The high luminescence efficiency of cyclometallated iridium(iii) complexes, including those widely used in OLEDs, is typically attributed solely to the formally spin-forbidden phosphorescence process being facilitated by spin-orbit coupling with the Ir(iii) centre. In this work, we provide unequivocal evidence that an additional mechanism can also participate, namely a thermally activated delayed fluorescence (TADF) pathway. TADF is well-established in other materials, including in purely organic compounds, but has never been observed in iridium complexes. Our findings may transform the design of iridium(iii) complexes by including an additional, faster fluorescent radiative decay pathway. We discover it here in a new dinuclear complex, 1, of the form [Ir(N^C)2]2(µ-L), where N^C represents a conventional N^C-cyclometallating ligand, and L is a bis-N^O-chelating bridging ligand derived from 4,6-bis(2-hydroxyphenyl)-pyrimidine. Complex 1 forms selectively as the rac diastereoisomer upon reaction of [Ir(N^C)2(µ-Cl)]2 with H2L under mild conditions, with none of the alternative meso isomer being separated. Its structure is confirmed by X-ray diffraction. Complex 1 displays deep-red luminescence in solution or in polystyrene film at room temperature (λem = 643 nm). Variable-temperature emission spectroscopy uncovers the TADF pathway, involving the thermally activated re-population of S1 from T1. At room temperature, TADF reduces the photoluminescence lifetime in film by a factor of around 2, to 1 µs. The TADF pathway is associated with a small S1-T1 energy gap ΔEST of approximately 50 meV. Calculations that take into account the splitting of the T1 sublevels through spin-orbit coupling perfectly reproduce the experimentally observed temperature-dependence of the lifetime over the range 20-300K. A solution-processed OLED comprising 1 doped into the emitting layer at 5 wt% displays red electroluminescence, λEL = 625 nm, with an EQE of 5.5% and maximum luminance of 6300 cd m-2.
We report on the mechanism of enhancing the luminance and external quantum efficiency (EQE) by developing nanostructured channels in hybrid (organic/inorganic) light-emitting transistors (HLETs) that combine a solution-processed oxide and a polymer heterostructure. The heterostructure comprised two parts: (i) the zinc tin oxide/zinc oxide (ZTO/ZnO), with and without ZnO nanowires (NWs) grown on the top of the ZTO/ZnO stack, as the charge transport layer and (ii) a polymer Super Yellow (SY, also known as PDY-132) layer as the light-emitting layer. Device characterization shows that using NWs significantly improves luminance and EQE (≈1.1%â¯@â¯5000 cd m-2) compared to previously reported similar HLET devices that show EQE < 1%. The size and shape of the NWs were controlled through solution concentration and growth time, which also render NWs to have higher crystallinity. Notably, the size of the NWs was found to provide higher escape efficiency for emitted photons while offering lower contact resistance for charge injection, which resulted in the improved optical performance of HLETs. These results represent a significant step forward in enabling efficient and all-solution-processed HLET technology for lighting and display applications.
In this work, we introduce a spiro-fluorene unit into a phenylpyridine (CN)-type ligand as a simple way to deplanarize the structure and increase the solubility of the final platinum(II)···complex. Using a spiro-fluorene unit, orthogonal to the main coordination plane of the complex, reduces intermolecular interactions, leading to increased solubility but without significantly affecting the ability of the complex to form Pt···Pt dimers and excimers. This approach is highly important in the design of platinum(II) complexes, which often suffer from low solubility due to their mainly planar structure, and offers an alternative to the use of bulky alkyl groups. The nonplanar structure is also beneficial for vacuum-deposition techniques as it lowers the sublimation temperature. Importantly, there are no sp3 hybridized carbon atoms in the cyclometalating ligand that contain hydrogens, the undesired feature that is associated with the low stability of the materials in OLEDs. The complex displays high solubility in toluene, â¼10 mg mL-1, at room temperature, which allows producing solution-processed OLEDs in a wide range of doping concentrations, 5-100%, and EQE up to 5.9%, with a maximum luminance of 7400 cd m-2. Concurrently, we have also produced vacuum-deposited OLEDs, which display luminance up to 32â¯500 cd m-2 and a maximum EQE of 11.8%.
Invited for the cover of this issue are Krzysztof Durka and co-workers at Warsaw University of Technology, University of Warsaw, Silesian University of Technology and Heinrich-Heine-Universität. The image depicts the generation of singlet oxygen by the BODIPY photosensitizer. Read the full text of the article at 10.1002/chem.202300680.
Fullerenes have been long investigated for application as singlet oxygen sources. Even though they possess high photosensitizing efficiency, their practical use is still limited, mostly because of insufficient absorption of visible and/or near-infrared light. This limitation can be overcome by introducing organic chromophores that absorb longer-wavelength light, either by covalent attachment to C60 or by its encapsulation in a polymeric matrix. In this work, we investigated the photosensitizing properties of the C60 molecule functionalized with organic units comprising thiophene or selenophene rings. The chemical structures of the synthesized dyads were characterized by nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry. The influence of the S/Se atoms and vinyl linkage between the organic unit and C60 on the absorptive and emissive properties of the dyads was investigated and correlated with their photosensitizing activity. For the latter, we used a standard chemical singlet oxygen trap. A selected dyad C60ThSe2 was also applied as a source of singlet oxygen in a model photocatalyzed synthesis of the fine chemical juglone from 1,5-dihydroxynapthalene.
A synthetic approach to two regioisomeric π-electron extended [1,4]thiaborins annulated with two benzothiophene units has been developed. The central thiaborin rings of the boracycles obtained exhibit different electronic properties; this is reflected in their different aromatic characters, boron Lewis acidity and UV-vis spectroscopic behavior. Thiaborins were converted to boron dipyrromethene (BODIPY) complexes. Their emission spectra exhibit two distinct bands resulting from 1 LE and 1 CT transitions. Strong near-infrared phosphorescence in Zeonex thin films at 77â K indicates efficient intersystem crossing and the formation of triplet states. Separation of HOMO and LUMO orbitals between boracyclic and BODIPY moieties facilitates electron transfer to a 1 CT state followed by a transition to the 3 LE triplet state located on the ligand. These unique properties of spiro thiaborin-BODIPY complexes were explored for their application as singlet-oxygen photosensitizers. They show excellent photocatalytic performance with singlet oxygen quantum yields reaching 77 % and full conversion of the model organic substrate achieved after 1.5â h with only 0.05 % mol catalyst load.
Alkylation of one of the phenolic hydroxyl groups in a salen-type tetradentate ligand changes the coordination mode from O^N^N^O to the cyclometallating C^N^N^O type. The ligand was used to synthesize a new cyclometalated luminescent Pt(II) complex 2. While in solution the complex is poorly luminescent, in the solid state the emission is reinstated, which allowed one to evaluate complex 2 as a phosphorescent emitter in organic light-emitting diodes. 2 displays external quantum efficiency (EQE) = 9.1% and a maximum luminance of 9000 cd m-2 in a vacuum-deposited device. We carried out comparative analysis of photo- and electroluminescence of complex 2 with O^N^N^O complex 1 and demonstrated that the similar luminescent properties of the O^N^N^O and C^N^N^O complexes are rather coincidental because they display different excited-state landscapes. Surprisingly, the two complexes display a dramatically different electrochemical behavior, with O^N^N^O coordination leading to the formation of a stable electropolymer but C^N^N^O coordination fully preventing electropolymerization.
Six new four-coordinate tetrahedral boron complexes, containing 9-borafluoren-9-yl and diphenylboron cores attached to orthogonal fluorine- and chlorine-substituted 8-quinolinolato ligand chromophores, have been synthesised, characterised, and applied as emitters in organic light-emitting diodes (OLEDs). An extensive steady-state and time-resolved photophysical study, in solution and in the solid state, resulted in the first-time report of delayed fluorescence (DF) in solid films of 8-quinolinolato boron complexes. The DF intensity dependence on excitation dose suggests that this emission originates from triplet-triplet annihilation (TTA). Density functional theory (DFT) and time-dependent density functional theory (TDDFT) studies give insight into the ground and excited state geometries, electronic structures, absorption energies, and singlet-triplet gaps in these new organoboron luminophores. Finally, given their highly luminescent behaviour, organic light-emitting diode (OLED) devices were produced using the synthesised organoboron compounds as emissive fluorescent dopants. The best OLED displays green-blue (λmaxEL = 489 nm) electroluminescence with an external quantum efficiency (EQE) of 3.3% and a maximum luminance of 6300 cd m-2.
10H-Dibenzo[b,e][1,4]thiaborinine 5,5-dioxide (SO2B)-a high triplet (T1 =3.05â eV) strongly electron-accepting boracycle was successfully utilised in thermally activated delayed fluorescence (TADF) emitters PXZ-Dipp-SO2B and CZ-Dipp-SO2B. We demonstrate the near-complete separation of highest occupied and lowest unoccupied molecular orbitals leading to a low oscillator strength of the S1 âS0 CT transition, resulting in very long ca. 83â ns and 400â ns prompt fluorescence lifetimes for CZ-Dipp-SO2B and PXZ-Dipp-SO2B, respectively, but retaining near unity photoluminescence quantum yield. OLEDs using CZ-Dipp-SO2B as the luminescent dopant display high external quantum efficiency (EQE) of 23.3 % and maximum luminance of 18600â cd m-2 with low efficiency roll off at high brightness. For CZ-Dipp-SO2B, reverse intersystem crossing (rISC) is mediated through the vibronic coupling of two charge transfer (CT) states, without involving the triplet local excited state (3 LE), resulting in remarkable rISC rate invariance to environmental polarity and polarisability whilst giving high organic light-emitting diode (OLED) efficiency. This new form of rISC allows stable OLED performance to be achieved in different host environments.
Rapid and accurate detection of lethal volatile compounds is an emerging requirement to ensure the security of the current and future society. Since the threats are becoming more complex, the assurance of future sensing devices' performance can be obtained solely based on a thorough fundamental approach, by utilizing physics and chemistry together. In this work, we have applied thermal desorption spectroscopy (TDS) to study dimethyl methylophosphate (DMMP, sarin analogue) adsorption on zinc phthalocyanine (ZnPc), aiming to achieve the quantification of the sensing mechanism. Furthermore, we utilize a novel approach to TDS that involves quantum chemistry calculations for the determination of desorption activation energies. As a result, we have provided a comprehensive description of DMMP desorption processes from ZnPc, which is the basis for successful future applications of sarin ZnPc-based sensors. Finally, we have verified the sensing capability of the studied material at room temperature using impedance spectroscopy and took the final steps towards demonstrating ZnPc as a promising sarin sensor candidate.
Chemical Warfare Agents , Organometallic Compounds , Chemical Warfare Agents/analysis , Sarin , Organometallic Compounds/chemistry , Zinc Compounds
We present a study of aggregate excited states formed by complexes of the type Pt(N^C^N)X, where N^C^N represents a tridentate cyclometallating ligand, and X = SCN or I. These materials display near-infrared (NIR) photoluminescence in film and electroluminescence in NIR OLEDs with λ max EL = 720-944 nm. We demonstrate that the use of X = SCN or I modulates aggregate formation compared to the parent complexes where X = Cl. While the identity of the monodentate ligand affects the energy of Pt-Pt excimers in solution in only a subtle way, it strongly influences aggregation in film. Detailed calculations on aggregates of different sizes support the experimental conclusions from steady-state and time-resolved luminescence studies at variable temperatures. The use of X = I appears to limit aggregation to the formation of dimers, while X = SCN promotes the formation of larger aggregates, such as tetramers and pentamers, leading in turn to NIR photo- and electroluminescence > 850 nm. A possible explanation for the contrasting influence of the monodentate ligands is the lesser steric hindrance associated with the SCN group compared to the bulkier I ligand. By exploiting the propensity of the SCN complexes to form extended aggregates, we have prepared an NIR-emitting OLED that shows very long wavelength electroluminescence, with λ max EL = 944 nm and a maximum EQE = 0.3 ± 0.1%. Such data appear to be unprecedented for a device relying on a Pt(ii) complex aggregate as the emitter.
Delayed fluorescence (DF) by triplet-triplet annihilation (TTA) is observed in solutions of a benzoperylene-imidoester mesogen that shows a hexagonal columnar mesophase at room temperature in the neat state. A similar benzoperylene-imide with a slightly smaller HOMO-LUMO gap, that also is hexagonal columnar liquid crystalline at room temperature, does not show DF in solution, and mixtures of the two mesogens show no DF in solution either, because of collisional quenching of the excited triplet states on the imidoester by the imide. In contrast, DF by TTA from the imide but not from the imidoester is observed in condensed films of such mixtures, even though neat films of either single material are not displaying DF. In contrast to the DF from the monomeric imidoester in solution, DF of the imide occurs from dimeric aggregates in the blend films, assisted by the imidoester. Thus, the close contact of intimately stacked molecules of the two different species in the columnar mesophase leads to a unique mesophase-assisted aggregate DF. This constitutes the first observation of DF by TTA from the columnar liquid crystalline state. If the imide is dispersed in films of polybromostyrene, which provides an external heavy-atom effect facilitating triplet formation, DF is also observed. Organic light-emitting diodes (OLEDs) devices incorporating these liquid crystal molecules demonstrated high external quantum efficiency (EQE). On the basis of the literature and to the best of our knowledge, the EQE reported is the highest among nondoped solution-processed OLED devices using a columnar liquid crystal molecule as the emitting layer.
The photophysical and electrochemical properties of a new class of fluorinated benzonitrile compounds substituted with mixed phenoxazine and carbazole units have been investigated. When absorbing in a large range of the UV-vis spectrum due to both localized and charge-transfer absorptions, these compounds show dual broad emission in solution and intense emission in PMMA films, with photoluminescence quantum yields changing from a few percent in solution to 18% in a more rigid environment. The compounds also exhibit thermally activated delayed fluorescence demonstrated by the role of oxygen in the quenching of delayed fluorescence and by time-resolved luminescence studies, with an efficiency directly related to the number of phenoxazine substituents. Electrochemistry reveals dramatic changes in the reduction mechanisms according to the number of remaining fluorine atoms on the benzonitrile core. All these results demonstrate how it is possible to tune the photophysical and electrochemical properties of easily synthesizable derivatives by controlling the nature and relative number of the substituents on a simple aromatic platform.
A novel dinuclear platinum(ii) complex featuring a ditopic, bis-tetradentate ligand has been prepared. The ligand offers each metal ion a planar O^N^C^N coordination environment, with the two metal ions bound to the nitrogen atoms of a bridging pyrimidine unit. The complex is brightly luminescent in the red region of the spectrum with a photoluminescence quantum yield of 83% in deoxygenated methylcyclohexane solution at ambient temperature, and shows a remarkably short excited state lifetime of 2.1 µs. These properties are the result of an unusually high radiative rate constant of around 4 × 105 s-1, a value which is comparable to that of the very best performing Ir(iii) complexes. This unusual behaviour is the result of efficient thermally activated reverse intersystem crossing, promoted by a small singlet-triplet energy difference of only 69 ± 3 meV. The complex was incorporated into solution-processed OLEDs achieving EQEmax = 7.4%. We believe this to be the first fully evidenced report of a Pt(ii) complex showing thermally activated delayed fluorescence (TADF) at room temperature, and indeed of a Pt(ii)-based delayed fluorescence emitter to be incorporated into an OLED.
The rapid and reliable detection of lethal agents such as sarin is of increasing importance. Here, density-functional theory (DFT) is used to compare the interaction of sarin with single-metal-centered phthalocyanine (MPc) and MPc layer structures to a benign model system, i.e., the adsorption of dimethyl methylphosphonate (DMMP). The calculations show that sarin and DMMP behave nearly identical to the various MPcs studied. Among NiPc, CuPc, CoPc, and zinc phthalocyanine (ZnPc), we find the interaction of both sarin and DMMP to be the strongest with ZnPc, both in terms of interaction energy and adsorption-induced work function changes. ZnPc is thus proposed as a promising sensor for sarin detection. Using X-ray photoelectron spectroscopy, the theoretically predicted charge transfer from DMMP to ZnPc is confirmed and identified as a key component in the sensing mechanism.
A group of new boron complexes [BPh2{κ2N,N'-NC4H3-2-C(H)[double bond, length as m-dash]N-C6H4X}] (X = 4-Cl 4c, 4-Br 4d, 4-I 4e, 3-Br 4f, 2-Br 4g, 2-I 4h) containing different halogens as substituents in the N-aryl ring have been synthesized and characterized in terms of their molecular properties. Their photophysical characteristics have been thoroughly studied in order to understand whether these complexes exhibit an internal heavy-atom effect. Phosphorescence emission was found for some of the synthesized halogen-substituted boron molecules, particularly for 4g and 4h. DFT and TDDFT calculations showed that the lower energy absorption band resulted from the HOMO to LUMO (π-π*) transition, except for 2-I 4h, where the HOMO-1 to LUMO transition was also involved. The strong participation of iodine orbitals in HOMO-1 is reflected in the calculated absorption spectra of the iodine derivatives, especially 2-I 4h, when spin-orbit coupling (SOC) was included. Organic light-emitting diodes (OLEDs) based on these complexes, in the neat form or dispersed in a matrix, were also fabricated and tested. The devices based on films prepared by thermal vacuum deposition showed the best performance. When neat complexes were used, a maximum luminance (Lmax) of 1812 cd m-2 was obtained, with a maximum external quantum efficiency (EQEmax) of 0.15%. An EQEmax of ca. 1% along with a maximum luminance of 494 cd m-2 were obtained for a device fabricated by co-deposition of the boron complex and a host compound (1,3-bis(N-carbazolyl)benzene, mCP).
A facile efficient synthetic tool, Buchwald-Hartwig cross-coupling reaction, for the functionalization of 1,2,4,5-tetrazines is presented. Important factors affecting the Buchwald-Hartwig cross-coupling reaction have been optimized. Seven new donor-acceptor tetrazine molecules (TA1-TA7) were conveniently prepared in good to high yields (61-72%). They have been subsequently engaged in the inverse electron demand Diels-Alder (iEDDA) reaction with cyclooctyne. The photophysical and electrochemical properties of the new pyridazines have been studied. Some are fluorescent acting as turn-on probes. More importantly, two pyridazines (DA3 and DA6) exhibit room-temperature phosphorescence (RTP) properties.
The investigation of nondoped exciplex blends of 2,4,6-tris[3-(diphenylphosphinyl)phenyl]-1,3,5-triazine (PO-T2T), working as the one-electron acceptor molecule, with different electron donors is reported. The emissions of these exciplexes span from the blue to orange-red regions, showing clear contribution from thermally activated delayed fluorescence (TADF) and delayed fluorescence originated from nongeminate recombination of charge carriers created by the dissociation of optically generated exciplexes. We focus our studies on the properties of TADF in these systems, covering in particular the physical meaning of the different transient components observed in their luminescence decays. Our results unravel the intricate role of reverse intersystem crossing due to spin-orbit coupling and possibly also due to hyperfine interactions and internal conversion, which affect the efficiency of the TADF mechanism. Remarkable performances are obtained in prototype organic light-emitting diodes fabricated with some of these blends. Green exciplex blends, in particular, exhibited the current efficiency of 60 cd A-1, power efficiency of 71 lm W-1, and external quantum efficiency of 20%. We believe that our results will contribute significantly to highlight the potential advantages of intermolecular exciplexes in the area of organic light-emitting diodes.
Electron Transport , Oxidants/chemistry , Triazines/chemistry , Electrons , Fluorescence , Hot Temperature , Luminescence , Oxidants/chemical synthesis , Triazines/chemical synthesis
The light-emitting efficiency of luminescent materials is invariably compromised on moving to the red and near-infrared regions of the spectrum due to the transfer of electronic excited-state energy into vibrations. We describe how this undesirable "energy gap law" can be sidestepped for phosphorescent organometallic emitters through the design of a molecular emitter that incorporates two platinum(II) centers. The dinuclear cyclometallated complex of a substituted 4,6-bis(2-thienyl)pyrimidine emits very brightly in the red region of the spectrum (λmax = 610 nm, Φ = 0.85 in deoxygenated CH2Cl2 at 300 K). The lowest-energy absorption band is extraordinarily intense for a cyclometallated metal complex: at λ = 500 nm, ε = 53 800 M-1 cm-1. The very high efficiency of emission achieved can be traced to an unusually high rate constant for the T1 â S0 phosphorescence process, allowing it to compete effectively with nonradiative vibrational decay. The high radiative rate constant correlates with an unusually large zero-field splitting of the triplet state, which is estimated to be 40 cm-1 by means of variable-temperature time-resolved spectroscopy over the range 1.7 < T < 120 K. The compound has been successfully tested as a red phosphor in an organic light-emitting diode prepared by solution processing. The results highlight a potentially attractive way to develop highly efficient red and NIR-emitting devices through the use of multinuclear complexes.
A novel and unexpected convenient one-pot synthesis of 1,2,3,4-thiatriazoles has been discovered while investigating the classical tetrazine "Pinner synthesis". The synthetic route starts from commercially-available nitrile derivatives and gives good to high yields (51-80 %) with no need to isolate any thioacylating agents. The crucial impact of the solvent on the outcome of the modified "Pinner synthesis" is moreover examined and discussed. Using this new synthetic route, a novel donor-acceptor thiatriazole derivative has been prepared, which exhibits prominent thermally-activated delayed fluorescence (TADF) in both solution and film. The photoluminescence quantum yield (PLQY) in methylcyclohexane (MCH) and Zeonex (a cyclo olefin polymer) in oxygen-free conditions were determined to be 76 and 99 %, respectively. This work provides an efficient and practical synthetic approach to functionalized 1,2,3,4-thiatriazole derivatives, and will noticeably facilitate the application of 1,2,3,4-thiatriazole as an electron acceptor in organic electronics.
