Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
J Biomech ; 168: 112107, 2024 May.
Artículo en Inglés | MEDLINE | ID: mdl-38677029

RESUMEN

As part of the digestive system, the stomach plays a crucial role in the health and well-being of an organism. It produces acids and performs contractions that initiate the digestive process and begin the break-up of ingested food. Therefore, its mechanical properties are of interest. This study includes a detailed investigation of strains in the porcine stomach wall during passive organ filling. In addition, the observed strains were applied to tissue samples subjected to biaxial tensile tests. The results show inhomogeneous strains during filling, which tend to be higher in the circumferential direction (antrum: 13.2%, corpus: 22.0%, fundus: 67.8%), compared to the longitudinal direction (antrum: 4.8%, corpus: 24.7%, fundus: 50.0%) at a maximum filling of 3500 ml. Consequently, the fundus region experienced the greatest strain. In the biaxial tensile experiments, the corpus region appeared to be the stiffest, reaching nominal stress values above 400 kPa in the circumferential direction, whereas the other regions only reached stress levels of below 50 kPa in both directions for the investigated stretch range. Our findings gain new insight into stomach mechanics and provide valuable data for the development and validation of computational stomach models.


Asunto(s)
Estómago , Estrés Mecánico , Animales , Estómago/fisiología , Porcinos , Resistencia a la Tracción/fisiología , Fenómenos Biomecánicos , Modelos Biológicos
2.
J Mech Behav Biomed Mater ; 152: 106452, 2024 Apr.
Artículo en Inglés | MEDLINE | ID: mdl-38394765

RESUMEN

The function of a muscle is highly dependent on its architecture, which is characterized by the length, pennation, and curvature of the fascicles, and the geometry of the aponeuroses. During in vivo function, muscles regularly undergo changes in length, thereby altering their architecture. During passive muscle lengthening, fascicle length (FL) generally increases and the angle of fascicle pennation (FP) and the fascicle curvature (FC) decrease, while the aponeuroses increase in length but decrease in width. Muscles are differently structured, making their change during muscle lengthening complex and multifaceted. To obtain comprehensive data on architectural changes in muscles during passive length, the present study determined the three-dimensional fascicle geometry of rabbit M. gastrocnemius medialis (GM), M. gastrocnemius lateralis (GL), and M. plantaris (PLA). For this purpose, the left and right legs of three rabbits were histologically fixed at targeted ankle joint angles of 95° (short muscle length [SML]) and 60° (long muscle length [LML]), respectively, and the fascicles were tracked by manual three-dimensional digitization. In a second set of experiments, the GM aponeurosis dimensions of ten legs from five rabbits were determined at varying muscle lengths via optical marker tracking. The GM consisted of a uni-pennated compartment, whereas the GL and PLA contained multiple compartments of differently pennated fascicles. In the LML compared to the SML, the GM, GL, and PLA had on average a 41%, 29%, and 41% increased fascicle length, and a 30%, 25%, and 33% decrease in fascicle pennation and a 32%, 11%, and 35% decrease in fascicle curvature, respectively. Architectural properties were also differentiated among the different compartments of the PLA and GL, allowing for a more detailed description of their fascicle structure and changes. It was shown that the compartments change differently with muscle length. It was also shown that for each degree of ankle joint angle reduction, the proximal GM aponeurosis length increased by 0.11%, the aponeurosis width decreased by 0.22%, and the area was decreased by 0.20%. The data provided improve our understanding of muscles and can be used to develop and validate muscle models.


Asunto(s)
Aponeurosis , Procedimientos Ortopédicos , Animales , Conejos , Músculos , Articulación del Tobillo , Poliésteres
3.
J Mech Behav Biomed Mater ; 142: 105801, 2023 06.
Artículo en Inglés | MEDLINE | ID: mdl-37068433

RESUMEN

The stomach is a vital organ responsible for food storage, digestion, and transport. Stomach diseases are of great economic and medical importance and require a large number of bariatric surgeries every year. To improve medical interventions, in silico modeling of the gastrointestinal tract has gained popularity in recent years to study stomach functioning. Because of the great structural and nutritional similarity between the porcine and human stomach, the porcine stomach is a suitable surrogate for the development and validation of gastric models. This study presents a realistic 3D geometry model of the porcine stomach based on a photogrammetric reconstruction of a real organ. Layer thicknesses of the stomach wall's mucosa and tunica muscularis were determined by more than 1900 manual measurements at different locations. Layer thickness distributions show mean mucosal and muscle thicknesses of 2.29 ± 0.45 mm and 2.83 ± 0.99 mm, respectively. In general, layer thicknesses increase from fundus (mucosa: 1.82 ± 0.19 mm, muscle layer: 2.59 ± 0.32 mm) to antrum (mucosa: 2.69 ± 0.31 mm, muscle layer: 3.73 ± 1.05 mm). The analysis of stomach asymmetry with respect to an idealized symmetrical stomach model, an approach often used in the literature, revealed volumetric deviations of 45%, 15%, and 92% for the antrum, corpus, and fundus, respectively. The present work also suggests an algorithm for the computation of longitudinal and circumferential directions at local points. These directions are useful for the implementation of material anisotropy. In addition, we present data on the passive pressure-volume relationship of the organ and perform an exemplary finite-element simulation, where we demonstrate the applicability of the model. We encourage others to utilize the geometry model featuring profound asymmetry for future model-based investigations on stomach functioning.


Asunto(s)
Mucosa Gástrica , Estómago , Humanos , Animales , Porcinos , Estómago/fisiología , Músculos , Simulación por Computador , Algoritmos
4.
Biomech Model Mechanobiol ; 20(5): 2031-2044, 2021 Oct.
Artículo en Inglés | MEDLINE | ID: mdl-34302567

RESUMEN

Muscle architecture, which includes parameters like fascicle length, pennation angle, and physiological cross-sectional area, strongly influences skeletal muscles' mechanical properties. During maturation, the muscle architecture has to adapt to a growing organism. This study aimed to develop an architectural model capable of predicting the complete 3D fascicle architecture for primarily unipennate muscles of an arbitrary age, based on fascicle data for an initial age. For model development, we collected novel data on 3D muscle architecture of the rabbit (Oryctolagus cuniculus) M. plantaris of eight animals ranging in age from 29 to 106 days. Experimental results show that plantaris muscle belly length increases by 73%, whereas mean fascicle length and mean pennation angle increases by 39 and 14%, respectively. Those changes were incorporated into the model. In addition to the data collected for M. plantaris the predictions of the model were compared to existing literature data of rabbit M. soleus and M. gastrocnemius medialis. With an error of -1.0 ± 8.6% for relative differences in aponeurosis length, aponeurosis width, muscle height, and muscle mass, the model delivered good results matching interindividual differences. For future studies, the model could be utilized to generate realistic architectural data sets for simulation studies.


Asunto(s)
Contracción Muscular/fisiología , Músculo Esquelético/fisiología , Animales , Aponeurosis , Fenómenos Biomecánicos , Peso Corporal , Simulación por Computador , Modelos Biológicos , Conejos , Ultrasonografía
5.
J Biomech ; 112: 110054, 2020 11 09.
Artículo en Inglés | MEDLINE | ID: mdl-33096471

RESUMEN

Muscle architecture has a significant influence on the mechanical properties of skeletal muscles. Important parameters include the fascicle length, the angle of pennation, the physiological cross-sectional area (PCSA) as well as aponeurosis and tendon dimensions. During growth, skeletal muscles have to react to an increasing body mass and size demanding adaptations in muscle dimensions. Investigations of muscle architectural changes during growth are sparse, and existing studies often confine their scope to specific parameters or regions of the muscle. For this cross-sectional study, we determined the entire three-dimensional fascicle architecture of rabbit M. soleus via manual digitization. To this end, the investigations covered nine rabbits in the age-range between 29 days and 109 days. Fascicle length, muscle belly length, and aponeurosis length increased by 40%, 107%, and 111%, respectively. As the pennation angle remained almost constant and the contribution of fascicle length growth to muscle belly growth was minor, the increase in muscle mass primarily led to an increase in PCSA (462%), which required a similar increase in aponeurosis area (434%). Results gain new insight into the build-up of rabbit M. soleus and reveal that increases in muscle belly length are primarily connected to increases in aponeurosis length (83%). Contributions from fascicle length increase (17%) only play a minor role.


Asunto(s)
Músculo Esquelético , Tendones , Animales , Aponeurosis , Estudios Transversales , Músculo Esquelético/diagnóstico por imagen , Conejos , Tendones/diagnóstico por imagen
6.
J Biomech ; 103: 109694, 2020 04 16.
Artículo en Inglés | MEDLINE | ID: mdl-32147241

RESUMEN

Muscle architecture parameters change when the muscle changes in length. This has multiple effects on the function of the muscle, e.g. on force production and on contraction velocity. Here we present a versatile geometrical model that predicts changes in muscle architecture as a consequence of length changes of the muscle on the basis of the known architecture at a given muscle length. The model accounts for small changes in aponeuroses' dimensions relative to changes in fascicle length and keeps muscle volume constant. We evaluate the model on the rabbit soleus muscle by comparing model predictions of fascicle lengths and pennation angles with experimental data. For this, we determined the internal architecture of the soleus muscle at different muscle belly lengths (67.8 mm at 35° ankle angle and 59.3 mm at 80° ankle angle). The long and the short soleus muscle exhibited mean fascicle lengths and pennation angles of 20.8 ± 1.3 mm, 4 ± 2° and 13.5 ± 1 mm, 10 ± 4°, respectively. The model predicted reasonable mean fascicle lengths and pennation angles for the long and short soleus that differed only by 1 mm and 1° from the measured data, respectively. Differences between predicted and measured distributions seem to stem from interindividual variability in muscle architecture. Even if the proposed approach has been used for the soleus muscle, which is relatively simple in architecture, it is not restricted to homogeneous unipennate architectures.


Asunto(s)
Modelos Biológicos , Músculo Esquelético/anatomía & histología , Músculo Esquelético/fisiología , Animales , Conejos
SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...