Bioactive Peptide Profiling in Collagen Hydrolysates: Comparative Analysis Using Targeted and Untargeted Liquid Chromatography-Tandem Mass Spectrometry Quantification.

The investigation of collagen hydrolysates (CHs) is essential due to their widespread use in health, cosmetic, and therapeutic industries, attributing to the presence of bioactive dipeptides (DPs) and tripeptides (TPs). This study developed a novel targeted liquid chromatography-tandem mass spectrometry (LC-MS/MS) method with propyl chloroformate (PCF) derivatization to measure three bioactive peptides-Hydroxyprolyl-glycine (Hyp-Gly), Glycyl-prolyl-hydroxyproline (Gly-Pro-Hyp), and Prolyl-hydroxyproline (Pro-Hyp)-in CHs, with strong correlation coefficients (0.992, 1.000, and 0.995, respectively) and low limits of detection (LODs) of 1.40, 0.14, and 1.16 µM, respectively. Untargeted data-dependent acquisition (DDA) analyses measured peptide size distribution, while amino acid analysis assessed nutritional content. The analysis of ten commercial CHs revealed similar amino acid profiles but varied peptide lengths, indicating diverse hydrolysis conditions. Products with higher proportions of smaller peptides showed elevated levels of the targeted bioactive peptides, suggesting that a smaller peptide size may increase bioactivity. These findings can inform the optimization of CH supplements, providing consumers with detailed peptide content for more informed choices. Data are available via ProteomeXchange with the identifier PXD051699.

An LC-MS/MS-based platform for the quantification of multiple amyloid beta peptides in surrogate cerebrospinal fluid.

Introduction: The accurate quantification of amyloid beta (Aß) peptides in cerebrospinal fluid (CSF) is crucial for Alzheimer's disease (AD) research, particularly in terms of preclinical and biomarker studies. Traditional methods, such as the enzyme-linked immunosorbent assay (ELISA), have limitations. These include high costs, labor intensity, lengthy processes, and the possibility of cross-reactivity. Objectives: The primary objectives of this research were twofold: to comprehensively characterize Aß peptides and to develop a reliable and accurate method for the simultaneous quantification of Aß 1-40 and Aß 1-42 peptides in surrogate CSF that is traceable to the International System of Units (SI). Methods: We developed a novel method that combined solid phase extraction (SPE) with isotope dilution liquid chromatography/tandem mass spectrometry (ID-LC/MSMS). SPE was employed to efficiently eliminate matrix interferences, while [15N] Aß1-40 and [15N] Aß1-42 served as internal standards to improve accuracy. In addition, we introduced Peptide Impurity Corrected Amino Acid Analysis (PICAA) to ensure traceability to the SI and reliable quantification of Aß peptides. Results: The developed platform demonstrated a linear calibration range of 300-20000 pg/ml for both Aß1-42 and Aß1-40 peptides, accompanied by strong correlation coefficients greater than 0.995. Quality Control (QC) samples demonstrated an accuracy of at least 90.0 %. Conclusion: The enhanced specificity and flexibility of the developed platform potentially have implications for Alzheimer's disease diagnosis and future investigations of novel Aß peptide biomarkers.

Development of an ID-LC-MS/MS method using targeted proteomics for quantifying cardiac troponin I in human serum.

BACKGROUND: Cardiac troponin is a complex protein consisting of the three subunits I, T and C located in heart muscle cells. When the heart muscle is damaged, it is released into the blood and can be detected. Cardiac troponin I (cTnI) is considered the most reliable and widely accepted test for detecting and confirming acute myocardial infarction. However, there is no current standardization between the commercial assays for cTnI quantification. Our work aims to create a measurement procedure that is traceable to the International System of Units for accurately measuring cardiac cTnI levels in serum samples from patients. METHODS: The workflow begins with immobilizing anti-cTnI antibodies onto magnetic nanoparticles to form complexes. These complexes are used to isolate cTnI from serum. Next, trypsin is used to enzymatically digest the isolated cTnI. Finally, the measurement of multiple cTnI peptides is done simultaneously using isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS). RESULTS: The maximum antibody immobilization was achieved by combining 1 mg of nanoparticles with 100 µg of antibody, resulting in an average of 59.2 ± 5.7 µg/mg of immobilized antibody. Subsequently, the anti-cTnI-magnetic nanoparticle complex was utilized to develop and validate a method for quantifying cTnI in human serum using ID-LC-MS/MS and a protein calibration approach. The analytical method was assessed regarding linearity and recovery. The developed method enables the quantification of cTnI from 0.7 to 24 µg/L (R > 0.996). The limit of quantification was 1.8 µg/L and the limit of detection was 0.6 µg/L. Intermediate precision was ≤ 9.6% and repeatability was 2.0-8.7% for all quality control materials. The accuracy of the analyzed quality control materials was between 90 and 110%. Total measurement uncertainties for target value assignment (n = 6) were found to be ≤ 12.5% for all levels. CONCLUSIONS: The analytical method demonstrated high analytical performance in accurately quantifying cardiac troponin I levels in human serum. The proposed analytical method has the potential to facilitate the harmonization of cTnI results between clinical laboratories, assign target values to secondary certified reference materials and support reliable measurement of cTnI.

Proteomic fertility markers in ram sperm.

Precise estimation of ram fertility is important for sheep farming to sustain reproduction efficiency and profitability of production. There, however, is no conventional method to accurately predict ram fertility. The objective of this study, therefore, was to ascertain proteomic profiles of ram sperm having contrasting fertility phenotypes. Mature rams (n = 66) having greater pregnancy rates than average (89.4 ± 7.2%) were assigned into relatively-greater fertility (GF; n = 31; 94.5 ± 2.8%) whereas those with less-than-average pregnancy rates were assigned into a lesser-fertility (LF; n = 25; 83.1 ± 5.73%; P = 0.028) group. Sperm samples from the outlier greatest- and least-fertility rams (n = 6, pregnancy rate; 98.4 ± 1.8% and 76.1 ± 3.9%) were used for proteomics assessments utilizing Label-free LC-MS/MS. A total of 997 proteins were identified, and among these, 840 were shared by both groups, and 57 and 93 were unique to GF and LF, respectively. Furthermore, 190 differentially abundant proteins were identified; the abundance of 124 was larger in GF while 66 was larger in LF rams. The GF ram sperm had 79 GO/pathway terms in ten major biological networks while there were 47 GO/pathway terms in six biological networks in sperm of LF rams. Accordingly, differential abundances of sperm proteins between sperm of GF and LF rams were indicative of functional implications of sperm proteome on male fertility. The results of this study emphasize there are potential protein markers for evaluation of semen quality and estimation of ram sperm fertilizing capacity.

Thermal Proteome Profiling and Meltome Analysis of a Thermophilic Bacterial Strain, Geobacillus thermoleovorans ARTRW1: Toward Industrial Applications.

Thermophilic microorganisms that thrive in extreme environments are of great importance because they express heat-resistant enzymes with the potential to serve as biocatalysts in industrial applications. Thermal proteome profiling (TPP) is a multiplexed quantitative mass spectrometry method for analyses of structural information and melting behavior of thousands of proteins, simultaneously determining the thermal denaturation profiles of each protein. We report, in this study, TPP applied to a thermophilic bacterial proteome, a recently isolated strain of Geobacillus thermoleovorans named as ARTRW1. The proteome was investigated in terms of thermostable enzymes that are relevant to industrial applications. In this study, we present the thermostability profiles of its 868 proteins. The majority of G. thermoleovorans proteome was observed to melt between 62.5°C and 72°C, with melting point (Tm) mean value of 68.1°C ± 6.6°C. Unfolding characteristics of several enzymes, including amylase, protease, and lipase, were demonstrated which are highly informative in terms of their applicability to specific industrial processes. A significant correlation was observed between protein melting temperature and the structural features such as molecular weight and abundance, whereas correlations were modest or weak in relation to the α-helix structure percentages. Taken together, we demonstrated a system-wide melting profile analysis of a thermal proteome and listed proteins with elevated Tm values that are highly promising for applications in medicine, food engineering, and cosmetics in particular. The extracted Tm values were found similar to those obtained by biophysical methods applied to purified proteins. TPP analysis has significant industrial and biomedical potentials to accelerate thermophilic enzyme research and innovation.

Whole-Genome Sequence of Geobacillus thermoleovorans ARTRW1, Isolated from Armutlu Geothermal Spring, Turkey.

The thermophilic microorganism Geobacillus thermoleovorans ARTRW1 was isolated from water samples collected in the Armutlu hot spring in Turkey. Here, the whole-genome sequence and its annotations are reported.

Characterization of the apoLp-III/LPS complex: insight into the mode of binding interaction.

Apolipoproteins are able to associate with lipopolysaccharides (LPS), potentially providing protection against septic shock. To gain insight into the molecular details of this binding interaction, apolipophorin III (apoLp-III) from Galleria mellonella was used as a model. The binding of apoLp-III to LPS was optimal around 37-40 °C, close to the LPS phase transition temperature. ApoLp-III formed complexes with LPS from E. coli (serotype O55:B5) with a diameter of ~20 nm and a molecular weight of ~390 kDa, containing four molecules of apoLp-III and 24 molecules of LPS. The LPS-bound form of the protein was substantially more resistant to guanidine-induced denaturation compared to unbound protein. The denaturation profile displayed a multiphase character with a steep drop in secondary structure between 0 and 1 M guanidine-HCl and a slower decrease above 1 M guanidine-HCl. In contrast, apoLp-III bound to detoxified LPS was only slightly more resistant to guanidine-HCl induced denaturation compared to unbound protein. Analysis of size-exclusion FPLC elution profiles of mixtures of apoLp-III with LPS or detoxified LPS indicated a much weaker binding interaction with detoxified LPS compared to intact LPS. These results indicate that apoLp-III initially interacts with exposed carbohydrate regions, but that the lipid A region is required for a more stable LPS binding interaction.

Synthesis and validation of cyanine-based dyes for DIGE.

The application of difference gel electrophoresis (DIGE), in particular its most common "minimal labeling" variety, utilizes N-hydroxysuccinimide esters of Cy2, Cy3, and Cy5 dyes, which are commercially available. We describe methods for the efficient synthesis of all three dyes from relatively inexpensive and commercially available precursors in only a few steps and with relatively high yields. In model DIGE experiments, the newly synthesized dyes proved to be indistinguishable from commercially available ones and have been shown to be stable for years while stored under argon as dry solids or after being dissolved in N,N-dimethylformamide.