mol-ecules are disposed about a center of inversion, generating a N-Hâ¯O hydrogen-bonded cyclic dimer with a R(2) (2)(8) graph-set motif.
RESUMEN
In the title mol-ecule, C(16)H(23)N(3)O(3), the dihedral angle between the benzimidazole and nitro group planes is 5.34â (9)° and the dihedral angle between the benzimidazole and aliphatic chain mean planes is 73.23â (5)°. The C-C-C-C torsion angles (about 176°) of the nonyl group indicate an all-anti-periplanar conformation. In the crystal, adjacent mol-ecules are linked by pairs of N-Hâ¯O hydrogen bonds into inversion dimers. These mol-ecules are further connected through C-Hâ¯O inter-actions, building tapes parallel to (22).
RESUMEN
The crystal structure of the title compound, C(16)H(24)N(2)O, is built up from two fused six- and five-membered rings linked to C(9)H(19) chains. The fused-ring system is essentially planar, the largest deviation from the mean plane being 0.009â (2)â Å. The chain is nearly perpendicular to this plane [dihedral angle = 80.27â (17)°]. In the crystal, inter-molecular N-Hâ¯O hydrogen bonds form dimers with an R(2) (2)(8) graph-set motif. These dimers are further connected through C-Hâ¯O hydrogen bonds, building sheets parallel to (100).
RESUMEN
The mol-ecular structure of the title compound, C(17)H(20)N(4)O(5), contains a central fused-ring system, comprised of six- and five-membered rings. This unit is linked by C(2) chains to two 2-oxo-1,3-oxazolidine five-membered rings. The central fused-ring system is essentially planar, with a maximum deviation of 0.008â (1)â Å from the mean plane. Both oxazolidine five-membered rings are also nearly planar, with maximum deviations of 0.090â (1) and 0.141â (1)â Å.
RESUMEN
The benzimidazolone part of the title mol-ecule, C(13)H(13)ClN(2)O, is almost planar (r.m.s. deviation = 0.006â Å) and its mean plane is aligned at dihedral angles of 62.5â (1) and 78.0â (1)° with respect to the mean planes of the allyl substituents.