Integrated biorefinery approach for utilization of wood waste into levulinic acid and 2-Phenylethanol production under mild treatment conditions.

In a bid to explore the on-site biorefinery approach for conversion of forestry residues, lignocellulosic biomass into value-added products was studied. The bark white pine wood was subjected to the microwave technique of fast and slow hydrolysis under varying acid and biomass concentrations to produce levulinic acid (LA). The HCl (2% v/v) and plant biomass (1% w/v) were identified as the optimum conditions for fast wood hydrolysis (270 ºC for 12 sec), which led to maximum LA yield of 446.68 g/kgPB. The proposed sustainable approach is mild, quick, and utilized a very low concentration of the HCl for the production of LA. The hydrolysate was used as a medium for Kluyveromyces marxianus growth to produce 2-phenylethanol (2-PE). K. marxianus used 74-95% of furfural from hydrolysate as a co-substrate to grow. The proposed model of the integrated biorefinery is an affordable on-site approach of using forest waste into localized solutions to produce LA and 2-PE.

Integrated wood biorefinery: Improvements and tailor-made two-step strategies on hydrolysis techniques.

This study categorized different pretreatment methods into mild (below 120 °C), normal (120-200 °C) and extreme conditions (above 200 °C) for selective approach with efficient wood hydrolysis for direct market applications. The model two-step strategy of selective normal-hydrolysis: steam explosion (170 °C for 30 min) with concentrating normal-hydrolysis: organosolv at (160 °C for 20 min) on hard/softwood will delivery individual fractions of hemicellulose, lignin, and cellulose with recovery rate above 95%. The first step releases C5 sugars with a recovery rate of 80% followed by the second step for C6 sugars with 95% rate and direct use of reduced sugars into C5 and C6 value-added products. The categorized conditions will ease the selection of the pretreatment method for the wood type and model strategy will increase the hydrolysis rate with greater simplicity and validity. The integrated wood biorefinery with two-step treatment is an in-house and closed-loop with endless industrial applications.

Microwave-assisted one-pot conversion of agro-industrial wastes into levulinic acid: An alternate approach.

Brewery liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry waste (SIW) were evaluated as alternative feedstocks for levulinic acid (LA) production via microwave-assisted acid-catalyzed thermal hydrolysis. LA production of 204, 160, 66, 49 and 12 g/kg was observed for BLW, BSG, APS, APUS, and SIW, respectively, at 140 °C, 40 g/L substrate concentration (SC), 60 min and 2 N HCl (acid concentration). Based on the screening studies, BLW and BSG were selected for optimization studies using response surface methodology. Maximum LA production of 409 and 341 g/kg for BLW and BSG, respectively were obtained at 160 °C, 4.5 M HCl, 85 g/L SC and 27.5 min. Results demonstrated the possibility of using brewery wastes as promising substrates for economical and higher yield production of LA, a renewable platform chemical and versatile precursor for fuels and chemicals.

Valorization of crude glycerol and eggshell biowaste as media components for hydrogen production: A scale-up study using co-culture system.

The properties of eggshells (EGS) as neutralizing and immobilizing agent were investigated for hydrogen (H2) production using crude glycerol (CG) by co-culture system. Eggshells of different sizes and concentrations were used during batch and repeated-batch fermentation. For batch and repeated-batch fermentation, the maximum H2 production (36.53±0.53 and 41.16±0.95mmol/L, respectively) was obtained with the EGS size of 33µm

Enrichment of Secondary Wastewater Sludge for Production of Hydrogen from Crude Glycerol and Comparative Evaluation of Mono-, Co- and Mixed-Culture Systems.

Anaerobic digestion using mixed-culture with broader choice of pretreatments for hydrogen (H2) production was investigated. Pretreatment of wastewater sludge by five methods, such as heat, acid, base, microwave and chloroform was conducted using crude glycerol (CG) as substrate. Results for heat treatment (100 °C for 15 min) showed the highest H2 production across the pretreatment methods with 15.18 ± 0.26 mmol/L of medium at 30 °C in absence of complex media and nutrient solution. The heat-pretreated inoculum eliminated H2 consuming bacteria and produced twice as much as H2 as compared to other pretreatment methods. The fermentation conditions, such as CG concentration (1.23 to 24 g/L), percentage of inoculum size (InS) (1.23% to 24% v/v) along with initial pH (2.98 to 8.02) was tested using central composite design (CCD) with H2 production as response parameter. The maximum H2 production of 29.43 ± 0.71 mmol/L obtained at optimum conditions of 20 g/L CG, 20% InS and pH 7. Symbiotic correlation of pH over CG and InS had a significant (p-value: 0.0011) contribution to H2 production. The mixed-culture possessed better natural acclimatization activity for degrading CG, at substrate inhibition concentration and provided efficient inoculum conditions in comparison to mono- and co-culture systems. The heat pretreatment step used across mixed-culture system is simple, cheap and industrially applicable in comparison to mono-/co-culture systems for H2 production.

Biohydrogen production by co-fermentation of crude glycerol and apple pomace hydrolysate using co-culture of Enterobacter aerogenes and Clostridium butyricum.

Co-substrate utilization of various wastes with complementary characteristics can provide a complete medium for higher hydrogen production. This study evaluated potential of apple pomace hydrolysate (APH) co-fermented with crude glycerol (CG) for increased H2 production and decreased by-products formation. The central composite design (CCD) along with response surface methodology (RSM) was used as tool for optimization and 15 g/L of CG, 5 g/L of APH and 15% (v/v) inoculum were found to be optimum to produce as high as 26.07 ± 1.57 mmol H2/L of medium. The p-value of 0.0017 indicated that APH at lower concentration had a significant effect on H2 production. By using CG as sole carbon source, reductive pathway of glycerol metabolism was favored with 19.46 mmol H2/L. However, with APH, oxidative pathway was favored with higher H2 production (26.07 ± 1.57 mmol/L) and decrease in reduced by-products (1,3-propanediol and ethanol) formation. APH inclusion enhanced H2 production, and decreased substrate inhibition.