RESUMEN
Waste minimization strategy was applied in the current work for synthesis of the catalysts from industrial solid waste, namely desulfurization slag. The starting slag material comprising CaCO3, Ca(OH)2, SiO2, Al2O3, Fe2O3, and TiO2 was processed by various treating agents systematically varying the synthesis parameters. A novel efficient technique - ultrasound irradiation, was applied as an additional synthesis step for intensification of the slag dissolution and crystallization of the new phases. Physico-chemical properties of the starting materials and synthesized catalysts were evaluated by several analytical techniques. Treatment of the industrial slag possessing initially poor crystal morphology and a low surface area (6 m2/g) resulted in formation of highly-crystalline catalysts with well-developed structural properties. Surface area was increased up to 49 m2/g. High basicity of the neat slag as well as materials synthesized on its basis makes possible application of these materials in the reactions requiring basic active sites. Catalytic performance of the synthesized catalysts was elucidated in the synthesis of carbonate esters by carboxymethylation of cinnamyl alcohol with dimethyl carbonate carried out at 150 °C in a batch mode. Ultrasonication of the slag had a positive effect on the catalytic activity. Synthesized catalysts while exhibiting similar selectivity to the desired product (ca. 84%), demonstrated a trend of activity increase for materials prepared using ultrasonication pretreatment. The choice of the treating agent also played an important role in the catalytic performance. The highest selectivity to the desired cinnamyl methyl carbonate (88%) together with the highest activity (TOF35 = 3.89*10-7 (mol/g*s)) was achieved over the material synthesized using 0.6 M NaOH solution as the treating agent with the ultrasound pre-treatment at 80 W for 4 h.
RESUMEN
A nanograined YBCO target, where a great number of grain boundaries, pores etc. exist, is shown to hold an alternative approach to future pulsed laser deposition based high-temperature superconductor thin film and coated conductor technologies. Although the nanograined material is introduced earlier, in this work, we comprehensively demonstrate the modified ablation process, together with unconventional nucleation and growth mechanisms that produces dramatically enhanced flux pinning properties. The results can be generalized to other complex magnetic oxides, where an increased number of defects are needed for modifying their magnetic and electrical properties, thus improving their usability in the future technological challenges.
RESUMEN
We report the detection and quantification of nuclear spin incoherent scattering from hydrogen occupying interstitial sites in a thin film of vanadium. The neutron wave field is enhanced in a quantum resonator with magnetically switchable boundaries. Our results provide a pathway for the study of dynamics at surfaces and in ultrathin films using inelastic and/or quasielastic neutron scattering methods.
RESUMEN
The chemical diffusion coefficient of hydrogen in a 50 nm thin film of vanadium (0 0 1) is measured as a function of concentration and temperature, well above the known phase boundaries. Arrhenius analysis of the tracer diffusion constants reveal large changes in the activation energy with concentration: from 0.10 at 0.05 in H V-1 to 0.5 eV at 0.2 in H V-1. The results are consistent with a change from tetrahedral to octahedral site occupancy, in that concentration range. The change in site occupancy is argued to be caused by the uniaxial expansion of the film originating from the combined hydrogen induced expansion and the clamping of the film to the substrate.
RESUMEN
To actualize the high spintronic application potential of complex magnetic oxides, it is essential to fabricate these materials as thin films with the best possible magnetic and electrical properties. Sr2FeMoO6 is an outstanding candidate for such applications, but presently no thin film synthesis route, which would preserve the magnetic properties of bulk Sr2FeMoO6, is currently known. In order to address this problem, we present a comprehensive experimental and theoretical study where we link the magnetic and half metallic properties of Sr2FeMoO6 thin films to lattice strain, Fe-Mo antisite disorder and oxygen vacancies. We find the intrinsic effect of strain on the magnetic properties to be very small, but also that an increased strain will significantly stabilize the Sr2FeMoO6 lattice against the formation of antisite disorder and oxygen vacancies. These defects, on the other hand, are recognized to drastically influence the magnetism of Sr2FeMoO6 in a nonlinear manner. On the basis of the findings, we propose strain manipulation and reductive annealing as optimization pathways for improving the spintronic functionality of Sr2FeMoO6.
