Influence of the color of composite resin foundation and luting cement on the final color of lithium disilicate ceramic systems.

STATEMENT OF PROBLEM: Lithium disilicate restorations are commonly used, particularly in the anterior region. The color of the underlying composite resin foundation (CRF) and luting cement may negatively affect the color of lithium disilicate ceramic restorations. PURPOSE: The purpose of this in vitro study was to investigate the effect of CRF and resin cement materials on the color of lithium disilicate ceramics in 2 different translucencies. MATERIAL AND METHODS: Twenty disks (11×1.5 mm, shade A2) were fabricated from medium-opacity (mo) (n=10) and high-translucency (ht) (n=10) lithium disilicate (Lds) blocks (IPS e.max Press). Five CRF disks (11×3 mm) were fabricated in 5 different shades (A1, A2, A3, B2, C2) and 30 resin cement disks (11×0.2 mm) in the shades of translucent (Tr), universal (Un=A2), and white-opaque (Wo). Ceramic specimens were placed on each CRF, and the resin cement combination and color was measured with a spectrophotometer. CIELAB color coordinates were recorded, and the color coordinates of both ceramics on the shades of the A2 CRF and resin cement were saved as the control. Color differences (ΔE00) between the control and test groups were calculated. Data were analyzed with 3-way analysis ANOVA and compared with the Tukey HSD test (α=.05). RESULTS: The ΔE00 values were influenced by the shades of the CRF, resin cement materials, and also their interactions (P<.05). The ΔE00 values were not affected by the ceramic type. The ΔE00 values of the Wo cement groups (1.73 to 2.96) were significantly higher than those of the other cement shades (0.88 to 1.29) for each ceramic type and CRF shade (P<.05). CONCLUSIONS: Lithium disilicate ceramics in 2 different translucencies were similarly influenced by the color of the underlying cement and CRF. When translucent and universal cement shades were used, the core shade did not affect the final color of the ceramics. White opaque cement caused clinically unacceptable color changes in both ceramics on all shades of CRFs except the C2 CRF and when high translucency ceramic was used on the A2 CRF. These changes were clinically acceptable, but perceptible.

Influence of different staining beverages on color stability, surface roughness and microhardness of silorane and methacrylate-based composite resins.

AIM: To investigate the influence of different staining beverages on color stability, surface roughness and microhardness of silorane and methacrylate-based composite resins. MATERIALS AND METHODS: Three different composite resins (Filtek Silorane, Filtek P60, Filtek Supreme XT) were tested. Thirty cylindrical specimens (10 × 2 mm) per material were prepared and polished with a series of aluminum-oxide polishing disks. Each group was then randomly subdivided into three groups according to the test beverages: distilled water (control), cola and coffee. The samples were immersed into different beverages for 15 days. Color, surface roughness and microhardness values were measured by a spectrophotometer, prophylometer and Vickers hardness device respectively, at baseline and after 15 days. The data were subjected to statistical analysis. RESULTS: Immersion in coffee resulted in a significant discoloration for all the composites tested, although the color change was lower in Filtek Silorane than that of MBCs (p < 0.05). All the composites tested showed similar surface roughness changes after immersion in different beverages (p > 0.05). Besides coffee caused more roughness change than others. Immersion in coffee caused highest microhardness change in Filtek Supreme XT (p < 0.05). CONCLUSION: Cola and coffee altered, to some degree, the color, surface roughness and/or microhardness of the tested resin composites, depending on the characteristics of the materials.

The correction of maxillary defciency with internal distraction devices: a multidisciplinary approach.

AIM: The purpose of this case report is to present the orthodontic, surgical and restorative treatments in the case of an operated cleft lip and palate and severe maxillary defciency in a 14-year-old female patient. BACKGROUND: Only orthodontic treatment could be ineffcient for cleft lip and palate patients characterized with maxillary hypoplasia. Orthodontic and surgical treatment shows suffcient results, especially with severe skeletal defciency. CASE REPORT: A cleft lip and palate patient required complex multidisciplinary treatment to preserve health and restore esthetics. Dental leveling and alignment of the maxillary and mandibular teeth were provided before the surgery. Maxillary advancement and clockwise rotation of the maxillary-mandibular complex was applied by a Le Fort 1 osteotomy with two internal distraction devices. After the active treatment including orthodontic treatment and orthognathic surgery, upper full mouth ceramic restoration was applied. CONCLUSION: This report shows the efficiency of internal distraction devices in cleft lip palate patients and exemplifes the multidisciplinary care required for such diffcult cases. Clinical signifcance: Stable improved occlusion and skeletal relations were observed after a follow-up examination period of 12 months.

Alternative treatment procedure in the case of fractured abutment of adhesive bridge: a clinical report.

UNLABELLED: In this case report, an alternative approach was presented for treatment of coronal fracture including pulp of maxillary central incisor, one of the abutments of an adhesive bridge, by using fiber post and tooth's own fractured component. The patient was referred to our clinic with the complaint of pain from the upper right central incisor and mobility of the adhesive bridge in maxillary anterior segment. It was realized that, the upper right central incisor, one of the abutments of the adhesive bridge, had been fractured at middle thirds of the crown including the pulp chamber. After dismounting the adhesive bridge and completion of the root canal treatment, a fiber post was placed into the fractured tooth. The fractured component, adherent to adhesive bridge retainer, was concorded to the fiber post. The whole structure was cemented with adhesive resin. A 1-mm-wide groove was made along the fracture line and restored with composite resin. The patient was evaluated clinically and radiographically at 12 and 30 months after the treatment. CLINICAL SIGNIFICANCE: Adhesive cementation of fractured component by supporting the remaining tooth structure with a fiber post is an inexpensive and conservative treatment alternative when the fractured component is compatible with the remaining tooth structure in cases of tooth fractures including the pulp chamber at anterior segment.