This study entailed the synthesis of Ru nanocatalyst decorated on Nb-grafted SBA-15. A Nb-grafted SBA-15 support with varying Nb contents was utilized as a support for the Ru nanoparticles. The effect of Nb grafting on the immobilized Ru nanoparticle catalyst was systematically investigated, and its catalytic performance in the synthesis of furandicarboxylic acid using 5-hydroxymethylfurfural under base-free reaction conditions was evaluated. The results indicate the increased productivity of the Ru@Nb-grafted SBA-15 catalyst with a yield exceeding 95%, representing a significant advancement in catalysis. This study also affords insights into the complex relationship between the catalytic activity and selectivity and its unique surface attributes. Moreover, acidic sites were created, and the electron density within the active sites was modulated by monomeric Nb oxide species on the SBA-15. Additionally, the role of high-electron-density Ru atoms in facilitating the efficient adsorption and activation of the reactant, resulting in enhanced catalytic efficacy, was highlighted.
Cancer has emerged as a significant global health challenge, ranking as the second leading cause of death worldwide. Moreover, cancer patients frequently experience compromised immune systems, rendering them susceptible to bacterial infections. Combining anticancer and antibacterial properties in a single drug could lead to improved overall treatment outcomes and patient well-being. In this context, the present study focused on a series of hydrophilic naphthoimidazolium salts with donor groups (NI-R), aiming to create dual-functional agents with antibacterial and anticancer activities. Among these compounds, NI-TPA demonstrated notable antibacterial activity, particularly against drug-resistant bacteria, with MIC value of 7.8 µg mL-1. Furthermore, NI-TPA exhibited the most potent cytotoxicity against four different cancer cell lines, with an IC50 range of 0.67-2.01 µg mL-1. The observed high cytotoxicity of NI-TPA agreed with molecular docking and dynamic simulation studies targeting c-Met kinase protein. Additionally, NI-TPA stood out as the most promising candidate for two-photo excitation, fluorescence bioimaging, and localization in lysosomes. The study findings open new avenues for the design and development of imidazolium salts that could be employed in phototheranostic applications for cancer treatment and bacterial infections.
The development of heavy-atom-free photosensitizers (PSs) for photodynamic therapy (PDT) has encountered significant challenges in achieving simultaneous high fluorescence emission and reactive oxygen species (ROS) generation. Moreover, the limited water solubility of these PSs imposes further limitations on their biomedical applications. To overcome these obstacles, this study presents a molecular design strategy employing hydrophilic heavy-atom-free PSs based on imidazolium salts. The photophysical properties of these PSs were comprehensively investigated through a combination of experimental and theoretical analyses. Notably, among the synthesized PSs, the ethylcarbazole-naphthoimidazolium (NI-Cz) conjugate exhibited efficient fluorescence emission (ΦF = 0.22) and generation of singlet oxygen (ΦΔ = 0.49), even in highly aqueous environments. The performance of NI-Cz was validated through its application in fluorescence bioimaging and PDT treatment in HeLa cells. Furthermore, NI-Cz holds promise for two-photon excitation and type I ROS generation, nucleus localization, and selective activity against Gram-positive bacteria, thereby expanding its scope for the design of heavy-atom-free PSs and phototheranostic applications.
Photochemotherapy , Photosensitizing Agents , Humans , Photosensitizing Agents/pharmacology , Photochemotherapy/methods , HeLa Cells , Reactive Oxygen Species , Fluorescence
In this study, to obtain high performances of the dye-sensitized solar cells using the optimal TiO2 photoelectrode for the synthesized pyrazine-based organic photosensitizers, three types of TiO2 photoelectrodes were fabricated and evaluated for comparison. The double-layered nanoporous TiO2 photoelectrode (SPD type) consisted of a dispersed TiO2 layer and a transparent TiO2 layer. The single-layered nanoporous TiO2 photoelectrodes (D type and SP type) consisted of a dispersed TiO2 layer and a transparent TiO2 layer, respectively. The surface area, pore volume, and crystalline structures of the three types of TiO2 photoelectrodes were analyzed by Brunauer-Emmett-Teller method, field-emission scanning electron microscopy, and X-ray diffractometry to confirm their crystallinity and surface morphology. The structures of the three types of TiO2 photoelectrode-adsorbed organic sensitizers were investigated using X-ray photoelectron spectroscopy. The photovoltaic performances of DSSC devices using three organic photosensitizers adsorbed onto the three types of TiO2 photoelectrodes were investigated under a light intensity of 100 mW/cm2 at AM 1.5. The DSSC device using double-layered SPD type TiO2 photoelectrodes displayed 1.31â¼2.64% efficiency, compared to single-layered SP type TiO2 photoelectrodes (1.31â¼2.50%) and D type TiO2 photoelectrodes (0.90â¼1.54%), using organic photosensitizers. The DSSC device using the SPD type TiO2 photoelectrode and trifluoromethylbenzopyrazine (TPPF) as a photosensitizer showed the highest performances: J sc of 5.69 mA/cm2, V oc of 0.69 V, FF of 0.67, and efficiency of 2.64%. The relationship between photovoltaic effects and interfacial resistance characteristics of DSSCs using the three organic photosensitizers adsorbed onto the three types of TiO2 photoelectrodes could be interpreted from interfacial resistances according to frequency through impedance analysis.
Organic-inorganic hybrid perovskite nanoparticles (OIHP NPs) have attracted scientific attention owing to their efficient photoluminescence with optical tunability, which is highly advantageous for optoelectronic applications. However, the limited long-term stability of OIHP NPs has significantly hindered their practical application. Despite several synthetic strategies and encapsulation methods to stabilize OIHP NPs, complicated multi-step procedures are often required. In this study, we introduce an in situ ligand engineering method for stabilizing and controlling the optical properties of OIHP NPs using tetraalkylammonium (TAA) halides with various molecular structures at different concentrations. Our one-pot ligand engineering substantially enhanced the stability of the OIHP NPs without post-synthetic processes. Moreover, in certain cases, approximately 90% of the initial photoluminescence (PL) intensity was preserved even after a month under ambient conditions (room temperature, 20-50% relative humidity). To determine the role of ligand engineering in stabilizing the OIHP NPs, the surface binding properties of the TAA ligands were thoroughly analyzed using Raman spectroscopy. Specifically, the permanent positive charge of the TAA cations and consequent effective electrostatic interactions with the surfaces of the OIHP NPs are pivotal for preserving the initial PL intensity. Our investigation is beneficial for developing OIHP nanomaterials with improved stability and controlled photoluminescence for various optoelectronic applications, such as light-emitting devices, photosensitizers, photodetectors, photocatalysis, and solar cells.
The desire to enhance the efficiency of organic light-emitting devices (OLEDs) has driven to the investigation of advanced materials with fascinating properties. In this work, the efficiency of top-emission OLEDs (TEOLEDs) is enhanced by introducing ampicillin microstructures (Amp-MSs) with dual phases (α-/ß-phase) that induce photoluminescence (PL) and electroluminescence (EL). Moreover, Amp-MSs can adjust the charge balance by Fermi level (EF ) alignment, thereby decreasing the leakage current. The decrease in the wave-guided modes can enhance the light outcoupling through optical scattering. The resulting TEOLED demonstrates a record-high external quantum efficiency (EQE) (maximum: 68.7% and average: 63.4% at spectroradiometer; maximum: 44.8% and average: 42.6% at integrating sphere) with a wider color gamut (118%) owing to the redshift of the spectrum by J-aggregation. Deconvolution of the EL intensities is performed to clarify the contribution of Amp-MSs to the device EQE enhancement (optical scattering by Amp-MSs: 17.0%, PL by radiative energy transfer: 9.1%, and EL by J-aggregated excitons: 4.6%). The proposed TEOLED outperforms the existing frameworks in terms of device efficiency.
A fully Integrated Micropillar Polydimethylsiloxane Accurate CRISPR deTection (IMPACT) system is developed for viral DNA detection. This powerful system is patterned with high-aspect-ratio micropillars to enhance reporter probe binding. After surface modification and probe immobilization, the CRISPR-Cas12a/crRNA complex is injected into the fully enclosed microchannel. With the presence of a double-stranded DNA target, the CRISPR enzyme is activated and denatures the single-stranded DNA reporters from the micropillars. This collateral cleavage releases fluorescence reporters into the assay, and the intensity is linearly proportional to the target DNA concentration ranging from 0.1 to 10 nM. Importantly, this system does not rely on the traditional dye-quencher-labeled probe, thus reducing the fluorescence background presented in the assay. Furthermore, our one-step detection protocol is performed on-chip at isothermal conditions (37 °C) without using complicated and time-consuming off-chip probe hybridization and denaturation. This miniaturized and fully packed IMPACT chip demonstrates sensitive and accurate DNA detection within 120 min and paves ways to the next-generation point-of-care diagnostics, responding to emerging and deadly pathogen outbreaks.
Here we report the development of a high throughput, all-solution phase, and isothermal detection system for African Swine Fever Virus (ASFV). CRISPR-Cas12a programmed with a CRISPR RNA (crRNA) is used to detect ASFV target DNA. Upon ASFV DNA binding, the Cas12a/crRNA/ASFV DNA complex becomes activated and degrades a fluorescent single stranded DNA (ssDNA) reporter present in the assay. We combine this powerful CRISPR-Cas assay with a fluorescence-based point-of-care (POC) system for rapid and accurate virus detection. Without nucleic acid amplification, a detection limit of 1 pM is achieved within 2 h. In addition, the ternary Cas12a/crRNA/ASFV DNA complex is highly stable at physiological temperature and continues to cleave the ssDNA reporter even after 24 h of incubation, resulting in an improved detection limit of 100 fM. We show that this system is very specific and can differentiate nucleic acid targets with closely matched sequences. The high sensitivity and selectivity of our system enables the detection of ASFV in femtomolar range. Importantly, this system features a disposable cartridge and a sensitive custom designed fluorometer, enabling compact and simple ASFV detection, intended for low resource settings.
African Swine Fever Virus/isolation & purification , African Swine Fever/diagnosis , Biosensing Techniques , Viral Proteins/isolation & purification , African Swine Fever/virology , African Swine Fever Virus/pathogenicity , Animals , CRISPR-Cas Systems/genetics , DNA, Single-Stranded/chemistry , Fluorescence , Point-of-Care Systems , Swine , Viral Proteins/chemistry
The reaction dynamics of a photochemical reaction is typically described by reaction coordinates based on the Born-Oppenheimer (BO) approximation. A strong interaction between electrons and nuclei, conventionally occurring at conical intersections, however, breaks the BO approximation and has major consequences for the efficiency of a photochemical reaction. Despite its importance, related studies into the non-BO dynamics are scarce. Here, we investigate the non-BO dynamics of excited-state intramolecular proton transfer (ESIPT) occurring in 10-hydroxybenzo[h]quinoline (HBQ). Two coherent vibrational modes at 237 and 794 cm-1 representing molecular dynamics on a diabatic surface in HBQ are identified by a wave packet analysis based on a transient absorption measurement with a time resolution of 11 fs and with a density functional theory-based model calculation. It is also revealed that the strong Coulomb field effect in HBQ leads to the completion of ESIPT within about two cycles of the OH stretching mode. The work paves the way for time-domain studies of molecular dynamics beyond the BO approximation in other photochemical reactions.
Highly infectious illness caused by pathogens is endemic especially in developing nations where there is limited laboratory infrastructure and trained personnel. Rapid point-of-care (POC) serological assays with minimal sample manipulation and low cost are desired in clinical practice. In this study, we report an automated POC system for Ebola RNA detection with RNA-guided RNA endonuclease Cas13a, utilizing its collateral RNA degradation after its activation. After automated microfluidic mixing and hybridization, nonspecific cleavage products of Cas13a are immediately measured by a custom integrated fluorometer which is small in size and convenient for in-field diagnosis. Within 5 min, a detection limit of 20 pfu/mL (5.45 × 107 copies/mL) of purified Ebola RNA is achieved. This isothermal and fully solution-based diagnostic method is rapid, amplification-free, simple, and sensitive, thus establishing a key technology toward a useful POC diagnostic platform.
CRISPR-Cas Systems , Ebolavirus/isolation & purification , Endoribonucleases/chemistry , Microfluidic Analytical Techniques/methods , Base Sequence , Ebolavirus/genetics , Fluorometry , Lab-On-A-Chip Devices , Leptotrichia/enzymology , Limit of Detection , Microfluidic Analytical Techniques/instrumentation , Nucleic Acid Hybridization , Point-of-Care Testing , RNA, Viral/chemistry , RNA, Viral/genetics
Particulate methane monooxygenase (pMMO) is an enzyme that oxidizes methane to methanol with high activity and selectivity. Limited success has been achieved in incorporating biologically relevant ligands for the formation of such active site in a synthetic system. Here, we report the design and synthesis of metal-organic framework (MOF) catalysts inspired by pMMO for selective methane oxidation to methanol. By judicious selection of a framework with appropriate topology and chemical functionality, MOF-808 was used to postsynthetically install ligands bearing imidazole units for subsequent metalation with Cu(I) in the presence of dioxygen. The catalysts show high selectivity for methane oxidation to methanol under isothermal conditions at 150 °C. Combined spectroscopies and density functional theory calculations suggest bis(µ-oxo) dicopper species as probable active site of the catalysts.
Biomimetic Materials/chemistry , Metal-Organic Frameworks/chemistry , Methane/chemistry , Methanol/chemical synthesis , Catalysis , Copper/chemistry , Density Functional Theory , Models, Chemical , Molecular Structure , Oxidation-Reduction , Oxygen/chemistry , Oxygenases/chemistry
Hybrid organic-inorganic perovskites have attractive optoelectronic properties including exceptional solar cell performance. The improved properties of perovskites have been attributed to polaronic effects involving stabilization of localized charge character by structural deformations and polarizations. Here we examine the Pb-I structural dynamics leading to polaron formation in methylammonium lead iodide perovskite by transient absorption, time-domain Raman spectroscopy, and density functional theory. Methylammonium lead iodide perovskite exhibits excited-state coherent nuclear wave packets oscillating at ~20, ~43, and ~75 cm-1 which involve skeletal bending, in-plane bending, and c-axis stretching of the I-Pb-I bonds, respectively. The amplitudes of these wave packet motions report on the magnitude of the excited-state structural changes, in particular, the formation of a bent and elongated octahedral PbI64- geometry. We have predicted the excited-state geometry and structural changes between the neutral and polaron states using a normal-mode projection method, which supports and rationalizes the experimental results. This study reveals the polaron formation via nuclear dynamics that may be important for efficient charge separation.
The time-resolved femtosecond stimulated Raman spectra (FSRS) of a charge transfer (CT) excited noncovalent complex tetracyanoethylene:1-chloronaphthalene (TCNE:ClN) in dichloromethane (DCM) is reported with 40 fs time resolution. In the frequency domain, five FSRS peaks are observed with frequencies of 534, 858, 1069, 1392, and 1926 cm-1. The most intense peaks at 534 and 1392 cm-1 correspond to fundamentals while the features at 858, 1069, and 1926 cm-1 are attributed to a difference frequency, an overtone and a combination frequency of the fundamentals, respectively. The frequency of the 1392 cm-1 fundamental corresponding to the central CâC stretch of TCNEâ¢- is red-shifted from the frequency of the steady state radical due to the close proximity and electron affinity of the countercation. The observation of a FSRS band at a difference frequency is analyzed. This analysis lends evidence for alternative nonlinear pathways of inverse Raman gain scattering (IRGS) or vertical-FSRS (VFSRS) which may contribute to the time-evolving FSRS spectrum on-resonance. Impulsive stimulated Raman measurements of the complex show coherent oscillations of the stimulated emission with frequencies of 153, 278, and 534 cm-1. The 278 cm-1 mode corresponds to Cl bending of the dichloromethane solvent. The center frequency of the 278 cm-1 mode is modulated by a frequency of â¼30 cm-1 which is attributed to the effect of librational motion of the dichloromethane solvent as it reorganizes around the nascent contact ion pair. The 153 ± 15 cm-1 mode corresponds to an out-of-plane bending motion of TCNE. This motion modulates the intermolecular separation of the contact ion pair and thereby the overlap of the frontier orbitals which is crucial for rapid charge recombination in 5.9 ± 0.2 ps. High time-frequency resolution vibrational spectra provide unique molecular details regarding charge localization and recombination.
A microfluidic sample preparation multiplexer (SPM) and assay procedure is developed to improve amplification-free detection of Ebola virus RNA from blood. While a previous prototype successfully detected viral RNA following off-chip RNA extraction from infected cells, the new device and protocol can detect Ebola virus in raw blood with clinically relevant sensitivity. The Ebola RNA is hybridized with sequence specific capture and labeling DNA probes in solution and then the complex is pulled down onto capture beads for purification and concentration. After washing, the captured RNA target is released by irradiating the photocleavable DNA capture probe with ultraviolet (UV) light. The released, labeled, and purified RNA is detected by a sensitive and compact fluorometer. Exploiting these capabilities, a detection limit of 800 attomolar (aM) is achieved without target amplification. The new SPM can run up to 80 assays in parallel using a pneumatic multiplexing architecture. Importantly, our new protocol does not require time-consuming and problematic off-chip probe conjugation and washing. This improved SPM and labeling protocol is an important step toward a useful POC device and assay.
DNA Barcoding, Taxonomic , DNA Probes/analysis , DNA Probes/chemistry , Ebolavirus/genetics , Fluorescence , Microfluidic Analytical Techniques , RNA, Viral/blood , Humans , Microfluidic Analytical Techniques/instrumentation , Photochemical Processes
DNA is the hereditary material that contains our unique genetic code. Since the first demonstration of two-dimensional (2D) nanopatterns by using designed DNA origami â¼10 years ago, DNA has evolved into a novel technique for 2D and 3D nanopatterning. It is now being used as a template for the creation of sub-10 nm structures via either 'top-down' or 'bottom-up' approaches for various applications spanning from nanoelectronics, plasmonic sensing, and nanophotonics. This perspective starts with an histroric overview and discusses the current state-of-the-art in DNA nanolithography. Emphasis is put on the challenges and prospects of DNA nanolithography as the next generation nanomanufacturing technique.
DNA/chemistry , Nanostructures/chemistry , Particle Size , Nanostructures/ultrastructure , Nanotechnology
Raman and photoluminescence (PL) spectroscopy are used to investigate dynamic structure-function relationships in methylammonium lead iodide (MAPbI3) perovskite. The intensity of the 150 cm-1 methylammonium (MA) librational Raman mode is found to be correlated with PL intensities in microstructures of MAPbI3. Because of the strong hydrogen bond between hydrogens in MA and iodine in the PbI6 perovskite octahedra, the Raman activity of MA is very sensitive to structural distortions of the inorganic framework. The structural distortions directly influence PL intensities, which in turn have been correlated with microstructure quality. Our measurements, supported with first-principles calculations, indicate how excited-state MA librational displacements mechanistically control PL efficiency and lifetime in MAPbI3-material parameters that are likely important for efficient photovoltaic devices.
We report the intramolecular charge-transfer (ICT) dynamics of 1-tert-butyl-6-cyano-1,2,3,4-tetrahydroquinoline (NTC6), a planar analogue of 4-(dimethylamino)benzonitrile (DMABN), by using time-resolved fluorescence (TRF) and TRF spectra (TRFS). TRFS allow accurate determination of the ICT dynamics free from the spectral relaxation caused by the solvation and vibronic relaxation. For NTC6 in tetrahydrofuran (THF), the locally excited (LE) state is populated exclusively presumably via a conical intersection from the initial photoexcited S2 (La) state, and the LE state undergoes ICT single exponentially with a time constant of 1.8 ± 0.2 ps. In acetonitrile, however, both LE (22%) and ICT (78%) states are populated from the S2 state, and the population in the LE state undergoes ICT in 800 ± 100 fs. The ICT state undergoes further relaxation in 1.2 ps along the solvation and the intramolecular nuclear coordinates involving the rotation of the amino group to form a twisted ICT state. Coherent nuclear wave packet motions of 130 cm(-1), which can be assigned to the -C≡N group bending mode, were observed in the TRF of the reactant (LE) and product (ICT) states, indicating that the ICT reaction is partially coherent. Compared with DMABN, the ICT dynamics of NTC6 are quite homogeneous, and we speculated on the narrow conformational distribution of NTC6 in the ground state along the rotation of the amino group due to its rigid structure.
Intramolecular charge transfer (ICT) of DMABN has been the subject of extensive investigations. Through the measurements of highly time-resolved fluorescence spectra (TRFS) over the whole emission region, we have examined the ICT dynamics of DMABN in acetonitrile free from the solvation dynamics and vibronic relaxation. The ICT dynamics was found to be characterized by a broad range of time scales; nearly instantaneous (<30 fs), 160 fs, and 3.3 ps. TRFS revealed that an ICT state with partially twisted geometry, ICT(P), is formed within a few hundred femtoseconds either directly from the initial photoexcited state or via the locally excited (LE) state. The ICT(P) state undergoes further relaxation along the intramolecular nuclear coordinate to reach the twisted ICT (TICT) state with the time constant of 4.8 ps. A conformational diversity along the rotation of the dimethylamino group was speculated to account for the observed diffusive dynamics.
The fluorescence changes of (Fl)U moieties located at the terminal and mid-loop positions of the human i-motif sequence allow its probing as well as the sensing of G-quadruplex sequences.
DNA/chemistry , G-Quadruplexes , Nanostructures/chemistry , Uracil/analysis , Uracil/chemistry , DNA/genetics , Fluorescence , Humans , Models, Molecular , Nucleic Acid Conformation
Homogeneous oligodeoxyguanylates incorporating small-molecule intercalator pyrene moieties in a 1,5 relationship form various structures of dimer, trimer, tetramer and internal hairpin form that are yellowish in color because of the intermolecular interactions between the pyrene units.
Intercalating Agents/chemistry , Oligodeoxyribonucleotides/chemistry , Pyrenes/chemistry , Base Sequence , Models, Molecular , Molecular Structure , Nucleic Acid Conformation , Sequence Homology, Nucleic Acid , Spectrometry, Fluorescence , Spectrometry, Mass, Matrix-Assisted Laser Desorption-Ionization
